From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/mouse/cypress_ps2.c | 707 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 707 insertions(+) create mode 100644 drivers/input/mouse/cypress_ps2.c (limited to 'drivers/input/mouse/cypress_ps2.c') diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c new file mode 100644 index 000000000..d272f1ec2 --- /dev/null +++ b/drivers/input/mouse/cypress_ps2.c @@ -0,0 +1,707 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Cypress Trackpad PS/2 mouse driver + * + * Copyright (c) 2012 Cypress Semiconductor Corporation. + * + * Author: + * Dudley Du + * + * Additional contributors include: + * Kamal Mostafa + * Kyle Fazzari + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cypress_ps2.h" + +#undef CYTP_DEBUG_VERBOSE /* define this and DEBUG for more verbose dump */ + +static void cypress_set_packet_size(struct psmouse *psmouse, unsigned int n) +{ + struct cytp_data *cytp = psmouse->private; + cytp->pkt_size = n; +} + +static const unsigned char cytp_rate[] = {10, 20, 40, 60, 100, 200}; +static const unsigned char cytp_resolution[] = {0x00, 0x01, 0x02, 0x03}; + +static int cypress_ps2_sendbyte(struct psmouse *psmouse, int value) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + if (ps2_sendbyte(ps2dev, value & 0xff, CYTP_CMD_TIMEOUT) < 0) { + psmouse_dbg(psmouse, + "sending command 0x%02x failed, resp 0x%02x\n", + value & 0xff, ps2dev->nak); + if (ps2dev->nak == CYTP_PS2_RETRY) + return CYTP_PS2_RETRY; + else + return CYTP_PS2_ERROR; + } + +#ifdef CYTP_DEBUG_VERBOSE + psmouse_dbg(psmouse, "sending command 0x%02x succeeded, resp 0xfa\n", + value & 0xff); +#endif + + return 0; +} + +static int cypress_ps2_ext_cmd(struct psmouse *psmouse, unsigned short cmd, + unsigned char data) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int tries = CYTP_PS2_CMD_TRIES; + int rc; + + ps2_begin_command(ps2dev); + + do { + /* + * Send extension command byte (0xE8 or 0xF3). + * If sending the command fails, send recovery command + * to make the device return to the ready state. + */ + rc = cypress_ps2_sendbyte(psmouse, cmd & 0xff); + if (rc == CYTP_PS2_RETRY) { + rc = cypress_ps2_sendbyte(psmouse, 0x00); + if (rc == CYTP_PS2_RETRY) + rc = cypress_ps2_sendbyte(psmouse, 0x0a); + } + if (rc == CYTP_PS2_ERROR) + continue; + + rc = cypress_ps2_sendbyte(psmouse, data); + if (rc == CYTP_PS2_RETRY) + rc = cypress_ps2_sendbyte(psmouse, data); + if (rc == CYTP_PS2_ERROR) + continue; + else + break; + } while (--tries > 0); + + ps2_end_command(ps2dev); + + return rc; +} + +static int cypress_ps2_read_cmd_status(struct psmouse *psmouse, + unsigned char cmd, + unsigned char *param) +{ + int rc; + struct ps2dev *ps2dev = &psmouse->ps2dev; + enum psmouse_state old_state; + int pktsize; + + ps2_begin_command(ps2dev); + + old_state = psmouse->state; + psmouse->state = PSMOUSE_CMD_MODE; + psmouse->pktcnt = 0; + + pktsize = (cmd == CYTP_CMD_READ_TP_METRICS) ? 