From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/leds/leds-netxbig.c | 642 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 642 insertions(+) create mode 100644 drivers/leds/leds-netxbig.c (limited to 'drivers/leds/leds-netxbig.c') diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c new file mode 100644 index 000000000..77213b79f --- /dev/null +++ b/drivers/leds/leds-netxbig.c @@ -0,0 +1,642 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * leds-netxbig.c - Driver for the 2Big and 5Big Network series LEDs + * + * Copyright (C) 2010 LaCie + * + * Author: Simon Guinot + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct netxbig_gpio_ext { + struct gpio_desc **addr; + int num_addr; + struct gpio_desc **data; + int num_data; + struct gpio_desc *enable; +}; + +enum netxbig_led_mode { + NETXBIG_LED_OFF, + NETXBIG_LED_ON, + NETXBIG_LED_SATA, + NETXBIG_LED_TIMER1, + NETXBIG_LED_TIMER2, + NETXBIG_LED_MODE_NUM, +}; + +#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM + +struct netxbig_led_timer { + unsigned long delay_on; + unsigned long delay_off; + enum netxbig_led_mode mode; +}; + +struct netxbig_led { + const char *name; + const char *default_trigger; + int mode_addr; + int *mode_val; + int bright_addr; + int bright_max; +}; + +struct netxbig_led_platform_data { + struct netxbig_gpio_ext *gpio_ext; + struct netxbig_led_timer *timer; + int num_timer; + struct netxbig_led *leds; + int num_leds; +}; + +/* + * GPIO extension bus. + */ + +static DEFINE_SPINLOCK(gpio_ext_lock); + +static void gpio_ext_set_addr(struct netxbig_gpio_ext *gpio_ext, int addr) +{ + int pin; + + for (pin = 0; pin < gpio_ext->num_addr; pin++) + gpiod_set_value(gpio_ext->addr[pin], (addr >> pin) & 1); +} + +static void gpio_ext_set_data(struct netxbig_gpio_ext *gpio_ext, int data) +{ + int pin; + + for (pin = 0; pin < gpio_ext->num_data; pin++) + gpiod_set_value(gpio_ext->data[pin], (data >> pin) & 1); +} + +static void gpio_ext_enable_select(struct netxbig_gpio_ext *gpio_ext) +{ + /* Enable select is done on the raising edge. */ + gpiod_set_value(gpio_ext->enable, 0); + gpiod_set_value(gpio_ext->enable, 1); +} + +static void gpio_ext_set_value(struct netxbig_gpio_ext *gpio_ext, + int addr, int value) +{ + unsigned long flags; + + spin_lock_irqsave(&gpio_ext_lock, flags); + gpio_ext_set_addr(gpio_ext, addr); + gpio_ext_set_data(gpio_ext, value); + gpio_ext_enable_select(gpio_ext); + spin_unlock_irqrestore(&gpio_ext_lock, flags); +} + +/* + * Class LED driver. + */ + +struct netxbig_led_data { + struct netxbig_gpio_ext *gpio_ext; + struct led_classdev cdev; + int mode_addr; + int *mode_val; + int bright_addr; + struct netxbig_led_timer *timer; + int num_timer; + enum netxbig_led_mode mode; + int sata; + spinlock_t lock; +}; + +static int netxbig_led_get_timer_mode(enum netxbig_led_mode *mode, + unsigned long delay_on, + unsigned long delay_off, + struct netxbig_led_timer *timer, + int num_timer) +{ + int i; + + for (i = 0; i < num_timer; i++) { + if (timer[i].delay_on == delay_on && + timer[i].delay_off == delay_off) { + *mode = timer[i].mode; + return 0; + } + } + return -EINVAL; +} + +static int netxbig_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + enum netxbig_led_mode mode; + int mode_val; + int ret; + + /* Look for a LED mode with the requested timer frequency. */ + ret = netxbig_led_get_timer_mode(&mode, *delay_on, *delay_off, + led_dat->timer, led_dat->num_timer); + if (ret < 0) + return ret; + + mode_val = led_dat->mode_val[mode]; + if (mode_val == NETXBIG_LED_INVALID_MODE) + return -EINVAL; + + spin_lock_irq(&led_dat->lock); + + gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); + led_dat->mode = mode; + + spin_unlock_irq(&led_dat->lock); + + return 0; +} + +static void netxbig_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + enum netxbig_led_mode mode; + int mode_val; + int