From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/serio/i8042-acpipnpio.h | 1681 +++++++++++++++++++++++++++++++++ 1 file changed, 1681 insertions(+) create mode 100644 drivers/input/serio/i8042-acpipnpio.h (limited to 'drivers/input/serio/i8042-acpipnpio.h') diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h new file mode 100644 index 000000000..efc617360 --- /dev/null +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -0,0 +1,1681 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _I8042_ACPIPNPIO_H +#define _I8042_ACPIPNPIO_H + +#include + +#ifdef CONFIG_X86 +#include +#endif + +/* + * Names. + */ + +#define I8042_KBD_PHYS_DESC "isa0060/serio0" +#define I8042_AUX_PHYS_DESC "isa0060/serio1" +#define I8042_MUX_PHYS_DESC "isa0060/serio%d" + +/* + * IRQs. + */ + +#if defined(__ia64__) +# define I8042_MAP_IRQ(x) isa_irq_to_vector((x)) +#else +# define I8042_MAP_IRQ(x) (x) +#endif + +#define I8042_KBD_IRQ i8042_kbd_irq +#define I8042_AUX_IRQ i8042_aux_irq + +static int i8042_kbd_irq; +static int i8042_aux_irq; + +/* + * Register numbers. + */ + +#define I8042_COMMAND_REG i8042_command_reg +#define I8042_STATUS_REG i8042_command_reg +#define I8042_DATA_REG i8042_data_reg + +static int i8042_command_reg = 0x64; +static int i8042_data_reg = 0x60; + + +static inline int i8042_read_data(void) +{ + return inb(I8042_DATA_REG); +} + +static inline int i8042_read_status(void) +{ + return inb(I8042_STATUS_REG); +} + +static inline void i8042_write_data(int val) +{ + outb(val, I8042_DATA_REG); +} + +static inline void i8042_write_command(int val) +{ + outb(val, I8042_COMMAND_REG); +} + +#ifdef CONFIG_X86 + +#include + +#define SERIO_QUIRK_NOKBD BIT(0) +#define SERIO_QUIRK_NOAUX BIT(1) +#define SERIO_QUIRK_NOMUX BIT(2) +#define SERIO_QUIRK_FORCEMUX BIT(3) +#define SERIO_QUIRK_UNLOCK BIT(4) +#define SERIO_QUIRK_PROBE_DEFER BIT(5) +#define SERIO_QUIRK_RESET_ALWAYS BIT(6) +#define SERIO_QUIRK_RESET_NEVER BIT(7) +#define SERIO_QUIRK_DIECT BIT(8) +#define SERIO_QUIRK_DUMBKBD BIT(9) +#define SERIO_QUIRK_NOLOOP BIT(10) +#define SERIO_QUIRK_NOTIMEOUT BIT(11) +#define SERIO_QUIRK_KBDRESET BIT(12) +#define SERIO_QUIRK_DRITEK BIT(13) +#define SERIO_QUIRK_NOPNP BIT(14) + +/* Quirk table for different mainboards. Options similar or identical to i8042 + * module parameters. + * ORDERING IS IMPORTANT! The first match will be apllied and the rest ignored. + * This allows entries to overwrite vendor wide quirks on a per device basis. + * Where this is irrelevant, entries are sorted case sensitive by DMI_SYS_VENDOR + * and/or DMI_BOARD_VENDOR to make it easier to avoid dublicate entries. + */ +static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X750LN"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Asus X450LCP */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_NEVER) + }, + { + /* ASUS ZenBook UX425UA/QA */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX425"), + }, + .driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER) + }, + { + /* ASUS ZenBook UM325UA/QA */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325"), + }, + .driver_data = (void *)(SERIO_QUIRK_PROBE_DEFER | SERIO_QUIRK_RESET_NEVER) + }, + /* + * On some Asus laptops, just running self tests cause problems. + */ + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_NEVER) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_CHASSIS_TYPE, "31"), /* Convertible Notebook */ + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_NEVER) + }, + { + /* ASUS P65UP5 - AUX LOOP command does not raise AUX IRQ */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"), + DMI_MATCH(DMI_BOARD_VERSION, "REV 2.X"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* ASUS G1S */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_BOARD_NAME, "G1S"), + DMI_MATCH(DMI_BOARD_VERSION, "1.0"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Acer Aspire 5710 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Acer Aspire 7738 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7738"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Acer Aspire 5536 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"), + DMI_MATCH(DMI_PRODUCT_VERSION, "0100"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* + * Acer Aspire 5738z + * Touchpad stops working in mux mode when dis- + re-enabled + * with the touchpad enable/disable toggle hotkey + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Acer Aspire One 150 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Acer Aspire One 532h */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AO532h"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A114-31"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A314-31"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A315-31"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-132"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-332"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-432"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate Spin B118-RN"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + /* + * Some Wistron based laptops need us to explicitly enable the 'Dritek + * keyboard extension' to make their extra keys start generating scancodes. + * Originally, this was just confined to older laptops, but a few Acer laptops + * have turned up in 2007 that also need this again. + */ + { + /* Acer Aspire 5100 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer Aspire 5610 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer Aspire 5630 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer Aspire 5650 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer Aspire 5680 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer Aspire 5720 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer Aspire 9110 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer TravelMate 660 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer TravelMate 2490 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Acer TravelMate 4280 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"), + }, + .driver_data = (void *)(SERIO_QUIRK_DRITEK) + }, + { + /* Amoi M636/A737 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ByteSpeed LLC"), + DMI_MATCH(DMI_PRODUCT_NAME, "ByteSpeed Laptop C15B"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Compal HEL80I */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"), + DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant"), + DMI_MATCH(DMI_PRODUCT_VERSION, "8500"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant"), + DMI_MATCH(DMI_PRODUCT_VERSION, "DL760"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Advent 4211 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"), + DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Dell Embedded Box PC 3000 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Embedded Box PC 3000"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Dell XPS M1530 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Dell Vostro 1510 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Dell Vostro V13 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_NOTIMEOUT) + }, + { + /* Dell Vostro 1320 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Dell Vostro 1520 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Dell Vostro 1720 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Entroware Proteus */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Entroware"), + DMI_MATCH(DMI_PRODUCT_NAME, "Proteus"), + DMI_MATCH(DMI_PRODUCT_VERSION, "EL07R4"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS) + }, + /* + * Some Fujitsu notebooks are having trouble with touchpads if + * active multiplexing mode is activated. Luckily they don't have + * external PS/2 ports so we can safely disable it. + * ... apparently some Toshibas don't like MUX mode either and + * die horrible death on reboot. + */ + { + /* Fujitsu Lifebook P7010/P7010D */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "P7010"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu Lifebook P5020D */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu Lifebook S2000 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu Lifebook S6230 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu Lifebook T725 laptop */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T725"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_NOTIMEOUT) + }, + { + /* Fujitsu Lifebook U745 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U745"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu T70H */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu A544 laptop */ + /* https://bugzilla.redhat.com/show_bug.cgi?id=1111138 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK A544"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT) + }, + { + /* Fujitsu AH544 laptop */ + /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK AH544"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT) + }, + { + /* Fujitsu U574 laptop */ + /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT) + }, + { + /* Fujitsu UH554 laptop */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK UH544"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOTIMEOUT) + }, + { + /* Fujitsu