From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/leds/leds-lp3952.c | 286 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 286 insertions(+) create mode 100644 drivers/leds/leds-lp3952.c (limited to 'drivers/leds/leds-lp3952.c') diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c new file mode 100644 index 000000000..bf0ad1b5c --- /dev/null +++ b/drivers/leds/leds-lp3952.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LED driver for TI lp3952 controller + * + * Copyright (C) 2016, DAQRI, LLC. + * Author: Tony Makkiel + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int lp3952_register_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret; + struct lp3952_led_array *priv = i2c_get_clientdata(client); + + ret = regmap_write(priv->regmap, reg, val); + + if (ret) + dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n", + __func__, reg, val, ret); + return ret; +} + +static void lp3952_on_off(struct lp3952_led_array *priv, + enum lp3952_leds led_id, bool on) +{ + int ret, val; + + dev_dbg(&priv->client->dev, "%s LED %d to %d\n", __func__, led_id, on); + + val = 1 << led_id; + if (led_id == LP3952_LED_ALL) + val = LP3952_LED_MASK_ALL; + + ret = regmap_update_bits(priv->regmap, LP3952_REG_LED_CTRL, val, + on ? val : 0); + if (ret) + dev_err(&priv->client->dev, "%s, Error %d\n", __func__, ret); +} + +/* + * Using Imax to control brightness. There are 4 possible + * setting 25, 50, 75 and 100 % of Imax. Possible values are + * values 0-4. 0 meaning turn off. + */ +static int lp3952_set_brightness(struct led_classdev *cdev, + enum led_brightness value) +{ + unsigned int reg, shift_val; + struct lp3952_ctrl_hdl *led = container_of(cdev, + struct lp3952_ctrl_hdl, + cdev); + struct lp3952_led_array *priv = (struct lp3952_led_array *)led->priv; + + dev_dbg(cdev->dev, "Brightness request: %d on %d\n", value, + led->channel); + + if (value == LED_OFF) { + lp3952_on_off(priv, led->channel, false); + return 0; + } + + if (led->channel > LP3952_RED_1) { + dev_err(cdev->dev, " %s Invalid LED requested", __func__); + return -EINVAL; + } + + if (led->channel >= LP3952_BLUE_1) { + reg = LP3952_REG_RGB1_MAX_I_CTRL; + shift_val = (led->channel - LP3952_BLUE_1) * 2; + } else { + reg = LP3952_REG_RGB2_MAX_I_CTRL; + shift_val = led->channel * 2; + } + + /* Enable the LED in case it is not enabled already */ + lp3952_on_off(priv, led->channel, true); + + return regmap_update_bits(priv->regmap, reg, 3 << shift_val, + --value << shift_val); +} + +static int lp3952_get_label(struct device *dev, const char *label, char *dest) +{ + int ret; + const char *str; + + ret = device_property_read_string(dev, label, &str); + if (ret) + return ret; + + strncpy(dest, str, LP3952_LABEL_MAX_LEN); + return 0; +} + +static int lp3952_register_led_classdev(struct lp3952_led_array *priv) +{ + int i, acpi_ret, ret = -ENODEV; + static const char *led_name_hdl[LP3952_LED_ALL] = { + "blue2", + "green2", + "red2", + "blue1", + "green1", + "red1" + }; + + for (i = 0; i < LP3952_LED_ALL; i++) { + acpi_ret = lp3952_get_label(&priv->client->dev, led_name_hdl[i], + priv->leds[i].name); + if (acpi_ret) + continue; + + priv->leds[i].cdev.name = priv->leds[i].name; + priv->leds[i].cdev.brightness = LED_OFF; + priv->leds[i].cdev.max_brightness = LP3952_BRIGHT_MAX; + priv->leds[i].cdev.brightness_set_blocking = + lp3952_set_brightness; + priv->leds[i].channel = i; + priv->leds[i].priv = priv; + + ret = devm_led_classdev_register(&priv->client->dev, + &priv->leds[i].cdev); + if (ret < 0) { + dev_err(&priv->client->dev, + "couldn't register LED %s\n", + priv->leds[i].cdev.name); + break; + } + } + return ret; +} + +static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv, + u8 cmd_index, u8 r, u8 g, u8 b, + enum lp3952_tt tt, enum lp3952_cet cet) +{ + int ret; + struct ptrn_gen_cmd line = { + { + { + .r = r, + .g = g, + .b = b, + .cet = cet, + .tt = tt + } + } + }; + + if (cmd_index >= LP3952_CMD_REG_COUNT) + return -EINVAL; + + ret = lp3952_register_write(priv->client, + LP3952_REG_CMD_0 + cmd_index * 2, + line.bytes.msb); + if (ret) + return ret; + + return lp3952_register_write(priv->client, + LP3952_REG_CMD_0 + cmd_index * 2 + 1, + line.bytes.lsb); +} + +static int lp3952_configure(struct lp3952_led_array *priv) +{ + int ret; + + /* Disable any LEDs on from any previous conf. */ + ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL, 0); + if (ret) + return ret; + + /* enable rgb patter, loop */ + ret = lp3952_register_write(priv->client, LP3952_REG_PAT_GEN_CTRL, + LP3952_PATRN_LOOP | LP3952_PATRN_GEN_EN); + if (ret) + return ret; + + /* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */ + ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES, + LP3952_ACTIVE_MODE | LP3952_INT_B00ST_LDR); + if (ret) + return ret; + + /* Set Cmd1 for RGB intensity,cmd and transition time */ + return lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0, + CET197); +} + +static const struct regmap_config lp3952_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, + .cache_type = REGCACHE_RBTREE, +}; + +static int lp3952_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int status; + struct lp3952_led_array *priv; + + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + + priv->enable_gpio = devm_gpiod_get(&client->dev, "nrst", + GPIOD_OUT_HIGH); + if (IS_ERR(priv->enable_gpio)) { + status = PTR_ERR(priv->enable_gpio); + dev_err(&client->dev, "Failed to enable gpio: %d\n", status); + return status; + } + + priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap); + if (IS_ERR(priv->regmap)) { + int err = PTR_ERR(priv->regmap); + + dev_err(&client->dev, "Failed to allocate register map: %d\n", + err); + return err; + } + + i2c_set_clientdata(client, priv); + + status = lp3952_configure(priv); + if (status) { + dev_err(&client->dev, "Probe failed. Device not found (%d)\n", + status); + return status; + } + + status = lp3952_register_led_classdev(priv); + if (status) { + dev_err(&client->dev, "Unable to register led_classdev: %d\n", + status); + return status; + } + + return 0; +} + +static void lp3952_remove(struct i2c_client *client) +{ + struct lp3952_led_array *priv; + + priv = i2c_get_clientdata(client); + lp3952_on_off(priv, LP3952_LED_ALL, false); + gpiod_set_value(priv->enable_gpio, 0); +} + +static const struct i2c_device_id lp3952_id[] = { + {LP3952_NAME, 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, lp3952_id); + +static struct i2c_driver lp3952_i2c_driver = { + .driver = { + .name = LP3952_NAME, + }, + .probe = lp3952_probe, + .remove = lp3952_remove, + .id_table = lp3952_id, +}; + +module_i2c_driver(lp3952_i2c_driver); + +MODULE_AUTHOR("Tony Makkiel "); +MODULE_DESCRIPTION("lp3952 I2C LED controller driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3