From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/infiniband/hw/hfi1/exp_rcv.h | 170 +++++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 drivers/infiniband/hw/hfi1/exp_rcv.h (limited to 'drivers/infiniband/hw/hfi1/exp_rcv.h') diff --git a/drivers/infiniband/hw/hfi1/exp_rcv.h b/drivers/infiniband/hw/hfi1/exp_rcv.h new file mode 100644 index 000000000..c6291bbf7 --- /dev/null +++ b/drivers/infiniband/hw/hfi1/exp_rcv.h @@ -0,0 +1,170 @@ +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* + * Copyright(c) 2017 Intel Corporation. + */ + +#ifndef _HFI1_EXP_RCV_H +#define _HFI1_EXP_RCV_H +#include "hfi.h" + +#define EXP_TID_SET_EMPTY(set) (set.count == 0 && list_empty(&set.list)) + +#define EXP_TID_TIDLEN_MASK 0x7FFULL +#define EXP_TID_TIDLEN_SHIFT 0 +#define EXP_TID_TIDCTRL_MASK 0x3ULL +#define EXP_TID_TIDCTRL_SHIFT 20 +#define EXP_TID_TIDIDX_MASK 0x3FFULL +#define EXP_TID_TIDIDX_SHIFT 22 +#define EXP_TID_GET(tid, field) \ + (((tid) >> EXP_TID_TID##field##_SHIFT) & EXP_TID_TID##field##_MASK) + +#define EXP_TID_SET(field, value) \ + (((value) & EXP_TID_TID##field##_MASK) << \ + EXP_TID_TID##field##_SHIFT) +#define EXP_TID_CLEAR(tid, field) ({ \ + (tid) &= ~(EXP_TID_TID##field##_MASK << \ + EXP_TID_TID##field##_SHIFT); \ + }) +#define EXP_TID_RESET(tid, field, value) do { \ + EXP_TID_CLEAR(tid, field); \ + (tid) |= EXP_TID_SET(field, (value)); \ + } while (0) + +/* + * Define fields in the KDETH header so we can update the header + * template. + */ +#define KDETH_OFFSET_SHIFT 0 +#define KDETH_OFFSET_MASK 0x7fff +#define KDETH_OM_SHIFT 15 +#define KDETH_OM_MASK 0x1 +#define KDETH_TID_SHIFT 16 +#define KDETH_TID_MASK 0x3ff +#define KDETH_TIDCTRL_SHIFT 26 +#define KDETH_TIDCTRL_MASK 0x3 +#define KDETH_INTR_SHIFT 28 +#define KDETH_INTR_MASK 0x1 +#define KDETH_SH_SHIFT 29 +#define KDETH_SH_MASK 0x1 +#define KDETH_KVER_SHIFT 30 +#define KDETH_KVER_MASK 0x3 +#define KDETH_JKEY_SHIFT 0x0 +#define KDETH_JKEY_MASK 0xff +#define KDETH_HCRC_UPPER_SHIFT 16 +#define KDETH_HCRC_UPPER_MASK 0xff +#define KDETH_HCRC_LOWER_SHIFT 24 +#define KDETH_HCRC_LOWER_MASK 0xff + +#define KDETH_GET(val, field) \ + (((le32_to_cpu((val))) >> KDETH_##field##_SHIFT) & KDETH_##field##_MASK) +#define KDETH_SET(dw, field, val) do { \ + u32 dwval = le32_to_cpu(dw); \ + dwval &= ~(KDETH_##field##_MASK << KDETH_##field##_SHIFT); \ + dwval |= (((val) & KDETH_##field##_MASK) << \ + KDETH_##field##_SHIFT); \ + dw = cpu_to_le32(dwval); \ + } while (0) + +#define KDETH_RESET(dw, field, val) ({ dw = 0; KDETH_SET(dw, field, val); }) + +/* KDETH OM multipliers and switch over point */ +#define KDETH_OM_SMALL 4 +#define KDETH_OM_SMALL_SHIFT 2 +#define KDETH_OM_LARGE 64 +#define KDETH_OM_LARGE_SHIFT 6 +#define KDETH_OM_MAX_SIZE (1 << ((KDETH_OM_LARGE / KDETH_OM_SMALL) + 1)) + +struct tid_group { + struct list_head list; + u32 base; + u8 size; + u8 used; + u8 map; +}; + +/* + * Write an "empty" RcvArray entry. + * This function exists so the TID registaration code can use it + * to write to unused/unneeded entries and still take advantage + * of the WC performance improvements. The HFI will ignore this + * write to the RcvArray entry. + */ +static inline void rcv_array_wc_fill(struct hfi1_devdata *dd, u32 index) +{ + /* + * Doing the WC fill writes only makes sense if the device is + * present and the RcvArray has been mapped as WC memory. + */ + if ((dd->flags & HFI1_PRESENT) && dd->rcvarray_wc) { + writeq(0, dd->rcvarray_wc + (index * 8)); + if ((index & 3) == 3) + flush_wc(); + } +} + +static inline void tid_group_add_tail(struct tid_group *grp, + struct exp_tid_set *set) +{ + list_add_tail(&grp->list, &set->list); + set->count++; +} + +static inline void tid_group_remove(struct tid_group *grp, + struct exp_tid_set *set) +{ + list_del_init(&grp->list); + set->count--; +} + +static inline void tid_group_move(struct tid_group *group, + struct exp_tid_set *s1, + struct exp_tid_set *s2) +{ + tid_group_remove(group, s1); + tid_group_add_tail(group, s2); +} + +static inline struct tid_group *tid_group_pop(struct exp_tid_set *set) +{ + struct tid_group *grp = + list_first_entry(&set->list, struct tid_group, list); + list_del_init(&grp->list); + set->count--; + return grp; +} + +static inline u32 rcventry2tidinfo(u32 rcventry) +{ + u32 pair = rcventry & ~0x1; + + return EXP_TID_SET(IDX, pair >> 1) | + EXP_TID_SET(CTRL, 1 << (rcventry - pair)); +} + +/** + * hfi1_tid_group_to_idx - convert an index to a group + * @rcd - the receive context + * @grp - the group pointer + */ +static inline u16 +hfi1_tid_group_to_idx(struct hfi1_ctxtdata *rcd, struct tid_group *grp) +{ + return grp - &rcd->groups[0]; +} + +/** + * hfi1_idx_to_tid_group - convert a group to an index + * @rcd - the receive context + * @idx - the index + */ +static inline struct tid_group * +hfi1_idx_to_tid_group(struct hfi1_ctxtdata *rcd, u16 idx) +{ + return &rcd->groups[idx]; +} + +int hfi1_alloc_ctxt_rcv_groups(struct hfi1_ctxtdata *rcd); +void hfi1_free_ctxt_rcv_groups(struct hfi1_ctxtdata *rcd); +void hfi1_exp_tid_group_init(struct hfi1_ctxtdata *rcd); + +#endif /* _HFI1_EXP_RCV_H */ -- cgit v1.2.3