From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/mouse/elan_i2c_smbus.c | 558 +++++++++++++++++++++++++++++++++++ 1 file changed, 558 insertions(+) create mode 100644 drivers/input/mouse/elan_i2c_smbus.c (limited to 'drivers/input/mouse/elan_i2c_smbus.c') diff --git a/drivers/input/mouse/elan_i2c_smbus.c b/drivers/input/mouse/elan_i2c_smbus.c new file mode 100644 index 000000000..6dc148b9d --- /dev/null +++ b/drivers/input/mouse/elan_i2c_smbus.c @@ -0,0 +1,558 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Elan I2C/SMBus Touchpad driver - SMBus interface + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * Trademarks are the property of their respective owners. + */ + +#include +#include +#include +#include + +#include "elan_i2c.h" + +/* Elan SMbus commands */ +#define ETP_SMBUS_IAP_CMD 0x00 +#define ETP_SMBUS_ENABLE_TP 0x20 +#define ETP_SMBUS_SLEEP_CMD 0x21 +#define ETP_SMBUS_IAP_PASSWORD_WRITE 0x29 +#define ETP_SMBUS_IAP_PASSWORD_READ 0x80 +#define ETP_SMBUS_WRITE_FW_BLOCK 0x2A +#define ETP_SMBUS_IAP_RESET_CMD 0x2B +#define ETP_SMBUS_RANGE_CMD 0xA0 +#define ETP_SMBUS_FW_VERSION_CMD 0xA1 +#define ETP_SMBUS_XY_TRACENUM_CMD 0xA2 +#define ETP_SMBUS_SM_VERSION_CMD 0xA3 +#define ETP_SMBUS_UNIQUEID_CMD 0xA3 +#define ETP_SMBUS_RESOLUTION_CMD 0xA4 +#define ETP_SMBUS_HELLOPACKET_CMD 0xA7 +#define ETP_SMBUS_PACKET_QUERY 0xA8 +#define ETP_SMBUS_IAP_VERSION_CMD 0xAC +#define ETP_SMBUS_IAP_CTRL_CMD 0xAD +#define ETP_SMBUS_IAP_CHECKSUM_CMD 0xAE +#define ETP_SMBUS_FW_CHECKSUM_CMD 0xAF +#define ETP_SMBUS_MAX_BASELINE_CMD 0xC3 +#define ETP_SMBUS_MIN_BASELINE_CMD 0xC4 +#define ETP_SMBUS_CALIBRATE_QUERY 0xC5 + +#define ETP_SMBUS_REPORT_LEN 32 +#define ETP_SMBUS_REPORT_LEN2 7 +#define ETP_SMBUS_REPORT_OFFSET 2 +#define ETP_SMBUS_HELLOPACKET_LEN 5 +#define ETP_SMBUS_IAP_PASSWORD 0x1234 +#define ETP_SMBUS_IAP_MODE_ON (1 << 6) + +static int elan_smbus_initialize(struct i2c_client *client) +{ + u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 }; + u8 values[I2C_SMBUS_BLOCK_MAX] = {0}; + int len, error; + + /* Get hello packet */ + len = i2c_smbus_read_block_data(client, + ETP_SMBUS_HELLOPACKET_CMD, values); + if (len != ETP_SMBUS_HELLOPACKET_LEN) { + dev_err(&client->dev, "hello packet length fail: %d\n", len); + error = len < 0 ? len : -EIO; + return error; + } + + /* compare hello packet */ + if (memcmp(values, check, ETP_SMBUS_HELLOPACKET_LEN)) { + dev_err(&client->dev, "hello packet fail [%*ph]\n", + ETP_SMBUS_HELLOPACKET_LEN, values); + return -ENXIO; + } + + /* enable tp */ + error = i2c_smbus_write_byte(client, ETP_SMBUS_ENABLE_TP); + if (error) { + dev_err(&client->dev, "failed to enable touchpad: %d\n", error); + return error; + } + + return 0; +} + +static int elan_smbus_set_mode(struct i2c_client *client, u8 mode) +{ + u8 cmd[4] = { 0x00, 0x07, 0x00, mode }; + + return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); +} + +static int elan_smbus_sleep_control(struct i2c_client *client, bool sleep) +{ + if (sleep) + return i2c_smbus_write_byte(client, ETP_SMBUS_SLEEP_CMD); + else + return 0; /* XXX should we send ETP_SMBUS_ENABLE_TP here? */ +} + +static int elan_smbus_power_control(struct i2c_client *client, bool enable) +{ + return 0; /* A no-op */ +} + +static int elan_smbus_calibrate(struct i2c_client *client) +{ + u8 cmd[4] = { 0x00, 0x08, 0x00, 0x01 }; + + return i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); +} + +static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val) +{ + int error; + u8 buf[I2C_SMBUS_BLOCK_MAX] = {0}; + + BUILD_BUG_ON(ETP_CALIBRATE_MAX_LEN > sizeof(buf)); + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_CALIBRATE_QUERY, buf); + if (error < 0) + return error; + + memcpy(val, buf, ETP_CALIBRATE_MAX_LEN); + return 0; +} + +static int elan_smbus_get_baseline_data(struct i2c_client *client, + bool max_baseline, u8 *value) +{ + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + error = i2c_smbus_read_block_data(client, + max_baseline ? + ETP_SMBUS_MAX_BASELINE_CMD : + ETP_SMBUS_MIN_BASELINE_CMD, + val); + if (error < 0) + return error; + + *value = be16_to_cpup((__be16 *)val); + + return 0; +} + +static int elan_smbus_get_version(struct i2c_client *client, + u8 pattern, bool iap, u8 *version) +{ + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + error = i2c_smbus_read_block_data(client, + iap ? ETP_SMBUS_IAP_VERSION_CMD : + ETP_SMBUS_FW_VERSION_CMD, + val); + if (error < 0) { + dev_err(&client->dev, "failed to get %s version: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + *version = val[2]; + return 0; +} + +static int elan_smbus_get_sm_version(struct i2c_client *client, u8 pattern, + u16 *ic_type, u8 *version, u8 *clickpad) +{ + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_SM_VERSION_CMD, val); + if (error < 0) { + dev_err(&client->dev, "failed to get SM version: %d\n", error); + return error; + } + + *version = val[0]; + *ic_type = val[1]; + *clickpad = val[0] & 0x10; + return 0; +} + +static int elan_smbus_get_product_id(struct i2c_client *client, u16 *id) +{ + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_UNIQUEID_CMD, val); + if (error < 0) { + dev_err(&client->dev, "failed to get product ID: %d\n", error); + return error; + } + + *id = be16_to_cpup((__be16 *)val); + return 0; +} + +static int elan_smbus_get_checksum(struct i2c_client *client, + bool iap, u16 *csum) +{ + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + error = i2c_smbus_read_block_data(client, + iap ? ETP_SMBUS_FW_CHECKSUM_CMD : + ETP_SMBUS_IAP_CHECKSUM_CMD, + val); + if (error < 0) { + dev_err(&client->dev, "failed to get %s checksum: %d\n", + iap ? "IAP" : "FW", error); + return error; + } + + *csum = be16_to_cpup((__be16 *)val); + return 0; +} + +static int elan_smbus_get_max(struct i2c_client *client, + unsigned int *max_x, unsigned int *max_y) +{ + int ret; + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + ret = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val); + if (ret != 3) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "failed to get dimensions: %d\n", error); + return error; + } + + *max_x = (0x0f & val[0]) << 8 | val[1]; + *max_y = (0xf0 & val[0]) << 4 | val[2]; + + return 0; +} + +static int elan_smbus_get_resolution(struct i2c_client *client, + u8 *hw_res_x, u8 *hw_res_y) +{ + int ret; + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + ret = i2c_smbus_read_block_data(client, ETP_SMBUS_RESOLUTION_CMD, val); + if (ret != 3) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "failed to get resolution: %d\n", error); + return error; + } + + *hw_res_x = val[1] & 0x0F; + *hw_res_y = (val[1] & 0xF0) >> 4; + + return 0; +} + +static int elan_smbus_get_num_traces(struct i2c_client *client, + unsigned int *x_traces, + unsigned int *y_traces) +{ + int ret; + int error; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + ret = i2c_smbus_read_block_data(client, ETP_SMBUS_XY_TRACENUM_CMD, val); + if (ret != 3) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "failed to get trace info: %d\n", error); + return error; + } + + *x_traces = val[1]; + *y_traces = val[2]; + + return 0; +} + +static int elan_smbus_get_pressure_adjustment(struct i2c_client *client, + int *adjustment) +{ + *adjustment = ETP_PRESSURE_OFFSET; + return 0; +} + +static int elan_smbus_iap_get_mode(struct i2c_client *client, + enum tp_mode *mode) +{ + int error; + u16 constant; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + error = i2c_smbus_read_block_data(client, ETP_SMBUS_IAP_CTRL_CMD, val); + if (error < 0) { + dev_err(&client->dev, "failed to read iap ctrol register: %d\n", + error); + return error; + } + + constant = be16_to_cpup((__be16 *)val); + dev_dbg(&client->dev, "iap control reg: 0x%04x.\n", constant); + + *mode = (constant & ETP_SMBUS_IAP_MODE_ON) ? IAP_MODE : MAIN_MODE; + + return 0; +} + +static int elan_smbus_iap_reset(struct i2c_client *client) +{ + int error; + + error = i2c_smbus_write_byte(client, ETP_SMBUS_IAP_RESET_CMD); + if (error) { + dev_err(&client->dev, "cannot reset IC: %d\n", error); + return error; + } + + return 0; +} + +static int elan_smbus_set_flash_key(struct i2c_client *client) +{ + int error; + u8 cmd[4] = { 0x00, 0x0B, 0x00, 0x5A }; + + error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); + if (error) { + dev_err(&client->dev, "cannot set flash key: %d\n", error); + return error; + } + + return 0; +} + +static int elan_smbus_prepare_fw_update(struct i2c_client *client, u16 ic_type, + u8 iap_version, u16 fw_page_size) +{ + struct device *dev = &client->dev; + int len; + int error; + enum tp_mode mode; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + u8 cmd[4] = {0x0F, 0x78, 0x00, 0x06}; + u16 password; + + /* Get FW in which mode (IAP_MODE/MAIN_MODE) */ + error = elan_smbus_iap_get_mode(client, &mode); + if (error) + return error; + + if (mode == MAIN_MODE) { + + /* set flash key */ + error = elan_smbus_set_flash_key(client); + if (error) + return error; + + /* write iap password */ + if (i2c_smbus_write_byte(client, + ETP_SMBUS_IAP_PASSWORD_WRITE) < 0) { + dev_err(dev, "cannot write iap password\n"); + return -EIO; + } + + error = i2c_smbus_write_block_data(client, ETP_SMBUS_IAP_CMD, + sizeof(cmd), cmd); + if (error) { + dev_err(dev, "failed to write iap password: %d\n", + error); + return error; + } + + /* + * Read back password to make sure we enabled flash + * successfully. + */ + len = i2c_smbus_read_block_data(client, + ETP_SMBUS_IAP_PASSWORD_READ, + val); + if (len < (int)sizeof(u16)) { + error = len < 0 ? len : -EIO; + dev_err(dev, "failed to read iap password: %d\n", + error); + return error; + } + + password = be16_to_cpup((__be16 *)val); + if (password != ETP_SMBUS_IAP_PASSWORD) { + dev_err(dev, "wrong iap password = 0x%X\n", password); + return -EIO; + } + + /* Wait 30ms for MAIN_MODE change to IAP_MODE */ + msleep(30); + } + + error = elan_smbus_set_flash_key(client); + if (error) + return error; + + /* Reset IC */ + error = elan_smbus_iap_reset(client); + if (error) + return error; + + return 0; +} + + +static int elan_smbus_write_fw_block(struct i2c_client *client, u16 fw_page_size, + const u8 *page, u16 checksum, int idx) +{ + struct device *dev = &client->dev; + int error; + u16 result; + u8 val[I2C_SMBUS_BLOCK_MAX] = {0}; + + /* + * Due to the limitation of smbus protocol