From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/misc/hp_sdc_rtc.c | 377 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 377 insertions(+) create mode 100644 drivers/input/misc/hp_sdc_rtc.c (limited to 'drivers/input/misc/hp_sdc_rtc.c') diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c new file mode 100644 index 000000000..199bc17dd --- /dev/null +++ b/drivers/input/misc/hp_sdc_rtc.c @@ -0,0 +1,377 @@ +/* + * HP i8042 SDC + MSM-58321 BBRTC driver. + * + * Copyright (c) 2001 Brian S. Julin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL"). + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * + * References: + * System Device Controller Microprocessor Firmware Theory of Operation + * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2 + * efirtc.c by Stephane Eranian/Hewlett Packard + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Brian S. Julin "); +MODULE_DESCRIPTION("HP i8042 SDC + MSM-58321 RTC Driver"); +MODULE_LICENSE("Dual BSD/GPL"); + +#define RTC_VERSION "1.10d" + +static unsigned long epoch = 2000; + +static struct semaphore i8042tregs; + +static void hp_sdc_rtc_isr (int irq, void *dev_id, + uint8_t status, uint8_t data) +{ + return; +} + +static int hp_sdc_rtc_do_read_bbrtc (struct rtc_time *rtctm) +{ + struct semaphore tsem; + hp_sdc_transaction t; + uint8_t tseq[91]; + int i; + + i = 0; + while (i < 91) { + tseq[i++] = HP_SDC_ACT_DATAREG | + HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN; + tseq[i++] = 0x01; /* write i8042[0x70] */ + tseq[i] = i / 7; /* BBRTC reg address */ + i++; + tseq[i++] = HP_SDC_CMD_DO_RTCR; /* Trigger command */ + tseq[i++] = 2; /* expect 1 stat/dat pair back. */ + i++; i++; /* buffer for stat/dat pair */ + } + tseq[84] |= HP_SDC_ACT_SEMAPHORE; + t.endidx = 91; + t.seq = tseq; + t.act.semaphore = &tsem; + sema_init(&tsem, 0); + + if (hp_sdc_enqueue_transaction(&t)) return -1; + + /* Put ourselves to sleep for results. */ + if (WARN_ON(down_interruptible(&tsem))) + return -1; + + /* Check for nonpresence of BBRTC */ + if (!((tseq[83] | tseq[90] | tseq[69] | tseq[76] | + tseq[55] | tseq[62] | tseq[34] | tseq[41] | + tseq[20] | tseq[27] | tseq[6] | tseq[13]) & 0x0f)) + return -1; + + memset(rtctm, 0, sizeof(struct rtc_time)); + rtctm->tm_year = (tseq[83] & 0x0f) + (tseq[90] & 0x0f) * 10; + rtctm->tm_mon = (tseq[69] & 0x0f) + (tseq[76] & 0x0f) * 10; + rtctm->tm_mday = (tseq[55] & 0x0f) + (tseq[62] & 0x0f) * 10; + rtctm->tm_wday = (tseq[48] & 0x0f); + rtctm->tm_hour = (tseq[34] & 0x0f) + (tseq[41] & 0x0f) * 10; + rtctm->tm_min = (tseq[20] & 0x0f) + (tseq[27] & 0x0f) * 10; + rtctm->tm_sec = (tseq[6] & 0x0f) + (tseq[13] & 0x0f) * 10; + + return 0; +} + +static int hp_sdc_rtc_read_bbrtc (struct rtc_time *rtctm) +{ + struct rtc_time tm, tm_last; + int i = 0; + + /* MSM-58321 has no read latch, so must read twice and compare. */ + + if (hp_sdc_rtc_do_read_bbrtc(&tm_last)) return -1; + if (hp_sdc_rtc_do_read_bbrtc(&tm)) return -1; + + while (memcmp(&tm, &tm_last, sizeof(struct rtc_time))) { + if (i++ > 4) return -1; + memcpy(&tm_last, &tm, sizeof(struct rtc_time)); + if (hp_sdc_rtc_do_read_bbrtc(&tm)) return -1; + } + + memcpy(rtctm, &tm, sizeof(struct rtc_time)); + + return 0; +} + + +static int64_t hp_sdc_rtc_read_i8042timer (uint8_t loadcmd, int numreg) +{ + hp_sdc_transaction t; + uint8_t tseq[26] = { + HP_SDC_ACT_PRECMD | HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, + 0, + HP_SDC_CMD_READ_T1, 2, 0, 0, + HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, + HP_SDC_CMD_READ_T2, 2, 0, 0, + HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, + HP_SDC_CMD_READ_T3, 2, 0, 0, + HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, + HP_SDC_CMD_READ_T4, 2, 0, 0, + HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN, + HP_SDC_CMD_READ_T5, 2, 0, 0 + }; + + t.endidx = numreg * 5; + + tseq[1] = loadcmd; + tseq[t.endidx - 4] |= HP_SDC_ACT_SEMAPHORE; /* numreg assumed > 1 */ + + t.seq = tseq; + t.act.semaphore = &i8042tregs; + + /* Sleep if output regs in use. */ + if (WARN_ON(down_interruptible(&i8042tregs))) + return -1; + + if (hp_sdc_enqueue_transaction(&t)) { + up(&i8042tregs); + return -1; + } + + /* Sleep until results come back. */ + if (WARN_ON(down_interruptible(&i8042tregs))) + return -1; + + up(&i8042tregs); + + return (tseq[5] | + ((uint64_t)(tseq[10]) << 8) | ((uint64_t)(tseq[15]) << 16) | + ((uint64_t)(tseq[20]) << 24) | ((uint64_t)(tseq[25]) << 32)); +} + + +/* Read the i8042 real-time clock */ +static inline int hp_sdc_rtc_read_rt(struct