From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/iommu/Kconfig | 510 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 510 insertions(+) create mode 100644 drivers/iommu/Kconfig (limited to 'drivers/iommu/Kconfig') diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig new file mode 100644 index 000000000..79707685d --- /dev/null +++ b/drivers/iommu/Kconfig @@ -0,0 +1,510 @@ +# SPDX-License-Identifier: GPL-2.0-only +# The IOVA library may also be used by non-IOMMU_API users +config IOMMU_IOVA + tristate + +# The IOASID library may also be used by non-IOMMU_API users +config IOASID + tristate + +# IOMMU_API always gets selected by whoever wants it. +config IOMMU_API + bool + +menuconfig IOMMU_SUPPORT + bool "IOMMU Hardware Support" + depends on MMU + default y + help + Say Y here if you want to compile device drivers for IO Memory + Management Units into the kernel. These devices usually allow to + remap DMA requests and/or remap interrupts from other devices on the + system. + +if IOMMU_SUPPORT + +menu "Generic IOMMU Pagetable Support" + +# Selected by the actual pagetable implementations +config IOMMU_IO_PGTABLE + bool + +config IOMMU_IO_PGTABLE_LPAE + bool "ARMv7/v8 Long Descriptor Format" + select IOMMU_IO_PGTABLE + depends on ARM || ARM64 || (COMPILE_TEST && !GENERIC_ATOMIC64) + help + Enable support for the ARM long descriptor pagetable format. + This allocator supports 4K/2M/1G, 16K/32M and 64K/512M page + sizes at both stage-1 and stage-2, as well as address spaces + up to 48-bits in size. + +config IOMMU_IO_PGTABLE_LPAE_SELFTEST + bool "LPAE selftests" + depends on IOMMU_IO_PGTABLE_LPAE + help + Enable self-tests for LPAE page table allocator. This performs + a series of page-table consistency checks during boot. + + If unsure, say N here. + +config IOMMU_IO_PGTABLE_ARMV7S + bool "ARMv7/v8 Short Descriptor Format" + select IOMMU_IO_PGTABLE + depends on ARM || ARM64 || COMPILE_TEST + help + Enable support for the ARM Short-descriptor pagetable format. + This supports 32-bit virtual and physical addresses mapped using + 2-level tables with 4KB pages/1MB sections, and contiguous entries + for 64KB pages/16MB supersections if indicated by the IOMMU driver. + +config IOMMU_IO_PGTABLE_ARMV7S_SELFTEST + bool "ARMv7s selftests" + depends on IOMMU_IO_PGTABLE_ARMV7S + help + Enable self-tests for ARMv7s page table allocator. This performs + a series of page-table consistency checks during boot. + + If unsure, say N here. + +config IOMMU_IO_PGTABLE_DART + bool "Apple DART Formats" + select IOMMU_IO_PGTABLE + depends on ARM64 || (COMPILE_TEST && !GENERIC_ATOMIC64) + help + Enable support for the Apple DART pagetable formats. These include + the t8020 and t6000/t8110 DART formats used in Apple M1/M2 family + SoCs. + + If unsure, say N here. + +endmenu + +config IOMMU_DEBUGFS + bool "Export IOMMU internals in DebugFS" + depends on DEBUG_FS + help + Allows exposure of IOMMU device internals. This option enables + the use of debugfs by IOMMU drivers as required. Devices can, + at initialization time, cause the IOMMU code to create a top-level + debug/iommu directory, and then populate a subdirectory with + entries as required. + +choice + prompt "IOMMU default domain type" + depends on IOMMU_API + default IOMMU_DEFAULT_DMA_LAZY if X86 || IA64 + default IOMMU_DEFAULT_DMA_STRICT + help + Choose the type of IOMMU domain used to manage DMA API usage by + device drivers. The options here typically represent different + levels of tradeoff between robustness/security and performance, + depending on the IOMMU driver. Not all IOMMUs support all options. + This choice can be overridden at boot via the command line, and for + some devices also at runtime via sysfs. + + If unsure, keep the default. + +config IOMMU_DEFAULT_DMA_STRICT + bool "Translated - Strict" + help + Trusted devices use translation to restrict their access to only + DMA-mapped pages, with strict TLB invalidation on unmap. Equivalent + to passing "iommu.passthrough=0 iommu.strict=1" on the command line. + + Untrusted devices always use this mode, with an