From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 376 ++++++++++++++++++++++ 1 file changed, 376 insertions(+) create mode 100644 drivers/iio/proximity/pulsedlight-lidar-lite-v2.c (limited to 'drivers/iio/proximity/pulsedlight-lidar-lite-v2.c') diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c new file mode 100644 index 000000000..c9eead01a --- /dev/null +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * pulsedlight-lidar-lite-v2.c - Support for PulsedLight LIDAR sensor + * + * Copyright (C) 2015, 2017-2018 + * Author: Matt Ranostay + * + * TODO: interrupt mode, and signal strength reporting + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LIDAR_REG_CONTROL 0x00 +#define LIDAR_REG_CONTROL_ACQUIRE BIT(2) + +#define LIDAR_REG_STATUS 0x01 +#define LIDAR_REG_STATUS_INVALID BIT(3) +#define LIDAR_REG_STATUS_READY BIT(0) + +#define LIDAR_REG_DATA_HBYTE 0x0f +#define LIDAR_REG_DATA_LBYTE 0x10 +#define LIDAR_REG_DATA_WORD_READ BIT(7) + +#define LIDAR_REG_PWR_CONTROL 0x65 + +#define LIDAR_DRV_NAME "lidar" + +struct lidar_data { + struct iio_dev *indio_dev; + struct i2c_client *client; + + int (*xfer)(struct lidar_data *data, u8 reg, u8 *val, int len); + int i2c_enabled; + + /* Ensure timestamp is naturally aligned */ + struct { + u16 chan; + s64 timestamp __aligned(8); + } scan; +}; + +static const struct iio_chan_spec lidar_channels[] = { + { + .type = IIO_DISTANCE, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 16, + .storagebits = 16, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), +}; + +static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len) +{ + struct i2c_client *client = data->client; + struct i2c_msg msg[2]; + int ret; + + msg[0].addr = client->addr; + msg[0].flags = client->flags | I2C_M_STOP; + msg[0].len = 1; + msg[0].buf = (char *) ® + + msg[1].addr = client->addr; + msg[1].flags = client->flags | I2C_M_RD; + msg[1].len = len; + msg[1].buf = (char *) val; + + ret = i2c_transfer(client->adapter, msg, 2); + + return (ret == 2) ? 0 : -EIO; +} + +static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len) +{ + struct i2c_client *client = data->client; + int ret; + + /* + * Device needs a STOP condition between address write, and data read + * so in turn i2c_smbus_read_byte_data cannot be used + */ + + while (len--) { + ret = i2c_smbus_write_byte(client, reg++); + if (ret < 0) { + dev_err(&client->dev, "cannot write addr value"); + return ret; + } + + ret = i2c_smbus_read_byte(client); + if (ret < 0) { + dev_err(&client->dev, "cannot read data value"); + return ret; + } + + *(val++) = ret; + } + + return 0; +} + +static int lidar_read_byte(struct lidar_data *data, u8 reg) +{ + int ret; + u8 val; + + ret = data->xfer(data, reg, &val, 1); + if (ret < 0) + return ret; + + return val; +} + +static inline int lidar_write_control(struct lidar_data *data, int val) +{ + return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, val); +} + +static inline int lidar_write_power(struct lidar_data *data, int val) +{ + return i2c_smbus_write_byte_data(data->client, + LIDAR_REG_PWR_CONTROL, val); +} + +static int lidar_read_measurement(struct lidar_data *data, u16 *reg) +{ + __be16 value; + int ret = data->xfer(data, LIDAR_REG_DATA_HBYTE | + (data->i2c_enabled ? LIDAR_REG_DATA_WORD_READ : 0), + (u8 *) &value, 2); + + if (!ret) + *reg = be16_to_cpu(value); + + return ret; +} + +static int lidar_get_measurement(struct lidar_data *data, u16 *reg) +{ + struct i2c_client *client = data->client; + int tries = 10; + int ret; + + ret = pm_runtime_resume_and_get(&client->dev); + if (ret < 0) + return ret; + + /* start sample */ + ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE); + if (ret < 0) { + dev_err(&client->dev, "cannot send start measurement command"); + pm_runtime_put_noidle(&client->dev); + return ret; + } + + while (tries--) { + usleep_range(1000, 2000); + + ret = lidar_read_byte(data, LIDAR_REG_STATUS); + if (ret < 0) + break; + + /* return -EINVAL since laser is likely pointed out of range */ + if (ret & LIDAR_REG_STATUS_INVALID) { + *reg = 0; + ret = -EINVAL; + break; + } + + /* sample ready to read */ + if (!