From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/mouse/elan_i2c_i2c.c | 781 +++++++++++++++++++++++++++++++++++++ 1 file changed, 781 insertions(+) create mode 100644 drivers/input/mouse/elan_i2c_i2c.c (limited to 'drivers/input/mouse/elan_i2c_i2c.c') diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c new file mode 100644 index 000000000..13dc097eb --- /dev/null +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -0,0 +1,781 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Elan I2C/SMBus Touchpad driver - I2C interface + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * Trademarks are the property of their respective owners. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "elan_i2c.h" + +/* Elan i2c commands */ +#define ETP_I2C_RESET 0x0100 +#define ETP_I2C_WAKE_UP 0x0800 +#define ETP_I2C_SLEEP 0x0801 +#define ETP_I2C_DESC_CMD 0x0001 +#define ETP_I2C_REPORT_DESC_CMD 0x0002 +#define ETP_I2C_STAND_CMD 0x0005 +#define ETP_I2C_PATTERN_CMD 0x0100 +#define ETP_I2C_UNIQUEID_CMD 0x0101 +#define ETP_I2C_FW_VERSION_CMD 0x0102 +#define ETP_I2C_IC_TYPE_CMD 0x0103 +#define ETP_I2C_OSM_VERSION_CMD 0x0103 +#define ETP_I2C_NSM_VERSION_CMD 0x0104 +#define ETP_I2C_XY_TRACENUM_CMD 0x0105 +#define ETP_I2C_MAX_X_AXIS_CMD 0x0106 +#define ETP_I2C_MAX_Y_AXIS_CMD 0x0107 +#define ETP_I2C_RESOLUTION_CMD 0x0108 +#define ETP_I2C_PRESSURE_CMD 0x010A +#define ETP_I2C_IAP_VERSION_CMD 0x0110 +#define ETP_I2C_IC_TYPE_P0_CMD 0x0110 +#define ETP_I2C_IAP_VERSION_P0_CMD 0x0111 +#define ETP_I2C_SET_CMD 0x0300 +#define ETP_I2C_POWER_CMD 0x0307 +#define ETP_I2C_FW_CHECKSUM_CMD 0x030F +#define ETP_I2C_IAP_CTRL_CMD 0x0310 +#define ETP_I2C_IAP_CMD 0x0311 +#define ETP_I2C_IAP_RESET_CMD 0x0314 +#define ETP_I2C_IAP_CHECKSUM_CMD 0x0315 +#define ETP_I2C_CALIBRATE_CMD 0x0316 +#define ETP_I2C_MAX_BASELINE_CMD 0x0317 +#define ETP_I2C_MIN_BASELINE_CMD 0x0318 +#define ETP_I2C_IAP_TYPE_REG 0x0040 +#define ETP_I2C_IAP_TYPE_CMD 0x0304 + +#define ETP_I2C_REPORT_LEN 34 +#define ETP_I2C_REPORT_LEN_ID2 39 +#define ETP_I2C_REPORT_MAX_LEN 39 +#define ETP_I2C_DESC_LENGTH 30 +#define ETP_I2C_REPORT_DESC_LENGTH 158 +#define ETP_I2C_INF_LENGTH 2 +#define ETP_I2C_IAP_PASSWORD 0x1EA5 +#define ETP_I2C_IAP_RESET 0xF0F0 +#define ETP_I2C_MAIN_MODE_ON (1 << 9) +#define ETP_I2C_IAP_REG_L 0x01 +#define ETP_I2C_IAP_REG_H 0x06 + +static int elan_i2c_read_block(struct i2c_client *client, + u16 reg, u8 *val, u16 len) +{ + __le16 buf[] = { + cpu_to_le16(reg), + }; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = client->flags & I2C_M_TEN, + .len = sizeof(buf), + .buf = (u8 *)buf, + }, + { + .addr = client->addr, + .flags = (client->flags & I2C_M_TEN) | I2C_M_RD, + .len = len, + .buf = val, + } + }; + int ret; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + return ret == ARRAY_SIZE(msgs) ? 0 : (ret < 0 ? ret : -EIO); +} + +static int elan_i2c_read_cmd(struct i2c_client *client, u16 reg, u8 *val) +{ + int retval; + + retval = elan_i2c_read_block(client, reg, val, ETP_I2C_INF_LENGTH); + if (retval < 0) { + dev_err(&client->dev, "reading cmd (0x%04x) fail.\n", reg); + return retval; + } + + return 0; +} + +static int elan_i2c_write_cmd(struct i2c_client *client, u16 reg, u16 cmd) +{ + __le16 buf[] = { + cpu_to_le16(reg), + cpu_to_le16(cmd), + }; + struct i2c_msg msg = { + .addr = client->addr, + .flags = client->flags & I2C_M_TEN, + .len = sizeof(buf), + .buf = (u8 *)buf, + }; + int ret; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret != 1) { + if (ret >= 0) + ret = -EIO; + dev_err(&client->dev, "writing cmd (0x%04x) failed: %d\n", + reg, ret); + return ret; + } + + return 0; +} + +static int