From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/leds/leds-is31fl32xx.c | 501 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 501 insertions(+) create mode 100644 drivers/leds/leds-is31fl32xx.c (limited to 'drivers/leds/leds-is31fl32xx.c') diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c new file mode 100644 index 000000000..0d219c1ac --- /dev/null +++ b/drivers/leds/leds-is31fl32xx.c @@ -0,0 +1,501 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for ISSI IS31FL32xx family of I2C LED controllers + * + * Copyright 2015 Allworx Corp. + * + * Datasheets: + * http://www.issi.com/US/product-analog-fxled-driver.shtml + * http://www.si-en.com/product.asp?parentid=890 + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Used to indicate a device has no such register */ +#define IS31FL32XX_REG_NONE 0xFF + +/* Software Shutdown bit in Shutdown Register */ +#define IS31FL32XX_SHUTDOWN_SSD_ENABLE 0 +#define IS31FL32XX_SHUTDOWN_SSD_DISABLE BIT(0) + +/* IS31FL3216 has a number of unique registers */ +#define IS31FL3216_CONFIG_REG 0x00 +#define IS31FL3216_LIGHTING_EFFECT_REG 0x03 +#define IS31FL3216_CHANNEL_CONFIG_REG 0x04 + +/* Software Shutdown bit in 3216 Config Register */ +#define IS31FL3216_CONFIG_SSD_ENABLE BIT(7) +#define IS31FL3216_CONFIG_SSD_DISABLE 0 + +struct is31fl32xx_priv; +struct is31fl32xx_led_data { + struct led_classdev cdev; + u8 channel; /* 1-based, max priv->cdef->channels */ + struct is31fl32xx_priv *priv; +}; + +struct is31fl32xx_priv { + const struct is31fl32xx_chipdef *cdef; + struct i2c_client *client; + unsigned int num_leds; + struct is31fl32xx_led_data leds[]; +}; + +/** + * struct is31fl32xx_chipdef - chip-specific attributes + * @channels : Number of LED channels + * @shutdown_reg : address of Shutdown register (optional) + * @pwm_update_reg : address of PWM Update register + * @global_control_reg : address of Global Control register (optional) + * @reset_reg : address of Reset register (optional) + * @pwm_register_base : address of first PWM register + * @pwm_registers_reversed: : true if PWM registers count down instead of up + * @led_control_register_base : address of first LED control register (optional) + * @enable_bits_per_led_control_register: number of LEDs enable bits in each + * @reset_func : pointer to reset function + * @sw_shutdown_func : pointer to software shutdown function + * + * For all optional register addresses, the sentinel value %IS31FL32XX_REG_NONE + * indicates that this chip has no such register. + * + * If non-NULL, @reset_func will be called during probing to set all + * necessary registers to a known initialization state. This is needed + * for chips that do not have a @reset_reg. + * + * @enable_bits_per_led_control_register must be >=1 if + * @led_control_register_base != %IS31FL32XX_REG_NONE. + */ +struct is31fl32xx_chipdef { + u8 channels; + u8 shutdown_reg; + u8 pwm_update_reg; + u8 global_control_reg; + u8 reset_reg; + u8 pwm_register_base; + bool pwm_registers_reversed; + u8 led_control_register_base; + u8 enable_bits_per_led_control_register; + int (*reset_func)(struct is31fl32xx_priv *priv); + int (*sw_shutdown_func)(struct is31fl32xx_priv *priv, bool enable); +}; + +static const struct is31fl32xx_chipdef is31fl3236_cdef = { + .channels = 36, + .shutdown_reg = 0x00, + .pwm_update_reg = 0x25, + .global_control_reg = 0x4a, + .reset_reg = 0x4f, + .pwm_register_base = 0x01, + .led_control_register_base = 0x26, + .enable_bits_per_led_control_register = 1, +}; + +static const struct is31fl32xx_chipdef is31fl3235_cdef = { + .channels = 28, + .shutdown_reg = 0x00, + .pwm_update_reg = 0x25, + .global_control_reg = 0x4a, + .reset_reg = 0x4f, + .pwm_register_base = 0x05, + .led_control_register_base = 0x2a, + .enable_bits_per_led_control_register = 1, +}; + +static const struct is31fl32xx_chipdef is31fl3218_cdef = { + .channels = 18, + .shutdown_reg = 0x00, + .pwm_update_reg = 0x16, + .global_control_reg = IS31FL32XX_REG_NONE, + .reset_reg = 0x17, + .pwm_register_base = 0x01, + .led_control_register_base = 0x13, + .enable_bits_per_led_control_register = 6, +}; + +static int is31fl3216_reset(struct is31fl32xx_priv *priv); +static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv, + bool enable); +static const struct is31fl32xx_chipdef is31fl3216_cdef = { + .channels = 16, + .shutdown_reg = IS31FL32XX_REG_NONE, + .pwm_update_reg = 0xB0, + .global_control_reg = IS31FL32XX_REG_NONE, + .reset_reg = IS31FL32XX_REG_NONE, + .pwm_register_base = 0x10, + .pwm_registers_reversed = true, + .led_control_register_base = 0x01, + .enable_bits_per_led_control_register = 8, + .reset_func = is31fl3216_reset, + .sw_shutdown_func = is31fl3216_software_shutdown, +}; + +static int is31fl32xx_write(struct is31fl32xx_priv *priv, u8 reg, u8 val) +{ + int ret; + + dev_dbg(&priv->client->dev, "writing register 0x%02X=0x%02X", reg, val); + + ret = i2c_smbus_write_byte_data(priv->client, reg, val); + if (ret) { + dev_err(&priv->client->dev, + "register write to 0x%02X failed (error %d)", + reg, ret); + } + return ret; +} + +/* + * Custom reset function for IS31FL3216 because it does not have a RESET + * register the way that the other IS31FL32xx chips do. We don't bother + * writing the GPIO and animation registers, because the registers we + * do write ensure those will have no effect. + */ +static int is31fl3216_reset(struct is31fl32xx_priv *priv) +{ + unsigned int i; + int ret; + + ret = is31fl32xx_write(priv, IS31FL3216_CONFIG_REG, + IS31FL3216_CONFIG_SSD_ENABLE); + if (ret) + return ret; + for (i = 0; i < priv->cdef->channels; i++) { + ret = is31fl32xx_write(priv, priv->cdef->pwm_register_base+i, + 0x00); + if (ret) + return ret; + } + ret = is31fl32xx_write(priv, priv->cdef->pwm_update_reg, 0); + if (ret) + return ret; + ret = is31fl32xx_write(priv, IS31FL3216_LIGHTING_EFFECT_REG, 0x00); + if (ret) + return ret; + ret = is31fl32xx_write(priv, IS31FL3216_CHANNEL_CONFIG_REG, 0x00); + if (ret) + return ret; + + return 0; +} + +/* + * Custom Software-Shutdown function for IS31FL3216 because it does not have + * a SHUTDOWN register the way that the other IS31FL32xx chips do. + * We don't bother doing a read/modify/write on the CONFIG register because + * we only ever use a value of '0' for the other fields in that register. + */ +static int is31fl3216_software_shutdown(struct is31fl32xx_priv *priv, + bool enable) +{ + u8 value = enable ? IS31FL3216_CONFIG_SSD_ENABLE : + IS31FL3216_CONFIG_SSD_DISABLE; + + return is31fl32xx_write(priv, IS31FL3216_CONFIG_REG, value); +} + +/* + * NOTE: A mutex is not needed in this function because: + * - All referenced data is read-only after probe() + * - The I2C core has a mutex on to protect the bus + * - There are no read/modify/write operations + * - Intervening operations between the write of the PWM register + * and the Update register are harmless. + * + * Example: + * PWM_REG_1 write 16 + * UPDATE_REG write 0 + * PWM_REG_2 write 128 + * UPDATE_REG write 0 + * vs: + * PWM_REG_1 write 16 + * PWM_REG_2 write 128 + * UPDATE_REG write 0 + * UPDATE_REG write 0 + * are equivalent. Poking the Update register merely applies all PWM + * register writes up to that point. + */ +static int is31fl32xx_brightness_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + const struct is31fl32xx_led_data *led_data = + container_of(led_cdev, struct is31fl32xx_led_data, cdev); + const struct is31fl32xx_chipdef *cdef = led_data->priv->cdef; + u8 pwm_register_offset; + int ret; + + dev_dbg(led_cdev->dev, "%s: %d\n", __func__, brightness); + + /* NOTE: led_data->channel is 1-based */ + if (cdef->pwm_registers_reversed) + pwm_register_offset = cdef->channels - led_data->channel; + else + pwm_register_offset = led_data->channel - 1; + + ret = is31fl32xx_write(led_data->priv, + cdef->pwm_register_base + pwm_register_offset, + brightness); + if (ret) + return ret; + + return is31fl32xx_write(led_data->priv, cdef->pwm_update_reg, 0); +} + +static int is31fl32xx_reset_regs(struct is31fl32xx_priv *priv) +{ + const struct is31fl32xx_chipdef *cdef = priv->cdef; + int ret; + + if (cdef->reset_reg != IS31FL32XX_REG_NONE) { + ret = is31fl32xx_write(priv, cdef->reset_reg, 0); + if (ret) + return ret; + } + + if (cdef->reset_func) + return cdef->reset_func(priv); + + return 0; +} + +static int is31fl32xx_software_shutdown(struct is31fl32xx_priv *priv, + bool enable) +{ + const struct is31fl32xx_chipdef *cdef = priv->cdef; + int ret; + + if (cdef->shutdown_reg != IS31FL32XX_REG_NONE) { + u8 value = enable ? IS31FL32XX_SHUTDOWN_SSD_ENABLE : + IS31FL32XX_SHUTDOWN_SSD_DISABLE; + ret = is31fl32xx_write(priv, cdef->shutdown_reg, value); + if (ret) + return ret; + } + + if (cdef->sw_shutdown_func) + return cdef->sw_shutdown_func(priv, enable); + + return 0; +} + +static int is31fl32xx_init_regs(struct is31fl32xx_priv *priv) +{ + const struct is31fl32xx_chipdef *cdef = priv->cdef; + int ret; + + ret = is31fl32xx_reset_regs(priv); + if (ret) + return ret; + + /* + * Set enable bit for all channels. + * We will control state with PWM registers alone. + */ + if (cdef->led_control_register_base != IS31FL32XX_REG_NONE) { + u8 value = + GENMASK(cdef->enable_bits_per_led_control_register-1, 0); + u8 num_regs = cdef->channels / + cdef->enable_bits_per_led_control_register; + int i; + + for (i = 0; i < num_regs; i++) { + ret = is31fl32xx_write(priv, + cdef->led_control_register_base+i, + value); + if (ret) + return ret; + } + } + + ret = is31fl32xx_software_shutdown(priv, false); + if (ret) + return ret; + + if (cdef->global_control_reg != IS31FL32XX_REG_NONE) { + ret = is31fl32xx_write(priv, cdef->global_control_reg, 0x00); + if (ret) + return ret; + } + + return 0; +} + +static int is31fl32xx_parse_child_dt(const struct device *dev, + const struct device_node *child, + struct is31fl32xx_led_data *led_data) +{ + struct led_classdev *cdev = &led_data->cdev; + int ret = 0; + u32 reg; + + ret = of_property_read_u32(child, "reg", ®); + if (ret || reg < 1 || reg > led_data->priv->cdef->channels) { + dev_err(dev, + "Child node %pOF does not have a valid reg property\n", + child); + return -EINVAL; + } + led_data->channel = reg; + + cdev->brightness_set_blocking = is31fl32xx_brightness_set; + + return 0; +} + +static struct is31fl32xx_led_data *is31fl32xx_find_led_data( + struct is31fl32xx_priv *priv, + u8 channel) +{ + size_t i; + + for (i = 0; i < priv->num_leds; i++) { + if (priv->leds[i].channel == channel) + return &priv->leds[i]; + } + + return NULL; +} + +static int is31fl32xx_parse_dt(struct device *dev, + struct is31fl32xx_priv *priv) +{ + struct device_node *child; + int ret = 0; + + for_each_available_child_of_node(dev_of_node(dev), child) { + struct led_init_data init_data = {}; + struct is31fl32xx_led_data *led_data = + &priv->leds[priv->num_leds]; + const struct is31fl32xx_led_data *other_led_data; + + led_data->priv = priv; + + ret = is31fl32xx_parse_child_dt(dev, child, led_data); + if (ret) + goto err; + + /* Detect if channel is already in use by another child */ + other_led_data = is31fl32xx_find_led_data(priv, + led_data->channel); + if (other_led_data) { + dev_err(dev, + "Node %pOF 'reg' conflicts with another LED\n", + child); + ret = -EINVAL; + goto err; + } + + init_data.fwnode = of_fwnode_handle(child); + + ret = devm_led_classdev_register_ext(dev, &led_data->cdev, + &init_data); + if (ret) { + dev_err(dev, "Failed to register LED for %pOF: %d\n", + child, ret); + goto err; + } + + priv->num_leds++; + } + + return 0; + +err: + of_node_put(child); + return ret; +} + +static const struct of_device_id of_is31fl32xx_match[] = { + { .compatible = "issi,is31fl3236", .data = &is31fl3236_cdef, }, + { .compatible = "issi,is31fl3235", .data = &is31fl3235_cdef, }, + { .compatible = "issi,is31fl3218", .data = &is31fl3218_cdef, }, + { .compatible = "si-en,sn3218", .data = &is31fl3218_cdef, }, + { .compatible = "issi,is31fl3216", .data = &is31fl3216_cdef, }, + { .compatible = "si-en,sn3216", .data = &is31fl3216_cdef, }, + {}, +}; + +MODULE_DEVICE_TABLE(of, of_is31fl32xx_match); + +static int is31fl32xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct is31fl32xx_chipdef *cdef; + struct device *dev = &client->dev; + struct is31fl32xx_priv *priv; + int count; + int ret = 0; + + cdef = device_get_match_data(dev); + + count = of_get_available_child_count(dev_of_node(dev)); + if (!count) + return -EINVAL; + + priv = devm_kzalloc(dev, struct_size(priv, leds, count), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + priv->cdef = cdef; + i2c_set_clientdata(client, priv); + + ret = is31fl32xx_init_regs(priv); + if (ret) + return ret; + + ret = is31fl32xx_parse_dt(dev, priv); + if (ret) + return ret; + + return 0; +} + +static void is31fl32xx_remove(struct i2c_client *client) +{ + struct is31fl32xx_priv *priv = i2c_get_clientdata(client); + int ret; + + ret = is31fl32xx_reset_regs(priv); + if (ret) + dev_err(&client->dev, "Failed to reset registers on removal (%pe)\n", + ERR_PTR(ret)); +} + +/* + * i2c-core (and modalias) requires that id_table be properly filled, + * even though it is not used for DeviceTree based instantiation. + */ +static const struct i2c_device_id is31fl32xx_id[] = { + { "is31fl3236" }, + { "is31fl3235" }, + { "is31fl3218" }, + { "sn3218" }, + { "is31fl3216" }, + { "sn3216" }, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, is31fl32xx_id); + +static struct i2c_driver is31fl32xx_driver = { + .driver = { + .name = "is31fl32xx", + .of_match_table = of_is31fl32xx_match, + }, + .probe = is31fl32xx_probe, + .remove = is31fl32xx_remove, + .id_table = is31fl32xx_id, +}; + +module_i2c_driver(is31fl32xx_driver); + +MODULE_AUTHOR("David Rivshin "); +MODULE_DESCRIPTION("ISSI IS31FL32xx LED driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3