From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/macintosh/rack-meter.c | 619 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 619 insertions(+) create mode 100644 drivers/macintosh/rack-meter.c (limited to 'drivers/macintosh/rack-meter.c') diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c new file mode 100644 index 000000000..c28893e41 --- /dev/null +++ b/drivers/macintosh/rack-meter.c @@ -0,0 +1,619 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * RackMac vu-meter driver + * + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * Support the CPU-meter LEDs of the Xserve G5 + * + * TODO: Implement PWM to do variable intensity and provide userland + * interface for fun. Also, the CPU-meter could be made nicer by being + * a bit less "immediate" but giving instead a more average load over + * time. Patches welcome :-) + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* Number of samples in a sample buffer */ +#define SAMPLE_COUNT 256 + +/* CPU meter sampling rate in ms */ +#define CPU_SAMPLING_RATE 250 + +struct rackmeter_dma { + struct dbdma_cmd cmd[4] ____cacheline_aligned; + u32 mark ____cacheline_aligned; + u32 buf1[SAMPLE_COUNT] ____cacheline_aligned; + u32 buf2[SAMPLE_COUNT] ____cacheline_aligned; +} ____cacheline_aligned; + +struct rackmeter_cpu { + struct delayed_work sniffer; + struct rackmeter *rm; + u64 prev_wall; + u64 prev_idle; + int zero; +} ____cacheline_aligned; + +struct rackmeter { + struct macio_dev *mdev; + unsigned int irq; + struct device_node *i2s; + u8 *ubuf; + struct dbdma_regs __iomem *dma_regs; + void __iomem *i2s_regs; + dma_addr_t dma_buf_p; + struct rackmeter_dma *dma_buf_v; + int stale_irq; + struct rackmeter_cpu cpu[2]; + int paused; + struct mutex sem; +}; + +/* To be set as a tunable */ +static int rackmeter_ignore_nice; + +/* This GPIO is whacked by the OS X driver when initializing */ +#define RACKMETER_MAGIC_GPIO 0x78 + +/* This is copied from cpufreq_ondemand, maybe we should put it in + * a common header somewhere + */ +static inline u64 get_cpu_idle_time(unsigned int cpu) +{ + struct kernel_cpustat *kcpustat = &kcpustat_cpu(cpu); + u64 retval; + + retval = kcpustat->cpustat[CPUTIME_IDLE] + + kcpustat->cpustat[CPUTIME_IOWAIT]; + + if (rackmeter_ignore_nice) + retval += kcpustat_field(kcpustat, CPUTIME_NICE, cpu); + + return retval; +} + +static void rackmeter_setup_i2s(struct rackmeter *rm) +{ + struct macio_chip *macio = rm->mdev->bus->chip; + + /* First whack magic GPIO */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, RACKMETER_MAGIC_GPIO, 5); + + + /* Call feature code to enable the sound channel and the proper + * clock sources + */ + pmac_call_feature(PMAC_FTR_SOUND_CHIP_ENABLE, rm->i2s, 0, 1); + + /* Power i2s and stop i2s clock. We whack MacIO FCRs directly for now. + * This is a bit racy, thus we should add new platform functions to + * handle that. snd-aoa needs that too + */ + MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_ENABLE); + MACIO_BIC(KEYLARGO_FCR1, KL1_I2S0_CLK_ENABLE_BIT); + (void)MACIO_IN32(KEYLARGO_FCR1); + udelay(10); + + /* Then setup i2s. For now, we use the same magic value that + * the OS X driver seems to use. We