From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/interconnect/qcom/icc-rpmh.c | 260 +++++++++++++++++++++++++++++++++++ 1 file changed, 260 insertions(+) create mode 100644 drivers/interconnect/qcom/icc-rpmh.c (limited to 'drivers/interconnect/qcom/icc-rpmh.c') diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c new file mode 100644 index 000000000..fd17291c6 --- /dev/null +++ b/drivers/interconnect/qcom/icc-rpmh.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +#include "bcm-voter.h" +#include "icc-common.h" +#include "icc-rpmh.h" + +/** + * qcom_icc_pre_aggregate - cleans up stale values from prior icc_set + * @node: icc node to operate on + */ +void qcom_icc_pre_aggregate(struct icc_node *node) +{ + size_t i; + struct qcom_icc_node *qn; + struct qcom_icc_provider *qp; + + qn = node->data; + qp = to_qcom_provider(node->provider); + + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { + qn->sum_avg[i] = 0; + qn->max_peak[i] = 0; + } + + for (i = 0; i < qn->num_bcms; i++) + qcom_icc_bcm_voter_add(qp->voter, qn->bcms[i]); +} +EXPORT_SYMBOL_GPL(qcom_icc_pre_aggregate); + +/** + * qcom_icc_aggregate - aggregate bw for buckets indicated by tag + * @node: node to aggregate + * @tag: tag to indicate which buckets to aggregate + * @avg_bw: new bw to sum aggregate + * @peak_bw: new bw to max aggregate + * @agg_avg: existing aggregate avg bw val + * @agg_peak: existing aggregate peak bw val + */ +int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw, + u32 peak_bw, u32 *agg_avg, u32 *agg_peak) +{ + size_t i; + struct qcom_icc_node *qn; + + qn = node->data; + + if (!tag) + tag = QCOM_ICC_TAG_ALWAYS; + + for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) { + if (tag & BIT(i)) { + qn->sum_avg[i] += avg_bw; + qn->max_peak[i] = max_t(u32, qn->max_peak[i], peak_bw); + } + + if (node->init_avg || node->init_peak) { + qn->sum_avg[i] = max_t(u64, qn->sum_avg[i], node->init_avg); + qn->max_peak[i] = max_t(u64, qn->max_peak[i], node->init_peak); + } + } + + *agg_avg += avg_bw; + *agg_peak = max_t(u32, *agg_peak, peak_bw); + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_icc_aggregate); + +/** + * qcom_icc_set - set the constraints based on path + * @src: source node for the path to set constraints on + * @dst: destination node for the path to set constraints on + * + * Return: 0 on success, or an error code otherwise + */ +int qcom_icc_set(struct icc_node *src, struct icc_node *dst) +{ + struct qcom_icc_provider *qp; + struct icc_node *node; + + if (!src) + node = dst; + else + node = src; + + qp = to_qcom_provider(node->provider); + + qcom_icc_bcm_voter_commit(qp->voter); + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_icc_set); + +/** + * qcom_icc_bcm_init - populates bcm aux data and connect qnodes + * @bcm: bcm to be initialized + * @dev: associated provider device + * + * Return: 0 on success, or an error code otherwise + */ +int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev) +{ + struct qcom_icc_node *qn; + const struct bcm_db *data; + size_t data_count; + int i; + + /* BCM is already initialised*/ + if (bcm->addr) + return 0; + + bcm->addr = cmd_db_read_addr(bcm->name); + if (!bcm->addr) { + dev_err(dev, "%s could not find RPMh address\n", + bcm->name); + return -EINVAL; + } + + data = cmd_db_read_aux_data(bcm->name, &data_count); + if (IS_ERR(data)) { + dev_err(dev, "%s command db read error (%ld)\n", + bcm->name, PTR_ERR(data)); + return PTR_ERR(data); + } + if (!data_count) { + dev_err(dev, "%s command db missing or partial aux data\n", + bcm->name); + return -EINVAL; + } + + bcm->aux_data.unit = le32_to_cpu(data->unit); + bcm->aux_data.width = le16_to_cpu(data->width); + bcm->aux_data.vcd = data->vcd; + bcm->aux_data.reserved = data->reserved; + INIT_LIST_HEAD(&bcm->list); + INIT_LIST_HEAD(&bcm->ws_list); + + if (!bcm->vote_scale) + bcm->vote_scale = 1000; + + /* Link Qnodes to their respective BCMs */ + for (i = 0; i < bcm->num_nodes; i++) { + qn = bcm->nodes[i]; + qn->bcms[qn->num_bcms] = bcm; + qn->num_bcms++; + } + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_icc_bcm_init); + +int qcom_icc_rpmh_probe(struct platform_device *pdev) +{ + const struct qcom_icc_desc *desc; + struct device *dev = &pdev->dev; + struct icc_onecell_data *data; + struct icc_provider *provider; + struct qcom_icc_node * const *qnodes, *qn; + struct qcom_icc_provider *qp; + struct icc_node *node; + size_t num_nodes, i, j; + int ret; + + desc = of_device_get_match_data(dev); + if (!desc) + return -EINVAL; + + qnodes = desc->nodes; + num_nodes = desc->num_nodes; + + qp = devm_kzalloc(dev, sizeof(*qp), GFP_KERNEL); + if (!qp) + return -ENOMEM; + + data = devm_kzalloc(dev, struct_size(data, nodes, num_nodes), GFP_KERNEL); + if (!data) + return -ENOMEM; + + provider = &qp->provider; + provider->dev = dev; + provider->set = qcom_icc_set; + provider->pre_aggregate = qcom_icc_pre_aggregate; + provider->aggregate = qcom_icc_aggregate; + provider->xlate_extended = qcom_icc_xlate_extended; + INIT_LIST_HEAD(&provider->nodes); + provider->data = data; + + qp->dev = dev; + qp->bcms = desc->bcms; + qp->num_bcms = desc->num_bcms; + + qp->voter = of_bcm_voter_get(qp->dev, NULL); + if (IS_ERR(qp->voter)) + return PTR_ERR(qp->voter); + + ret = icc_provider_add(provider); + if (ret) + return ret; + + for (i = 0; i < qp->num_bcms; i++) + qcom_icc_bcm_init(qp->bcms[i], dev); + + for (i = 0; i < num_nodes; i++) { + qn = qnodes[i]; + if (!qn) + continue; + + node = icc_node_create(qn->id); + if (IS_ERR(node)) { + ret = PTR_ERR(node); + goto err; + } + + node->name = qn->name; + node->data = qn; + icc_node_add(node, provider); + + for (j = 0; j < qn->num_links; j++) + icc_link_create(node, qn->links[j]); + + data->nodes[i] = node; + } + + data->num_nodes = num_nodes; + platform_set_drvdata(pdev, qp); + + /* Populate child NoC devices if any */ + if (of_get_child_count(dev->of_node) > 0) + return of_platform_populate(dev->of_node, NULL, NULL, dev); + + return 0; +err: + icc_nodes_remove(provider); + icc_provider_del(provider); + return ret; +} +EXPORT_SYMBOL_GPL(qcom_icc_rpmh_probe); + +int qcom_icc_rpmh_remove(struct platform_device *pdev) +{ + struct qcom_icc_provider *qp = platform_get_drvdata(pdev); + + icc_nodes_remove(&qp->provider); + icc_provider_del(&qp->provider); + + return 0; +} +EXPORT_SYMBOL_GPL(qcom_icc_rpmh_remove); + +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3