From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/keyboard/lm8333.c | 229 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 drivers/input/keyboard/lm8333.c (limited to 'drivers/input/keyboard/lm8333.c') diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c new file mode 100644 index 000000000..7457c3220 --- /dev/null +++ b/drivers/input/keyboard/lm8333.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LM8333 keypad driver + * Copyright (C) 2012 Wolfram Sang, Pengutronix + */ + +#include +#include +#include +#include +#include +#include +#include + +#define LM8333_FIFO_READ 0x20 +#define LM8333_DEBOUNCE 0x22 +#define LM8333_READ_INT 0xD0 +#define LM8333_ACTIVE 0xE4 +#define LM8333_READ_ERROR 0xF0 + +#define LM8333_KEYPAD_IRQ (1 << 0) +#define LM8333_ERROR_IRQ (1 << 3) + +#define LM8333_ERROR_KEYOVR 0x04 +#define LM8333_ERROR_FIFOOVR 0x40 + +#define LM8333_FIFO_TRANSFER_SIZE 16 + +#define LM8333_NUM_ROWS 8 +#define LM8333_NUM_COLS 16 +#define LM8333_ROW_SHIFT 4 + +struct lm8333 { + struct i2c_client *client; + struct input_dev *input; + unsigned short keycodes[LM8333_NUM_ROWS << LM8333_ROW_SHIFT]; +}; + +/* The accessors try twice because the first access may be needed for wakeup */ +#define LM8333_READ_RETRIES 2 + +int lm8333_read8(struct lm8333 *lm8333, u8 cmd) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_read_byte_data(lm8333->client, cmd); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_write_byte_data(lm8333->client, cmd, val); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf) +{ + int retries = 0, ret; + + do { + ret = i2c_smbus_read_i2c_block_data(lm8333->client, + cmd, len, buf); + } while (ret < 0 && retries++ < LM8333_READ_RETRIES); + + return ret; +} + +static void lm8333_key_handler(struct lm8333 *lm8333) +{ + struct input_dev *input = lm8333->input; + u8 keys[LM8333_FIFO_TRANSFER_SIZE]; + u8 code, pressed; + int i, ret; + + ret = lm8333_read_block(lm8333, LM8333_FIFO_READ, + LM8333_FIFO_TRANSFER_SIZE, keys); + if (ret != LM8333_FIFO_TRANSFER_SIZE) { + dev_err(&lm8333->client->dev, + "Error %d while reading FIFO\n", ret); + return; + } + + for (i = 0; i < LM8333_FIFO_TRANSFER_SIZE && keys[i]; i++) { + pressed = keys[i] & 0x80; + code = keys[i] & 0x7f; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, lm8333->keycodes[code], pressed); + } + + input_sync(input); +} + +static irqreturn_t lm8333_irq_thread(int irq, void *data) +{ + struct lm8333 *lm8333 = data; + u8 status = lm8333_read8(lm8333, LM8333_READ_INT); + + if (!status) + return IRQ_NONE; + + if (status & LM8333_ERROR_IRQ) { + u8 err = lm8333_read8(lm8333, LM8333_READ_ERROR); + + if (err & (LM8333_ERROR_KEYOVR | LM8333_ERROR_FIFOOVR)) { + u8 dummy[LM8333_FIFO_TRANSFER_SIZE]; + + lm8333_read_block(lm8333, LM8333_FIFO_READ, + LM8333_FIFO_TRANSFER_SIZE, dummy); + } + dev_err(&lm8333->client->dev, "Got error %02x\n", err); + } + + if (status & LM8333_KEYPAD_IRQ) + lm8333_key_handler(lm8333); + + return IRQ_HANDLED; +} + +static int lm8333_probe(struct i2c_client *client) +{ + const struct lm8333_platform_data *pdata = + dev_get_platdata(&client->dev); + struct lm8333 *lm8333; + struct input_dev *input; + int err, active_time; + + if (!pdata) + return -EINVAL; + + active_time = pdata->active_time ?: 500; + if (active_time / 3 <= pdata->debounce_time / 3) { + dev_err(&client->dev, "Active time not big enough!\n"); + return -EINVAL; + } + + lm8333 = kzalloc(sizeof(*lm8333), GFP_KERNEL); + input = input_allocate_device(); + if (!lm8333 || !input) { + err = -ENOMEM; + goto free_mem; + } + + lm8333->client = client; + lm8333->input = input; + + input->name = client->name; + input->dev.parent = &client->dev; + input->id.bustype = BUS_I2C; + + input_set_capability(input, EV_MSC, MSC_SCAN); + + err = matrix_keypad_build_keymap(pdata->matrix_data, NULL, + LM8333_NUM_ROWS, LM8333_NUM_COLS, + lm8333->keycodes, input); + if (err) + goto free_mem; + + if (pdata->debounce_time) { + err = lm8333_write8(lm8333, LM8333_DEBOUNCE, + pdata->debounce_time / 3); + if (err) + dev_warn(&client->dev, "Unable to set debounce time\n"); + } + + if (pdata->active_time) { + err = lm8333_write8(lm8333, LM8333_ACTIVE, + pdata->active_time / 3); + if (err) + dev_warn(&client->dev, "Unable to set active time\n"); + } + + err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "lm8333", lm8333); + if (err) + goto free_mem; + + err = input_register_device(input); + if (err) + goto free_irq; + + i2c_set_clientdata(client, lm8333); + return 0; + + free_irq: + free_irq(client->irq, lm8333); + free_mem: + input_free_device(input); + kfree(lm8333); + return err; +} + +static void lm8333_remove(struct i2c_client *client) +{ + struct lm8333 *lm8333 = i2c_get_clientdata(client); + + free_irq(client->irq, lm8333); + input_unregister_device(lm8333->input); + kfree(lm8333); +} + +static const struct i2c_device_id lm8333_id[] = { + { "lm8333", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm8333_id); + +static struct i2c_driver lm8333_driver = { + .driver = { + .name = "lm8333", + }, + .probe_new = lm8333_probe, + .remove = lm8333_remove, + .id_table = lm8333_id, +}; +module_i2c_driver(lm8333_driver); + +MODULE_AUTHOR("Wolfram Sang "); +MODULE_DESCRIPTION("LM8333 keyboard driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3