set_brightness = 1; + unsigned long flags; + + spin_lock_irqsave(&led_dat->lock, flags); + + if (value == LED_OFF) { + mode = NETXBIG_LED_OFF; + set_brightness = 0; + } else { + if (led_dat->sata) + mode = NETXBIG_LED_SATA; + else if (led_dat->mode == NETXBIG_LED_OFF) + mode = NETXBIG_LED_ON; + else /* Keep 'timer' mode. */ + mode = led_dat->mode; + } + mode_val = led_dat->mode_val[mode]; + + gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); + led_dat->mode = mode; + /* + * Note that the brightness register is shared between all the + * SATA LEDs. So, change the brightness setting for a single + * SATA LED will affect all the others. + */ + if (set_brightness) + gpio_ext_set_value(led_dat->gpio_ext, + led_dat->bright_addr, value); + + spin_unlock_irqrestore(&led_dat->lock, flags); +} + +static ssize_t sata_store(struct device *dev, + struct device_attribute *attr, + const char *buff, size_t count) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + unsigned long enable; + enum netxbig_led_mode mode; + int mode_val; + int ret; + + ret = kstrtoul(buff, 10, &enable); + if (ret < 0) + return ret; + + enable = !!enable; + + spin_lock_irq(&led_dat->lock); + + if (led_dat->sata == enable) { + ret = count; + goto exit_unlock; + } + + if (led_dat->mode != NETXBIG_LED_ON && + led_dat->mode != NETXBIG_LED_SATA) + mode = led_dat->mode; /* Keep modes 'off' and 'timer'. */ + else if (enable) + mode = NETXBIG_LED_SATA; + else + mode = NETXBIG_LED_ON; + + mode_val = led_dat->mode_val[mode]; + if (mode_val == NETXBIG_LED_INVALID_MODE) { + ret = -EINVAL; + goto exit_unlock; + } + + gpio_ext_set_value(led_dat->gpio_ext, led_dat->mode_addr, mode_val); + led_dat->mode = mode; + led_dat->sata = enable; + + ret = count; + +exit_unlock: + spin_unlock_irq(&led_dat->lock); + + return ret; +} + +static ssize_t sata_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct netxbig_led_data *led_dat = + container_of(led_cdev, struct netxbig_led_data, cdev); + + return sprintf(buf, "%d\n", led_dat->sata); +} + +static DEVICE_ATTR_RW(sata); + +static struct attribute *netxbig_led_attrs[] = { + &dev_attr_sata.attr, + NULL +}; +ATTRIBUTE_GROUPS(netxbig_led); + +static int create_netxbig_led(struct platform_device *pdev, + struct netxbig_led_platform_data *pdata, + struct netxbig_led_data *led_dat, + const struct netxbig_led *template) +{ + spin_lock_init(&led_dat->lock); + led_dat->gpio_ext = pdata->gpio_ext; + led_dat->cdev.name = template->name; + led_dat->cdev.default_trigger = template->default_trigger; + led_dat->cdev.blink_set = netxbig_led_blink_set; + led_dat->cdev.brightness_set = netxbig_led_set; + /* + * Because the GPIO extension bus don't allow to read registers + * value, there is no way to probe the LED initial state. + * So, the initial sysfs LED value for the "brightness" and "sata" + * attributes are inconsistent. + * + * Note that the initial LED state can't be reconfigured. + * The reason is that the LED behaviour must stay uniform during + * the whole boot process (bootloader+linux). + */ + led_dat->sata = 0; + led_dat->cdev.brightness = LED_OFF; + led_dat->cdev.max_brightness = template->bright_max; + led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + led_dat->mode_addr = template->mode_addr; + led_dat->mode_val = template->mode_val; + led_dat->bright_addr = template->bright_addr; + led_dat->timer = pdata->timer; + led_dat->num_timer = pdata->num_timer; + /* + * If available, expose the SATA activity blink capability through + * a "sata" sysfs attribute. + */ + if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) + led_dat->cdev.groups = netxbig_led_groups; + + return devm_led_classdev_register(&pdev->dev, &led_dat->cdev); +} + +/** + * netxbig_gpio_ext_remove() - Clean up GPIO extension data + * @data: managed resource data to clean up + * + * Since we pick GPIO descriptors from another device than