might want to play around + * with the clock divisors later + */ + out_le32(rm->i2s_regs + 0x10, 0x01fa0000); + (void)in_le32(rm->i2s_regs + 0x10); + udelay(10); + + /* Fully restart i2s*/ + MACIO_BIS(KEYLARGO_FCR1, KL1_I2S0_CELL_ENABLE | + KL1_I2S0_CLK_ENABLE_BIT); + (void)MACIO_IN32(KEYLARGO_FCR1); + udelay(10); +} + +static void rackmeter_set_default_pattern(struct rackmeter *rm) +{ + int i; + + for (i = 0; i < 16; i++) { + if (i < 8) + rm->ubuf[i] = (i & 1) * 255; + else + rm->ubuf[i] = ((~i) & 1) * 255; + } +} + +static void rackmeter_do_pause(struct rackmeter *rm, int pause) +{ + struct rackmeter_dma *rdma = rm->dma_buf_v; + + pr_debug("rackmeter: %s\n", pause ? "paused" : "started"); + + rm->paused = pause; + if (pause) { + DBDMA_DO_STOP(rm->dma_regs); + return; + } + memset(rdma->buf1, 0, sizeof(rdma->buf1)); + memset(rdma->buf2, 0, sizeof(rdma->buf2)); + + rm->dma_buf_v->mark = 0; + + mb(); + out_le32(&rm->dma_regs->cmdptr_hi, 0); + out_le32(&rm->dma_regs->cmdptr, rm->dma_buf_p); + out_le32(&rm->dma_regs->control, (RUN << 16) | RUN); +} + +static void rackmeter_setup_dbdma(struct rackmeter *rm) +{ + struct rackmeter_dma *db = rm->dma_buf_v; + struct dbdma_cmd *cmd = db->cmd; + + /* Make sure dbdma is reset */ + DBDMA_DO_RESET(rm->dma_regs); + + pr_debug("rackmeter: mark offset=0x%zx\n", + offsetof(struct rackmeter_dma, mark)); + pr_debug("rackmeter: buf1 offset=0x%zx\n", + offsetof(struct rackmeter_dma, buf1)); + pr_debug("rackmeter: buf2 offset=0x%zx\n", + offsetof(struct rackmeter_dma, buf2)); + + /* Prepare 4 dbdma commands for the 2 buffers */ + memset(cmd, 0, 4 * sizeof(struct dbdma_cmd)); + cmd->req_count = cpu_to_le16(4); + cmd->command = cpu_to_le16(STORE_WORD | INTR_ALWAYS | KEY_SYSTEM); + cmd->phy_addr = cpu_to_le32(rm->dma_buf_p + + offsetof(struct rackmeter_dma, mark)); + cmd->cmd_dep = cpu_to_le32(0x02000000); + cmd++; + + cmd->req_count = cpu_to_le16(SAMPLE_COUNT * 4); + cmd->command = cpu_to_le16(OUTPUT_MORE); + cmd->phy_addr = cpu_to_le32(rm->dma_buf_p + + offsetof(struct rackmeter_dma, buf1)); + cmd++; + + cmd->req_count = cpu_to_le16(4); + cmd->command = cpu_to_le16(STORE_WORD | INTR_ALWAYS | KEY_SYSTEM); + cmd->phy_addr = cpu_to_le32(rm->dma_buf_p + + offsetof(struct rackmeter_dma, mark)); + cmd->cmd_dep = cpu_to_le32(0x01000000); + cmd++; + + cmd->req_count = cpu_to_le16(SAMPLE_COUNT * 4); + cmd->command = cpu_to_le16(OUTPUT_MORE | BR_ALWAYS); + cmd->phy_addr = cpu_to_le32(rm->dma_buf_p + + offsetof(struct rackmeter_dma, buf2)); + cmd->cmd_dep = cpu_to_le32(rm->dma_buf_p); + + rackmeter_do_pause(rm, 0); +} + +static void rackmeter_do_timer(struct work_struct *work) +{ + struct rackmeter_cpu *rcpu = + container_of(work, struct rackmeter_cpu, sniffer.work); + struct rackmeter *rm = rcpu->rm; + unsigned int cpu = smp_processor_id(); + u64 cur_nsecs, total_idle_nsecs; + u64 total_nsecs, idle_nsecs; + int i, offset, load, cumm, pause; + + cur_nsecs = jiffies64_to_nsecs(get_jiffies_64()); + total_nsecs = cur_nsecs - rcpu->prev_wall; + rcpu->prev_wall = cur_nsecs; + + total_idle_nsecs = get_cpu_idle_time(cpu); + idle_nsecs = total_idle_nsecs - rcpu->prev_idle; + idle_nsecs = min(idle_nsecs, total_nsecs); + rcpu->prev_idle = total_idle_nsecs; + + /* We do a very dumb calculation to update the LEDs for now, + * we'll do better once we have actual PWM implemented + */ + load = div64_u64(9 * (total_nsecs - idle_nsecs), total_nsecs); + + offset = cpu << 3; + cumm = 0; + for (i = 0; i < 8; i++) { + u8 ub = (load > i) ? 