From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/rmi4/rmi_spi.c | 533 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 533 insertions(+) create mode 100644 drivers/input/rmi4/rmi_spi.c (limited to 'drivers/input/rmi4/rmi_spi.c') diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c new file mode 100644 index 000000000..c82edda66 --- /dev/null +++ b/drivers/input/rmi4/rmi_spi.c @@ -0,0 +1,533 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011-2016 Synaptics Incorporated + * Copyright (c) 2011 Unixphere + */ + +#include +#include +#include +#include +#include +#include +#include "rmi_driver.h" + +#define RMI_SPI_DEFAULT_XFER_BUF_SIZE 64 + +#define RMI_PAGE_SELECT_REGISTER 0x00FF +#define RMI_SPI_PAGE(addr) (((addr) >> 8) & 0x80) +#define RMI_SPI_XFER_SIZE_LIMIT 255 + +#define BUFFER_SIZE_INCREMENT 32 + +enum rmi_spi_op { + RMI_SPI_WRITE = 0, + RMI_SPI_READ, + RMI_SPI_V2_READ_UNIFIED, + RMI_SPI_V2_READ_SPLIT, + RMI_SPI_V2_WRITE, +}; + +struct rmi_spi_cmd { + enum rmi_spi_op op; + u16 addr; +}; + +struct rmi_spi_xport { + struct rmi_transport_dev xport; + struct spi_device *spi; + + struct mutex page_mutex; + int page; + + u8 *rx_buf; + u8 *tx_buf; + int xfer_buf_size; + + struct spi_transfer *rx_xfers; + struct spi_transfer *tx_xfers; + int rx_xfer_count; + int tx_xfer_count; +}; + +static int rmi_spi_manage_pools(struct rmi_spi_xport *rmi_spi, int len) +{ + struct spi_device *spi = rmi_spi->spi; + int buf_size = rmi_spi->xfer_buf_size + ? rmi_spi->xfer_buf_size : RMI_SPI_DEFAULT_XFER_BUF_SIZE; + struct spi_transfer *xfer_buf; + void *buf; + void *tmp; + + while (buf_size < len) + buf_size *= 2; + + if (buf_size > RMI_SPI_XFER_SIZE_LIMIT) + buf_size = RMI_SPI_XFER_SIZE_LIMIT; + + tmp = rmi_spi->rx_buf; + buf = devm_kcalloc(&spi->dev, buf_size, 2, + GFP_KERNEL | GFP_DMA); + if (!buf) + return -ENOMEM; + + rmi_spi->rx_buf = buf; + rmi_spi->tx_buf = &rmi_spi->rx_buf[buf_size]; + rmi_spi->xfer_buf_size = buf_size; + + if (tmp) + devm_kfree(&spi->dev, tmp); + + if (rmi_spi->xport.pdata.spi_data.read_delay_us) + rmi_spi->rx_xfer_count = buf_size; + else + rmi_spi->rx_xfer_count = 1; + + if (rmi_spi->xport.pdata.spi_data.write_delay_us) + rmi_spi->tx_xfer_count = buf_size; + else + rmi_spi->tx_xfer_count = 1; + + /* + * Allocate a pool of spi_transfer buffers for devices which need + * per byte delays. + */ + tmp = rmi_spi->rx_xfers; + xfer_buf = devm_kcalloc(&spi->dev, + rmi_spi->rx_xfer_count + rmi_spi->tx_xfer_count, + sizeof(struct spi_transfer), + GFP_KERNEL); + if (!xfer_buf) + return -ENOMEM; + + rmi_spi->rx_xfers = xfer_buf; + rmi_spi->tx_xfers = &xfer_buf[rmi_spi->rx_xfer_count]; + + if (tmp) + devm_kfree(&spi->dev, tmp); + + return 0; +} + +static int rmi_spi_xfer(struct rmi_spi_xport *rmi_spi, + const struct rmi_spi_cmd *cmd, const u8 *tx_buf, + int tx_len, u8 *rx_buf, int rx_len) +{ + struct spi_device *spi = rmi_spi->spi; + struct rmi_device_platform_data_spi *spi_data = + &rmi_spi->xport.pdata.spi_data; + struct spi_message msg; + struct spi_transfer *xfer; + int ret = 0; + int len; + int cmd_len = 0; + int total_tx_len; + int