(ret & LIDAR_REG_STATUS_READY)) { + ret = lidar_read_measurement(data, reg); + break; + } + ret = -EIO; + } + pm_runtime_mark_last_busy(&client->dev); + pm_runtime_put_autosuspend(&client->dev); + + return ret; +} + +static int lidar_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct lidar_data *data = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + u16 reg; + + if (iio_device_claim_direct_mode(indio_dev)) + return -EBUSY; + + ret = lidar_get_measurement(data, ®); + if (!ret) { + *val = reg; + ret = IIO_VAL_INT; + } + iio_device_release_direct_mode(indio_dev); + break; + } + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = 10000; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + } + + return ret; +} + +static irqreturn_t lidar_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct lidar_data *data = iio_priv(indio_dev); + int ret; + + ret = lidar_get_measurement(data, &data->scan.chan); + if (!ret) { + iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, + iio_get_time_ns(indio_dev)); + } else if (ret != -EINVAL) { + dev_err(&data->client->dev, "cannot read LIDAR measurement"); + } + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static const struct iio_info lidar_info = { + .read_raw = lidar_read_raw, +}; + +static int lidar_probe(struct i2c_client *client) +{ + struct lidar_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + data = iio_priv(indio_dev); + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + data->xfer = lidar_i2c_xfer; + data->i2c_enabled = 1; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE)) + data->xfer = lidar_smbus_xfer; + else + return -EOPNOTSUPP; + + indio_dev->info = &lidar_info; + indio_dev->name = LIDAR_DRV_NAME; + indio_dev->channels = lidar_channels; + indio_dev->num_channels = ARRAY_SIZE(lidar_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + i2c_set_clientdata(client, indio_dev); + + data->client = client; + data->indio_dev = indio_dev; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + lidar_trigger_handler, NULL); + if (ret) + return ret; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_unreg_buffer; + + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + + ret = pm_runtime_set_active(&client->dev); + if (ret) + goto error_unreg_buffer; + pm_runtime_enable(&client->dev); + pm_runtime_idle(&client->dev); + + return 0; + +error_unreg_buffer: + iio_triggered_buffer_cleanup(indio_dev); + + return ret; +} + +static void lidar_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); +} + +static const struct i2c_device_id lidar_id[] = { + {"lidar-lite-v2", 0}, + {"lidar-lite-v3", 0}, + { }, +}; +MODULE_DEVICE_TABLE(i2c, lidar_id); + +static const struct of_device_id lidar_dt_ids[] = { + { .compatible = "pulsedlight,lidar-lite-v2" }, + { .compatible = "grmn,lidar-lite-v3" }, + { } +}; +MODULE_DEVICE_TABLE(of, lidar_dt_ids); + +static int lidar_pm_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct lidar_data *data = iio_priv(indio_dev); + + return lidar_write_power(data, 0x0f); +} + +static int lidar_pm_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct lidar_data *data = iio_priv(indio_dev); + int ret = lidar_write_power(data, 0); + + /* regulator and FPGA needs settling time */ + usleep_range(15000, 20000); + + return ret; +} + +static const struct dev_pm_ops lidar_pm_ops = { + RUNTIME_PM_OPS(lidar_pm_runtime_suspend, lidar_pm_runtime_resume, NULL) +}; + +static struct i2c_driver lidar_driver = { + .driver = { + .name = LIDAR_DRV_NAME, + .of_match_table = lidar_dt_ids, + .pm = pm_ptr(&lidar_pm_ops), + }, + .probe_new = lidar_probe, + .remove = lidar_remove, + .id_table = lidar_id, +}; +module_i2c_driver(lidar_driver); + +MODULE_AUTHOR("Matt Ranostay "); +MODULE_DESCRIPTION("PulsedLight LIDAR sensor"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3