From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/misc/atmel_captouch.c | 278 ++++++++++++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 drivers/input/misc/atmel_captouch.c (limited to 'drivers/input/misc/atmel_captouch.c') diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c new file mode 100644 index 000000000..d9704b174 --- /dev/null +++ b/drivers/input/misc/atmel_captouch.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Atmel Atmegaxx Capacitive Touch Button Driver + * + * Copyright (C) 2016 Google, inc. + */ + +/* + * It's irrelevant that the HW used to develop captouch driver is based + * on Atmega88PA part and uses QtouchADC parts for sensing touch. + * Calling this driver "captouch" is an arbitrary way to distinguish + * the protocol this driver supported by other atmel/qtouch drivers. + * + * Captouch driver supports a newer/different version of the I2C + * registers/commands than the qt1070.c driver. + * Don't let the similarity of the general driver structure fool you. + * + * For raw i2c access from userspace, use i2cset/i2cget + * to poke at /dev/i2c-N devices. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Maximum number of buttons supported */ +#define MAX_NUM_OF_BUTTONS 8 + +/* Registers */ +#define REG_KEY1_THRESHOLD 0x02 +#define REG_KEY2_THRESHOLD 0x03 +#define REG_KEY3_THRESHOLD 0x04 +#define REG_KEY4_THRESHOLD 0x05 + +#define REG_KEY1_REF_H 0x20 +#define REG_KEY1_REF_L 0x21 +#define REG_KEY2_REF_H 0x22 +#define REG_KEY2_REF_L 0x23 +#define REG_KEY3_REF_H 0x24 +#define REG_KEY3_REF_L 0x25 +#define REG_KEY4_REF_H 0x26 +#define REG_KEY4_REF_L 0x27 + +#define REG_KEY1_DLT_H 0x30 +#define REG_KEY1_DLT_L 0x31 +#define REG_KEY2_DLT_H 0x32 +#define REG_KEY2_DLT_L 0x33 +#define REG_KEY3_DLT_H 0x34 +#define REG_KEY3_DLT_L 0x35 +#define REG_KEY4_DLT_H 0x36 +#define REG_KEY4_DLT_L 0x37 + +#define REG_KEY_STATE 0x3C + +/* + * @i2c_client: I2C slave device client pointer + * @input: Input device pointer + * @num_btn: Number of buttons + * @keycodes: map of button# to KeyCode + * @prev_btn: Previous key state to detect button "press" or "release" + * @xfer_buf: I2C transfer buffer + */ +struct atmel_captouch_device { + struct i2c_client *client; + struct input_dev *input; + u32 num_btn; + u32 keycodes[MAX_NUM_OF_BUTTONS]; + u8 prev_btn; + u8 xfer_buf[8] ____cacheline_aligned; +}; + +/* + * Read from I2C slave device + * The protocol is that the client has to provide both the register address + * and the length, and while reading back the device would prepend the data + * with address and length for verification. + */ +static int atmel_read(struct atmel_captouch_device *capdev, + u8 reg, u8 *data, size_t len) +{ + struct i2c_client *client = capdev->client; + struct device *dev = &client->dev; + struct i2c_msg msg[2]; + int err; + + if (len > sizeof(capdev->xfer_buf) - 2) + return -EINVAL; + + capdev->xfer_buf[0] = reg; + capdev->xfer_buf[1] = len; + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].buf = capdev->xfer_buf; + msg[0].len = 2; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = capdev->xfer_buf; + msg[1].len = len + 2; + + err = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (err != ARRAY_SIZE(msg)) + return err < 0 ? err : -EIO; + + if (capdev->xfer_buf[0] != reg) { + dev_err(dev, + "I2C read error: register address does not match (%#02x vs %02x)\n", + capdev->xfer_buf[0], reg); + return -ECOMM; + } + + memcpy(data, &capdev->xfer_buf[2], len); + + return 0; +} + +/* + * Handle interrupt and report the key changes to the input system. + * Multi-touch can be supported; however, it really depends on whether + * the device can multi-touch. + */ +static