additional layer of + bounce-buffering such that they cannot gain access to any unrelated + data within a mapped page. + +config IOMMU_DEFAULT_DMA_LAZY + bool "Translated - Lazy" + help + Trusted devices use translation to restrict their access to only + DMA-mapped pages, but with "lazy" batched TLB invalidation. This + mode allows higher performance with some IOMMUs due to reduced TLB + flushing, but at the cost of reduced isolation since devices may be + able to access memory for some time after it has been unmapped. + Equivalent to passing "iommu.passthrough=0 iommu.strict=0" on the + command line. + + If this mode is not supported by the IOMMU driver, the effective + runtime default will fall back to IOMMU_DEFAULT_DMA_STRICT. + +config IOMMU_DEFAULT_PASSTHROUGH + bool "Passthrough" + help + Trusted devices are identity-mapped, giving them unrestricted access + to memory with minimal performance overhead. Equivalent to passing + "iommu.passthrough=1" (historically "iommu=pt") on the command line. + + If this mode is not supported by the IOMMU driver, the effective + runtime default will fall back to IOMMU_DEFAULT_DMA_STRICT. + +endchoice + +config OF_IOMMU + def_bool y + depends on OF && IOMMU_API + +# IOMMU-agnostic DMA-mapping layer +config IOMMU_DMA + def_bool ARM64 || IA64 || X86 + select DMA_OPS + select IOMMU_API + select IOMMU_IOVA + select IRQ_MSI_IOMMU + select NEED_SG_DMA_LENGTH + +# Shared Virtual Addressing +config IOMMU_SVA + bool + select IOASID + +config FSL_PAMU + bool "Freescale IOMMU support" + depends on PCI + depends on PHYS_64BIT + depends on PPC_E500MC || (COMPILE_TEST && PPC) + select IOMMU_API + select GENERIC_ALLOCATOR + help + Freescale PAMU support. PAMU is the IOMMU present on Freescale QorIQ platforms. + PAMU can authorize memory access, remap the memory address, and remap I/O + transaction types. + +# MSM IOMMU support +config MSM_IOMMU + bool "MSM IOMMU Support" + depends on ARM + depends on ARCH_MSM8X60 || ARCH_MSM8960 || COMPILE_TEST + select IOMMU_API + select IOMMU_IO_PGTABLE_ARMV7S + help + Support for the IOMMUs found on certain Qualcomm SOCs. + These IOMMUs allow virtualization of the address space used by most + cores within the multimedia subsystem. + + If unsure, say N here. + +source "drivers/iommu/amd/Kconfig" +source "drivers/iommu/intel/Kconfig" +source "drivers/iommu/iommufd/Kconfig" + +config IRQ_REMAP + bool "Support for Interrupt Remapping" + depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI + select DMAR_TABLE + help + Supports Interrupt remapping for IO-APIC and MSI devices. + To use x2apic mode in the CPU's which support x2APIC enhancements or + to support platforms with CPU's having > 8 bit APIC ID, say Y. + +# OMAP IOMMU support +config OMAP_IOMMU + bool "OMAP IOMMU Support" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select IOMMU_API + help + The OMAP3 media platform drivers depend on iommu support, + if you need them say Y here. + +config OMAP_IOMMU_DEBUG + bool "Export OMAP IOMMU internals in DebugFS" + depends on OMAP_IOMMU && DEBUG_FS + help + Select this to see extensive information about + the internal state of OMAP IOMMU in debugfs. + + Say N unless you know you need this. + +config ROCKCHIP_IOMMU + bool "Rockchip IOMMU Support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + select IOMMU_API + select ARM_DMA_USE_IOMMU + help + Support for IOMMUs found on Rockchip rk32xx SOCs. + These IOMMUs allow virtualization of the address space used by most + cores within the multimedia subsystem. + Say Y here if you are using a Rockchip SoC that includes an IOMMU + device. + +config SUN50I_IOMMU + bool "Allwinner H6 IOMMU Support" + depends on HAS_DMA + depends on ARCH_SUNXI || COMPILE_TEST + select ARM_DMA_USE_IOMMU + select IOMMU_API + help + Support for the IOMMU introduced in the Allwinner H6 SoCs. + +config TEGRA_IOMMU_GART + bool "Tegra GART IOMMU Support" + depends on ARCH_TEGRA_2x_SOC + depends on TEGRA_MC + select IOMMU_API + help + Enables support for remapping discontiguous physical memory + shared with the operating system into contiguous