From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/ipack/carriers/tpci200.h | 162 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 drivers/ipack/carriers/tpci200.h (limited to 'drivers/ipack/carriers/tpci200.h') diff --git a/drivers/ipack/carriers/tpci200.h b/drivers/ipack/carriers/tpci200.h new file mode 100644 index 000000000..e79ac64ab --- /dev/null +++ b/drivers/ipack/carriers/tpci200.h @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * driver for the carrier TEWS TPCI-200 + * + * Copyright (C) 2009-2012 CERN (www.cern.ch) + * Author: Nicolas Serafini, EIC2 SA + * Author: Samuel Iglesias Gonsalvez + */ + +#ifndef _TPCI200_H_ +#define _TPCI200_H_ + +#include +#include +#include +#include +#include +#include + +#define TPCI200_NB_SLOT 0x4 +#define TPCI200_NB_BAR 0x6 + +#define TPCI200_VENDOR_ID 0x1498 +#define TPCI200_DEVICE_ID 0x30C8 +#define TPCI200_SUBVENDOR_ID 0x1498 +#define TPCI200_SUBDEVICE_ID 0x300A + +#define TPCI200_CFG_MEM_BAR 0 +#define TPCI200_IP_INTERFACE_BAR 2 +#define TPCI200_IO_ID_INT_SPACES_BAR 3 +#define TPCI200_MEM16_SPACE_BAR 4 +#define TPCI200_MEM8_SPACE_BAR 5 + +struct tpci200_regs { + __le16 revision; + /* writes to control should occur with the mutex held to protect + * read-modify-write operations */ + __le16 control[4]; + __le16 reset; + __le16 status; + u8 reserved[242]; +} __packed; + +#define TPCI200_IFACE_SIZE 0x100 + +#define TPCI200_IO_SPACE_OFF 0x0000 +#define TPCI200_IO_SPACE_INTERVAL 0x0100 +#define TPCI200_IO_SPACE_SIZE 0x0080 +#define TPCI200_ID_SPACE_OFF 0x0080 +#define TPCI200_ID_SPACE_INTERVAL 0x0100 +#define TPCI200_ID_SPACE_SIZE 0x0040 +#define TPCI200_INT_SPACE_OFF 0x00C0 +#define TPCI200_INT_SPACE_INTERVAL 0x0100 +#define TPCI200_INT_SPACE_SIZE 0x0040 +#define TPCI200_IOIDINT_SIZE 0x0400 + +#define TPCI200_MEM8_SPACE_INTERVAL 0x00400000 +#define TPCI200_MEM8_SPACE_SIZE 0x00400000 +#define TPCI200_MEM16_SPACE_INTERVAL 0x00800000 +#define TPCI200_MEM16_SPACE_SIZE 0x00800000 + +/* control field in tpci200_regs */ +#define TPCI200_INT0_EN 0x0040 +#define TPCI200_INT1_EN 0x0080 +#define TPCI200_INT0_EDGE 0x0010 +#define TPCI200_INT1_EDGE 0x0020 +#define TPCI200_ERR_INT_EN 0x0008 +#define TPCI200_TIME_INT_EN 0x0004 +#define TPCI200_RECOVER_EN 0x0002 +#define TPCI200_CLK32 0x0001 + +/* reset field in tpci200_regs */ +#define TPCI200_A_RESET 0x0001 +#define TPCI200_B_RESET 0x0002 +#define TPCI200_C_RESET 0x0004 +#define TPCI200_D_RESET 0x0008 + +/* status field in tpci200_regs */ +#define TPCI200_A_TIMEOUT 0x1000 +#define TPCI200_B_TIMEOUT 0x2000 +#define TPCI200_C_TIMEOUT 0x4000 +#define TPCI200_D_TIMEOUT 0x8000 + +#define TPCI200_A_ERROR 0x0100 +#define TPCI200_B_ERROR 0x0200 +#define TPCI200_C_ERROR 0x0400 +#define TPCI200_D_ERROR 0x0800 + +#define TPCI200_A_INT0 0x0001 +#define TPCI200_A_INT1 0x0002 +#define TPCI200_B_INT0 0x0004 +#define TPCI200_B_INT1 0x0008 +#define TPCI200_C_INT0 0x0010 +#define TPCI200_C_INT1 0x0020 +#define TPCI200_D_INT0 0x0040 +#define TPCI200_D_INT1 0x0080 + +#define TPCI200_SLOT_INT_MASK 0x00FF + +/* PCI Configuration registers. The PCI bridge is a PLX Technology PCI9030. */ +#define LAS1_DESC 0x2C +#define LAS2_DESC 0x30 + +/* Bits in the LAS?_DESC registers */ +#define LAS_BIT_BIGENDIAN 24 + +#define VME_IOID_SPACE "IOID" +#define VME_MEM_SPACE "MEM" + +/** + * struct slot_irq - slot IRQ definition. + * @vector Vector number + * @handler Handler called when IRQ arrives + * @arg Handler argument + * + */ +struct slot_irq { + struct ipack_device *holder; + int vector; + irqreturn_t (*handler)(void *); + void *arg; +}; + +/** + * struct tpci200_slot - data specific to the tpci200 slot. + * @slot_id Slot identification gived to external interface + * @irq Slot IRQ infos + * @io_phys IO physical base address register of the slot + * @id_phys ID physical base address register of the slot + * @int_phys INT physical base address register of the slot + * @mem_phys MEM physical base address register of the slot + * + */ +struct tpci200_slot { + struct slot_irq *irq; +}; + +/** + * struct tpci200_infos - informations specific of the TPCI200 tpci200. + * @pci_dev PCI device + * @interface_regs Pointer to IP interface space (Bar 2) + * @ioidint_space Pointer to IP ID, IO and INT space (Bar 3) + * @mem8_space Pointer to MEM space (Bar 4) + * + */ +struct tpci200_infos { + struct pci_dev *pdev; + struct pci_device_id *id_table; + struct tpci200_regs __iomem *interface_regs; + void __iomem *cfg_regs; + struct ipack_bus_device *ipack_bus; +}; +struct tpci200_board { + unsigned int number; + struct mutex mutex; + spinlock_t regs_lock; + struct tpci200_slot *slots; + struct tpci200_infos *info; + phys_addr_t mod_mem[IPACK_SPACE_COUNT]; +}; + +#endif /* _TPCI200_H_ */ -- cgit v1.2.3