the device our + * driver is probing to, we need to register a specific callback to free + * these up using managed resources. + */ +static void netxbig_gpio_ext_remove(void *data) +{ + struct netxbig_gpio_ext *gpio_ext = data; + int i; + + for (i = 0; i < gpio_ext->num_addr; i++) + gpiod_put(gpio_ext->addr[i]); + for (i = 0; i < gpio_ext->num_data; i++) + gpiod_put(gpio_ext->data[i]); + gpiod_put(gpio_ext->enable); +} + +/** + * netxbig_gpio_ext_get() - Obtain GPIO extension device data + * @dev: main LED device + * @gpio_ext_dev: the GPIO extension device + * @gpio_ext: the data structure holding the GPIO extension data + * + * This function walks the subdevice that only contain GPIO line + * handles in the device tree and obtains the GPIO descriptors from that + * device. + */ +static int netxbig_gpio_ext_get(struct device *dev, + struct device *gpio_ext_dev, + struct netxbig_gpio_ext *gpio_ext) +{ + struct gpio_desc **addr, **data; + int num_addr, num_data; + struct gpio_desc *gpiod; + int ret; + int i; + + ret = gpiod_count(gpio_ext_dev, "addr"); + if (ret < 0) { + dev_err(dev, + "Failed to count GPIOs in DT property addr-gpios\n"); + return ret; + } + num_addr = ret; + addr = devm_kcalloc(dev, num_addr, sizeof(*addr), GFP_KERNEL); + if (!addr) + return -ENOMEM; + + /* + * We cannot use devm_ managed resources with these GPIO descriptors + * since they are associated with the "GPIO extension device" which + * does not probe any driver. The device tree parser will however + * populate a platform device for it so we can anyway obtain the + * GPIO descriptors from the device. + */ + for (i = 0; i < num_addr; i++) { + gpiod = gpiod_get_index(gpio_ext_dev, "addr", i, + GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + gpiod_set_consumer_name(gpiod, "GPIO extension addr"); + addr[i] = gpiod; + } + gpio_ext->addr = addr; + gpio_ext->num_addr = num_addr; + + ret = gpiod_count(gpio_ext_dev, "data"); + if (ret < 0) { + dev_err(dev, + "Failed to count GPIOs in DT property data-gpios\n"); + return ret; + } + num_data = ret; + data = devm_kcalloc(dev, num_data, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + for (i = 0; i < num_data; i++) { + gpiod = gpiod_get_index(gpio_ext_dev, "data", i, + GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + gpiod_set_consumer_name(gpiod, "GPIO extension data"); + data[i] = gpiod; + } + gpio_ext->data = data; + gpio_ext->num_data = num_data; + + gpiod = gpiod_get(gpio_ext_dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) { + dev_err(dev, + "Failed to get GPIO from DT property enable-gpio\n"); + return PTR_ERR(gpiod); + } + gpiod_set_consumer_name(gpiod, "GPIO extension enable"); + gpio_ext->enable = gpiod; + + return devm_add_action_or_reset(dev, netxbig_gpio_ext_remove, gpio_ext); +} + +static int netxbig_leds_get_of_pdata(struct device *dev, + struct netxbig_led_platform_data *pdata) +{ + struct device_node *np = dev_of_node(dev); + struct device_node *gpio_ext_np; + struct platform_device *gpio_ext_pdev; + struct device *gpio_ext_dev; + struct device_node *child; + struct netxbig_gpio_ext *gpio_ext; + struct netxbig_led_timer *timers; + struct netxbig_led *leds, *led; + int num_timers; + int num_leds = 0; + int ret; + int i; + + /* GPIO extension */ + gpio_ext_np = of_parse_phandle(np, "gpio-ext", 0); + if (!gpio_ext_np) { + dev_err(dev, "Failed to get DT handle gpio-ext\n"); + return -EINVAL; + } + gpio_ext_pdev = of_find_device_by_node(gpio_ext_np); + if (!gpio_ext_pdev) { + dev_err(dev, "Failed to find platform device for gpio-ext\n"); + return -ENODEV; + } + gpio_ext_dev = &gpio_ext_pdev->dev; + + gpio_ext = devm_kzalloc(dev, sizeof(*gpio_ext), GFP_KERNEL); + if (!gpio_ext) { + of_node_put(gpio_ext_np); + ret = -ENOMEM; + goto put_device; + } + ret = netxbig_gpio_ext_get(dev, gpio_ext_dev, gpio_ext); + of_node_put(gpio_ext_np); + if (ret) + goto