elan_i2c_initialize(struct i2c_client *client) +{ + struct device *dev = &client->dev; + int error; + u8 val[256]; + + error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET); + if (error) { + dev_err(dev, "device reset failed: %d\n", error); + return error; + } + + /* Wait for the device to reset */ + msleep(100); + + /* get reset acknowledgement 0000 */ + error = i2c_master_recv(client, val, ETP_I2C_INF_LENGTH); + if (error < 0) { + dev_err(dev, "failed to read reset response: %d\n", error); + return error; + } + + error = elan_i2c_read_block(client, ETP_I2C_DESC_CMD, + val, ETP_I2C_DESC_LENGTH); + if (error) { + dev_err(dev, "cannot get device descriptor: %d\n", error); + return error; + } + + error = elan_i2c_read_block(client, ETP_I2C_REPORT_DESC_CMD, + val, ETP_I2C_REPORT_DESC_LENGTH); + if (error) { + dev_err(dev, "fetching report descriptor failed.: %d\n", error); + return error; + } + + return 0; +} + +static int elan_i2c_sleep_control(struct i2c_client *client, bool sleep) +{ + return elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, + sleep ? ETP_I2C_SLEEP : ETP_I2C_WAKE_UP); +} + +static int elan_i2c_power_control(struct i2c_client *client, bool enable) +{ + u8 val[2]; + u16 reg; + int error; + + error = elan_i2c_read_cmd(client, ETP_I2C_POWER_CMD, val); + if (error) { + dev_err(&client->dev, + "failed to read current power state: %d\n", + error); + return error; + } + + reg = le16_to_cpup((__le16 *)val); + if (enable) + reg &= ~ETP_DISABLE_POWER; + else + reg |= ETP_DISABLE_POWER; + + error = elan_i2c_write_cmd(client, ETP_I2C_POWER_CMD, reg); + if (error) { + dev_err(&client->dev, + "failed to write current power state: %d\n", + error); + return error; + } + + return 0; +} + +static int elan_i2c_set_mode(struct i2c_client *client, u8 mode) +{ + return elan_i2c_write_cmd(client, ETP_I2C_SET_CMD, mode); +} + + +static int elan_i2c_calibrate(struct i2c_client *client) +{ + return elan_i2c_write_cmd(client, ETP_I2C_CALIBRATE_CMD, 1); +} + +static int elan_i2c_calibrate_result(struct i2c_client *client, u8 *val) +{ + return elan_i2c_read_block(client, ETP_I2C_CALIBRATE_CMD, val, 1); +} + +static int elan_i2c_get_baseline_data(struct i2c_client *client, + bool max_baseline, u8 *value) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, + max_baseline ? ETP_I2C_MAX_BASELINE_CMD : + ETP_I2C_MIN_BASELINE_CMD, + val); + if (error) + return error; + + *value = le16_to_cpup((__le16 *)val); + + return 0; +} + +static int elan_i2c_get_pattern(struct i2c_client *client, u8 *pattern) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_PATTERN_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get pattern: %d\n", error); + return error; + } + + /* + * Not all versions of firmware implement "get pattern" command. + * When this command is not implemented the device will respond + * with 0xFF 0xFF, which we will treat as "old" pattern 0. + */ + *pattern = val[0] == 0xFF && val[1] == 0xFF ? 0 : val[1]; + + return 0; +} + +static int elan_i2c_get_version(struct i2c_client *client, + u8 pattern, bool iap, u8 *version) +{ + int error; + u16 cmd; + u8 val[3]; + + if (!iap) + cmd = ETP_I2C_FW_VERSION_CMD; + else if (pattern == 0) + cmd = ETP_I2C_IAP_VERSION_P0_CMD; + else + cmd = ETP_I2C_IAP_VERSION_CMD; + + error = elan_i2c_read_cmd(client, cmd, val); + if (error) { + dev_err(&client->dev, "failed to get %s version: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + if (pattern >= 0x01) + *version = iap ? val[1] : val[0]; + else + *version = val[0]; + return 0; +} + +static int elan_i2c_get_sm_version(struct i2c_client *client, u8 pattern, + u16 *ic_type, u8 *version, u8 *clickpad) +{ + int error; + u8 val[3]; + + if (pattern >= 0x01) { + error = elan_i2c_read_cmd(client, ETP_I2C_IC_TYPE_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get ic type: %d\n", + error); + return error; + } + *ic_type = be16_to_cpup((__be16 *)val); + + error = elan_i2c_read_cmd(client, ETP_I2C_NSM_VERSION_CMD, + val); + if (error) { + dev_err(&client->dev, "failed to get SM version: %d\n", + error); + return error; + } + *version = val[1]; + *clickpad = val[0] & 0x10; + } else { + error = elan_i2c_read_cmd(client, ETP_I2C_OSM_VERSION_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get SM version: %d\n", + error); + return error; + } + *version = val[0]; + + error = elan_i2c_read_cmd(client, ETP_I2C_IC_TYPE_P0_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get ic type: %d\n", + error); + return error; + } + *ic_type = val[0]; + + error = elan_i2c_read_cmd(client, ETP_I2C_NSM_VERSION_CMD, + val); + if (error) { + dev_err(&client->dev, "failed to get SM version: %d\n", + error); + return error; + } + *clickpad = val[0] & 0x10; + } + + return 0; +} + +static int elan_i2c_get_product_id(struct i2c_client *client, u16 *id) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_UNIQUEID_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get product ID: %d\n", error); + return error; + } + + *id = le16_to_cpup((__le16 *)val); + return 0; +} + +static int elan_i2c_get_checksum(struct i2c_client *client, + bool iap, u16 *csum) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, + iap ? ETP_I2C_IAP_CHECKSUM_CMD : + ETP_I2C_FW_CHECKSUM_CMD, + val); + if (error) { + dev_err(&client->dev, "failed to get %s checksum: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + *csum = le16_to_cpup((__le16 *)val); + return 0; +} + +static int elan_i2c_get_max(struct i2c_client *client, + unsigned int *max_x, unsigned int *max_y) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_MAX_X_AXIS_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get X dimension: %d\n", error); + return error; + } + + *max_x = le16_to_cpup((__le16 *)val); + + error = elan_i2c_read_cmd(client, ETP_I2C_MAX_Y_AXIS_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get Y dimension: %d\n", error); + return error; + } + + *max_y = le16_to_cpup((__le16 *)val); + + return 0; +} + +static int elan_i2c_get_resolution(struct i2c_client *client, + u8 *hw_res_x, u8 *hw_res_y) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_RESOLUTION_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get resolution: %d\n", error); + return error; + } + + *hw_res_x = val[0]; + *hw_res_y = val[1]; + + return 0; +} + +static int elan_i2c_get_num_traces(struct i2c_client *client, + unsigned int *x_traces, + unsigned int *y_traces) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_XY_TRACENUM_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get trace info: %d\n", error); + return error; + } + + *x_traces = val[0]; + *y_traces = val[1]; + + return 0; +} + +static int elan_i2c_get_pressure_adjustment(struct i2c_client *client, + int *adjustment) +{ + int error; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_PRESSURE_CMD, val); + if (error) { + dev_err(&client->dev, "failed to get pressure format: %d\n", + error); + return error; + } + + if ((val[0] >> 4) & 0x1) + *adjustment = 0; + else + *adjustment = ETP_PRESSURE_OFFSET; + + return 0; +} + +static int elan_i2c_iap_get_mode(struct i2c_client *client, enum tp_mode *mode) +{ + int error; + u16 constant; + u8 val[3]; + + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val); + if (error) { + dev_err(&client->dev, + "failed to read iap