0xff : 0; + rm->ubuf[i + offset] = ub; + cumm |= ub; + } + rcpu->zero = (cumm == 0); + + /* Now check if LEDs are all 0, we can stop DMA */ + pause = (rm->cpu[0].zero && rm->cpu[1].zero); + if (pause != rm->paused) { + mutex_lock(&rm->sem); + pause = (rm->cpu[0].zero && rm->cpu[1].zero); + rackmeter_do_pause(rm, pause); + mutex_unlock(&rm->sem); + } + schedule_delayed_work_on(cpu, &rcpu->sniffer, + msecs_to_jiffies(CPU_SAMPLING_RATE)); +} + +static void rackmeter_init_cpu_sniffer(struct rackmeter *rm) +{ + unsigned int cpu; + + /* This driver works only with 1 or 2 CPUs numbered 0 and 1, + * but that's really all we have on Apple Xserve. It doesn't + * play very nice with CPU hotplug neither but we don't do that + * on those machines yet + */ + + rm->cpu[0].rm = rm; + INIT_DELAYED_WORK(&rm->cpu[0].sniffer, rackmeter_do_timer); + rm->cpu[1].rm = rm; + INIT_DELAYED_WORK(&rm->cpu[1].sniffer, rackmeter_do_timer); + + for_each_online_cpu(cpu) { + struct rackmeter_cpu *rcpu; + + if (cpu > 1) + continue; + rcpu = &rm->cpu[cpu]; + rcpu->prev_idle = get_cpu_idle_time(cpu); + rcpu->prev_wall = jiffies64_to_nsecs(get_jiffies_64()); + schedule_delayed_work_on(cpu, &rm->cpu[cpu].sniffer, + msecs_to_jiffies(CPU_SAMPLING_RATE)); + } +} + +static void rackmeter_stop_cpu_sniffer(struct rackmeter *rm) +{ + cancel_delayed_work_sync(&rm->cpu[0].sniffer); + cancel_delayed_work_sync(&rm->cpu[1].sniffer); +} + +static int rackmeter_setup(struct rackmeter *rm) +{ + pr_debug("rackmeter: setting up i2s..\n"); + rackmeter_setup_i2s(rm); + + pr_debug("rackmeter: setting up default pattern..\n"); + rackmeter_set_default_pattern(rm); + + pr_debug("rackmeter: setting up dbdma..\n"); + rackmeter_setup_dbdma(rm); + + pr_debug("rackmeter: start CPU measurements..\n"); + rackmeter_init_cpu_sniffer(rm); + + printk(KERN_INFO "RackMeter initialized\n"); + + return 0; +} + +/* XXX FIXME: No PWM yet, this is 0/1 */ +static u32 rackmeter_calc_sample(struct rackmeter *rm, unsigned int index) +{ + int led; + u32 sample = 0; + + for (led = 0; led < 16; led++) { + sample >>= 1; + sample |= ((rm->ubuf[led] >= 0x80) << 15); + } + return (sample << 17) | (sample >> 15); +} + +static irqreturn_t rackmeter_irq(int irq, void *arg) +{ + struct rackmeter *rm = arg; + struct rackmeter_dma *db = rm->dma_buf_v; + unsigned int mark, i; + u32 *buf; + + /* Flush PCI buffers with an MMIO read. Maybe we could actually + * check the status one day ... in case things go wrong, though + * this never happened to me + */ + (void)in_le32(&rm->dma_regs->status); + + /* Make sure the CPU gets us in order */ + rmb(); + + /* Read mark */ + mark = db->mark; + if (mark != 1 && mark != 2) { + printk(KERN_WARNING "rackmeter: Incorrect DMA mark 0x%08x\n", + mark); + /* We allow for 3 errors like that (stale DBDMA irqs) */ + if (++rm->stale_irq > 3) { + printk(KERN_ERR "rackmeter: Too many