8 : 3; + memset(param, 0, pktsize); + + rc = cypress_ps2_sendbyte(psmouse, 0xe9); + if (rc < 0) + goto out; + + wait_event_timeout(ps2dev->wait, + (psmouse->pktcnt >= pktsize), + msecs_to_jiffies(CYTP_CMD_TIMEOUT)); + + memcpy(param, psmouse->packet, pktsize); + + psmouse_dbg(psmouse, "Command 0x%02x response data (0x): %*ph\n", + cmd, pktsize, param); + +out: + psmouse->state = old_state; + psmouse->pktcnt = 0; + + ps2_end_command(ps2dev); + + return rc; +} + +static bool cypress_verify_cmd_state(struct psmouse *psmouse, + unsigned char cmd, unsigned char *param) +{ + bool rate_match = false; + bool resolution_match = false; + int i; + + /* callers will do further checking. */ + if (cmd == CYTP_CMD_READ_CYPRESS_ID || + cmd == CYTP_CMD_STANDARD_MODE || + cmd == CYTP_CMD_READ_TP_METRICS) + return true; + + if ((~param[0] & DFLT_RESP_BITS_VALID) == DFLT_RESP_BITS_VALID && + (param[0] & DFLT_RESP_BIT_MODE) == DFLT_RESP_STREAM_MODE) { + for (i = 0; i < sizeof(cytp_resolution); i++) + if (cytp_resolution[i] == param[1]) + resolution_match = true; + + for (i = 0; i < sizeof(cytp_rate); i++) + if (cytp_rate[i] == param[2]) + rate_match = true; + + if (resolution_match && rate_match) + return true; + } + + psmouse_dbg(psmouse, "verify cmd state failed.\n"); + return false; +} + +static int cypress_send_ext_cmd(struct psmouse *psmouse, unsigned char cmd, + unsigned char *param) +{ + int tries = CYTP_PS2_CMD_TRIES; + int rc; + + psmouse_dbg(psmouse, "send extension cmd 0x%02x, [%d %d %d %d]\n", + cmd, DECODE_CMD_AA(cmd), DECODE_CMD_BB(cmd), + DECODE_CMD_CC(cmd), DECODE_CMD_DD(cmd)); + + do { + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_DD(cmd)); + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_CC(cmd)); + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_BB(cmd)); + cypress_ps2_ext_cmd(psmouse, + PSMOUSE_CMD_SETRES, DECODE_CMD_AA(cmd)); + + rc = cypress_ps2_read_cmd_status(psmouse, cmd, param); + if (rc) + continue; + + if (cypress_verify_cmd_state(psmouse, cmd, param)) + return 0; + + } while (--tries > 0); + + return -EIO; +} + +int cypress_detect(struct psmouse *psmouse, bool set_properties) +{ + unsigned char param[3]; + + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param)) + return -ENODEV; + + /* Check for Cypress Trackpad signature bytes: 0x33 0xCC */ + if (param[0] != 0x33 || param[1] != 0xCC) + return -ENODEV; + + if (set_properties) { + psmouse->vendor = "Cypress"; + psmouse->name = "Trackpad"; + } + + return 0; +} + +static int cypress_read_fw_version(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + unsigned char param[3]; + + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_CYPRESS_ID, param)) + return -ENODEV; + + /* Check for Cypress Trackpad signature bytes: 0x33 0xCC */ + if (param[0] != 0x33 || param[1] != 0xCC) + return -ENODEV; + + cytp->fw_version = param[2] & FW_VERSION_MASX; + cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0; + + /* + * Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to + * CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594. + */ + if (cytp->fw_version >= 11) + cytp->tp_metrics_supported = 0; + + psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version); + psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n", + cytp->tp_metrics_supported); + + return 0; +} + +static int cypress_read_tp_metrics(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + unsigned char param[8]; + + /* set default values