From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/mouse/logibm.c | 166 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 drivers/input/mouse/logibm.c (limited to 'drivers/input/mouse/logibm.c') diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c new file mode 100644 index 000000000..0aab63dbc --- /dev/null +++ b/drivers/input/mouse/logibm.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 1999-2001 Vojtech Pavlik + * + * Based on the work of: + * James Banks Matthew Dillon + * David Giller Nathan Laredo + * Linus Torvalds Johan Myreen + * Cliff Matthews Philip Blundell + * Russell King + */ + +/* + * Logitech Bus Mouse Driver for Linux + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +MODULE_AUTHOR("Vojtech Pavlik "); +MODULE_DESCRIPTION("Logitech busmouse driver"); +MODULE_LICENSE("GPL"); + +#define LOGIBM_BASE 0x23c +#define LOGIBM_EXTENT 4 + +#define LOGIBM_DATA_PORT LOGIBM_BASE + 0 +#define LOGIBM_SIGNATURE_PORT LOGIBM_BASE + 1 +#define LOGIBM_CONTROL_PORT LOGIBM_BASE + 2 +#define LOGIBM_CONFIG_PORT LOGIBM_BASE + 3 + +#define LOGIBM_ENABLE_IRQ 0x00 +#define LOGIBM_DISABLE_IRQ 0x10 +#define LOGIBM_READ_X_LOW 0x80 +#define LOGIBM_READ_X_HIGH 0xa0 +#define LOGIBM_READ_Y_LOW 0xc0 +#define LOGIBM_READ_Y_HIGH 0xe0 + +#define LOGIBM_DEFAULT_MODE 0x90 +#define LOGIBM_CONFIG_BYTE 0x91 +#define LOGIBM_SIGNATURE_BYTE 0xa5 + +#define LOGIBM_IRQ 5 + +static int logibm_irq = LOGIBM_IRQ; +module_param_hw_named(irq, logibm_irq, uint, irq, 0); +MODULE_PARM_DESC(irq, "IRQ number (5=default)"); + +static struct input_dev *logibm_dev; + +static irqreturn_t logibm_interrupt(int irq, void *dev_id) +{ + char dx, dy; + unsigned char buttons; + + outb(LOGIBM_READ_X_LOW, LOGIBM_CONTROL_PORT); + dx = (inb(LOGIBM_DATA_PORT) & 0xf); + outb(LOGIBM_READ_X_HIGH, LOGIBM_CONTROL_PORT); + dx |= (inb(LOGIBM_DATA_PORT) & 0xf) << 4; + outb(LOGIBM_READ_Y_LOW, LOGIBM_CONTROL_PORT); + dy = (inb(LOGIBM_DATA_PORT) & 0xf); + outb(LOGIBM_READ_Y_HIGH, LOGIBM_CONTROL_PORT); + buttons = inb(LOGIBM_DATA_PORT); + dy |= (buttons & 0xf) << 4; + buttons = ~buttons >> 5; + + input_report_rel(logibm_dev, REL_X, dx); + input_report_rel(logibm_dev, REL_Y, dy); + input_report_key(logibm_dev, BTN_RIGHT, buttons & 1); + input_report_key(logibm_dev, BTN_MIDDLE, buttons & 2); + input_report_key(logibm_dev, BTN_LEFT, buttons & 4); + input_sync(logibm_dev); + + outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); + return IRQ_HANDLED; +} + +static int logibm_open(struct input_dev *dev) +{ + if (request_irq(logibm_irq, logibm_interrupt, 0, "logibm", NULL)) { + printk(KERN_ERR "logibm.c: Can't allocate irq %d\n", logibm_irq); + return -EBUSY; + } + outb(LOGIBM_ENABLE_IRQ, LOGIBM_CONTROL_PORT); + return 0; +} + +static void logibm_close(struct input_dev *dev) +{ + outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); + free_irq(logibm_irq, NULL); +} + +static int __init logibm_init(void) +{ + int err; + + if (!request_region(LOGIBM_BASE, LOGIBM_EXTENT, "logibm")) { + printk(KERN_ERR "logibm.c: Can't allocate ports at %#x\n", LOGIBM_BASE); + return -EBUSY; + } + + outb(LOGIBM_CONFIG_BYTE, LOGIBM_CONFIG_PORT); + outb(LOGIBM_SIGNATURE_BYTE, LOGIBM_SIGNATURE_PORT); + udelay(100); + + if (inb(LOGIBM_SIGNATURE_PORT) != LOGIBM_SIGNATURE_BYTE) { + printk(KERN_INFO "logibm.c: Didn't find Logitech busmouse at %#x\n", LOGIBM_BASE); + err = -ENODEV; + goto err_release_region; + } + + outb(LOGIBM_DEFAULT_MODE, LOGIBM_CONFIG_PORT); + outb(LOGIBM_DISABLE_IRQ, LOGIBM_CONTROL_PORT); + + logibm_dev = input_allocate_device(); + if (!logibm_dev) { + printk(KERN_ERR "logibm.c: Not enough memory for input device\n"); + err = -ENOMEM; + goto err_release_region; + } + + logibm_dev->name = "Logitech bus mouse"; + logibm_dev->phys = "isa023c/input0"; + logibm_dev->id.bustype = BUS_ISA; + logibm_dev->id.vendor = 0x0003; + logibm_dev->id.product = 0x0001; + logibm_dev->id.version = 0x0100; + + logibm_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); + logibm_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | + BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); + logibm_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); + + logibm_dev->open = logibm_open; + logibm_dev->close = logibm_close; + + err = input_register_device(logibm_dev); + if (err) + goto err_free_dev; + + return 0; + + err_free_dev: + input_free_device(logibm_dev); + err_release_region: + release_region(LOGIBM_BASE, LOGIBM_EXTENT); + + return err; +} + +static void __exit logibm_exit(void) +{ + input_unregister_device(logibm_dev); + release_region(LOGIBM_BASE, LOGIBM_EXTENT); +} + +module_init(logibm_init); +module_exit(logibm_exit); -- cgit v1.2.3