i; + u16 addr = cmd->addr; + + spi_message_init(&msg); + + switch (cmd->op) { + case RMI_SPI_WRITE: + case RMI_SPI_READ: + cmd_len += 2; + break; + case RMI_SPI_V2_READ_UNIFIED: + case RMI_SPI_V2_READ_SPLIT: + case RMI_SPI_V2_WRITE: + cmd_len += 4; + break; + } + + total_tx_len = cmd_len + tx_len; + len = max(total_tx_len, rx_len); + + if (len > RMI_SPI_XFER_SIZE_LIMIT) + return -EINVAL; + + if (rmi_spi->xfer_buf_size < len) { + ret = rmi_spi_manage_pools(rmi_spi, len); + if (ret < 0) + return ret; + } + + if (addr == 0) + /* + * SPI needs an address. Use 0x7FF if we want to keep + * reading from the last position of the register pointer. + */ + addr = 0x7FF; + + switch (cmd->op) { + case RMI_SPI_WRITE: + rmi_spi->tx_buf[0] = (addr >> 8); + rmi_spi->tx_buf[1] = addr & 0xFF; + break; + case RMI_SPI_READ: + rmi_spi->tx_buf[0] = (addr >> 8) | 0x80; + rmi_spi->tx_buf[1] = addr & 0xFF; + break; + case RMI_SPI_V2_READ_UNIFIED: + break; + case RMI_SPI_V2_READ_SPLIT: + break; + case RMI_SPI_V2_WRITE: + rmi_spi->tx_buf[0] = 0x40; + rmi_spi->tx_buf[1] = (addr >> 8) & 0xFF; + rmi_spi->tx_buf[2] = addr & 0xFF; + rmi_spi->tx_buf[3] = tx_len; + break; + } + + if (tx_buf) + memcpy(&rmi_spi->tx_buf[cmd_len], tx_buf, tx_len); + + if (rmi_spi->tx_xfer_count > 1) { + for (i = 0; i < total_tx_len; i++) { + xfer = &rmi_spi->tx_xfers[i]; + memset(xfer, 0, sizeof(struct spi_transfer)); + xfer->tx_buf = &rmi_spi->tx_buf[i]; + xfer->len = 1; + xfer->delay.value = spi_data->write_delay_us; + xfer->delay.unit = SPI_DELAY_UNIT_USECS; + spi_message_add_tail(xfer, &msg); + } + } else { + xfer = rmi_spi->tx_xfers; + memset(xfer, 0, sizeof(struct spi_transfer)); + xfer->tx_buf = rmi_spi->tx_buf; + xfer->len = total_tx_len; + spi_message_add_tail(xfer, &msg); + } + + rmi_dbg(RMI_DEBUG_XPORT, &spi->dev, "%s: cmd: %s tx_buf len: %d tx_buf: %*ph\n", + __func__, cmd->op == RMI_SPI_WRITE ? "WRITE" : "READ", + total_tx_len, total_tx_len, rmi_spi->tx_buf); + + if (rx_buf) { + if (rmi_spi->rx_xfer_count > 1) { + for (i = 0; i < rx_len; i++) { + xfer = &rmi_spi->rx_xfers[i]; + memset(xfer, 0, sizeof(struct spi_transfer)); + xfer->rx_buf = &rmi_spi->rx_buf[i]; + xfer->len = 1; + xfer->delay.value = spi_data->read_delay_us; + xfer->delay.unit = SPI_DELAY_UNIT_USECS; + spi_message_add_tail(xfer, &msg); + } + } else { + xfer = rmi_spi->rx_xfers; + memset(xfer, 0, sizeof(struct spi_transfer)); + xfer->rx_buf = rmi_spi->rx_buf; + xfer->len = rx_len; + spi_message_add_tail(xfer, &msg); + } + } + + ret = spi_sync(spi, &msg); + if (ret < 0) { + dev_err(&spi->dev, "spi xfer failed: %d\n", ret); + return ret; + } + + if (rx_buf) { + memcpy(rx_buf, rmi_spi->rx_buf, rx_len); + rmi_dbg(RMI_DEBUG_XPORT, &spi->dev, "%s: (%d) %*ph\n", + __func__, rx_len, rx_len, rx_buf); + } + + return 0; +} + +/* + * rmi_set_page - Set RMI page + * @xport: The pointer to the rmi_transport_dev struct + * @page: The new page address. + * + * RMI devices have 16-bit addressing, but some of the transport + * implementations (like SMBus) only have 8-bit addressing. So RMI implements + * a page address at 0xff of every page so we can