From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/touchscreen/hycon-hy46xx.c | 590 +++++++++++++++++++++++++++++++ 1 file changed, 590 insertions(+) create mode 100644 drivers/input/touchscreen/hycon-hy46xx.c (limited to 'drivers/input/touchscreen/hycon-hy46xx.c') diff --git a/drivers/input/touchscreen/hycon-hy46xx.c b/drivers/input/touchscreen/hycon-hy46xx.c new file mode 100644 index 000000000..8f4989aba --- /dev/null +++ b/drivers/input/touchscreen/hycon-hy46xx.c @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 + * Author(s): Giulio Benetti + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define HY46XX_CHKSUM_CODE 0x1 +#define HY46XX_FINGER_NUM 0x2 +#define HY46XX_CHKSUM_LEN 0x7 +#define HY46XX_THRESHOLD 0x80 +#define HY46XX_GLOVE_EN 0x84 +#define HY46XX_REPORT_SPEED 0x88 +#define HY46XX_PWR_NOISE_EN 0x89 +#define HY46XX_FILTER_DATA 0x8A +#define HY46XX_GAIN 0x92 +#define HY46XX_EDGE_OFFSET 0x93 +#define HY46XX_RX_NR_USED 0x94 +#define HY46XX_TX_NR_USED 0x95 +#define HY46XX_PWR_MODE 0xA5 +#define HY46XX_FW_VERSION 0xA6 +#define HY46XX_LIB_VERSION 0xA7 +#define HY46XX_TP_INFO 0xA8 +#define HY46XX_TP_CHIP_ID 0xA9 +#define HY46XX_BOOT_VER 0xB0 + +#define HY46XX_TPLEN 0x6 +#define HY46XX_REPORT_PKT_LEN 0x44 + +#define HY46XX_MAX_SUPPORTED_POINTS 11 + +#define TOUCH_EVENT_DOWN 0x00 +#define TOUCH_EVENT_UP 0x01 +#define TOUCH_EVENT_CONTACT 0x02 +#define TOUCH_EVENT_RESERVED 0x03 + +struct hycon_hy46xx_data { + struct i2c_client *client; + struct input_dev *input; + struct touchscreen_properties prop; + struct regulator *vcc; + + struct gpio_desc *reset_gpio; + + struct mutex mutex; + struct regmap *regmap; + + int threshold; + bool glove_enable; + int report_speed; + bool noise_filter_enable; + int filter_data; + int gain; + int edge_offset; + int rx_number_used; + int tx_number_used; + int power_mode; + int fw_version; + int lib_version; + int tp_information; + int tp_chip_id; + int bootloader_version; +}; + +static const struct regmap_config hycon_hy46xx_i2c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static bool hycon_hy46xx_check_checksum(struct hycon_hy46xx_data *tsdata, u8 *buf) +{ + u8 chksum = 0; + int i; + + for (i = 2; i < buf[HY46XX_CHKSUM_LEN]; i++) + chksum += buf[i]; + + if (chksum == buf[HY46XX_CHKSUM_CODE]) + return true; + + dev_err_ratelimited(&tsdata->client->dev, + "checksum error: 0x%02x expected, got 0x%02x\n", + chksum, buf[HY46XX_CHKSUM_CODE]); + + return false; +} + +static irqreturn_t hycon_hy46xx_isr(int irq, void *dev_id) +{ + struct hycon_hy46xx_data *tsdata = dev_id; + struct device *dev = &tsdata->client->dev; + u8 rdbuf[HY46XX_REPORT_PKT_LEN]; + int i, x, y, id; + int error; + + memset(rdbuf, 0, sizeof(rdbuf)); + + error = regmap_bulk_read(tsdata->regmap, 0, rdbuf, sizeof(rdbuf)); + if (error) { + dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n", + error); + goto out; + } + + if (!hycon_hy46xx_check_checksum(tsdata, rdbuf)) + goto out; + + for (i = 0; i < HY46XX_MAX_SUPPORTED_POINTS; i++) { + u8 *buf = &rdbuf[3 + (HY46XX_TPLEN * i)]; + int type = buf[0] >> 6; + + if (type == TOUCH_EVENT_RESERVED) + continue; + + x = get_unaligned_be16(buf) & 0x0fff; + y = get_unaligned_be16(buf + 2) & 0x0fff; + + id = buf[2] >> 4; + + input_mt_slot(tsdata->input, id); + if (input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER, + type != TOUCH_EVENT_UP)) + touchscreen_report_pos(tsdata->input, &tsdata->prop, + x, y, true); + } + + input_mt_report_pointer_emulation(tsdata->input, false); + input_sync(tsdata->input); + +out: + return IRQ_HANDLED; +} + +struct hycon_hy46xx_attribute { + struct device_attribute dattr; + size_t field_offset; + u8 address; + u8 limit_low; + u8 limit_high; +}; + +#define HYCON_ATTR_U8(_field, _mode, _address, _limit_low, _limit_high) \ + struct hycon_hy46xx_attribute hycon_hy46xx_attr_##_field = { \ + .dattr = __ATTR(_field, _mode, \ + hycon_hy46xx_setting_show, \ + hycon_hy46xx_setting_store), \ + .field_offset = offsetof(struct hycon_hy46xx_data, _field), \ + .address = _address, \ + .limit_low = _limit_low, \ + .limit_high = _limit_high, \ + } + +#define HYCON_ATTR_BOOL(_field, _mode, _address) \ + struct hycon_hy46xx_attribute hycon_hy46xx_attr_##_field = { \ + .dattr = __ATTR(_field, _mode, \ + hycon_hy46xx_setting_show, \ + hycon_hy46xx_setting_store), \ + .field_offset = offsetof(struct hycon_hy46xx_data, _field), \ + .address = _address, \ + .limit_low = false, \ + .limit_high = true, \ + } + +static ssize_t hycon_hy46xx_setting_show(struct device *dev, + struct device_attribute *dattr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client); + struct hycon_hy46xx_attribute *attr = + container_of(dattr, struct hycon_hy46xx_attribute, dattr); + u8 *field = (u8 *)tsdata + attr->field_offset; + size_t count = 0; + int error = 0; + int val; + + mutex_lock(&tsdata->mutex); + + error = regmap_read(tsdata->regmap, attr->address, &val); + if (error < 0) { + dev_err(&tsdata->client->dev, + "Failed to fetch attribute %s, error %d\n", + dattr->attr.name, error); + goto out; + } + + if (val != *field) { + dev_warn(&tsdata->client->dev, + "%s: read (%d) and stored value (%d) differ\n", + dattr->attr.name, val, *field); + *field = val; + } + + count = scnprintf(buf, PAGE_SIZE, "%d\n", val); + +out: + mutex_unlock(&tsdata->mutex); + return error ?: count; +} + +static ssize_t hycon_hy46xx_setting_store(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client); + struct hycon_hy46xx_attribute *attr = + container_of(dattr, struct hycon_hy46xx_attribute, dattr); + u8 *field = (u8 *)tsdata + attr->field_offset; + unsigned int val; + int error; + + mutex_lock(&tsdata->mutex); + + error = kstrtouint(buf, 0, &val); + if (error) + goto out; + + if (val < attr->limit_low || val > attr->limit_high) { + error = -ERANGE; + goto out; + } + + error = regmap_write(tsdata->regmap, attr->address, val); + if (error < 0) { + dev_err(&tsdata->client->dev, + "Failed to update attribute %s, error: %d\n", + dattr->attr.name, error); + goto out; + } + *field = val; + +out: + mutex_unlock(&tsdata->mutex); + return error ?: count; +} + +static HYCON_ATTR_U8(threshold, 0644, HY46XX_THRESHOLD, 0, 255); +static HYCON_ATTR_BOOL(glove_enable, 0644, HY46XX_GLOVE_EN); +static HYCON_ATTR_U8(report_speed, 0644, HY46XX_REPORT_SPEED, 0, 255); +static HYCON_ATTR_BOOL(noise_filter_enable, 0644, HY46XX_PWR_NOISE_EN); +static HYCON_ATTR_U8(filter_data, 0644, HY46XX_FILTER_DATA, 0, 5); +static HYCON_ATTR_U8(gain, 0644, HY46XX_GAIN, 0, 5); +static HYCON_ATTR_U8(edge_offset, 0644, HY46XX_EDGE_OFFSET, 0, 5); +static HYCON_ATTR_U8(fw_version, 0444, HY46XX_FW_VERSION, 0, 255); +static HYCON_ATTR_U8(lib_version, 0444, HY46XX_LIB_VERSION, 0, 255); +static HYCON_ATTR_U8(tp_information, 0444, HY46XX_TP_INFO, 0, 255); +static HYCON_ATTR_U8(tp_chip_id, 0444, HY46XX_TP_CHIP_ID, 0, 255); +static HYCON_ATTR_U8(bootloader_version, 0444, HY46XX_BOOT_VER, 0, 255); + +static struct attribute *hycon_hy46xx_attrs[] = { + &hycon_hy46xx_attr_threshold.dattr.attr, + &hycon_hy46xx_attr_glove_enable.dattr.attr, + &hycon_hy46xx_attr_report_speed.dattr.attr, + &hycon_hy46xx_attr_noise_filter_enable.dattr.attr, + &hycon_hy46xx_attr_filter_data.dattr.attr, + &hycon_hy46xx_attr_gain.dattr.attr, + &hycon_hy46xx_attr_edge_offset.dattr.attr, + &hycon_hy46xx_attr_fw_version.dattr.attr, + &hycon_hy46xx_attr_lib_version.dattr.attr, + &hycon_hy46xx_attr_tp_information.dattr.attr, + &hycon_hy46xx_attr_tp_chip_id.dattr.attr, + &hycon_hy46xx_attr_bootloader_version.dattr.attr, + NULL +}; + +static const struct attribute_group hycon_hy46xx_attr_group = { + .attrs = hycon_hy46xx_attrs, +}; + +static void hycon_hy46xx_get_defaults(struct