limiting + * transfer to 32 bytes at a time, we must split block + * in 2 transfers. + */ + error = i2c_smbus_write_block_data(client, + ETP_SMBUS_WRITE_FW_BLOCK, + fw_page_size / 2, + page); + if (error) { + dev_err(dev, "Failed to write page %d (part %d): %d\n", + idx, 1, error); + return error; + } + + error = i2c_smbus_write_block_data(client, + ETP_SMBUS_WRITE_FW_BLOCK, + fw_page_size / 2, + page + fw_page_size / 2); + if (error) { + dev_err(dev, "Failed to write page %d (part %d): %d\n", + idx, 2, error); + return error; + } + + + /* Wait for F/W to update one page ROM data. */ + usleep_range(8000, 10000); + + error = i2c_smbus_read_block_data(client, + ETP_SMBUS_IAP_CTRL_CMD, val); + if (error < 0) { + dev_err(dev, "Failed to read IAP write result: %d\n", + error); + return error; + } + + result = be16_to_cpup((__be16 *)val); + if (result & (ETP_FW_IAP_PAGE_ERR | ETP_FW_IAP_INTF_ERR)) { + dev_err(dev, "IAP reports failed write: %04hx\n", + result); + return -EIO; + } + + return 0; +} + +static int elan_smbus_get_report_features(struct i2c_client *client, u8 pattern, + unsigned int *features, + unsigned int *report_len) +{ + /* + * SMBus controllers with pattern 2 lack area info, as newer + * high-precision packets use that space for coordinates. + */ + *features = pattern <= 0x01 ? ETP_FEATURE_REPORT_MK : 0; + *report_len = ETP_SMBUS_REPORT_LEN; + return 0; +} + +static int elan_smbus_get_report(struct i2c_client *client, + u8 *report, unsigned int report_len) +{ + int len; + + BUILD_BUG_ON(I2C_SMBUS_BLOCK_MAX > ETP_SMBUS_REPORT_LEN); + + len = i2c_smbus_read_block_data(client, + ETP_SMBUS_PACKET_QUERY, + &report[ETP_SMBUS_REPORT_OFFSET]); + if (len < 0) { + dev_err(&client->dev, "failed to read report data: %d\n", len); + return len; + } + + if (report[ETP_REPORT_ID_OFFSET] == ETP_TP_REPORT_ID2) + report_len = ETP_SMBUS_REPORT_LEN2; + + if (len != report_len) { + dev_err(&client->dev, + "wrong report length (%d vs %d expected)\n", + len, report_len); + return -EIO; + } + + return 0; +} + +static int elan_smbus_finish_fw_update(struct i2c_client *client, + struct completion *fw_completion) +{ + /* No special handling unlike I2C transport */ + return 0; +} + +static int elan_smbus_get_pattern(struct i2c_client *client, u8 *pattern) +{ + *pattern = 0; + return 0; +} + +const struct elan_transport_ops elan_smbus_ops = { + .initialize = elan_smbus_initialize, + .sleep_control = elan_smbus_sleep_control, + .power_control = elan_smbus_power_control, + .set_mode = elan_smbus_set_mode, + + .calibrate = elan_smbus_calibrate, + .calibrate_result = elan_smbus_calibrate_result, + + .get_baseline_data = elan_smbus_get_baseline_data, + + .get_version = elan_smbus_get_version, + .get_sm_version = elan_smbus_get_sm_version, + .get_product_id = elan_smbus_get_product_id, + .get_checksum = elan_smbus_get_checksum, + .get_pressure_adjustment = elan_smbus_get_pressure_adjustment, + + .get_max = elan_smbus_get_max, + .get_resolution = elan_smbus_get_resolution, + .get_num_traces = elan_smbus_get_num_traces, + + .iap_get_mode = elan_smbus_iap_get_mode, + .iap_reset = elan_smbus_iap_reset, + + .prepare_fw_update = elan_smbus_prepare_fw_update, + .write_fw_block = elan_smbus_write_fw_block, + .finish_fw_update = elan_smbus_finish_fw_update, + + .get_report_features = elan_smbus_get_report_features, + .get_report = elan_smbus_get_report, + .get_pattern = elan_smbus_get_pattern, +}; -- cgit v1.2.3