control register: %d\n", + error); + return error; + } + + constant = le16_to_cpup((__le16 *)val); + dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant); + + *mode = (constant & ETP_I2C_MAIN_MODE_ON) ? MAIN_MODE : IAP_MODE; + + return 0; +} + +static int elan_i2c_iap_reset(struct i2c_client *client) +{ + int error; + + error = elan_i2c_write_cmd(client, ETP_I2C_IAP_RESET_CMD, + ETP_I2C_IAP_RESET); + if (error) { + dev_err(&client->dev, "cannot reset IC: %d\n", error); + return error; + } + + return 0; +} + +static int elan_i2c_set_flash_key(struct i2c_client *client) +{ + int error; + + error = elan_i2c_write_cmd(client, ETP_I2C_IAP_CMD, + ETP_I2C_IAP_PASSWORD); + if (error) { + dev_err(&client->dev, "cannot set flash key: %d\n", error); + return error; + } + + return 0; +} + +static int elan_read_write_iap_type(struct i2c_client *client, u16 fw_page_size) +{ + int error; + u16 constant; + u8 val[3]; + int retry = 3; + + do { + error = elan_i2c_write_cmd(client, ETP_I2C_IAP_TYPE_CMD, + fw_page_size / 2); + if (error) { + dev_err(&client->dev, + "cannot write iap type: %d\n", error); + return error; + } + + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_TYPE_CMD, val); + if (error) { + dev_err(&client->dev, + "failed to read iap type register: %d\n", + error); + return error; + } + constant = le16_to_cpup((__le16 *)val); + dev_dbg(&client->dev, "iap type reg: 0x%04x\n", constant); + + if (constant == fw_page_size / 2) + return 0; + + } while (--retry > 0); + + dev_err(&client->dev, "cannot set iap type\n"); + return -EIO; +} + +static int elan_i2c_prepare_fw_update(struct i2c_client *client, u16 ic_type, + u8 iap_version, u16 fw_page_size) +{ + struct device *dev = &client->dev; + int error; + enum tp_mode mode; + u8 val[3]; + u16 password; + + /* Get FW in which mode (IAP_MODE/MAIN_MODE) */ + error = elan_i2c_iap_get_mode(client, &mode); + if (error) + return error; + + if (mode == IAP_MODE) { + /* Reset IC */ + error = elan_i2c_iap_reset(client); + if (error) + return error; + + msleep(30); + } + + /* Set flash key*/ + error = elan_i2c_set_flash_key(client); + if (error) + return error; + + /* Wait for F/W IAP initialization */ + msleep(mode == MAIN_MODE ? 100 : 30); + + /* Check if we are in IAP mode or not */ + error = elan_i2c_iap_get_mode(client, &mode); + if (error) + return error; + + if (mode == MAIN_MODE) { + dev_err(dev, "wrong mode: %d\n", mode); + return -EIO; + } + + if (ic_type >= 0x0D && iap_version >= 1) { + error = elan_read_write_iap_type(client, fw_page_size); + if (error) + return error; + } + + /* Set flash key again */ + error = elan_i2c_set_flash_key(client); + if (error) + return error; + + /* Wait for F/W IAP initialization */ + msleep(30); + + /* read back to check we actually enabled successfully. */ + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CMD, val); + if (error) { + dev_err(dev, "cannot read iap password: %d\n", + error); + return error; + } + + password = le16_to_cpup((__le16 *)val); + if (password != ETP_I2C_IAP_PASSWORD) { + dev_err(dev, "wrong iap password: 0x%X\n", password); + return -EIO; + } + + return 0; +} + +static int elan_i2c_write_fw_block(struct i2c_client *client, u16 fw_page_size, + const u8 *page, u16 checksum, int idx) +{ + struct device *dev = &client->dev; + u8 *page_store; + u8 val[3]; + u16 result; + int ret, error; + + page_store = kmalloc(fw_page_size + 4, GFP_KERNEL); + if (!page_store) + return -ENOMEM; + + page_store[0] = ETP_I2C_IAP_REG_L; + page_store[1] = ETP_I2C_IAP_REG_H; + memcpy(&page_store[2], page, fw_page_size); + /* recode checksum at last two bytes */ + put_unaligned_le16(checksum, &page_store[fw_page_size + 2]); + + ret = i2c_master_send(client, page_store, fw_page_size + 4); + if (ret != fw_page_size + 4) { + error = ret < 0 ? ret : -EIO; + dev_err(dev, "Failed to write page %d: %d\n", idx, error); + goto exit; + } + + /* Wait for F/W to update one page ROM data. */ + msleep(fw_page_size == ETP_FW_PAGE_SIZE_512 ? 