irqreturn_t atmel_captouch_isr(int irq, void *data) +{ + struct atmel_captouch_device *capdev = data; + struct device *dev = &capdev->client->dev; + int error; + int i; + u8 new_btn; + u8 changed_btn; + + error = atmel_read(capdev, REG_KEY_STATE, &new_btn, 1); + if (error) { + dev_err(dev, "failed to read button state: %d\n", error); + goto out; + } + + dev_dbg(dev, "%s: button state %#02x\n", __func__, new_btn); + + changed_btn = new_btn ^ capdev->prev_btn; + capdev->prev_btn = new_btn; + + for (i = 0; i < capdev->num_btn; i++) { + if (changed_btn & BIT(i)) + input_report_key(capdev->input, + capdev->keycodes[i], + new_btn & BIT(i)); + } + + input_sync(capdev->input); + +out: + return IRQ_HANDLED; +} + +/* + * Probe function to setup the device, input system and interrupt + */ +static int atmel_captouch_probe(struct i2c_client *client) +{ + struct atmel_captouch_device *capdev; + struct device *dev = &client->dev; + struct device_node *node; + int i; + int err; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + dev_err(dev, "needed i2c functionality is not supported\n"); + return -EINVAL; + } + + capdev = devm_kzalloc(dev, sizeof(*capdev), GFP_KERNEL); + if (!capdev) + return -ENOMEM; + + capdev->client = client; + + err = atmel_read(capdev, REG_KEY_STATE, + &capdev->prev_btn, sizeof(capdev->prev_btn)); + if (err) { + dev_err(dev, "failed to read initial button state: %d\n", err); + return err; + } + + capdev->input = devm_input_allocate_device(dev); + if (!capdev->input) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + capdev->input->id.bustype = BUS_I2C; + capdev->input->id.product = 0x880A; + capdev->input->id.version = 0; + capdev->input->name = "ATMegaXX Capacitive Button Controller"; + __set_bit(EV_KEY, capdev->input->evbit); + + node = dev->of_node; + if (!node) { + dev_err(dev, "failed to find matching node in device tree\n"); + return -EINVAL; + } + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, capdev->input->evbit); + + capdev->num_btn = of_property_count_u32_elems(node, "linux,keymap"); + if (capdev->num_btn > MAX_NUM_OF_BUTTONS) + capdev->num_btn = MAX_NUM_OF_BUTTONS; + + err = of_property_read_u32_array(node, "linux,keycodes", + capdev->keycodes, + capdev->num_btn); + if (err) { + dev_err(dev, + "failed to read linux,keycode property: %d\n", err); + return err; + } + + for (i = 0; i < capdev->num_btn; i++) + __set_bit(capdev->keycodes[i], capdev->input->keybit); + + capdev->input->keycode = capdev->keycodes; + capdev->input->keycodesize = sizeof(capdev->keycodes[0]); + capdev->input->keycodemax = capdev->num_btn; + + err = input_register_device(capdev->input); + if (err) + return err; + + err = devm_request_threaded_irq(dev, client->irq, + NULL, atmel_captouch_isr, + IRQF_ONESHOT, + "atmel_captouch", capdev); + if (err) { + dev_err(dev, "failed to request irq %d: %d\n", + client->irq, err); + return err; + } + + return 0; +} + +static const struct of_device_id atmel_captouch_of_id[] = { + { + .compatible = "atmel,captouch", + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, atmel_captouch_of_id); + +static const struct i2c_device_id atmel_captouch_id[] = { + { "atmel_captouch", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, atmel_captouch_id); + +static struct i2c_driver atmel_captouch_driver = { + .probe_new = atmel_captouch_probe, + .id_table = atmel_captouch_id, + .driver = { + .name = "atmel_captouch", + .of_match_table = atmel_captouch_of_id, + }, +}; +module_i2c_driver(atmel_captouch_driver); + +/* Module information */ +MODULE_AUTHOR("Hung-yu Wu "); +MODULE_DESCRIPTION("Atmel ATmegaXX Capacitance Touch Sensor I2C Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3