errors," + " stopping DMA\n"); + DBDMA_DO_RESET(rm->dma_regs); + } + return IRQ_HANDLED; + } + + /* Next buffer we need to fill is mark value */ + buf = mark == 1 ? db->buf1 : db->buf2; + + /* Fill it now. This routine converts the 8 bits depth sample array + * into the PWM bitmap for each LED. + */ + for (i = 0; i < SAMPLE_COUNT; i++) + buf[i] = rackmeter_calc_sample(rm, i); + + + return IRQ_HANDLED; +} + +static int rackmeter_probe(struct macio_dev* mdev, + const struct of_device_id *match) +{ + struct device_node *i2s = NULL, *np = NULL; + struct rackmeter *rm = NULL; + struct resource ri2s, rdma; + int rc = -ENODEV; + + pr_debug("rackmeter_probe()\n"); + + /* Get i2s-a node */ + for_each_child_of_node(mdev->ofdev.dev.of_node, i2s) + if (of_node_name_eq(i2s, "i2s-a")) + break; + + if (i2s == NULL) { + pr_debug(" i2s-a child not found\n"); + goto bail; + } + /* Get lightshow or virtual sound */ + for_each_child_of_node(i2s, np) { + if (of_node_name_eq(np, "lightshow")) + break; + if (of_node_name_eq(np, "sound") && + of_get_property(np, "virtual", NULL) != NULL) + break; + } + if (np == NULL) { + pr_debug(" lightshow or sound+virtual child not found\n"); + goto bail; + } + + /* Create and initialize our instance data */ + rm = kzalloc(sizeof(*rm), GFP_KERNEL); + if (rm == NULL) { + printk(KERN_ERR "rackmeter: failed to allocate memory !\n"); + rc = -ENOMEM; + goto bail_release; + } + rm->mdev = mdev; + rm->i2s = i2s; + mutex_init(&rm->sem); + dev_set_drvdata(&mdev->ofdev.dev, rm); + /* Check resources availability. We need at least resource 0 and 1 */ +#if 0 /* Use that when i2s-a is finally an mdev per-se */ + if (macio_resource_count(mdev) < 2 || macio_irq_count(mdev) < 2) { + printk(KERN_ERR + "rackmeter: found match but lacks resources: %pOF" + " (%d resources, %d interrupts)\n", + mdev->ofdev.dev.of_node); + rc = -ENXIO; + goto bail_free; + } + if (macio_request_resources(mdev, "rackmeter")) { + printk(KERN_ERR + "rackmeter: failed to request resources: %pOF\n", + mdev->ofdev.dev.of_node); + rc = -EBUSY; + goto bail_free; + } + rm->irq = macio_irq(mdev, 1); +#else + rm->irq = irq_of_parse_and_map(i2s, 1); + if (!rm->irq || + of_address_to_resource(i2s, 0, &ri2s) || + of_address_to_resource(i2s, 1, &rdma)) { + printk(KERN_ERR + "rackmeter: found match but lacks resources: %pOF", + mdev->ofdev.dev.of_node); + rc = -ENXIO; + goto bail_free; + } +#endif + + pr_debug(" i2s @0x%08x\n", (unsigned int)ri2s.start); + pr_debug(" dma @0x%08x\n", (unsigned int)rdma.start); + pr_debug(" irq %d\n", rm->irq); + + rm->ubuf = (u8 *)__get_free_page(GFP_KERNEL); + if (rm->ubuf == NULL) { + printk(KERN_ERR + "rackmeter: failed to allocate samples page !\n"); + rc = -ENOMEM; + goto bail_release; + } + + rm->dma_buf_v = dma_alloc_coherent(&macio_get_pci_dev(mdev)->dev, + sizeof(struct rackmeter_dma), + &rm->dma_buf_p, GFP_KERNEL); + if (rm->dma_buf_v == NULL) { + printk(KERN_ERR + "rackmeter: failed to allocate dma buffer !\n"); + rc = -ENOMEM; + goto bail_free_samples; + } +#if 0 + rm->i2s_regs = ioremap(macio_resource_start(mdev, 0), 0x1000); +#else + rm->i2s_regs = ioremap(ri2s.start, 0x1000); +#endif + if (rm->i2s_regs == NULL) { + printk(KERN_ERR + "rackmeter: failed to map i2s registers !