I/O virtual + space through the GART (Graphics Address Relocation Table) + hardware included on Tegra SoCs. + +config TEGRA_IOMMU_SMMU + bool "NVIDIA Tegra SMMU Support" + depends on ARCH_TEGRA + depends on TEGRA_AHB + depends on TEGRA_MC + select IOMMU_API + help + This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra + SoCs (Tegra30 up to Tegra210). + +config EXYNOS_IOMMU + bool "Exynos IOMMU Support" + depends on ARCH_EXYNOS || COMPILE_TEST + depends on !CPU_BIG_ENDIAN # revisit driver if we can enable big-endian ptes + select IOMMU_API + select ARM_DMA_USE_IOMMU + help + Support for the IOMMU (System MMU) of Samsung Exynos application + processor family. This enables H/W multimedia accelerators to see + non-linear physical memory chunks as linear memory in their + address space. + + If unsure, say N here. + +config EXYNOS_IOMMU_DEBUG + bool "Debugging log for Exynos IOMMU" + depends on EXYNOS_IOMMU + help + Select this to see the detailed log message that shows what + happens in the IOMMU driver. + + Say N unless you need kernel log message for IOMMU debugging. + +config IPMMU_VMSA + bool "Renesas VMSA-compatible IPMMU" + depends on ARCH_RENESAS || (COMPILE_TEST && !GENERIC_ATOMIC64) + select IOMMU_API + select IOMMU_IO_PGTABLE_LPAE + select ARM_DMA_USE_IOMMU + help + Support for the Renesas VMSA-compatible IPMMU found in the R-Mobile + APE6, R-Car Gen{2,3} and RZ/G{1,2} SoCs. + + If unsure, say N. + +config SPAPR_TCE_IOMMU + bool "sPAPR TCE IOMMU Support" + depends on PPC_POWERNV || PPC_PSERIES + select IOMMU_API + help + Enables bits of IOMMU API required by VFIO. The iommu_ops + is not implemented as it is not necessary for VFIO. + +config APPLE_DART + tristate "Apple DART IOMMU Support" + depends on ARCH_APPLE || (COMPILE_TEST && !GENERIC_ATOMIC64) + select IOMMU_API + select IOMMU_IO_PGTABLE_DART + default ARCH_APPLE + help + Support for Apple DART (Device Address Resolution Table) IOMMUs + found in Apple ARM SoCs like the M1. + This IOMMU is required for most peripherals using DMA to access + the main memory. + + Say Y here if you are using an Apple SoC. + +# ARM IOMMU support +config ARM_SMMU + tristate "ARM Ltd. System MMU (SMMU) Support" + depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64) + select IOMMU_API + select IOMMU_IO_PGTABLE_LPAE + select ARM_DMA_USE_IOMMU if ARM + help + Support for implementations of the ARM System MMU architecture + versions 1 and 2. + + Say Y here if your SoC includes an IOMMU device implementing + the ARM SMMU architecture. + +config ARM_SMMU_LEGACY_DT_BINDINGS + bool "Support the legacy \"mmu-masters\" devicetree bindings" + depends on ARM_SMMU=y && OF + help + Support for the badly designed and deprecated "mmu-masters" + devicetree bindings. This allows some DMA masters to attach + to the SMMU but does not provide any support via the DMA API. + If you're lucky, you might be able to get VFIO up and running. + + If you say Y here then you'll make me very sad. Instead, say N + and move your firmware to the utopian future that was 2016. + +config ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT + bool "Default to disabling bypass on ARM SMMU v1 and v2" + depends on ARM_SMMU + default y + help + Say Y here to (by default) disable bypass streams such that + incoming transactions from devices that are not attached to + an iommu domain will report an abort back to the device and + will not be allowed to pass through the SMMU. + + Any old kernels that existed before this KConfig was + introduced would default to _allowing_ bypass (AKA the + equivalent of NO for this config). However the default for + this option is YES because the old behavior is insecure. + + There are few reasons to allow unmatched stream bypass, and + even fewer good ones. If saying YES here breaks your board + you should work on fixing your board. This KConfig option + is expected to be removed in the future and we'll simply + hardcode the bypass disable in the code. + + NOTE: the kernel command line parameter + 'arm-smmu.disable_bypass' will continue to override this + config. + +config