From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/misc/ibm-panel.c | 199 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 199 insertions(+) create mode 100644 drivers/input/misc/ibm-panel.c (limited to 'drivers/input/misc/ibm-panel.c') diff --git a/drivers/input/misc/ibm-panel.c b/drivers/input/misc/ibm-panel.c new file mode 100644 index 000000000..3969ffc1b --- /dev/null +++ b/drivers/input/misc/ibm-panel.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) IBM Corporation 2020 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEVICE_NAME "ibm-panel" +#define PANEL_KEYCODES_COUNT 3 + +struct ibm_panel { + u8 idx; + u8 command[11]; + u32 keycodes[PANEL_KEYCODES_COUNT]; + spinlock_t lock; /* protects writes to idx and command */ + struct input_dev *input; +}; + +static u8 ibm_panel_calculate_checksum(struct ibm_panel *panel) +{ + u8 chksum; + u16 sum = 0; + unsigned int i; + + for (i = 0; i < sizeof(panel->command) - 1; ++i) { + sum += panel->command[i]; + if (sum & 0xff00) { + sum &= 0xff; + sum++; + } + } + + chksum = sum & 0xff; + chksum = ~chksum; + chksum++; + + return chksum; +} + +static void ibm_panel_process_command(struct ibm_panel *panel) +{ + u8 button; + u8 chksum; + + if (panel->command[0] != 0xff && panel->command[1] != 0xf0) { + dev_dbg(&panel->input->dev, "command invalid: %02x %02x\n", + panel->command[0], panel->command[1]); + return; + } + + chksum = ibm_panel_calculate_checksum(panel); + if (chksum != panel->command[sizeof(panel->command) - 1]) { + dev_dbg(&panel->input->dev, + "command failed checksum: %u != %u\n", chksum, + panel->command[sizeof(panel->command) - 1]); + return; + } + + button = panel->command[2] & 0xf; + if (button < PANEL_KEYCODES_COUNT) { + input_report_key(panel->input, panel->keycodes[button], + !(panel->command[2] & 0x80)); + input_sync(panel->input); + } else { + dev_dbg(&panel->input->dev, "unknown button %u\n", + button); + } +} + +static int ibm_panel_i2c_slave_cb(struct i2c_client *client, + enum i2c_slave_event event, u8 *val) +{ + unsigned long flags; + struct ibm_panel *panel = i2c_get_clientdata(client); + + dev_dbg(&panel->input->dev, "event: %u data: %02x\n", event, *val); + + spin_lock_irqsave(&panel->lock, flags); + + switch (event) { + case I2C_SLAVE_STOP: + if (panel->idx == sizeof(panel->command)) + ibm_panel_process_command(panel); + else + dev_dbg(&panel->input->dev, + "command incorrect size %u\n", panel->idx); + fallthrough; + case I2C_SLAVE_WRITE_REQUESTED: + panel->idx = 0; + break; + case I2C_SLAVE_WRITE_RECEIVED: + if (panel->idx < sizeof(panel->command)) + panel->command[panel->idx++] = *val; + else + /* + * The command is too long and therefore invalid, so set the index + * to it's largest possible value. When a STOP is finally received, + * the command will be rejected upon processing. + */ + panel->idx = U8_MAX; + break; + case I2C_SLAVE_READ_REQUESTED: + case I2C_SLAVE_READ_PROCESSED: + *val = 0xff; + break; + default: + break; + } + + spin_unlock_irqrestore(&panel->lock, flags); + + return 0; +} + +static int ibm_panel_probe(struct i2c_client *client) +{ + struct ibm_panel *panel; + int i; + int error; + + panel = devm_kzalloc(&client->dev, sizeof(*panel), GFP_KERNEL); + if (!panel) + return -ENOMEM; + + spin_lock_init(&panel->lock); + + panel->input = devm_input_allocate_device(&client->dev); + if (!panel->input) + return -ENOMEM; + + panel->input->name = client->name; + panel->input->id.bustype = BUS_I2C; + + error = device_property_read_u32_array(&client->dev, + "linux,keycodes", + panel->keycodes, + PANEL_KEYCODES_COUNT); + if (error) { + /* + * Use gamepad buttons as defaults for compatibility with + * existing applications. + */ + panel->keycodes[0] = BTN_NORTH; + panel->keycodes[1] = BTN_SOUTH; + panel->keycodes[2] = BTN_SELECT; + } + + for (i = 0; i < PANEL_KEYCODES_COUNT; ++i) + input_set_capability(panel->input, EV_KEY, panel->keycodes[i]); + + error = input_register_device(panel->input); + if (error) { + dev_err(&client->dev, + "Failed to register input device: %d\n", error); + return error; + } + + i2c_set_clientdata(client, panel); + error = i2c_slave_register(client, ibm_panel_i2c_slave_cb); + if (error) { + dev_err(&client->dev, + "Failed to register as i2c slave: %d\n", error); + return error; + } + + return 0; +} + +static void ibm_panel_remove(struct i2c_client *client) +{ + i2c_slave_unregister(client); +} + +static const struct of_device_id ibm_panel_match[] = { + { .compatible = "ibm,op-panel" }, + { } +}; +MODULE_DEVICE_TABLE(of, ibm_panel_match); + +static struct i2c_driver ibm_panel_driver = { + .driver = { + .name = DEVICE_NAME, + .of_match_table = ibm_panel_match, + }, + .probe_new = ibm_panel_probe, + .remove = ibm_panel_remove, +}; +module_i2c_driver(ibm_panel_driver); + +MODULE_AUTHOR("Eddie James "); +MODULE_DESCRIPTION("IBM Operation Panel Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3