for tp metrics. */ + cytp->tp_width = CYTP_DEFAULT_WIDTH; + cytp->tp_high = CYTP_DEFAULT_HIGH; + cytp->tp_max_abs_x = CYTP_ABS_MAX_X; + cytp->tp_max_abs_y = CYTP_ABS_MAX_Y; + cytp->tp_min_pressure = CYTP_MIN_PRESSURE; + cytp->tp_max_pressure = CYTP_MAX_PRESSURE; + cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width; + cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high; + + if (!cytp->tp_metrics_supported) + return 0; + + memset(param, 0, sizeof(param)); + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) { + /* Update trackpad parameters. */ + cytp->tp_max_abs_x = (param[1] << 8) | param[0]; + cytp->tp_max_abs_y = (param[3] << 8) | param[2]; + cytp->tp_min_pressure = param[4]; + cytp->tp_max_pressure = param[5]; + } + + if (!cytp->tp_max_pressure || + cytp->tp_max_pressure < cytp->tp_min_pressure || + !cytp->tp_width || !cytp->tp_high || + !cytp->tp_max_abs_x || + cytp->tp_max_abs_x < cytp->tp_width || + !cytp->tp_max_abs_y || + cytp->tp_max_abs_y < cytp->tp_high) + return -EINVAL; + + cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width; + cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high; + +#ifdef CYTP_DEBUG_VERBOSE + psmouse_dbg(psmouse, "Dump trackpad hardware configuration as below:\n"); + psmouse_dbg(psmouse, "cytp->tp_width = %d\n", cytp->tp_width); + psmouse_dbg(psmouse, "cytp->tp_high = %d\n", cytp->tp_high); + psmouse_dbg(psmouse, "cytp->tp_max_abs_x = %d\n", cytp->tp_max_abs_x); + psmouse_dbg(psmouse, "cytp->tp_max_abs_y = %d\n", cytp->tp_max_abs_y); + psmouse_dbg(psmouse, "cytp->tp_min_pressure = %d\n", cytp->tp_min_pressure); + psmouse_dbg(psmouse, "cytp->tp_max_pressure = %d\n", cytp->tp_max_pressure); + psmouse_dbg(psmouse, "cytp->tp_res_x = %d\n", cytp->tp_res_x); + psmouse_dbg(psmouse, "cytp->tp_res_y = %d\n", cytp->tp_res_y); + + psmouse_dbg(psmouse, "tp_type_APA = %d\n", + (param[6] & TP_METRICS_BIT_APA) ? 1 : 0); + psmouse_dbg(psmouse, "tp_type_MTG = %d\n", + (param[6] & TP_METRICS_BIT_MTG) ? 1 : 0); + psmouse_dbg(psmouse, "tp_palm = %d\n", + (param[6] & TP_METRICS_BIT_PALM) ? 1 : 0); + psmouse_dbg(psmouse, "tp_stubborn = %d\n", + (param[6] & TP_METRICS_BIT_STUBBORN) ? 1 : 0); + psmouse_dbg(psmouse, "tp_1f_jitter = %d\n", + (param[6] & TP_METRICS_BIT_1F_JITTER) >> 2); + psmouse_dbg(psmouse, "tp_2f_jitter = %d\n", + (param[6] & TP_METRICS_BIT_2F_JITTER) >> 4); + psmouse_dbg(psmouse, "tp_1f_spike = %d\n", + param[7] & TP_METRICS_BIT_1F_SPIKE); + psmouse_dbg(psmouse, "tp_2f_spike = %d\n", + (param[7] & TP_METRICS_BIT_2F_SPIKE) >> 2); + psmouse_dbg(psmouse, "tp_abs_packet_format_set = %d\n", + (param[7] & TP_METRICS_BIT_ABS_PKT_FORMAT_SET) >> 4); +#endif + + return 0; +} + +static int cypress_query_hardware(struct psmouse *psmouse) +{ + int ret; + + ret = cypress_read_fw_version(psmouse); + if (ret) + return ret; + + ret = cypress_read_tp_metrics(psmouse); + if (ret) + return ret; + + return 0; +} + +static int cypress_set_absolute_mode(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + unsigned char param[3]; + + if (cypress_send_ext_cmd(psmouse, CYTP_CMD_ABS_WITH_PRESSURE_MODE, param) < 0) + return -1; + + cytp->mode = (cytp->mode & ~CYTP_BIT_ABS_REL_MASK) + | CYTP_BIT_ABS_PRESSURE; + cypress_set_packet_size(psmouse, 