From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/leds/flash/leds-rt8515.c | 399 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 399 insertions(+) create mode 100644 drivers/leds/flash/leds-rt8515.c (limited to 'drivers/leds/flash/leds-rt8515.c') diff --git a/drivers/leds/flash/leds-rt8515.c b/drivers/leds/flash/leds-rt8515.c new file mode 100644 index 000000000..44904fdee --- /dev/null +++ b/drivers/leds/flash/leds-rt8515.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * LED driver for Richtek RT8515 flash/torch white LEDs + * found on some Samsung mobile phones. + * + * This is a 1.5A Boost dual channel driver produced around 2011. + * + * The component lacks a datasheet, but in the schematic picture + * from the LG P970 service manual you can see the connections + * from the RT8515 to the LED, with two resistors connected + * from the pins "RFS" and "RTS" to ground. + * + * On the LG P970: + * RFS (resistance flash setting?) is 20 kOhm + * RTS (resistance torch setting?) is 39 kOhm + * + * Some sleuthing finds us the RT9387A which we have a datasheet for: + * https://static5.arrow.com/pdfs/2014/7/27/8/21/12/794/rtt_/manual/94download_ds.jspprt9387a.jspprt9387a.pdf + * This apparently works the same way so in theory this driver + * should cover RT9387A as well. This has not been tested, please + * update the compatibles if you add RT9387A support. + * + * Linus Walleij + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* We can provide 15-700 mA out to the LED */ +#define RT8515_MIN_IOUT_MA 15 +#define RT8515_MAX_IOUT_MA 700 +/* The maximum intensity is 1-16 for flash and 1-100 for torch */ +#define RT8515_FLASH_MAX 16 +#define RT8515_TORCH_MAX 100 + +#define RT8515_TIMEOUT_US 250000U +#define RT8515_MAX_TIMEOUT_US 300000U + +struct rt8515 { + struct led_classdev_flash fled; + struct device *dev; + struct v4l2_flash *v4l2_flash; + struct mutex lock; + struct regulator *reg; + struct gpio_desc *enable_torch; + struct gpio_desc *enable_flash; + struct timer_list powerdown_timer; + u32 max_timeout; /* Flash max timeout */ + int flash_max_intensity; + int torch_max_intensity; +}; + +static struct rt8515 *to_rt8515(struct led_classdev_flash *fled) +{ + return container_of(fled, struct rt8515, fled); +} + +static void rt8515_gpio_led_off(struct rt8515 *rt) +{ + gpiod_set_value(rt->enable_flash, 0); + gpiod_set_value(rt->enable_torch, 0); +} + +static void rt8515_gpio_brightness_commit(struct gpio_desc *gpiod, + int brightness) +{ + int i; + + /* + * Toggling a GPIO line with a small delay increases the + * brightness one step at a time. + */ + for (i = 0; i < brightness; i++) { + gpiod_set_value(gpiod, 0); + udelay(1); + gpiod_set_value(gpiod, 1); + udelay(1); + } +} + +/* This is setting the torch light level */ +static int rt8515_led_brightness_set(struct led_classdev *led, + enum led_brightness brightness) +{ + struct led_classdev_flash *fled = lcdev_to_flcdev(led); + struct rt8515 *rt = to_rt8515(fled); + + mutex_lock(&rt->lock); + + if (brightness == LED_OFF) { + /* Off */ + rt8515_gpio_led_off(rt); + } else if (brightness < RT8515_TORCH_MAX) { + /* Step it up to movie mode brightness using the flash pin */ + rt8515_gpio_brightness_commit(rt->enable_torch, brightness); + } else { + /* Max torch brightness requested */ + gpiod_set_value(rt->enable_torch, 1); + } + + mutex_unlock(&rt->lock); + + return 0; +} + +static int rt8515_led_flash_strobe_set(struct led_classdev_flash *fled, + bool state) +{ + struct rt8515 *rt = to_rt8515(fled); + struct led_flash_setting *timeout = &fled->timeout; + int brightness = rt->flash_max_intensity; + + mutex_lock(&rt->lock); + + if (state) { + /* Enable LED flash mode and set brightness */ + rt8515_gpio_brightness_commit(rt->enable_flash, brightness); + /* Set timeout */ + mod_timer(&rt->powerdown_timer, + jiffies + usecs_to_jiffies(timeout->val)); + } else { + del_timer_sync(&rt->powerdown_timer); + /* Turn the LED off */ + rt8515_gpio_led_off(rt); + } + + fled->led_cdev.brightness = LED_OFF; + /* After this the torch LED will be disabled */ + + mutex_unlock(&rt->lock); + + return 0; +} + +static int rt8515_led_flash_strobe_get(struct led_classdev_flash *fled, + bool *state) +{ + struct rt8515 *rt = to_rt8515(fled); + + *state = timer_pending(&rt->powerdown_timer); + + return 0; +} + +static int rt8515_led_flash_timeout_set(struct led_classdev_flash *fled, + u32 timeout) +{ + /* The timeout is stored in the led-class-flash core */ + return 0; +} + +static const struct led_flash_ops rt8515_flash_ops = { + .strobe_set = rt8515_led_flash_strobe_set, + .strobe_get = rt8515_led_flash_strobe_get, + .timeout_set = rt8515_led_flash_timeout_set, +}; + +static void rt8515_powerdown_timer(struct timer_list *t) +{ + struct rt8515 *rt = from_timer(rt, t, powerdown_timer); + + /* Turn the LED off */ + rt8515_gpio_led_off(rt); +} + +static void rt8515_init_flash_timeout(struct rt8515 *rt) +{ + struct led_classdev_flash *fled = &rt->fled; + struct led_flash_setting *s; + + /* Init flash timeout setting */ + s = &fled->timeout; + s->min = 1; + s->max = rt->max_timeout; + s->step = 1; + /* + * Set default timeout to RT8515_TIMEOUT_US except if + * max_timeout from DT is lower. + */ + s->val = min(rt->max_timeout, RT8515_TIMEOUT_US); +} + +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) +/* Configure the V2L2 flash subdevice */ +static void rt8515_init_v4l2_flash_config(struct rt8515 *rt, + struct v4l2_flash_config *v4l2_sd_cfg) +{ + struct led_classdev *led = &rt->fled.led_cdev; + struct led_flash_setting *s; + + strscpy(v4l2_sd_cfg->dev_name, led->dev->kobj.name, + sizeof(v4l2_sd_cfg->dev_name)); + + /* + * Init flash intensity setting: this is a linear scale + * capped from the device tree max intensity setting + * 1..flash_max_intensity + */ + s = &v4l2_sd_cfg->intensity; + s->min = 1; + s->max = rt->flash_max_intensity; + s->step = 1; + s->val = s->max; +} + +static void rt8515_v4l2_flash_release(struct rt8515 *rt) +{ + v4l2_flash_release(rt->v4l2_flash); +} + +#else +static void rt8515_init_v4l2_flash_config(struct rt8515 *rt, + struct v4l2_flash_config *v4l2_sd_cfg) +{ +} + +static void rt8515_v4l2_flash_release(struct rt8515 *rt) +{ +} +#endif + +static void rt8515_determine_max_intensity(struct rt8515 *rt, + struct fwnode_handle *led, + const char *resistance, + const char *max_ua_prop, int hw_max, + int *max_intensity_setting) +{ + u32 res = 0; /* Can't be 0 so 0 is undefined */ + u32 ua; + u32 max_ma; + int max_intensity; + int ret; + + fwnode_property_read_u32(rt->dev->fwnode, resistance, &res); + ret = fwnode_property_read_u32(led, max_ua_prop, &ua); + + /* Missing info in DT, OK go with hardware maxima */ + if (ret || res == 0) { + dev_err(rt->dev, + "either %s or %s missing from DT, using HW max\n", + resistance, max_ua_prop); + max_ma = RT8515_MAX_IOUT_MA; + max_intensity = hw_max; + goto out_assign_max; + } + + /* + * Formula from the datasheet, this is the maximum current + * defined by the hardware. + */ + max_ma = (5500 * 1000) / res; + /* + * Calculate max intensity (linear scaling) + * Formula is ((ua / 1000) / max_ma) * 100, then simplified + */ + max_intensity = (ua / 10) / max_ma; + + dev_info(rt->dev, + "current