reliable page addresses + * every 256 registers. + * + * The page_mutex lock must be held when this function is entered. + * + * Returns zero on success, non-zero on failure. + */ +static int rmi_set_page(struct rmi_spi_xport *rmi_spi, u8 page) +{ + struct rmi_spi_cmd cmd; + int ret; + + cmd.op = RMI_SPI_WRITE; + cmd.addr = RMI_PAGE_SELECT_REGISTER; + + ret = rmi_spi_xfer(rmi_spi, &cmd, &page, 1, NULL, 0); + + if (ret) + rmi_spi->page = page; + + return ret; +} + +static int rmi_spi_write_block(struct rmi_transport_dev *xport, u16 addr, + const void *buf, size_t len) +{ + struct rmi_spi_xport *rmi_spi = + container_of(xport, struct rmi_spi_xport, xport); + struct rmi_spi_cmd cmd; + int ret; + + mutex_lock(&rmi_spi->page_mutex); + + if (RMI_SPI_PAGE(addr) != rmi_spi->page) { + ret = rmi_set_page(rmi_spi, RMI_SPI_PAGE(addr)); + if (ret) + goto exit; + } + + cmd.op = RMI_SPI_WRITE; + cmd.addr = addr; + + ret = rmi_spi_xfer(rmi_spi, &cmd, buf, len, NULL, 0); + +exit: + mutex_unlock(&rmi_spi->page_mutex); + return ret; +} + +static int rmi_spi_read_block(struct rmi_transport_dev *xport, u16 addr, + void *buf, size_t len) +{ + struct rmi_spi_xport *rmi_spi = + container_of(xport, struct rmi_spi_xport, xport); + struct rmi_spi_cmd cmd; + int ret; + + mutex_lock(&rmi_spi->page_mutex); + + if (RMI_SPI_PAGE(addr) != rmi_spi->page) { + ret = rmi_set_page(rmi_spi, RMI_SPI_PAGE(addr)); + if (ret) + goto exit; + } + + cmd.op = RMI_SPI_READ; + cmd.addr = addr; + + ret = rmi_spi_xfer(rmi_spi, &cmd, NULL, 0, buf, len); + +exit: + mutex_unlock(&rmi_spi->page_mutex); + return ret; +} + +static const struct rmi_transport_ops rmi_spi_ops = { + .write_block = rmi_spi_write_block, + .read_block = rmi_spi_read_block, +}; + +#ifdef CONFIG_OF +static int rmi_spi_of_probe(struct spi_device *spi, + struct rmi_device_platform_data *pdata) +{ + struct device *dev = &spi->dev; + int retval; + + retval = rmi_of_property_read_u32(dev, + &pdata->spi_data.read_delay_us, + "spi-rx-delay-us", 1); + if (retval) + return retval; + + retval = rmi_of_property_read_u32(dev, + &pdata->spi_data.write_delay_us, + "spi-tx-delay-us", 1); + if (retval) + return retval; + + return 0; +} + +static const struct of_device_id rmi_spi_of_match[] = { + { .compatible = "syna,rmi4-spi" }, + {}, +}; +MODULE_DEVICE_TABLE(of, rmi_spi_of_match); +#else +static inline int rmi_spi_of_probe(struct spi_device *spi, + struct rmi_device_platform_data *pdata) +{ + return -ENODEV; +} +#endif + +static void rmi_spi_unregister_transport(void *data) +{ + struct rmi_spi_xport *rmi_spi = data; + + rmi_unregister_transport_device(&rmi_spi->xport); +} + +static int rmi_spi_probe(struct spi_device *spi) +{ + struct rmi_spi_xport *rmi_spi; + struct rmi_device_platform_data *pdata; + struct rmi_device_platform_data *spi_pdata = spi->dev.platform_data; + int error; + + if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) + return -EINVAL; + + rmi_spi = devm_kzalloc(&spi->dev, sizeof(struct rmi_spi_xport), + GFP_KERNEL); + if (!rmi_spi) + return -ENOMEM; + + pdata = &rmi_spi->xport.pdata; + + if (spi->dev.of_node) { + error = rmi_spi_of_probe(spi, pdata); + if (error) + return error; + } else if (spi_pdata) { + *pdata = *spi_pdata; + } + + if (pdata->spi_data.bits_per_word) + spi->bits_per_word = pdata->spi_data.bits_per_word; + + if (pdata->spi_data.mode) + spi->mode = pdata->spi_data.mode; + + error = spi_setup(spi); + if (error < 0) { + dev_err(&spi->dev, "spi_setup failed!