timespec64 *res) { + int64_t raw; + uint32_t tenms; + unsigned int days; + + raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_RT, 5); + if (raw < 0) return -1; + + tenms = (uint32_t)raw & 0xffffff; + days = (unsigned int)(raw >> 24) & 0xffff; + + res->tv_nsec = (long)(tenms % 100) * 10000 * 1000; + res->tv_sec = (tenms / 100) + (time64_t)days * 86400; + + return 0; +} + + +/* Read the i8042 fast handshake timer */ +static inline int hp_sdc_rtc_read_fhs(struct timespec64 *res) { + int64_t raw; + unsigned int tenms; + + raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_FHS, 2); + if (raw < 0) return -1; + + tenms = (unsigned int)raw & 0xffff; + + res->tv_nsec = (long)(tenms % 100) * 10000 * 1000; + res->tv_sec = (time64_t)(tenms / 100); + + return 0; +} + + +/* Read the i8042 match timer (a.k.a. alarm) */ +static inline int hp_sdc_rtc_read_mt(struct timespec64 *res) { + int64_t raw; + uint32_t tenms; + + raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_MT, 3); + if (raw < 0) return -1; + + tenms = (uint32_t)raw & 0xffffff; + + res->tv_nsec = (long)(tenms % 100) * 10000 * 1000; + res->tv_sec = (time64_t)(tenms / 100); + + return 0; +} + + +/* Read the i8042 delay timer */ +static inline int hp_sdc_rtc_read_dt(struct timespec64 *res) { + int64_t raw; + uint32_t tenms; + + raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_DT, 3); + if (raw < 0) return -1; + + tenms = (uint32_t)raw & 0xffffff; + + res->tv_nsec = (long)(tenms % 100) * 10000 * 1000; + res->tv_sec = (time64_t)(tenms / 100); + + return 0; +} + + +/* Read the i8042 cycle timer (a.k.a. periodic) */ +static inline int hp_sdc_rtc_read_ct(struct timespec64 *res) { + int64_t raw; + uint32_t tenms; + + raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_CT, 3); + if (raw < 0) return -1; + + tenms = (uint32_t)raw & 0xffffff; + + res->tv_nsec = (long)(tenms % 100) * 10000 * 1000; + res->tv_sec = (time64_t)(tenms / 100); + + return 0; +} + +static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v) +{ +#define YN(bit) ("no") +#define NY(bit) ("yes") + struct rtc_time tm; + struct timespec64 tv; + + memset(&tm, 0, sizeof(struct rtc_time)); + + if (hp_sdc_rtc_read_bbrtc(&tm)) { + seq_puts(m, "BBRTC\t\t: READ FAILED!\n"); + } else { + seq_printf(m, + "rtc_time\t: %ptRt\n" + "rtc_date\t: %ptRd\n" + "rtc_epoch\t: %04lu\n", + &tm, &tm, epoch); + } + + if (hp_sdc_rtc_read_rt(&tv)) { + seq_puts(m, "i8042 rtc\t: READ FAILED!\n"); + } else { + seq_printf(m, "i8042 rtc\t: %lld.%02ld seconds\n", + (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L); + } + + if (hp_sdc_rtc_read_fhs(&tv)) { + seq_puts(m, "handshake\t: READ FAILED!\n"); + } else { + seq_printf(m, "handshake\t: %lld.%02ld seconds\n", + (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L); + } + + if (hp_sdc_rtc_read_mt(&tv)) { + seq_puts(m, "alarm\t\t: READ FAILED!\n"); + } else { + seq_printf(m, "alarm\t\t: %lld.%02ld seconds\n", + (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L); + } + + if (hp_sdc_rtc_read_dt(&tv)) { + seq_puts(m, "delay\t\t: READ FAILED!\n"); + } else { + seq_printf(m, "delay\t\t: %lld.%02ld seconds\n", + (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L); + } + + if (hp_sdc_rtc_read_ct(&tv)) { + seq_puts(m, "periodic\t: READ FAILED!\n"); + } else { + seq_printf(m, "periodic\t: %lld.%02ld seconds\n", + (s64)tv.tv_sec, (long)tv.tv_nsec/1000000L); + } + + seq_printf(m, + "DST_enable\t: %s\n" + "BCD\t\t: %s\n" + "24hr\t\t: %s\n" + "square_wave\t: %s\n" + "alarm_IRQ\t: %s\n" + "update_IRQ\t: %s\n" + "periodic_IRQ\t: %s\n" + "periodic_freq\t: %ld\n" + "batt_status\t: %s\n", + YN(RTC_DST_EN), + NY(RTC_DM_BINARY), + YN(RTC_24H), + YN(RTC_SQWE), + YN(RTC_AIE), + YN(RTC_UIE), + YN(RTC_PIE), + 1UL, + 1 ? "okay" : "dead"); + + return 0; +#undef YN +#undef NY +} + +static int __init hp_sdc_rtc_init(void) +{ + int ret; + +#ifdef __mc68000__ + if (!MACH_IS_HP300) + return -ENODEV; +#endif + + sema_init(&i8042tregs, 1); + + if ((ret = hp_sdc_request_timer_irq(&hp_sdc_rtc_isr))) + return ret; + + proc_create_single("driver/rtc", 0, NULL, hp_sdc_rtc_proc_show); + + printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support loaded " + "(RTC v " RTC_VERSION ")\n"); + + return 0; +} + +static void __exit hp_sdc_rtc_exit(void) +{ + remove_proc_entry ("driver/rtc", NULL); + hp_sdc_release_timer_irq(hp_sdc_rtc_isr); + printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support unloaded\n"); +} + +module_init(hp_sdc_rtc_init); +module_exit(hp_sdc_rtc_exit); -- cgit v1.2.3