From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/infiniband/hw/hfi1/mad.h | 437 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 437 insertions(+) create mode 100644 drivers/infiniband/hw/hfi1/mad.h (limited to 'drivers/infiniband/hw/hfi1/mad.h') diff --git a/drivers/infiniband/hw/hfi1/mad.h b/drivers/infiniband/hw/hfi1/mad.h new file mode 100644 index 000000000..1d45a008f --- /dev/null +++ b/drivers/infiniband/hw/hfi1/mad.h @@ -0,0 +1,437 @@ +/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */ +/* + * Copyright(c) 2015 - 2017 Intel Corporation. + */ + +#ifndef _HFI1_MAD_H +#define _HFI1_MAD_H + +#include +#include +#include +#include "opa_compat.h" + +/* + * OPA Traps + */ +#define OPA_TRAP_GID_NOW_IN_SERVICE cpu_to_be16(64) +#define OPA_TRAP_GID_OUT_OF_SERVICE cpu_to_be16(65) +#define OPA_TRAP_ADD_MULTICAST_GROUP cpu_to_be16(66) +#define OPA_TRAL_DEL_MULTICAST_GROUP cpu_to_be16(67) +#define OPA_TRAP_UNPATH cpu_to_be16(68) +#define OPA_TRAP_REPATH cpu_to_be16(69) +#define OPA_TRAP_PORT_CHANGE_STATE cpu_to_be16(128) +#define OPA_TRAP_LINK_INTEGRITY cpu_to_be16(129) +#define OPA_TRAP_EXCESSIVE_BUFFER_OVERRUN cpu_to_be16(130) +#define OPA_TRAP_FLOW_WATCHDOG cpu_to_be16(131) +#define OPA_TRAP_CHANGE_CAPABILITY cpu_to_be16(144) +#define OPA_TRAP_CHANGE_SYSGUID cpu_to_be16(145) +#define OPA_TRAP_BAD_M_KEY cpu_to_be16(256) +#define OPA_TRAP_BAD_P_KEY cpu_to_be16(257) +#define OPA_TRAP_BAD_Q_KEY cpu_to_be16(258) +#define OPA_TRAP_SWITCH_BAD_PKEY cpu_to_be16(259) +#define OPA_SMA_TRAP_DATA_LINK_WIDTH cpu_to_be16(2048) + +/* + * Generic trap/notice other local changes flags (trap 144). + */ +#define OPA_NOTICE_TRAP_LWDE_CHG 0x08 /* Link Width Downgrade Enable + * changed + */ +#define OPA_NOTICE_TRAP_LSE_CHG 0x04 /* Link Speed Enable changed */ +#define OPA_NOTICE_TRAP_LWE_CHG 0x02 /* Link Width Enable changed */ +#define OPA_NOTICE_TRAP_NODE_DESC_CHG 0x01 + +struct opa_mad_notice_attr { + u8 generic_type; + u8 prod_type_msb; + __be16 prod_type_lsb; + __be16 trap_num; + __be16 toggle_count; + __be32 issuer_lid; + __be32 reserved1; + union ib_gid issuer_gid; + + union { + struct { + u8 details[64]; + } raw_data; + + struct { + union ib_gid gid; + } __packed ntc_64_65_66_67; + + struct { + __be32 lid; + } __packed ntc_128; + + struct { + __be32 lid; /* where violation happened */ + u8 port_num; /* where violation happened */ + } __packed ntc_129_130_131; + + struct { + __be32 lid; /* LID where change occurred */ + __be32 new_cap_mask; /* new capability mask */ + __be16 reserved2; + __be16 cap_mask3; + __be16 change_flags; /* low 4 bits only */ + } __packed ntc_144; + + struct { + __be64 new_sys_guid; + __be32 lid; /* lid where sys guid changed */ + } __packed ntc_145; + + struct { + __be32 lid; + __be32 dr_slid; + u8 method; + u8 dr_trunc_hop; + __be16 attr_id; + __be32 attr_mod; + __be64 mkey; + u8 dr_rtn_path[30]; + } __packed ntc_256; + + struct { + __be32 lid1; + __be32 lid2; + __be32 key; + u8 sl; /* SL: high 5 bits */ + u8 reserved3[3]; + union ib_gid gid1; + union ib_gid gid2; + __be32 qp1; /* high 8 bits reserved */ + __be32 qp2; /* high 8 bits reserved */ + } __packed ntc_257_258; + + struct { + __be16 flags; /* low 8 bits reserved */ + __be16 pkey; + __be32 lid1; + __be32 lid2; + u8 sl; /* SL: high 5 bits */ + u8 reserved4[3]; + union ib_gid gid1; + union ib_gid gid2; + __be32 qp1; /* high 8 bits reserved */ + __be32 qp2; /* high 8 bits reserved */ + } __packed ntc_259; + + struct { + __be32 lid; + } __packed ntc_2048; + + }; + u8 class_data[]; +}; + +#define IB_VLARB_LOWPRI_0_31 1 +#define IB_VLARB_LOWPRI_32_63 2 +#define IB_VLARB_HIGHPRI_0_31 3 +#define IB_VLARB_HIGHPRI_32_63 4 + +#define OPA_MAX_PREEMPT_CAP 32 +#define OPA_VLARB_LOW_ELEMENTS 0 +#define OPA_VLARB_HIGH_ELEMENTS 1 +#define OPA_VLARB_PREEMPT_ELEMENTS 2 +#define OPA_VLARB_PREEMPT_MATRIX 3 + +#define IB_PMA_PORT_COUNTERS_CONG cpu_to_be16(0xFF00) +#define LINK_SPEED_25G 1 +#define LINK_SPEED_12_5G 2 +#define LINK_WIDTH_DEFAULT 4 +#define DECIMAL_FACTORING 1000 +/* + * The default link width is multiplied by 1000 + * to get accurate value after division. + */ +#define FACTOR_LINK_WIDTH (LINK_WIDTH_DEFAULT * DECIMAL_FACTORING) + +struct ib_pma_portcounters_cong { + u8 reserved; + u8 reserved1; + __be16 port_check_rate; + __be16 symbol_error_counter; + u8 link_error_recovery_counter; + u8 link_downed_counter; + __be16 port_rcv_errors; + __be16 port_rcv_remphys_errors; + __be16 port_rcv_switch_relay_errors; + __be16 port_xmit_discards; + u8 port_xmit_constraint_errors; + u8 port_rcv_constraint_errors; + u8 reserved2; + u8 link_overrun_errors; /* LocalLink: 7:4, BufferOverrun: 3:0 */ + __be16 reserved3; + __be16 vl15_dropped; + __be64 port_xmit_data; + __be64 port_rcv_data; + __be64 port_xmit_packets; + __be64 port_rcv_packets; + __be64 port_xmit_wait; + __be64 port_adr_events; +} __packed; + +#define IB_SMP_UNSUP_VERSION cpu_to_be16(0x0004) +#define IB_SMP_UNSUP_METHOD cpu_to_be16(0x0008) +#define IB_SMP_UNSUP_METH_ATTR cpu_to_be16(0x000C) +#define IB_SMP_INVALID_FIELD cpu_to_be16(0x001C) + +#define OPA_MAX_PREEMPT_CAP 32 +#define OPA_VLARB_LOW_ELEMENTS 0 +#define OPA_VLARB_HIGH_ELEMENTS 1 +#define OPA_VLARB_PREEMPT_ELEMENTS 2 +#define OPA_VLARB_PREEMPT_MATRIX 3 + +#define HFI1_XMIT_RATE_UNSUPPORTED 0x0 +#define HFI1_XMIT_RATE_PICO 0x7 +/* number of 4nsec cycles equaling 2secs */ +#define HFI1_CONG_TIMER_PSINTERVAL 0x1DCD64EC + +#define IB_CC_SVCTYPE_RC 0x0 +#define IB_CC_SVCTYPE_UC 0x1 +#define IB_CC_SVCTYPE_RD 0x2 +#define IB_CC_SVCTYPE_UD 0x3 + +/* + * There should be an equivalent IB #define for the following, but + * I cannot find it. + */ +#define OPA_CC_LOG_TYPE_HFI 2 + +struct opa_hfi1_cong_log_event_internal { + u32 lqpn; + u32 rqpn; + u8 sl; + u8 svc_type; + u32 rlid; + u64 timestamp; /* wider than 32 bits to detect 32 bit rollover */ +}; + +struct opa_hfi1_cong_log_event { + u8 local_qp_cn_entry[3]; + u8 remote_qp_number_cn_entry[3]; + u8 sl_svc_type_cn_entry; /* 5 bits SL, 3 bits svc type */ + u8 reserved; + __be32 remote_lid_cn_entry; + __be32 timestamp_cn_entry; +} __packed; + +#define OPA_CONG_LOG_ELEMS 96 + +struct opa_hfi1_cong_log { + u8 log_type; + u8 congestion_flags; + __be16 threshold_event_counter; + __be32 current_time_stamp; + u8 threshold_cong_event_map[OPA_MAX_SLS / 8]; + struct opa_hfi1_cong_log_event