\n"); + return error; + } + + pdata->irq = spi->irq; + + rmi_spi->spi = spi; + mutex_init(&rmi_spi->page_mutex); + + rmi_spi->xport.dev = &spi->dev; + rmi_spi->xport.proto_name = "spi"; + rmi_spi->xport.ops = &rmi_spi_ops; + + spi_set_drvdata(spi, rmi_spi); + + error = rmi_spi_manage_pools(rmi_spi, RMI_SPI_DEFAULT_XFER_BUF_SIZE); + if (error) + return error; + + /* + * Setting the page to zero will (a) make sure the PSR is in a + * known state, and (b) make sure we can talk to the device. + */ + error = rmi_set_page(rmi_spi, 0); + if (error) { + dev_err(&spi->dev, "Failed to set page select to 0.\n"); + return error; + } + + dev_info(&spi->dev, "registering SPI-connected sensor\n"); + + error = rmi_register_transport_device(&rmi_spi->xport); + if (error) { + dev_err(&spi->dev, "failed to register sensor: %d\n", error); + return error; + } + + error = devm_add_action_or_reset(&spi->dev, + rmi_spi_unregister_transport, + rmi_spi); + if (error) + return error; + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int rmi_spi_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi); + int ret; + + ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev, true); + if (ret) + dev_warn(dev, "Failed to resume device: %d\n", ret); + + return ret; +} + +static int rmi_spi_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi); + int ret; + + ret = rmi_driver_resume(rmi_spi->xport.rmi_dev, true); + if (ret) + dev_warn(dev, "Failed to resume device: %d\n", ret); + + return ret; +} +#endif + +#ifdef CONFIG_PM +static int rmi_spi_runtime_suspend(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi); + int ret; + + ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev, false); + if (ret) + dev_warn(dev, "Failed to resume device: %d\n", ret); + + return 0; +} + +static int rmi_spi_runtime_resume(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi); + int ret; + + ret = rmi_driver_resume(rmi_spi->xport.rmi_dev, false); + if (ret) + dev_warn(dev, "Failed to resume device: %d\n", ret); + + return 0; +} +#endif + +static const struct dev_pm_ops rmi_spi_pm = { + SET_SYSTEM_SLEEP_PM_OPS(rmi_spi_suspend, rmi_spi_resume) + SET_RUNTIME_PM_OPS(rmi_spi_runtime_suspend, rmi_spi_runtime_resume, + NULL) +}; + +static const struct spi_device_id rmi_id[] = { + { "rmi4_spi", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, rmi_id); + +static struct spi_driver rmi_spi_driver = { + .driver = { + .name = "rmi4_spi", + .pm = &rmi_spi_pm, + .of_match_table = of_match_ptr(rmi_spi_of_match), + }, + .id_table = rmi_id, + .probe = rmi_spi_probe, +}; + +module_spi_driver(rmi_spi_driver); + +MODULE_AUTHOR("Christopher Heiny "); +MODULE_AUTHOR("Andrew Duggan "); +MODULE_DESCRIPTION("RMI SPI driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3