From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/pressure/mpl3115.c | 346 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 346 insertions(+) create mode 100644 drivers/iio/pressure/mpl3115.c (limited to 'drivers/iio/pressure/mpl3115.c') diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c new file mode 100644 index 000000000..72e811a5c --- /dev/null +++ b/drivers/iio/pressure/mpl3115.c @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * mpl3115.c - Support for Freescale MPL3115A2 pressure/temperature sensor + * + * Copyright (c) 2013 Peter Meerwald + * + * (7-bit I2C slave address 0x60) + * + * TODO: FIFO buffer, altimeter mode, oversampling, continuous mode, + * interrupts, user offset correction, raw mode + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MPL3115_STATUS 0x00 +#define MPL3115_OUT_PRESS 0x01 /* MSB first, 20 bit */ +#define MPL3115_OUT_TEMP 0x04 /* MSB first, 12 bit */ +#define MPL3115_WHO_AM_I 0x0c +#define MPL3115_CTRL_REG1 0x26 + +#define MPL3115_DEVICE_ID 0xc4 + +#define MPL3115_STATUS_PRESS_RDY BIT(2) +#define MPL3115_STATUS_TEMP_RDY BIT(1) + +#define MPL3115_CTRL_RESET BIT(2) /* software reset */ +#define MPL3115_CTRL_OST BIT(1) /* initiate measurement */ +#define MPL3115_CTRL_ACTIVE BIT(0) /* continuous measurement */ +#define MPL3115_CTRL_OS_258MS (BIT(5) | BIT(4)) /* 64x oversampling */ + +struct mpl3115_data { + struct i2c_client *client; + struct mutex lock; + u8 ctrl_reg1; +}; + +static int mpl3115_request(struct mpl3115_data *data) +{ + int ret, tries = 15; + + /* trigger measurement */ + ret = i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, + data->ctrl_reg1 | MPL3115_CTRL_OST); + if (ret < 0) + return ret; + + while (tries-- > 0) { + ret = i2c_smbus_read_byte_data(data->client, MPL3115_CTRL_REG1); + if (ret < 0) + return ret; + /* wait for data ready, i.e. OST cleared */ + if (!(ret & MPL3115_CTRL_OST)) + break; + msleep(20); + } + + if (tries < 0) { + dev_err(&data->client->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +static int mpl3115_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mpl3115_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + switch (chan->type) { + case IIO_PRESSURE: { /* in 0.25 pascal / LSB */ + __be32 tmp = 0; + + mutex_lock(&data->lock); + ret = mpl3115_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + break; + } + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_PRESS, 3, (u8 *) &tmp); + mutex_unlock(&data->lock); + if (ret < 0) + break; + *val = be32_to_cpu(tmp) >> chan->scan_type.shift; + ret = IIO_VAL_INT; + break; + } + case IIO_TEMP: { /* in 0.0625 celsius / LSB */ + __be16 tmp; + + mutex_lock(&data->lock); + ret = mpl3115_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + break; + } + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_TEMP, 2, (u8 *) &tmp); + mutex_unlock(&data->lock); + if (ret < 0) + break; + *val = sign_extend32(be16_to_cpu(tmp) >> chan->scan_type.shift, + chan->scan_type.realbits - 1); + ret = IIO_VAL_INT; + break; + } + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(indio_dev); + return ret; + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_PRESSURE: + *val = 0; + *val2 = 250; /* want kilopascal */ + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 0; + *val2 = 62500; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + } + return -EINVAL; +} + +static irqreturn_t mpl3115_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct mpl3115_data *data = iio_priv(indio_dev); + /* + * 32-bit channel + 16-bit channel + padding + ts + * Note that it is possible for only one of the first 2 + * channels to be enabled. If that happens, the first element + * of the buffer may be either 16 or 32-bits. As such we cannot + * use a simple structure definition to express this data layout. + */ + u8 buffer[16] __aligned(8); + int ret, pos = 0; + + mutex_lock(&data->lock); + ret = mpl3115_request(data); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + + memset(buffer, 0, sizeof(buffer)); + if (test_bit(0, indio_dev->active_scan_mask)) { + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_PRESS, 3, &buffer[pos]); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + pos += 4; + } + + if (test_bit(1, indio_dev->active_scan_mask)) { + ret = i2c_smbus_read_i2c_block_data(data->client, + MPL3115_OUT_TEMP, 2, &buffer[pos]); + if (ret < 0) { + mutex_unlock(&data->lock); + goto done; + } + } + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, + iio_get_time_ns(indio_dev)); + +done: + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static const struct iio_chan_spec mpl3115_channels[] = { + { + .type = IIO_PRESSURE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 20, + .storagebits = 32, + .shift = 12, + .endianness = IIO_BE, + } + }, + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 1, + .scan_type = { + .sign = 's', + .realbits = 12, + .storagebits = 16, + .shift = 4, + .endianness = IIO_BE, + } + }, + IIO_CHAN_SOFT_TIMESTAMP(2), +}; + +static const struct iio_info mpl3115_info = { + .read_raw = &mpl3115_read_raw, +}; + +static int mpl3115_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct mpl3115_data *data; + struct iio_dev *indio_dev; + int ret; + + ret = i2c_smbus_read_byte_data(client, MPL3115_WHO_AM_I); + if (ret < 0) + return ret; + if (ret != MPL3115_DEVICE_ID) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + mutex_init(&data->lock); + + i2c_set_clientdata(client, indio_dev); + indio_dev->info = &mpl3115_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mpl3115_channels; + indio_dev->num_channels = ARRAY_SIZE(mpl3115_channels); + + /* software reset, I2C transfer is aborted (fails) */ + i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, + MPL3115_CTRL_RESET); + msleep(50); + + data->ctrl_reg1 = MPL3115_CTRL_OS_258MS; + ret = i2c_smbus_write_byte_data(client, MPL3115_CTRL_REG1, + data->ctrl_reg1); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + mpl3115_trigger_handler, NULL); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + return 0; + +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + return ret; +} + +static int mpl3115_standby(struct mpl3115_data *data) +{ + return i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, + data->ctrl_reg1 & ~MPL3115_CTRL_ACTIVE); +} + +static void mpl3115_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + mpl3115_standby(iio_priv(indio_dev)); +} + +static int mpl3115_suspend(struct device *dev) +{ + return mpl3115_standby(iio_priv(i2c_get_clientdata( + to_i2c_client(dev)))); +} + +static int mpl3115_resume(struct device *dev) +{ + struct mpl3115_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + + return i2c_smbus_write_byte_data(data->client, MPL3115_CTRL_REG1, + data->ctrl_reg1); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(mpl3115_pm_ops, mpl3115_suspend, + mpl3115_resume); + +static const struct i2c_device_id mpl3115_id[] = { + { "mpl3115", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpl3115_id); + +static const struct of_device_id mpl3115_of_match[] = { + { .compatible = "fsl,mpl3115" }, + { } +}; +MODULE_DEVICE_TABLE(of, mpl3115_of_match); + +static struct i2c_driver mpl3115_driver = { + .driver = { + .name = "mpl3115", + .of_match_table = mpl3115_of_match, + .pm = pm_sleep_ptr(&mpl3115_pm_ops), + }, + .probe_new = mpl3115_probe, + .remove = mpl3115_remove, + .id_table = mpl3115_id, +}; +module_i2c_driver(mpl3115_driver); + +MODULE_AUTHOR("Peter Meerwald "); +MODULE_DESCRIPTION("Freescale MPL3115 pressure/temperature driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3