put_device; + pdata->gpio_ext = gpio_ext; + + /* Timers (optional) */ + ret = of_property_count_u32_elems(np, "timers"); + if (ret > 0) { + if (ret % 3) { + ret = -EINVAL; + goto put_device; + } + + num_timers = ret / 3; + timers = devm_kcalloc(dev, num_timers, sizeof(*timers), + GFP_KERNEL); + if (!timers) { + ret = -ENOMEM; + goto put_device; + } + for (i = 0; i < num_timers; i++) { + u32 tmp; + + of_property_read_u32_index(np, "timers", 3 * i, + &timers[i].mode); + if (timers[i].mode >= NETXBIG_LED_MODE_NUM) { + ret = -EINVAL; + goto put_device; + } + of_property_read_u32_index(np, "timers", + 3 * i + 1, &tmp); + timers[i].delay_on = tmp; + of_property_read_u32_index(np, "timers", + 3 * i + 2, &tmp); + timers[i].delay_off = tmp; + } + pdata->timer = timers; + pdata->num_timer = num_timers; + } + + /* LEDs */ + num_leds = of_get_available_child_count(np); + if (!num_leds) { + dev_err(dev, "No LED subnodes found in DT\n"); + ret = -ENODEV; + goto put_device; + } + + leds = devm_kcalloc(dev, num_leds, sizeof(*leds), GFP_KERNEL); + if (!leds) { + ret = -ENOMEM; + goto put_device; + } + + led = leds; + for_each_available_child_of_node(np, child) { + const char *string; + int *mode_val; + int num_modes; + + ret = of_property_read_u32(child, "mode-addr", + &led->mode_addr); + if (ret) + goto err_node_put; + + ret = of_property_read_u32(child, "bright-addr", + &led->bright_addr); + if (ret) + goto err_node_put; + + ret = of_property_read_u32(child, "max-brightness", + &led->bright_max); + if (ret) + goto err_node_put; + + mode_val = + devm_kcalloc(dev, + NETXBIG_LED_MODE_NUM, sizeof(*mode_val), + GFP_KERNEL); + if (!mode_val) { + ret = -ENOMEM; + goto err_node_put; + } + + for (i = 0; i < NETXBIG_LED_MODE_NUM; i++) + mode_val[i] = NETXBIG_LED_INVALID_MODE; + + ret = of_property_count_u32_elems(child, "mode-val"); + if (ret < 0 || ret % 2) { + ret = -EINVAL; + goto err_node_put; + } + num_modes = ret / 2; + if (num_modes > NETXBIG_LED_MODE_NUM) { + ret = -EINVAL; + goto err_node_put; + } + + for (i = 0; i < num_modes; i++) { + int mode; + int val; + + of_property_read_u32_index(child, + "mode-val", 2 * i, &mode); + of_property_read_u32_index(child, + "mode-val", 2 * i + 1, &val); + if (mode >= NETXBIG_LED_MODE_NUM) { + ret = -EINVAL; + goto err_node_put; + } + mode_val[mode] = val; + } + led->mode_val = mode_val; + + if (!of_property_read_string(child, "label", &string)) + led->name = string; + else + led->name = child->name; + + if (!of_property_read_string(child, + "linux,default-trigger", &string)) + led->default_trigger = string; + + led++; + } + + pdata->leds = leds; + pdata->num_leds = num_leds; + + return 0; + +err_node_put: + of_node_put(child); +put_device: + put_device(gpio_ext_dev); + return ret; +} + +static const struct of_device_id of_netxbig_leds_match[] = { + { .compatible = "lacie,netxbig-leds", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_netxbig_leds_match); + +static int netxbig_led_probe(struct platform_device *pdev) +{ + struct netxbig_led_platform_data *pdata; + struct netxbig_led_data *leds_data; + int i; + int ret; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + ret = netxbig_leds_get_of_pdata(&pdev->dev, pdata); + if (ret) + return ret; + + leds_data = devm_kcalloc(&pdev->dev, + pdata->num_leds, sizeof(*leds_data), + GFP_KERNEL); + if (!leds_data) + return -ENOMEM; + + for (i = 0; i < pdata->num_leds; i++) { + ret = create_netxbig_led(pdev, pdata, + &leds_data[i], &pdata->leds[i]); + if (ret < 0) + return ret; + } + + return 0; +} + +static struct platform_driver netxbig_led_driver = { + .probe = netxbig_led_probe, + .driver = { + .name = "leds-netxbig", + .of_match_table = of_netxbig_leds_match, + }, +}; + +module_platform_driver(netxbig_led_driver); + +MODULE_AUTHOR("Simon Guinot "); +MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:leds-netxbig"); -- cgit v1.2.3