device *dev, struct hycon_hy46xx_data *tsdata) +{ + bool val_bool; + int error; + u32 val; + + error = device_property_read_u32(dev, "hycon,threshold", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_THRESHOLD, val); + if (error < 0) + goto out; + + tsdata->threshold = val; + } + + val_bool = device_property_read_bool(dev, "hycon,glove-enable"); + error = regmap_write(tsdata->regmap, HY46XX_GLOVE_EN, val_bool); + if (error < 0) + goto out; + tsdata->glove_enable = val_bool; + + error = device_property_read_u32(dev, "hycon,report-speed-hz", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_REPORT_SPEED, val); + if (error < 0) + goto out; + + tsdata->report_speed = val; + } + + val_bool = device_property_read_bool(dev, "hycon,noise-filter-enable"); + error = regmap_write(tsdata->regmap, HY46XX_PWR_NOISE_EN, val_bool); + if (error < 0) + goto out; + tsdata->noise_filter_enable = val_bool; + + error = device_property_read_u32(dev, "hycon,filter-data", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_FILTER_DATA, val); + if (error < 0) + goto out; + + tsdata->filter_data = val; + } + + error = device_property_read_u32(dev, "hycon,gain", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_GAIN, val); + if (error < 0) + goto out; + + tsdata->gain = val; + } + + error = device_property_read_u32(dev, "hycon,edge-offset", &val); + if (!error) { + error = regmap_write(tsdata->regmap, HY46XX_EDGE_OFFSET, val); + if (error < 0) + goto out; + + tsdata->edge_offset = val; + } + + return; +out: + dev_err(&tsdata->client->dev, "Failed to set default settings"); +} + +static void hycon_hy46xx_get_parameters(struct hycon_hy46xx_data *tsdata) +{ + int error; + u32 val; + + error = regmap_read(tsdata->regmap, HY46XX_THRESHOLD, &val); + if (error < 0) + goto out; + tsdata->threshold = val; + + error = regmap_read(tsdata->regmap, HY46XX_GLOVE_EN, &val); + if (error < 0) + goto out; + tsdata->glove_enable = val; + + error = regmap_read(tsdata->regmap, HY46XX_REPORT_SPEED, &val); + if (error < 0) + goto out; + tsdata->report_speed = val; + + error = regmap_read(tsdata->regmap, HY46XX_PWR_NOISE_EN, &val); + if (error < 0) + goto out; + tsdata->noise_filter_enable = val; + + error = regmap_read(tsdata->regmap, HY46XX_FILTER_DATA, &val); + if (error < 0) + goto out; + tsdata->filter_data = val; + + error = regmap_read(tsdata->regmap, HY46XX_GAIN, &val); + if (error < 0) + goto out; + tsdata->gain = val; + + error = regmap_read(tsdata->regmap, HY46XX_EDGE_OFFSET, &val); + if (error < 0) + goto out; + tsdata->edge_offset = val; + + error = regmap_read(tsdata->regmap, HY46XX_RX_NR_USED, &val); + if (error < 0) + goto out; + tsdata->rx_number_used = val; + + error = regmap_read(tsdata->regmap, HY46XX_TX_NR_USED, &val); + if (error < 0) + goto out; + tsdata->tx_number_used = val; + + error = regmap_read(tsdata->regmap, HY46XX_PWR_MODE, &val); + if (error < 0) + goto out; + tsdata->power_mode = val; + + error = regmap_read(tsdata->regmap, HY46XX_FW_VERSION, &val); + if (error < 0) + goto out; + tsdata->fw_version = val; + + error = regmap_read(tsdata->regmap, HY46XX_LIB_VERSION, &val); + if (error < 0) + goto out; + tsdata->lib_version = val; + + error = regmap_read(tsdata->regmap, HY46XX_TP_INFO, &val); + if (error < 0) + goto out; + tsdata->tp_information = val; + + error = regmap_read(tsdata->regmap, HY46XX_TP_CHIP_ID, &val); + if (error < 0) + goto out; + tsdata->tp_chip_id = val; + + error = regmap_read(tsdata->regmap, HY46XX_BOOT_VER, &val); + if (error < 0) + goto out; + tsdata->bootloader_version = val; + + return; +out: + dev_err(&tsdata->client->dev, "Failed to read default settings"); +} + +static void hycon_hy46xx_disable_regulator(void *arg) +{ + struct hycon_hy46xx_data *data = arg; + + regulator_disable(data->vcc); +} + +static int hycon_hy46xx_probe(struct i2c_client *client) +{ + struct hycon_hy46xx_data *tsdata; + struct input_dev *input; + int error; + + dev_dbg(&client->dev, "probing for HYCON HY46XX I2C\n"); + + tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); + if (!tsdata) + return -ENOMEM; + + tsdata->vcc = devm_regulator_get(&client->dev, "vcc"); + if (IS_ERR(tsdata->vcc)) { + error = PTR_ERR(tsdata->vcc); + if (error != -EPROBE_DEFER) + dev_err(&client->dev, + "failed to request regulator: %d\n", error); + return error; + } + + error = regulator_enable(tsdata->vcc); + if (error < 0) { + dev_err(&client->dev, "failed to enable vcc: %d\n", error); + return error; + } + + error = devm_add_action_or_reset(&client->dev, + hycon_hy46xx_disable_regulator, + tsdata); + if (error) + return error; + + tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev, + "reset", GPIOD_OUT_LOW); + if (IS_ERR(tsdata->reset_gpio)) { + error = PTR_ERR(tsdata->reset_gpio); + dev_err(&client->dev, + "Failed to request GPIO reset pin, error %d\n", error); + return error; + } + + if (tsdata->reset_gpio) { + usleep_range(5000, 6000); + gpiod_set_value_cansleep(tsdata->reset_gpio, 1); + usleep_range(5000, 6000); + gpiod_set_value_cansleep(tsdata->reset_gpio, 0); + msleep(1000); + } + + input = devm_input_allocate_device(&client->dev); + if (!input) { + dev_err(&client->dev, "failed to allocate input device.\n"); + return -ENOMEM; + } + + mutex_init(&tsdata->mutex); + tsdata->client = client; + tsdata->input = input; + + tsdata->regmap = devm_regmap_init_i2c(client, + &hycon_hy46xx_i2c_regmap_config); + if (IS_ERR(tsdata->regmap)) { + dev_err(&client->dev, "regmap allocation failed\n"); + return PTR_ERR(tsdata->regmap); + } + + hycon_hy46xx_get_defaults(&client->dev, tsdata); + hycon_hy46xx_get_parameters(tsdata); + + input->name = "Hycon Capacitive Touch"; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, -1, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, -1, 0, 0); + + touchscreen_parse_properties(input, true, &tsdata->prop); + + error = input_mt_init_slots(input, HY46XX_MAX_SUPPORTED_POINTS, + INPUT_MT_DIRECT); + if (error) { + dev_err(&client->dev, "Unable to init MT slots.\n"); + return error; + } + + i2c_set_clientdata(client, tsdata); + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, hycon_hy46xx_isr, IRQF_ONESHOT, + client->name, tsdata); + if (error) { + dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); + return error; + } + + error = devm_device_add_group(&client->dev, &hycon_hy46xx_attr_group); + if (error) + return error; + + error = input_register_device(input); + if (error) + return error; + + dev_dbg(&client->dev, + "HYCON HY46XX initialized: IRQ %d, Reset pin %d.\n", + client->irq, + tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1); + + return 0; +} + +static const struct i2c_device_id hycon_hy46xx_id[] = { + { .name = "hy4613" }, + { .name = "hy4614" }, + { .name = "hy4621" }, + { .name = "hy4623" }, + { .name = "hy4633" }, + { .name = "hy4635" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, hycon_hy46xx_id); + +static const struct of_device_id hycon_hy46xx_of_match[] = { + { .compatible = "hycon,hy4613" }, + { .compatible = "hycon,hy4614" }, + { .compatible = "hycon,hy4621" }, + { .compatible = "hycon,hy4623" }, + { .compatible = "hycon,hy4633" }, + { .compatible = "hycon,hy4635" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, hycon_hy46xx_of_match); + +static struct i2c_driver hycon_hy46xx_driver = { + .driver = { + .name = "hycon_hy46xx", + .of_match_table = hycon_hy46xx_of_match, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .id_table = hycon_hy46xx_id, + .probe_new = hycon_hy46xx_probe, +}; + +module_i2c_driver(hycon_hy46xx_driver); + +MODULE_AUTHOR("Giulio Benetti "); +MODULE_DESCRIPTION("HYCON HY46XX I2C Touchscreen Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3