events[OPA_CONG_LOG_ELEMS]; +} __packed; + +#define IB_CC_TABLE_CAP_DEFAULT 31 + +/* Port control flags */ +#define IB_CC_CCS_PC_SL_BASED 0x01 + +struct opa_congestion_setting_entry { + u8 ccti_increase; + u8 reserved; + __be16 ccti_timer; + u8 trigger_threshold; + u8 ccti_min; /* min CCTI for cc table */ +} __packed; + +struct opa_congestion_setting_entry_shadow { + u8 ccti_increase; + u8 reserved; + u16 ccti_timer; + u8 trigger_threshold; + u8 ccti_min; /* min CCTI for cc table */ +} __packed; + +struct opa_congestion_setting_attr { + __be32 control_map; + __be16 port_control; + struct opa_congestion_setting_entry entries[OPA_MAX_SLS]; +} __packed; + +struct opa_congestion_setting_attr_shadow { + u32 control_map; + u16 port_control; + struct opa_congestion_setting_entry_shadow entries[OPA_MAX_SLS]; +} __packed; + +#define IB_CC_TABLE_ENTRY_INCREASE_DEFAULT 1 +#define IB_CC_TABLE_ENTRY_TIMER_DEFAULT 1 + +/* 64 Congestion Control table entries in a single MAD */ +#define IB_CCT_ENTRIES 64 +#define IB_CCT_MIN_ENTRIES (IB_CCT_ENTRIES * 2) + +struct ib_cc_table_entry { + __be16 entry; /* shift:2, multiplier:14 */ +}; + +struct ib_cc_table_entry_shadow { + u16 entry; /* shift:2, multiplier:14 */ +}; + +struct ib_cc_table_attr { + __be16 ccti_limit; /* max CCTI for cc table */ + struct ib_cc_table_entry ccti_entries[IB_CCT_ENTRIES]; +} __packed; + +struct ib_cc_table_attr_shadow { + u16 ccti_limit; /* max CCTI for cc table */ + struct ib_cc_table_entry_shadow ccti_entries[IB_CCT_ENTRIES]; +} __packed; + +#define CC_TABLE_SHADOW_MAX \ + (IB_CC_TABLE_CAP_DEFAULT * IB_CCT_ENTRIES) + +struct cc_table_shadow { + u16 ccti_limit; /* max CCTI for cc table */ + struct ib_cc_table_entry_shadow entries[CC_TABLE_SHADOW_MAX]; +} __packed; + +/* + * struct cc_state combines the (active) per-port congestion control + * table, and the (active) per-SL congestion settings. cc_state data + * may need to be read in code paths that we want to be fast, so it + * is an RCU protected structure. + */ +struct cc_state { + struct rcu_head rcu; + struct cc_table_shadow cct; + struct opa_congestion_setting_attr_shadow cong_setting; +}; + +/* + * OPA BufferControl MAD + */ + +/* attribute modifier macros */ +#define OPA_AM_NPORT_SHIFT 24 +#define OPA_AM_NPORT_MASK 0xff +#define OPA_AM_NPORT_SMASK (OPA_AM_NPORT_MASK << OPA_AM_NPORT_SHIFT) +#define OPA_AM_NPORT(am) (((am) >> OPA_AM_NPORT_SHIFT) & \ + OPA_AM_NPORT_MASK) + +#define OPA_AM_NBLK_SHIFT 24 +#define OPA_AM_NBLK_MASK 0xff +#define OPA_AM_NBLK_SMASK (OPA_AM_NBLK_MASK << OPA_AM_NBLK_SHIFT) +#define OPA_AM_NBLK(am) (((am) >> OPA_AM_NBLK_SHIFT) & \ + OPA_AM_NBLK_MASK) + +#define OPA_AM_START_BLK_SHIFT 0 +#define OPA_AM_START_BLK_MASK 0xff +#define OPA_AM_START_BLK_SMASK (OPA_AM_START_BLK_MASK << \ + OPA_AM_START_BLK_SHIFT) +#define OPA_AM_START_BLK(am) (((am) >> OPA_AM_START_BLK_SHIFT) & \ + OPA_AM_START_BLK_MASK) + +#define OPA_AM_PORTNUM_SHIFT 0 +#define OPA_AM_PORTNUM_MASK 0xff +#define OPA_AM_PORTNUM_SMASK (OPA_AM_PORTNUM_MASK << OPA_AM_PORTNUM_SHIFT) +#define OPA_AM_PORTNUM(am) (((am) >> OPA_AM_PORTNUM_SHIFT) & \ + OPA_AM_PORTNUM_MASK) + +#define OPA_AM_ASYNC_SHIFT 12 +#define OPA_AM_ASYNC_MASK 0x1 +#define OPA_AM_ASYNC_SMASK (OPA_AM_ASYNC_MASK << OPA_AM_ASYNC_SHIFT) +#define OPA_AM_ASYNC(am) (((am) >> OPA_AM_ASYNC_SHIFT) & \ + OPA_AM_ASYNC_MASK) + +#define OPA_AM_START_SM_CFG_SHIFT 9 +#define OPA_AM_START_SM_CFG_MASK 0x1 +#define OPA_AM_START_SM_CFG_SMASK (OPA_AM_START_SM_CFG_MASK << \ + OPA_AM_START_SM_CFG_SHIFT) +#define OPA_AM_START_SM_CFG(am) (((am) >> OPA_AM_START_SM_CFG_SHIFT) \ + & OPA_AM_START_SM_CFG_MASK) + +#define OPA_AM_CI_ADDR_SHIFT 19 +#define OPA_AM_CI_ADDR_MASK 0xfff +#define OPA_AM_CI_ADDR_SMASK (OPA_AM_CI_ADDR_MASK << OPA_CI_ADDR_SHIFT) +#define OPA_AM_CI_ADDR(am) (((am) >> OPA_AM_CI_ADDR_SHIFT) & \ + OPA_AM_CI_ADDR_MASK) + +#define OPA_AM_CI_LEN_SHIFT 13 +#define OPA_AM_CI_LEN_MASK 0x3f +#define OPA_AM_CI_LEN_SMASK (OPA_AM_CI_LEN_MASK << OPA_CI_LEN_SHIFT) +#define OPA_AM_CI_LEN(am) (((am) >> OPA_AM_CI_LEN_SHIFT) & \ + OPA_AM_CI_LEN_MASK) + +/* error info macros */ +#define OPA_EI_STATUS_SMASK 0x80 +#define OPA_EI_CODE_SMASK 0x0f + +struct vl_limit { + __be16 dedicated; + __be16 shared; +}; + +struct buffer_control { + __be16 reserved; + __be16 overall_shared_limit; + struct vl_limit vl[OPA_MAX_VLS]; +}; + +struct sc2vlnt { + u8 vlnt[32]; /* 5 bit VL, 3 bits reserved */ +}; + +/* + * The PortSamplesControl.CounterMasks field is an array of 3 bit fields + * which specify the N'th counter's capabilities. See ch. 16.1.3.2. + * We support 5 counters which only count the mandatory quantities. + */ +#define COUNTER_MASK(q, n) (q << ((9 - n) * 3)) +#define COUNTER_MASK0_9 \ + cpu_to_be32(COUNTER_MASK(1, 0) | \ + COUNTER_MASK(1, 1) | \ + COUNTER_MASK(1, 2) | \ + COUNTER_MASK(1, 3) | \ + COUNTER_MASK(1, 4)) + +void hfi1_event_pkey_change(struct hfi1_devdata *dd, u32 port); +void hfi1_handle_trap_timer(struct timer_list *t); +u16 tx_link_width(u16 link_width); +u64 get_xmit_wait_counters(struct hfi1_pportdata *ppd, u16 link_width, + u16 link_speed, int vl); +/** + * get_link_speed - determine whether 12.5G or 25G speed + * @link_speed: the speed of active link + * @return: Return 2 if link speed identified as 12.5G + * or return 1 if link speed is 25G. + * + * The function indirectly calculate required link speed + * value for convert_xmit_counter function. If the link + * speed is 25G, the function return as 1 as it is required + * by xmit counter conversion formula :-( 25G / link_speed). + * This conversion will provide value 1 if current + * link speed is 25G or 2 if 12.5G.This is done to avoid + * 12.5 float number conversion. + */ +static inline u16 get_link_speed(u16 link_speed) +{ + return (link_speed == 1) ? + LINK_SPEED_12_5G : LINK_SPEED_25G; +} + +/** + * convert_xmit_counter - calculate flit times for given xmit counter + * value + * @xmit_wait_val: current xmit counter value + * @link_width: width of active link + * @link_speed: speed of active link + * @return: return xmit counter value in flit times. + */ +static inline u64 convert_xmit_counter(u64 xmit_wait_val, u16 link_width, + u16 link_speed) +{ + return (xmit_wait_val * 2 * (FACTOR_LINK_WIDTH / link_width) + * link_speed) / DECIMAL_FACTORING; +} +#endif /* _HFI1_MAD_H */ -- cgit v1.2.3