Lifebook P7010 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu-Siemens Lifebook T3010 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu-Siemens Lifebook E4010 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu-Siemens Amilo Pro 2010 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Fujitsu-Siemens Amilo Pro 2030 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Gigabyte M912 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "M912"), + DMI_MATCH(DMI_PRODUCT_VERSION, "01"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Gigabyte Spring Peak - defines wrong chassis type */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Gigabyte T1005 - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Gigabyte T1005M/P - defines wrong chassis type ("Other") */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + /* + * Some laptops need keyboard reset before probing for the trackpad to get + * it detected, initialised & finally work. + */ + { + /* Gigabyte P35 v2 - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "P35V2"), + }, + .driver_data = (void *)(SERIO_QUIRK_KBDRESET) + }, + { + /* Aorus branded Gigabyte X3 Plus - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "X3"), + }, + .driver_data = (void *)(SERIO_QUIRK_KBDRESET) + }, + { + /* Gigabyte P34 - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "P34"), + }, + .driver_data = (void *)(SERIO_QUIRK_KBDRESET) + }, + { + /* Gigabyte P57 - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "P57"), + }, + .driver_data = (void *)(SERIO_QUIRK_KBDRESET) + }, + { + /* Gericom Bellagio */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Gericom"), + DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Gigabyte M1022M netbook */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co.,Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "M1022E"), + DMI_MATCH(DMI_BOARD_VERSION, "1.02"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Rev 1"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* + * HP Pavilion DV4017EA - + * errors on MUX ports are reported without raising AUXDATA + * causing "spurious NAK" messages. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* + * HP Pavilion ZT1000 - + * like DV4017EA does not raise AUXERR for errors on MUX ports. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"), + DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook ZT1000"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* + * HP Pavilion DV4270ca - + * like DV4017EA does not raise AUXERR for errors on MUX ports. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Newer HP Pavilion dv4 models */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_NOTIMEOUT) + }, + { + /* IBM 2656 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IBM"), + DMI_MATCH(DMI_PRODUCT_NAME, "2656"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Avatar AVIU-145A6 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel"), + DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Intel MBO Desktop D845PESV */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "D845PESV"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOPNP) + }, + { + /* + * Intel NUC D54250WYK - does not have i8042 controller but + * declares PS/2 devices in DSDT. + */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "D54250WYK"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOPNP) + }, + { + /* Lenovo 3000 n100 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "076804U"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Lenovo XiaoXin Air 12 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "80UN"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Lenovo LaVie Z */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Lenovo Ideapad U455 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "20046"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Lenovo ThinkPad L460 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L460"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Lenovo ThinkPad Twist S230u */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* LG Electronics X110 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), + DMI_MATCH(DMI_BOARD_NAME, "X110"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Medion Akoya Mini E1210 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E1210"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* Medion Akoya E1222 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MEDION"), + DMI_MATCH(DMI_PRODUCT_NAME, "E122X"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + { + /* MSI Wind U-100 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOPNP) + }, + { + /* + * No