5); + + return 0; +} + +/* + * Reset trackpad device. + * This is also the default mode when trackpad powered on. + */ +static void cypress_reset(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + + cytp->mode = 0; + + psmouse_reset(psmouse); +} + +static int cypress_set_input_params(struct input_dev *input, + struct cytp_data *cytp) +{ + int ret; + + if (!cytp->tp_res_x || !cytp->tp_res_y) + return -EINVAL; + + __set_bit(EV_ABS, input->evbit); + input_set_abs_params(input, ABS_X, 0, cytp->tp_max_abs_x, 0, 0); + input_set_abs_params(input, ABS_Y, 0, cytp->tp_max_abs_y, 0, 0); + input_set_abs_params(input, ABS_PRESSURE, + cytp->tp_min_pressure, cytp->tp_max_pressure, 0, 0); + input_set_abs_params(input, ABS_TOOL_WIDTH, 0, 255, 0, 0); + + /* finger position */ + input_set_abs_params(input, ABS_MT_POSITION_X, 0, cytp->tp_max_abs_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cytp->tp_max_abs_y, 0, 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 255, 0, 0); + + ret = input_mt_init_slots(input, CYTP_MAX_MT_SLOTS, + INPUT_MT_DROP_UNUSED|INPUT_MT_TRACK); + if (ret < 0) + return ret; + + __set_bit(INPUT_PROP_SEMI_MT, input->propbit); + + input_abs_set_res(input, ABS_X, cytp->tp_res_x); + input_abs_set_res(input, ABS_Y, cytp->tp_res_y); + + input_abs_set_res(input, ABS_MT_POSITION_X, cytp->tp_res_x); + input_abs_set_res(input, ABS_MT_POSITION_Y, cytp->tp_res_y); + + __set_bit(BTN_TOUCH, input->keybit); + __set_bit(BTN_TOOL_FINGER, input->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input->keybit); + __set_bit(BTN_TOOL_QUADTAP, input->keybit); + __set_bit(BTN_TOOL_QUINTTAP, input->keybit); + + __clear_bit(EV_REL, input->evbit); + __clear_bit(REL_X, input->relbit); + __clear_bit(REL_Y, input->relbit); + + __set_bit(EV_KEY, input->evbit); + __set_bit(BTN_LEFT, input->keybit); + __set_bit(BTN_RIGHT, input->keybit); + __set_bit(BTN_MIDDLE, input->keybit); + + return 0; +} + +static int cypress_get_finger_count(unsigned char header_byte) +{ + unsigned char bits6_7; + int finger_count; + + bits6_7 = header_byte >> 6; + finger_count = bits6_7 & 0x03; + + if (finger_count == 1) + return 1; + + if (header_byte & ABS_HSCROLL_BIT) { + /* HSCROLL gets added on to 0 finger count. */ + switch (finger_count) { + case 0: return 4; + case 2: return 5; + default: + /* Invalid contact (e.g. palm). Ignore it. */ + return 0; + } + } + + return finger_count; +} + + +static int cypress_parse_packet(struct psmouse *psmouse, + struct cytp_data *cytp, struct cytp_report_data *report_data) +{ + unsigned char *packet = psmouse->packet; + unsigned char header_byte = packet[0]; + + memset(report_data, 0, sizeof(struct cytp_report_data)); + + report_data->contact_cnt = cypress_get_finger_count(header_byte); + report_data->tap = (header_byte & ABS_MULTIFINGER_TAP) ? 