From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/joystick/adc-joystick.c | 306 ++++++++++++++++++++++++++++++++++ 1 file changed, 306 insertions(+) create mode 100644 drivers/input/joystick/adc-joystick.c (limited to 'drivers/input/joystick/adc-joystick.c') diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c new file mode 100644 index 000000000..c0deff5d4 --- /dev/null +++ b/drivers/input/joystick/adc-joystick.c @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Input driver for joysticks connected over ADC. + * Copyright (c) 2019-2020 Artur Rojek + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +struct adc_joystick_axis { + u32 code; + s32 range[2]; + s32 fuzz; + s32 flat; +}; + +struct adc_joystick { + struct input_dev *input; + struct iio_cb_buffer *buffer; + struct adc_joystick_axis *axes; + struct iio_channel *chans; + int num_chans; + bool polled; +}; + +static void adc_joystick_poll(struct input_dev *input) +{ + struct adc_joystick *joy = input_get_drvdata(input); + int i, val, ret; + + for (i = 0; i < joy->num_chans; i++) { + ret = iio_read_channel_raw(&joy->chans[i], &val); + if (ret < 0) + return; + input_report_abs(input, joy->axes[i].code, val); + } + input_sync(input); +} + +static int adc_joystick_handle(const void *data, void *private) +{ + struct adc_joystick *joy = private; + enum iio_endian endianness; + int bytes, msb, val, idx, i; + const u16 *data_u16; + bool sign; + + bytes = joy->chans[0].channel->scan_type.storagebits >> 3; + + for (i = 0; i < joy->num_chans; ++i) { + idx = joy->chans[i].channel->scan_index; + endianness = joy->chans[i].channel->scan_type.endianness; + msb = joy->chans[i].channel->scan_type.realbits - 1; + sign = tolower(joy->chans[i].channel->scan_type.sign) == 's'; + + switch (bytes) { + case 1: + val = ((const u8 *)data)[idx]; + break; + case 2: + data_u16 = (const u16 *)data + idx; + + /* + * Data is aligned to the sample size by IIO core. + * Call `get_unaligned_xe16` to hide type casting. + */ + if (endianness == IIO_BE) + val = get_unaligned_be16(data_u16); + else if (endianness == IIO_LE) + val = get_unaligned_le16(data_u16); + else /* IIO_CPU */ + val = *data_u16; + break; + default: + return -EINVAL; + } + + val >>= joy->chans[i].channel->scan_type.shift; + if (sign) + val = sign_extend32(val, msb); + else + val &= GENMASK(msb, 0); + input_report_abs(joy->input, joy->axes[i].code, val); + } + + input_sync(joy->input); + + return 0; +} + +static int adc_joystick_open(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + struct device *devp = &dev->dev; + int ret; + + ret = iio_channel_start_all_cb(joy->buffer); + if (ret) + dev_err(devp, "Unable to start callback buffer: %d\n", ret); + + return ret; +} + +static void adc_joystick_close(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + + iio_channel_stop_all_cb(joy->buffer); +} + +static void adc_joystick_cleanup(void *data) +{ + iio_channel_release_all_cb(data); +} + +static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) +{ + struct adc_joystick_axis *axes; + struct fwnode_handle *child; + int num_axes, error, i; + + num_axes = device_get_child_node_count(dev); + if (!num_axes) { + dev_err(dev, "Unable to find child nodes\n"); + return -EINVAL; + } + + if (num_axes != joy->num_chans) { + dev_err(dev, "Got %d child nodes for %d channels\n", + num_axes, joy->num_chans); + return -EINVAL; + } + + axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL); + if (!axes) + return -ENOMEM; + + device_for_each_child_node(dev, child) { + error = fwnode_property_read_u32(child, "reg", &i); + if (error) { + dev_err(dev, "reg invalid or missing\n"); + goto err_fwnode_put; + } + + if (i >= num_axes) { + error = -EINVAL; + dev_err(dev, "No