data is coming from the touchscreen unless KBC + * is in legacy mode. + */ + /* Panasonic CF-29 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"), + DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Medion Akoya E7225 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Medion"), + DMI_MATCH(DMI_PRODUCT_NAME, "Akoya E7225"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Microsoft Virtual Machine */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"), + DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Medion MAM 2070 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Notebook"), + DMI_MATCH(DMI_PRODUCT_NAME, "MAM 2070"), + DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* TUXEDO BU1406 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Notebook"), + DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* OQO Model 01 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "OQO"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "00"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "PEGATRON CORPORATION"), + DMI_MATCH(DMI_PRODUCT_NAME, "C15B"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Acer Aspire 5 A515 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "PK"), + DMI_MATCH(DMI_BOARD_NAME, "Grumpy_PK"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOPNP) + }, + { + /* ULI EV4873 - AUX LOOP does not work properly */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ULI"), + DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"), + DMI_MATCH(DMI_PRODUCT_VERSION, "5a"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* + * Arima-Rioworks HDAMB - + * AUX LOOP command does not raise AUX IRQ + */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "RIOWORKS"), + DMI_MATCH(DMI_BOARD_NAME, "HDAMB"), + DMI_MATCH(DMI_BOARD_VERSION, "Rev E"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + { + /* Sharp Actius MM20 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SHARP"), + DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* + * Sony Vaio FZ-240E - + * reset and GET ID commands issued via KBD port are + * sometimes being delivered to AUX3. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* + * Most (all?) VAIOs do not have external PS/2 ports nor + * they implement active multiplexing properly, and + * MUX discovery usually messes up keyboard/touchpad. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "VAIO"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* Sony Vaio FS-115b */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + /* + * Sony Vaio VGN-CS series require MUX or the touch sensor + * buttons will disturb touchpad operation + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-CS"), + }, + .driver_data = (void *)(SERIO_QUIRK_FORCEMUX) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, + /* + * A lot of modern Clevo barebones have touchpad and/or keyboard issues + * after suspend fixable with nomux + reset + noloop + nopnp. Luckily, + * none of them have an external PS/2 port so this can safely be set for + * all of them. These two are based on a Clevo design, but have the + * board_name changed. + */ + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"), + DMI_MATCH(DMI_BOARD_NAME, "AURA1501"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"), + DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* Mivvy M310 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"), + DMI_MATCH(DMI_PRODUCT_NAME, "N10"), + }, + .driver_data = (void *)(SERIO_QUIRK_RESET_ALWAYS) + }, + /* + * Some laptops need keyboard reset before probing for the trackpad to get + * it detected, initialised & finally work. + */ + { + /* Schenker XMG C504 - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "XMG"), + DMI_MATCH(DMI_PRODUCT_NAME, "C504"), + }, + .driver_data = (void *)(SERIO_QUIRK_KBDRESET) + }, + { + /* Blue FB5601 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "blue"), + DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"), + DMI_MATCH(DMI_PRODUCT_VERSION, "M606"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOLOOP) + }, + /* + * A lot of modern Clevo barebones have touchpad and/or keyboard issues + * after suspend fixable with nomux + reset + noloop + nopnp. Luckily, + * none of them have an external PS/2 port so this can safely be set for + * all of them. + * Clevo barebones come with board_vendor and/or system_vendor set to + * either the very generic string "Notebook" and/or a different value + * for each individual reseller. The only somewhat universal way to + * identify them is by board_name. + */ + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "LAPQC71B"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "N140CU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "N141CU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + /* + * At least one modern Clevo barebone has the touchpad connected both + * via PS/2 and i2c interface. This causes a race condition between the + * psmouse and i2c-hid driver. Since the full capability of the touchpad + * is available via the i2c interface and the device has no external + * PS/2 port, it is safe to just ignore all ps2 mouses here to avoid + * this issue. The known affected device is the + * TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU which comes with one of + * the two different dmi strings below. NS50MU is not a typo! + */ + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "NS50MU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX | + SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | + SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX | + SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | + SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "NJ50_70CU"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* + * This is only a partial board_name and might be followed by + * another letter or number. DMI_MATCH however does do partial + * matching. + */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "P65xH"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* Clevo P650RS, 650RP6, Sager NP8152-S, and others */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* + * This is only a partial board_name and might be followed by + * another letter or number. DMI_MATCH however does do partial + * matching. + */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "P65_P67H"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* + * This is only a partial board_name and might be followed by + * another letter or number. DMI_MATCH however does do partial + * matching. + */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RP"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* + * This is only a partial board_name and might be followed by + * another letter or number. DMI_MATCH however does do partial + * matching. + */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RS"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + /* + * This is only a partial board_name and might be followed by + * another letter or number. DMI_MATCH however does do partial + * matching. + */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "P67xRP"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "X170SM"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | + SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) + }, + { } +}; + +#ifdef CONFIG_PNP +static const struct dmi_system_id i8042_dmi_laptop_table[] __initconst = { + { + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */ + }, + }, + { + .matches = { + DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */ + }, + }, + { } +}; +#endif + +#endif /* CONFIG_X86 */ + +#ifdef CONFIG_PNP +#include + +static bool i8042_pnp_kbd_registered; +static unsigned int i8042_pnp_kbd_devices; +static bool i8042_pnp_aux_registered; +static unsigned int i8042_pnp_aux_devices; + +static int i8042_pnp_command_reg; +static int i8042_pnp_data_reg; +static int i8042_pnp_kbd_irq; +static int i8042_pnp_aux_irq; + +static char i8042_pnp_kbd_name[32]; +static char i8042_pnp_aux_name[32]; + +static void i8042_pnp_id_to_string(struct pnp_id *id, char *dst, int dst_size) +{ + strscpy(dst, "PNP:", dst_size); + + while (id) { + strlcat(dst, " ", dst_size); + strlcat(dst, id->id, dst_size); + id = id->next; + } +} + +static int i8042_pnp_kbd_probe(struct pnp_dev *dev, const struct pnp_device_id *did) +{ + if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1) + i8042_pnp_data_reg = pnp_port_start(dev,0); + + if (pnp_port_valid(dev, 1) && pnp_port_len(dev, 1) == 1) + i8042_pnp_command_reg = pnp_port_start(dev, 1); + + if (pnp_irq_valid(dev,0)) + i8042_pnp_kbd_irq = pnp_irq(dev, 0); + + strscpy(i8042_pnp_kbd_name, did->id, sizeof(i8042_pnp_kbd_name)); + if (strlen(pnp_dev_name(dev))) { + strlcat(i8042_pnp_kbd_name, ":", sizeof(i8042_pnp_kbd_name)); + strlcat(i8042_pnp_kbd_name, pnp_dev_name(dev), sizeof(i8042_pnp_kbd_name)); + } + i8042_pnp_id_to_string(dev->id, i8042_kbd_firmware_id, + sizeof(i8042_kbd_firmware_id)); + i8042_kbd_fwnode = dev_fwnode(&dev->dev); + + /* Keyboard ports are always supposed to be wakeup-enabled */ + device_set_wakeup_enable(&dev->dev, true); + + i8042_pnp_kbd_devices++; + return 0; +} + +static int i8042_pnp_aux_probe(struct