From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/input/touchscreen/raspberrypi-ts.c | 229 +++++++++++++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 drivers/input/touchscreen/raspberrypi-ts.c (limited to 'drivers/input/touchscreen/raspberrypi-ts.c') diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c new file mode 100644 index 000000000..5000f5fd9 --- /dev/null +++ b/drivers/input/touchscreen/raspberrypi-ts.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raspberry Pi firmware based touchscreen driver + * + * Copyright (C) 2015, 2017 Raspberry Pi + * Copyright (C) 2018 Nicolas Saenz Julienne + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RPI_TS_DEFAULT_WIDTH 800 +#define RPI_TS_DEFAULT_HEIGHT 480 + +#define RPI_TS_MAX_SUPPORTED_POINTS 10 + +#define RPI_TS_FTS_TOUCH_DOWN 0 +#define RPI_TS_FTS_TOUCH_CONTACT 2 + +#define RPI_TS_POLL_INTERVAL 17 /* 60fps */ + +#define RPI_TS_NPOINTS_REG_INVALIDATE 99 + +struct rpi_ts { + struct platform_device *pdev; + struct input_dev *input; + struct touchscreen_properties prop; + + void __iomem *fw_regs_va; + dma_addr_t fw_regs_phys; + + int known_ids; +}; + +struct rpi_ts_regs { + u8 device_mode; + u8 gesture_id; + u8 num_points; + struct rpi_ts_touch { + u8 xh; + u8 xl; + u8 yh; + u8 yl; + u8 pressure; /* Not supported */ + u8 area; /* Not supported */ + } point[RPI_TS_MAX_SUPPORTED_POINTS]; +}; + +static void rpi_ts_poll(struct input_dev *input) +{ + struct rpi_ts *ts = input_get_drvdata(input); + struct rpi_ts_regs regs; + int modified_ids = 0; + long released_ids; + int event_type; + int touchid; + int x, y; + int i; + + memcpy_fromio(®s, ts->fw_regs_va, sizeof(regs)); + /* + * We poll the memory based register copy of the touchscreen chip using + * the number of points register to know whether the copy has been + * updated (we write 99 to the memory copy, the GPU will write between + * 0 - 10 points) + */ + iowrite8(RPI_TS_NPOINTS_REG_INVALIDATE, + ts->fw_regs_va + offsetof(struct rpi_ts_regs, num_points)); + + if (regs.num_points == RPI_TS_NPOINTS_REG_INVALIDATE || + (regs.num_points == 0 && ts->known_ids == 0)) + return; + + for (i = 0; i < regs.num_points; i++) { + x = (((int)regs.point[i].xh & 0xf) << 8) + regs.point[i].xl; + y = (((int)regs.point[i].yh & 0xf) << 8) + regs.point[i].yl; + touchid = (regs.point[i].yh >> 4) & 0xf; + event_type = (regs.point[i].xh >> 6) & 0x03; + + modified_ids |= BIT(touchid); + + if (event_type == RPI_TS_FTS_TOUCH_DOWN || + event_type == RPI_TS_FTS_TOUCH_CONTACT) { + input_mt_slot(input, touchid); + input_mt_report_slot_state(input, MT_TOOL_FINGER, 1); + touchscreen_report_pos(input, &ts->prop, x, y, true); + } + } + + released_ids = ts->known_ids & ~modified_ids; + for_each_set_bit(i, &released_ids, RPI_TS_MAX_SUPPORTED_POINTS) { + input_mt_slot(input, i); + input_mt_report_slot_inactive(input); + modified_ids &= ~(BIT(i)); + } + ts->known_ids = modified_ids; + + input_mt_sync_frame(input); + input_sync(input); +} + +static void rpi_ts_dma_cleanup(void *data) +{ + struct rpi_ts *ts = data; + struct device *dev = &ts->pdev->dev; + + dma_free_coherent(dev, PAGE_SIZE, ts->fw_regs_va, ts->fw_regs_phys); +} + +static int rpi_ts_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct input_dev *input; + struct device_node *fw_node; + struct rpi_firmware *fw; + struct rpi_ts *ts; + u32 touchbuf; + int error; + + fw_node = of_get_parent(np); + if (!fw_node) { + dev_err(dev, "Missing firmware node\n"); + return -ENOENT; + } + + fw = rpi_firmware_get(fw_node); + of_node_put(fw_node); + if (!fw) + return -EPROBE_DEFER; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + ts->pdev = pdev; + + ts->fw_regs_va = dma_alloc_coherent(dev, PAGE_SIZE, &ts->fw_regs_phys, + GFP_KERNEL); + if (!ts->fw_regs_va) { + dev_err(dev, "failed to dma_alloc_coherent\n"); + return -ENOMEM; + } + + error = devm_add_action_or_reset(dev, rpi_ts_dma_cleanup, ts); + if (error) { + dev_err(dev, "failed to devm_add_action_or_reset, %d\n", error); + return error; + } + + touchbuf = (u32)ts->fw_regs_phys; + error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, + &touchbuf, sizeof(touchbuf)); + rpi_firmware_put(fw); + if (error || touchbuf != 0) { + dev_warn(dev, "Failed to set touchbuf, %d\n", error); + return error; + } + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + ts->input = input; + input_set_drvdata(input, ts); + + input->name = "raspberrypi-ts"; + input->id.bustype = BUS_HOST; + + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + RPI_TS_DEFAULT_WIDTH, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + RPI_TS_DEFAULT_HEIGHT, 0, 0); + touchscreen_parse_properties(input, true, &ts->prop); + + error = input_mt_init_slots(input, RPI_TS_MAX_SUPPORTED_POINTS, + INPUT_MT_DIRECT); + if (error) { + dev_err(dev, "could not init mt slots, %d\n", error); + return error; + } + + error = input_setup_polling(input, rpi_ts_poll); + if (error) { + dev_err(dev, "could not set up polling mode, %d\n", error); + return error; + } + + input_set_poll_interval(input, RPI_TS_POLL_INTERVAL); + + error = input_register_device(input); + if (error) { + dev_err(dev, "could not register input device, %d\n", error); + return error; + } + + return 0; +} + +static const struct of_device_id rpi_ts_match[] = { + { .compatible = "raspberrypi,firmware-ts", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rpi_ts_match); + +static struct platform_driver rpi_ts_driver = { + .driver = { + .name = "raspberrypi-ts", + .of_match_table = rpi_ts_match, + }, + .probe = rpi_ts_probe, +}; +module_platform_driver(rpi_ts_driver); + +MODULE_AUTHOR("Gordon Hollingworth"); +MODULE_AUTHOR("Nicolas Saenz Julienne "); +MODULE_DESCRIPTION("Raspberry Pi firmware based touchscreen driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3