50 : 35); + + error = elan_i2c_read_cmd(client, ETP_I2C_IAP_CTRL_CMD, val); + if (error) { + dev_err(dev, "Failed to read IAP write result: %d\n", error); + goto exit; + } + + result = le16_to_cpup((__le16 *)val); + if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) { + dev_err(dev, "IAP reports failed write: %04hx\n", + result); + error = -EIO; + goto exit; + } + +exit: + kfree(page_store); + return error; +} + +static int elan_i2c_finish_fw_update(struct i2c_client *client, + struct completion *completion) +{ + struct device *dev = &client->dev; + int error = 0; + int len; + u8 buffer[ETP_I2C_REPORT_MAX_LEN]; + + len = i2c_master_recv(client, buffer, ETP_I2C_REPORT_MAX_LEN); + if (len <= 0) { + error = len < 0 ? len : -EIO; + dev_warn(dev, "failed to read I2C data after FW WDT reset: %d (%d)\n", + error, len); + } + + reinit_completion(completion); + enable_irq(client->irq); + + error = elan_i2c_write_cmd(client, ETP_I2C_STAND_CMD, ETP_I2C_RESET); + if (error) { + dev_err(dev, "device reset failed: %d\n", error); + } else if (!wait_for_completion_timeout(completion, + msecs_to_jiffies(300))) { + dev_err(dev, "timeout waiting for device reset\n"); + error = -ETIMEDOUT; + } + + disable_irq(client->irq); + + if (error) + return error; + + len = i2c_master_recv(client, buffer, ETP_I2C_INF_LENGTH); + if (len != ETP_I2C_INF_LENGTH) { + error = len < 0 ? len : -EIO; + dev_err(dev, "failed to read INT signal: %d (%d)\n", + error, len); + return error; + } + + return 0; +} + +static int elan_i2c_get_report_features(struct i2c_client *client, u8 pattern, + unsigned int *features, + unsigned int *report_len) +{ + *features = ETP_FEATURE_REPORT_MK; + *report_len = pattern <= 0x01 ? + ETP_I2C_REPORT_LEN : ETP_I2C_REPORT_LEN_ID2; + return 0; +} + +static int elan_i2c_get_report(struct i2c_client *client, + u8 *report, unsigned int report_len) +{ + int len; + + len = i2c_master_recv(client, report, report_len); + if (len < 0) { + dev_err(&client->dev, "failed to read report data: %d\n", len); + return len; + } + + if (len != report_len) { + dev_err(&client->dev, + "wrong report length (%d vs %d expected)\n", + len, report_len); + return -EIO; + } + + return 0; +} + +const struct elan_transport_ops elan_i2c_ops = { + .initialize = elan_i2c_initialize, + .sleep_control = elan_i2c_sleep_control, + .power_control = elan_i2c_power_control, + .set_mode = elan_i2c_set_mode, + + .calibrate = elan_i2c_calibrate, + .calibrate_result = elan_i2c_calibrate_result, + + .get_baseline_data = elan_i2c_get_baseline_data, + + .get_version = elan_i2c_get_version, + .get_sm_version = elan_i2c_get_sm_version, + .get_product_id = elan_i2c_get_product_id, + .get_checksum = elan_i2c_get_checksum, + .get_pressure_adjustment = elan_i2c_get_pressure_adjustment, + + .get_max = elan_i2c_get_max, + .get_resolution = elan_i2c_get_resolution, + .get_num_traces = elan_i2c_get_num_traces, + + .iap_get_mode = elan_i2c_iap_get_mode, + .iap_reset = elan_i2c_iap_reset, + + .prepare_fw_update = elan_i2c_prepare_fw_update, + .write_fw_block = elan_i2c_write_fw_block, + .finish_fw_update = elan_i2c_finish_fw_update, + + .get_pattern = elan_i2c_get_pattern, + + .get_report_features = elan_i2c_get_report_features, + .get_report = elan_i2c_get_report, +}; -- cgit v1.2.3