1 : 0; + + if (report_data->contact_cnt == 1) { + report_data->contacts[0].x = + ((packet[1] & 0x70) << 4) | packet[2]; + report_data->contacts[0].y = + ((packet[1] & 0x07) << 8) | packet[3]; + if (cytp->mode & CYTP_BIT_ABS_PRESSURE) + report_data->contacts[0].z = packet[4]; + + } else if (report_data->contact_cnt >= 2) { + report_data->contacts[0].x = + ((packet[1] & 0x70) << 4) | packet[2]; + report_data->contacts[0].y = + ((packet[1] & 0x07) << 8) | packet[3]; + if (cytp->mode & CYTP_BIT_ABS_PRESSURE) + report_data->contacts[0].z = packet[4]; + + report_data->contacts[1].x = + ((packet[5] & 0xf0) << 4) | packet[6]; + report_data->contacts[1].y = + ((packet[5] & 0x0f) << 8) | packet[7]; + if (cytp->mode & CYTP_BIT_ABS_PRESSURE) + report_data->contacts[1].z = report_data->contacts[0].z; + } + + report_data->left = (header_byte & BTN_LEFT_BIT) ? 1 : 0; + report_data->right = (header_byte & BTN_RIGHT_BIT) ? 1 : 0; + + /* + * This is only true if one of the mouse buttons were tapped. Make + * sure it doesn't turn into a click. The regular tap-to-click + * functionality will handle that on its own. If we don't do this, + * disabling tap-to-click won't affect the mouse button zones. + */ + if (report_data->tap) + report_data->left = 0; + +#ifdef CYTP_DEBUG_VERBOSE + { + int i; + int n = report_data->contact_cnt; + psmouse_dbg(psmouse, "Dump parsed report data as below:\n"); + psmouse_dbg(psmouse, "contact_cnt = %d\n", + report_data->contact_cnt); + if (n > CYTP_MAX_MT_SLOTS) + n = CYTP_MAX_MT_SLOTS; + for (i = 0; i < n; i++) + psmouse_dbg(psmouse, "contacts[%d] = {%d, %d, %d}\n", i, + report_data->contacts[i].x, + report_data->contacts[i].y, + report_data->contacts[i].z); + psmouse_dbg(psmouse, "left = %d\n", report_data->left); + psmouse_dbg(psmouse, "right = %d\n", report_data->right); + psmouse_dbg(psmouse, "middle = %d\n", report_data->middle); + } +#endif + + return 0; +} + +static void cypress_process_packet(struct psmouse *psmouse, bool zero_pkt) +{ + int i; + struct input_dev *input = psmouse->dev; + struct cytp_data *cytp = psmouse->private; + struct cytp_report_data report_data; + struct cytp_contact *contact; + struct input_mt_pos pos[CYTP_MAX_MT_SLOTS]; + int slots[CYTP_MAX_MT_SLOTS]; + int n; + + cypress_parse_packet(psmouse, cytp, &report_data); + + n = report_data.contact_cnt; + if (n > CYTP_MAX_MT_SLOTS) + n = CYTP_MAX_MT_SLOTS; + + for (i = 0; i < n; i++) { + contact = &report_data.contacts[i]; + pos[i].x = contact->x; + pos[i].y = contact->y; + } + + input_mt_assign_slots(input, slots, pos, n, 0); + + for (i = 0; i < n; i++) { + contact = &report_data.contacts[i]; + input_mt_slot(input, slots[i]); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, contact->x); + input_report_abs(input, ABS_MT_POSITION_Y, contact->y); + input_report_abs(input, ABS_MT_PRESSURE, contact->z); + } + + input_mt_sync_frame(input); + + input_mt_report_finger_count(input, report_data.contact_cnt); + + input_report_key(input, BTN_LEFT, report_data.left); + input_report_key(input, BTN_RIGHT, report_data.right); + input_report_key(input, BTN_MIDDLE, report_data.middle); + + input_sync(input); +} + +static psmouse_ret_t cypress_validate_byte(struct psmouse *psmouse) +{ + int contact_cnt; + int index = psmouse->pktcnt - 1; + unsigned char *packet = psmouse->packet; + struct cytp_data *cytp = psmouse->private; + + if (index < 0 || index > cytp->pkt_size) + return PSMOUSE_BAD_DATA; + + if (index == 0 && (packet[0] & 0xfc) == 0) { + /* call packet process for reporting finger leave. */ + cypress_process_packet(psmouse, 