\n"); + rc = -ENXIO; + goto bail_free_dma; + } +#if 0 + rm->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x100); +#else + rm->dma_regs = ioremap(rdma.start, 0x100); +#endif + if (rm->dma_regs == NULL) { + printk(KERN_ERR + "rackmeter: failed to map dma registers !\n"); + rc = -ENXIO; + goto bail_unmap_i2s; + } + + rc = rackmeter_setup(rm); + if (rc) { + printk(KERN_ERR + "rackmeter: failed to initialize !\n"); + rc = -ENXIO; + goto bail_unmap_dma; + } + + rc = request_irq(rm->irq, rackmeter_irq, 0, "rackmeter", rm); + if (rc != 0) { + printk(KERN_ERR + "rackmeter: failed to request interrupt !\n"); + goto bail_stop_dma; + } + of_node_put(np); + return 0; + + bail_stop_dma: + DBDMA_DO_RESET(rm->dma_regs); + bail_unmap_dma: + iounmap(rm->dma_regs); + bail_unmap_i2s: + iounmap(rm->i2s_regs); + bail_free_dma: + dma_free_coherent(&macio_get_pci_dev(mdev)->dev, + sizeof(struct rackmeter_dma), + rm->dma_buf_v, rm->dma_buf_p); + bail_free_samples: + free_page((unsigned long)rm->ubuf); + bail_release: +#if 0 + macio_release_resources(mdev); +#endif + bail_free: + kfree(rm); + bail: + of_node_put(i2s); + of_node_put(np); + dev_set_drvdata(&mdev->ofdev.dev, NULL); + return rc; +} + +static int rackmeter_remove(struct macio_dev* mdev) +{ + struct rackmeter *rm = dev_get_drvdata(&mdev->ofdev.dev); + + /* Stop CPU sniffer timer & work queues */ + rackmeter_stop_cpu_sniffer(rm); + + /* Clear reference to private data */ + dev_set_drvdata(&mdev->ofdev.dev, NULL); + + /* Stop/reset dbdma */ + DBDMA_DO_RESET(rm->dma_regs); + + /* Release the IRQ */ + free_irq(rm->irq, rm); + + /* Unmap registers */ + iounmap(rm->dma_regs); + iounmap(rm->i2s_regs); + + /* Free DMA */ + dma_free_coherent(&macio_get_pci_dev(mdev)->dev, + sizeof(struct rackmeter_dma), + rm->dma_buf_v, rm->dma_buf_p); + + /* Free samples */ + free_page((unsigned long)rm->ubuf); + +#if 0 + /* Release resources */ + macio_release_resources(mdev); +#endif + + /* Get rid of me */ + kfree(rm); + + return 0; +} + +static int rackmeter_shutdown(struct macio_dev* mdev) +{ + struct rackmeter *rm = dev_get_drvdata(&mdev->ofdev.dev); + + if (rm == NULL) + return -ENODEV; + + /* Stop CPU sniffer timer & work queues */ + rackmeter_stop_cpu_sniffer(rm); + + /* Stop/reset dbdma */ + DBDMA_DO_RESET(rm->dma_regs); + + return 0; +} + +static const struct of_device_id rackmeter_match[] = { + { .name = "i2s" }, + { } +}; +MODULE_DEVICE_TABLE(of, rackmeter_match); + +static struct macio_driver rackmeter_driver = { + .driver = { + .name = "rackmeter", + .owner = THIS_MODULE, + .of_match_table = rackmeter_match, + }, + .probe = rackmeter_probe, + .remove = rackmeter_remove, + .shutdown = rackmeter_shutdown, +}; + + +static int __init rackmeter_init(void) +{ + pr_debug("rackmeter_init()\n"); + + return macio_register_driver(&rackmeter_driver); +} + +static void __exit rackmeter_exit(void) +{ + pr_debug("rackmeter_exit()\n"); + + macio_unregister_driver(&rackmeter_driver); +} + +module_init(rackmeter_init); +module_exit(rackmeter_exit); + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("RackMeter: Support vu-meter on XServe front panel"); -- cgit v1.2.3