pnp_dev *dev, const struct pnp_device_id *did) +{ + if (pnp_port_valid(dev, 0) && pnp_port_len(dev, 0) == 1) + i8042_pnp_data_reg = pnp_port_start(dev,0); + + if (pnp_port_valid(dev, 1) && pnp_port_len(dev, 1) == 1) + i8042_pnp_command_reg = pnp_port_start(dev, 1); + + if (pnp_irq_valid(dev, 0)) + i8042_pnp_aux_irq = pnp_irq(dev, 0); + + strscpy(i8042_pnp_aux_name, did->id, sizeof(i8042_pnp_aux_name)); + if (strlen(pnp_dev_name(dev))) { + strlcat(i8042_pnp_aux_name, ":", sizeof(i8042_pnp_aux_name)); + strlcat(i8042_pnp_aux_name, pnp_dev_name(dev), sizeof(i8042_pnp_aux_name)); + } + i8042_pnp_id_to_string(dev->id, i8042_aux_firmware_id, + sizeof(i8042_aux_firmware_id)); + + i8042_pnp_aux_devices++; + return 0; +} + +static const struct pnp_device_id pnp_kbd_devids[] = { + { .id = "PNP0300", .driver_data = 0 }, + { .id = "PNP0301", .driver_data = 0 }, + { .id = "PNP0302", .driver_data = 0 }, + { .id = "PNP0303", .driver_data = 0 }, + { .id = "PNP0304", .driver_data = 0 }, + { .id = "PNP0305", .driver_data = 0 }, + { .id = "PNP0306", .driver_data = 0 }, + { .id = "PNP0309", .driver_data = 0 }, + { .id = "PNP030a", .driver_data = 0 }, + { .id = "PNP030b", .driver_data = 0 }, + { .id = "PNP0320", .driver_data = 0 }, + { .id = "PNP0343", .driver_data = 0 }, + { .id = "PNP0344", .driver_data = 0 }, + { .id = "PNP0345", .driver_data = 0 }, + { .id = "CPQA0D7", .driver_data = 0 }, + { .id = "", }, +}; +MODULE_DEVICE_TABLE(pnp, pnp_kbd_devids); + +static struct pnp_driver i8042_pnp_kbd_driver = { + .name = "i8042 kbd", + .id_table = pnp_kbd_devids, + .probe = i8042_pnp_kbd_probe, + .driver = { + .probe_type = PROBE_FORCE_SYNCHRONOUS, + .suppress_bind_attrs = true, + }, +}; + +static const struct pnp_device_id pnp_aux_devids[] = { + { .id = "AUI0200", .driver_data = 0 }, + { .id = "FJC6000", .driver_data = 0 }, + { .id = "FJC6001", .driver_data = 0 }, + { .id = "PNP0f03", .driver_data = 0 }, + { .id = "PNP0f0b", .driver_data = 0 }, + { .id = "PNP0f0e", .driver_data = 0 }, + { .id = "PNP0f12", .driver_data = 0 }, + { .id = "PNP0f13", .driver_data = 0 }, + { .id = "PNP0f19", .driver_data = 0 }, + { .id = "PNP0f1c", .driver_data = 0 }, + { .id = "SYN0801", .driver_data = 0 }, + { .id = "", }, +}; +MODULE_DEVICE_TABLE(pnp, pnp_aux_devids); + +static struct pnp_driver i8042_pnp_aux_driver = { + .name = "i8042 aux", + .id_table = pnp_aux_devids, + .probe = i8042_pnp_aux_probe, + .driver = { + .probe_type = PROBE_FORCE_SYNCHRONOUS, + .suppress_bind_attrs = true, + }, +}; + +static void i8042_pnp_exit(void) +{ + if (i8042_pnp_kbd_registered) { + i8042_pnp_kbd_registered = false; + pnp_unregister_driver(&i8042_pnp_kbd_driver); + } + + if (i8042_pnp_aux_registered) { + i8042_pnp_aux_registered = false; + pnp_unregister_driver(&i8042_pnp_aux_driver); + } +} + +static int __init i8042_pnp_init(void) +{ + char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 }; + bool pnp_data_busted = false; + int err; + + if (i8042_nopnp) { + pr_info("PNP detection disabled\n"); + return 0; + } + + err = pnp_register_driver(&i8042_pnp_kbd_driver); + if (!err) + i8042_pnp_kbd_registered = true; + + err = pnp_register_driver(&i8042_pnp_aux_driver); + if (!err) + i8042_pnp_aux_registered = true; + + if (!i8042_pnp_kbd_devices && !i8042_pnp_aux_devices) { + i8042_pnp_exit(); +#if defined(__ia64__) + return -ENODEV; +#else + pr_info("PNP: No PS/2 controller found.\n"); +#if defined(__loongarch__) + if (acpi_disabled == 0) + return -ENODEV; +#else + if (x86_platform.legacy.i8042 != + X86_LEGACY_I8042_EXPECTED_PRESENT) + return -ENODEV; +#endif + pr_info("Probing ports directly.\n"); + return 0; +#endif + } + + if (i8042_pnp_kbd_devices) + snprintf(kbd_irq_str, sizeof(kbd_irq_str), + "%d", i8042_pnp_kbd_irq); + if (i8042_pnp_aux_devices) + snprintf(aux_irq_str, sizeof(aux_irq_str), + "%d", i8042_pnp_aux_irq); + + pr_info("PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n", + i8042_pnp_kbd_name, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "", + i8042_pnp_aux_name, + i8042_pnp_data_reg, i8042_pnp_command_reg, + kbd_irq_str, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "", + aux_irq_str); + +#if defined(__ia64__) + if (!i8042_pnp_kbd_devices) + i8042_nokbd = true; + if (!i8042_pnp_aux_devices) + i8042_noaux = true; +#endif + + if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) && + i8042_pnp_data_reg != i8042_data_reg) || + !i8042_pnp_data_reg) { + pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n", + i8042_pnp_data_reg, i8042_data_reg); + i8042_pnp_data_reg = i8042_data_reg; + pnp_data_busted = true; + } + + if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) && + i8042_pnp_command_reg != i8042_command_reg) || + !i8042_pnp_command_reg) { + pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n", + i8042_pnp_command_reg, i8042_command_reg); + i8042_pnp_command_reg = i8042_command_reg; + pnp_data_busted = true; + } + + if (!i8042_nokbd && !i8042_pnp_kbd_irq) { + pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n", + i8042_kbd_irq); + i8042_pnp_kbd_irq = i8042_kbd_irq; + pnp_data_busted = true; + } + + if (!i8042_noaux && !i8042_pnp_aux_irq) { + if (!pnp_data_busted && i8042_pnp_kbd_irq) { + pr_warn("PNP: PS/2 appears to have AUX port disabled, " + "if this is incorrect please boot with i8042.nopnp\n"); + i8042_noaux = true; + } else { + pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n", + i8042_aux_irq); + i8042_pnp_aux_irq = i8042_aux_irq; + } + } + + i8042_data_reg = i8042_pnp_data_reg; + i8042_command_reg = i8042_pnp_command_reg; + i8042_kbd_irq = i8042_pnp_kbd_irq; + i8042_aux_irq = i8042_pnp_aux_irq; + +#ifdef CONFIG_X86 + i8042_bypass_aux_irq_test = !pnp_data_busted && + dmi_check_system(i8042_dmi_laptop_table); +#endif + + return 0; +} + +#else /* !CONFIG_PNP */ +static inline int i8042_pnp_init(void) { return 0; } +static inline void i8042_pnp_exit(void) { } +#endif /* CONFIG_PNP */ + + +#ifdef CONFIG_X86 +static void __init i8042_check_quirks(void) +{ + const struct dmi_system_id *device_quirk_info; + uintptr_t quirks; + + device_quirk_info = dmi_first_match(i8042_dmi_quirk_table); + if (!device_quirk_info) + return; + + quirks = (uintptr_t)device_quirk_info->driver_data; + + if (quirks & SERIO_QUIRK_NOKBD) + i8042_nokbd = true; + if (quirks & SERIO_QUIRK_NOAUX) + i8042_noaux = true; + if (quirks & SERIO_QUIRK_NOMUX) + i8042_nomux = true; + if (quirks & SERIO_QUIRK_FORCEMUX) + i8042_nomux = false; + if (quirks & SERIO_QUIRK_UNLOCK) + i8042_unlock = true; + if (quirks & SERIO_QUIRK_PROBE_DEFER) + i8042_probe_defer = true; + /* Honor module parameter when value is not default */ + if (i8042_reset == I8042_RESET_DEFAULT) { + if (quirks & SERIO_QUIRK_RESET_ALWAYS) + i8042_reset = I8042_RESET_ALWAYS; + if (quirks & SERIO_QUIRK_RESET_NEVER) + i8042_reset = I8042_RESET_NEVER; + } + if (quirks & SERIO_QUIRK_DIECT) + i8042_direct = true; + if (quirks & SERIO_QUIRK_DUMBKBD) + i8042_dumbkbd = true; + if (quirks & SERIO_QUIRK_NOLOOP) + i8042_noloop = true; + if (quirks & SERIO_QUIRK_NOTIMEOUT) + i8042_notimeout = true; + if (quirks & SERIO_QUIRK_KBDRESET) + i8042_kbdreset = true; + if (quirks & SERIO_QUIRK_DRITEK) + i8042_dritek = true; +#ifdef CONFIG_PNP + if (quirks & SERIO_QUIRK_NOPNP) + i8042_nopnp = true; +#endif +} +#else +static inline void i8042_check_quirks(void) {} +#endif + +static int __init i8042_platform_init(void) +{ + int retval; + +#ifdef CONFIG_X86 + u8 a20_on = 0xdf; + /* Just return if platform does not have i8042 controller */ + if (x86_platform.legacy.i8042 == X86_LEGACY_I8042_PLATFORM_ABSENT) + return -ENODEV; +#endif + +/* + * On ix86 platforms touching the i8042 data register region can do really + * bad things. Because of this the region is always reserved on ix86 boxes. + * + * if (!request_region(I8042_DATA_REG, 16, "i8042")) + * return -EBUSY; + */ + + i8042_kbd_irq = I8042_MAP_IRQ(1); + i8042_aux_irq = I8042_MAP_IRQ(12); + +#if defined(__ia64__) + i8042_reset = I8042_RESET_ALWAYS; +#endif + + i8042_check_quirks(); + + pr_debug("Active quirks (empty means none):%s%s%s%s%s%s%s%s%s%s%s%s%s\n", + i8042_nokbd ? " nokbd" : "", + i8042_noaux ? " noaux" : "", + i8042_nomux ? " nomux" : "", + i8042_unlock ? " unlock" : "", + i8042_probe_defer ? "probe_defer" : "", + i8042_reset == I8042_RESET_DEFAULT ? + "" : i8042_reset == I8042_RESET_ALWAYS ? + " reset_always" : " reset_never", + i8042_direct ? " direct" : "", + i8042_dumbkbd ? " dumbkbd" : "", + i8042_noloop ? " noloop" : "", + i8042_notimeout ? " notimeout" : "", + i8042_kbdreset ? " kbdreset" : "", +#ifdef CONFIG_X86 + i8042_dritek ? " dritek" : "", +#else + "", +#endif +#ifdef CONFIG_PNP + i8042_nopnp ? " nopnp" : ""); +#else + ""); +#endif + + retval = i8042_pnp_init(); + if (retval) + return retval; + +#ifdef CONFIG_X86 + /* + * A20 was already enabled during early kernel init. But some buggy + * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to + * resume from S3. So we do it here and hope that nothing breaks. + */ + i8042_command(&a20_on, 0x10d1); + i8042_command(NULL, 0x00ff); /* Null command for SMM firmware */ +#endif /* CONFIG_X86 */ + + return retval; +} + +static inline void i8042_platform_exit(void) +{ + i8042_pnp_exit(); +} + +#endif /* _I8042_ACPIPNPIO_H */ -- cgit v1.2.3