1); + return PSMOUSE_FULL_PACKET; + } + + /* + * Perform validation (and adjust packet size) based only on the + * first byte; allow all further bytes through. + */ + if (index != 0) + return PSMOUSE_GOOD_DATA; + + /* + * If absolute/relative mode bit has not been set yet, just pass + * the byte through. + */ + if ((cytp->mode & CYTP_BIT_ABS_REL_MASK) == 0) + return PSMOUSE_GOOD_DATA; + + if ((packet[0] & 0x08) == 0x08) + return PSMOUSE_BAD_DATA; + + contact_cnt = cypress_get_finger_count(packet[0]); + if (cytp->mode & CYTP_BIT_ABS_NO_PRESSURE) + cypress_set_packet_size(psmouse, contact_cnt == 2 ? 7 : 4); + else + cypress_set_packet_size(psmouse, contact_cnt == 2 ? 8 : 5); + + return PSMOUSE_GOOD_DATA; +} + +static psmouse_ret_t cypress_protocol_handler(struct psmouse *psmouse) +{ + struct cytp_data *cytp = psmouse->private; + + if (psmouse->pktcnt >= cytp->pkt_size) { + cypress_process_packet(psmouse, 0); + return PSMOUSE_FULL_PACKET; + } + + return cypress_validate_byte(psmouse); +} + +static void cypress_set_rate(struct psmouse *psmouse, unsigned int rate) +{ + struct cytp_data *cytp = psmouse->private; + + if (rate >= 80) { + psmouse->rate = 80; + cytp->mode |= CYTP_BIT_HIGH_RATE; + } else { + psmouse->rate = 40; + cytp->mode &= ~CYTP_BIT_HIGH_RATE; + } + + ps2_command(&psmouse->ps2dev, (unsigned char *)&psmouse->rate, + PSMOUSE_CMD_SETRATE); +} + +static void cypress_disconnect(struct psmouse *psmouse) +{ + cypress_reset(psmouse); + kfree(psmouse->private); + psmouse->private = NULL; +} + +static int cypress_reconnect(struct psmouse *psmouse) +{ + int tries = CYTP_PS2_CMD_TRIES; + int rc; + + do { + cypress_reset(psmouse); + rc = cypress_detect(psmouse, false); + } while (rc && (--tries > 0)); + + if (rc) { + psmouse_err(psmouse, "Reconnect: unable to detect trackpad.\n"); + return -1; + } + + if (cypress_set_absolute_mode(psmouse)) { + psmouse_err(psmouse, "Reconnect: Unable to initialize Cypress absolute mode.\n"); + return -1; + } + + return 0; +} + +int cypress_init(struct psmouse *psmouse) +{ + struct cytp_data *cytp; + + cytp = kzalloc(sizeof(struct cytp_data), GFP_KERNEL); + if (!cytp) + return -ENOMEM; + + psmouse->private = cytp; + psmouse->pktsize = 8; + + cypress_reset(psmouse); + + if (cypress_query_hardware(psmouse)) { + psmouse_err(psmouse, "Unable to query Trackpad hardware.\n"); + goto err_exit; + } + + if (cypress_set_absolute_mode(psmouse)) { + psmouse_err(psmouse, "init: Unable to initialize Cypress absolute mode.\n"); + goto err_exit; + } + + if (cypress_set_input_params(psmouse->dev, cytp) < 0) { + psmouse_err(psmouse, "init: Unable to set input params.\n"); + goto err_exit; + } + + psmouse->model = 1; + psmouse->protocol_handler = cypress_protocol_handler; + psmouse->set_rate = cypress_set_rate; + psmouse->disconnect = cypress_disconnect; + psmouse->reconnect = cypress_reconnect; + psmouse->cleanup = cypress_reset; + psmouse->resync_time = 0; + + return 0; + +err_exit: + /* + * Reset Cypress Trackpad as a standard mouse. Then + * let psmouse driver communicating with it as default PS2 mouse. + */ + cypress_reset(psmouse); + + psmouse->private = NULL; + kfree(cytp); + + return -1; +} -- cgit v1.2.3