ARM_SMMU_QCOM + def_tristate y + depends on ARM_SMMU && ARCH_QCOM + select QCOM_SCM + help + When running on a Qualcomm platform that has the custom variant + of the ARM SMMU, this needs to be built into the SMMU driver. + +config ARM_SMMU_QCOM_DEBUG + bool "ARM SMMU QCOM implementation defined debug support" + depends on ARM_SMMU_QCOM + help + Support for implementation specific debug features in ARM SMMU + hardware found in QTI platforms. + + Say Y here to enable debug for issues such as TLB sync timeouts + which requires implementation defined register dumps. + +config ARM_SMMU_V3 + tristate "ARM Ltd. System MMU Version 3 (SMMUv3) Support" + depends on ARM64 + select IOMMU_API + select IOMMU_IO_PGTABLE_LPAE + select GENERIC_MSI_IRQ + help + Support for implementations of the ARM System MMU architecture + version 3 providing translation support to a PCIe root complex. + + Say Y here if your system includes an IOMMU device implementing + the ARM SMMUv3 architecture. + +config ARM_SMMU_V3_SVA + bool "Shared Virtual Addressing support for the ARM SMMUv3" + depends on ARM_SMMU_V3 + select IOMMU_SVA + select MMU_NOTIFIER + help + Support for sharing process address spaces with devices using the + SMMUv3. + + Say Y here if your system supports SVA extensions such as PCIe PASID + and PRI. + +config S390_IOMMU + def_bool y if S390 && PCI + depends on S390 && PCI + select IOMMU_API + help + Support for the IOMMU API for s390 PCI devices. + +config S390_CCW_IOMMU + bool "S390 CCW IOMMU Support" + depends on S390 && CCW || COMPILE_TEST + select IOMMU_API + help + Enables bits of IOMMU API required by VFIO. The iommu_ops + is not implemented as it is not necessary for VFIO. + +config S390_AP_IOMMU + bool "S390 AP IOMMU Support" + depends on S390 && ZCRYPT || COMPILE_TEST + select IOMMU_API + help + Enables bits of IOMMU API required by VFIO. The iommu_ops + is not implemented as it is not necessary for VFIO. + +config MTK_IOMMU + tristate "MediaTek IOMMU Support" + depends on ARCH_MEDIATEK || COMPILE_TEST + select ARM_DMA_USE_IOMMU + select IOMMU_API + select IOMMU_IO_PGTABLE_ARMV7S + select MEMORY + select MTK_SMI + help + Support for the M4U on certain Mediatek SOCs. M4U is MultiMedia + Memory Management Unit. This option enables remapping of DMA memory + accesses for the multimedia subsystem. + + If unsure, say N here. + +config MTK_IOMMU_V1 + tristate "MediaTek IOMMU Version 1 (M4U gen1) Support" + depends on ARM + depends on ARCH_MEDIATEK || COMPILE_TEST + select ARM_DMA_USE_IOMMU + select IOMMU_API + select MEMORY + select MTK_SMI + help + Support for the M4U on certain Mediatek SoCs. M4U generation 1 HW is + Multimedia Memory Managememt Unit. This option enables remapping of + DMA memory accesses for the multimedia subsystem. + + if unsure, say N here. + +config QCOM_IOMMU + # Note: iommu drivers cannot (yet?) be built as modules + bool "Qualcomm IOMMU Support" + depends on ARCH_QCOM || (COMPILE_TEST && !GENERIC_ATOMIC64) + select QCOM_SCM + select IOMMU_API + select IOMMU_IO_PGTABLE_LPAE + select ARM_DMA_USE_IOMMU + help + Support for IOMMU on certain Qualcomm SoCs. + +config HYPERV_IOMMU + bool "Hyper-V IRQ Handling" + depends on HYPERV && X86 + select IOMMU_API + default HYPERV + help + Stub IOMMU driver to handle IRQs to support Hyper-V Linux + guest and root partitions. + +config VIRTIO_IOMMU + tristate "Virtio IOMMU driver" + depends on VIRTIO + depends on (ARM64 || X86) + select IOMMU_API + select INTERVAL_TREE + select ACPI_VIOT if ACPI + help + Para-virtualised IOMMU driver with virtio. + + Say Y here if you intend to run this kernel as a guest. + +config SPRD_IOMMU + tristate "Unisoc IOMMU Support" + depends on ARCH_SPRD || COMPILE_TEST + select IOMMU_API + help + Support for IOMMU on Unisoc's SoCs, this IOMMU can be used by + Unisoc's multimedia devices, such as display, Image codec(jpeg) + and a few signal processors, including VSP(video), GSP(graphic), + ISP(image), and CPP(camera pixel processor), etc. + + Say Y here if you want to use the multimedia devices listed above. + +endif # IOMMU_SUPPORT -- cgit v1.2.3