matching axis for reg %d\n", i); + goto err_fwnode_put; + } + + error = fwnode_property_read_u32(child, "linux,code", + &axes[i].code); + if (error) { + dev_err(dev, "linux,code invalid or missing\n"); + goto err_fwnode_put; + } + + error = fwnode_property_read_u32_array(child, "abs-range", + axes[i].range, 2); + if (error) { + dev_err(dev, "abs-range invalid or missing\n"); + goto err_fwnode_put; + } + + fwnode_property_read_u32(child, "abs-fuzz", &axes[i].fuzz); + fwnode_property_read_u32(child, "abs-flat", &axes[i].flat); + + input_set_abs_params(joy->input, axes[i].code, + axes[i].range[0], axes[i].range[1], + axes[i].fuzz, axes[i].flat); + input_set_capability(joy->input, EV_ABS, axes[i].code); + } + + joy->axes = axes; + + return 0; + +err_fwnode_put: + fwnode_handle_put(child); + return error; +} + +static int adc_joystick_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adc_joystick *joy; + struct input_dev *input; + int error; + int bits; + int i; + unsigned int poll_interval; + + joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL); + if (!joy) + return -ENOMEM; + + joy->chans = devm_iio_channel_get_all(dev); + if (IS_ERR(joy->chans)) { + error = PTR_ERR(joy->chans); + if (error != -EPROBE_DEFER) + dev_err(dev, "Unable to get IIO channels"); + return error; + } + + error = device_property_read_u32(dev, "poll-interval", &poll_interval); + if (error) { + /* -EINVAL means the property is absent. */ + if (error != -EINVAL) + return error; + } else if (poll_interval == 0) { + dev_err(dev, "Unable to get poll-interval\n"); + return -EINVAL; + } else { + joy->polled = true; + } + + /* + * Count how many channels we got. NULL terminated. + * Do not check the storage size if using polling. + */ + for (i = 0; joy->chans[i].indio_dev; i++) { + if (joy->polled) + continue; + bits = joy->chans[i].channel->scan_type.storagebits; + if (!bits || bits > 16) { + dev_err(dev, "Unsupported channel storage size\n"); + return -EINVAL; + } + if (bits != joy->chans[0].channel->scan_type.storagebits) { + dev_err(dev, "Channels must have equal storage size\n"); + return -EINVAL; + } + } + joy->num_chans = i; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "Unable to allocate input device\n"); + return -ENOMEM; + } + + joy->input = input; + input->name = pdev->name; + input->id.bustype = BUS_HOST; + + error = adc_joystick_set_axes(dev, joy); + if (error) + return error; + + if (joy->polled) { + input_setup_polling(input, adc_joystick_poll); + input_set_poll_interval(input, poll_interval); + } else { + input->open = adc_joystick_open; + input->close = adc_joystick_close; + + joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, + joy); + if (IS_ERR(joy->buffer)) { + dev_err(dev, "Unable to allocate callback buffer\n"); + return PTR_ERR(joy->buffer); + } + + error = devm_add_action_or_reset(dev, adc_joystick_cleanup, + joy->buffer); + if (error) { + dev_err(dev, "Unable to add action\n"); + return error; + } + } + + input_set_drvdata(input, joy); + + error = input_register_device(input); + if (error) { + dev_err(dev, "Unable to register input device\n"); + return error; + } + + return 0; +} + +static const struct of_device_id adc_joystick_of_match[] = { + { .compatible = "adc-joystick", }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_joystick_of_match); + +static struct platform_driver adc_joystick_driver = { + .driver = { + .name = "adc-joystick", + .of_match_table = adc_joystick_of_match, + }, + .probe = adc_joystick_probe, +}; +module_platform_driver(adc_joystick_driver); + +MODULE_DESCRIPTION("Input driver for joysticks connected over ADC"); +MODULE_AUTHOR("Artur Rojek "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3