restricted from %u to %u mA, max intensity %d/100\n", + max_ma, (ua / 1000), max_intensity); + +out_assign_max: + dev_info(rt->dev, "max intensity %d/%d = %d mA\n", + max_intensity, hw_max, max_ma); + *max_intensity_setting = max_intensity; +} + +static int rt8515_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct fwnode_handle *child; + struct rt8515 *rt; + struct led_classdev *led; + struct led_classdev_flash *fled; + struct led_init_data init_data = {}; + struct v4l2_flash_config v4l2_sd_cfg = {}; + int ret; + + rt = devm_kzalloc(dev, sizeof(*rt), GFP_KERNEL); + if (!rt) + return -ENOMEM; + + rt->dev = dev; + fled = &rt->fled; + led = &fled->led_cdev; + + /* ENF - Enable Flash line */ + rt->enable_flash = devm_gpiod_get(dev, "enf", GPIOD_OUT_LOW); + if (IS_ERR(rt->enable_flash)) + return dev_err_probe(dev, PTR_ERR(rt->enable_flash), + "cannot get ENF (enable flash) GPIO\n"); + + /* ENT - Enable Torch line */ + rt->enable_torch = devm_gpiod_get(dev, "ent", GPIOD_OUT_LOW); + if (IS_ERR(rt->enable_torch)) + return dev_err_probe(dev, PTR_ERR(rt->enable_torch), + "cannot get ENT (enable torch) GPIO\n"); + + child = fwnode_get_next_available_child_node(dev->fwnode, NULL); + if (!child) { + dev_err(dev, + "No fwnode child node found for connected LED.\n"); + return -EINVAL; + } + init_data.fwnode = child; + + rt8515_determine_max_intensity(rt, child, "richtek,rfs-ohms", + "flash-max-microamp", + RT8515_FLASH_MAX, + &rt->flash_max_intensity); + rt8515_determine_max_intensity(rt, child, "richtek,rts-ohms", + "led-max-microamp", + RT8515_TORCH_MAX, + &rt->torch_max_intensity); + + ret = fwnode_property_read_u32(child, "flash-max-timeout-us", + &rt->max_timeout); + if (ret) { + rt->max_timeout = RT8515_MAX_TIMEOUT_US; + dev_warn(dev, + "flash-max-timeout-us property missing\n"); + } + timer_setup(&rt->powerdown_timer, rt8515_powerdown_timer, 0); + rt8515_init_flash_timeout(rt); + + fled->ops = &rt8515_flash_ops; + + led->max_brightness = rt->torch_max_intensity; + led->brightness_set_blocking = rt8515_led_brightness_set; + led->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH; + + mutex_init(&rt->lock); + + platform_set_drvdata(pdev, rt); + + ret = devm_led_classdev_flash_register_ext(dev, fled, &init_data); + if (ret) { + fwnode_handle_put(child); + mutex_destroy(&rt->lock); + dev_err(dev, "can't register LED %s\n", led->name); + return ret; + } + + rt8515_init_v4l2_flash_config(rt, &v4l2_sd_cfg); + + /* Create a V4L2 Flash device if V4L2 flash is enabled */ + rt->v4l2_flash = v4l2_flash_init(dev, child, fled, NULL, &v4l2_sd_cfg); + if (IS_ERR(rt->v4l2_flash)) { + ret = PTR_ERR(rt->v4l2_flash); + dev_err(dev, "failed to register V4L2 flash device (%d)\n", + ret); + /* + * Continue without the V4L2 flash + * (we still have the classdev) + */ + } + + fwnode_handle_put(child); + return 0; +} + +static int rt8515_remove(struct platform_device *pdev) +{ + struct rt8515 *rt = platform_get_drvdata(pdev); + + rt8515_v4l2_flash_release(rt); + del_timer_sync(&rt->powerdown_timer); + mutex_destroy(&rt->lock); + + return 0; +} + +static const struct of_device_id rt8515_match[] = { + { .compatible = "richtek,rt8515", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rt8515_match); + +static struct platform_driver rt8515_driver = { + .driver = { + .name = "rt8515", + .of_match_table = rt8515_match, + }, + .probe = rt8515_probe, + .remove = rt8515_remove, +}; +module_platform_driver(rt8515_driver); + +MODULE_AUTHOR("Linus Walleij "); +MODULE_DESCRIPTION("Richtek RT8515 LED driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3