From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/macintosh/windfarm_pid.c | 148 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 drivers/macintosh/windfarm_pid.c (limited to 'drivers/macintosh/windfarm_pid.c') diff --git a/drivers/macintosh/windfarm_pid.c b/drivers/macintosh/windfarm_pid.c new file mode 100644 index 000000000..bb31b0e93 --- /dev/null +++ b/drivers/macintosh/windfarm_pid.c @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Windfarm PowerMac thermal control. Generic PID helpers + * + * (c) Copyright 2005 Benjamin Herrenschmidt, IBM Corp. + * + */ + +#include +#include +#include +#include +#include + +#include "windfarm_pid.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(args...) printk(args) +#else +#define DBG(args...) do { } while(0) +#endif + +void wf_pid_init(struct wf_pid_state *st, struct wf_pid_param *param) +{ + memset(st, 0, sizeof(struct wf_pid_state)); + st->param = *param; + st->first = 1; +} +EXPORT_SYMBOL_GPL(wf_pid_init); + +s32 wf_pid_run(struct wf_pid_state *st, s32 new_sample) +{ + s64 error, integ, deriv; + s32 target; + int i, hlen = st->param.history_len; + + /* Calculate error term */ + error = new_sample - st->param.itarget; + + /* Get samples into our history buffer */ + if (st->first) { + for (i = 0; i < hlen; i++) { + st->samples[i] = new_sample; + st->errors[i] = error; + } + st->first = 0; + st->index = 0; + } else { + st->index = (st->index + 1) % hlen; + st->samples[st->index] = new_sample; + st->errors[st->index] = error; + } + + /* Calculate integral term */ + for (i = 0, integ = 0; i < hlen; i++) + integ += st->errors[(st->index + hlen - i) % hlen]; + integ *= st->param.interval; + + /* Calculate derivative term */ + deriv = st->errors[st->index] - + st->errors[(st->index + hlen - 1) % hlen]; + deriv /= st->param.interval; + + /* Calculate target */ + target = (s32)((integ * (s64)st->param.gr + deriv * (s64)st->param.gd + + error * (s64)st->param.gp) >> 36); + if (st->param.additive) + target += st->target; + target = max(target, st->param.min); + target = min(target, st->param.max); + st->target = target; + + return st->target; +} +EXPORT_SYMBOL_GPL(wf_pid_run); + +void wf_cpu_pid_init(struct wf_cpu_pid_state *st, + struct wf_cpu_pid_param *param) +{ + memset(st, 0, sizeof(struct wf_cpu_pid_state)); + st->param = *param; + st->first = 1; +} +EXPORT_SYMBOL_GPL(wf_cpu_pid_init); + +s32 wf_cpu_pid_run(struct wf_cpu_pid_state *st, s32 new_power, s32 new_temp) +{ + s64 integ, deriv, prop; + s32 error, target, sval, adj; + int i, hlen = st->param.history_len; + + /* Calculate error term */ + error = st->param.pmaxadj - new_power; + + /* Get samples into our history buffer */ + if (st->first) { + for (i = 0; i < hlen; i++) { + st->powers[i] = new_power; + st->errors[i] = error; + } + st->temps[0] = st->temps[1] = new_temp; + st->first = 0; + st->index = st->tindex = 0; + } else { + st->index = (st->index + 1) % hlen; + st->powers[st->index] = new_power; + st->errors[st->index] = error; + st->tindex = (st->tindex + 1) % 2; + st->temps[st->tindex] = new_temp; + } + + /* Calculate integral term */ + for (i = 0, integ = 0; i < hlen; i++) + integ += st->errors[(st->index + hlen - i) % hlen]; + integ *= st->param.interval; + integ *= st->param.gr; + sval = st->param.tmax - (s32)(integ >> 20); + adj = min(st->param.ttarget, sval); + + DBG("integ: %lx, sval: %lx, adj: %lx\n", integ, sval, adj); + + /* Calculate derivative term */ + deriv = st->temps[st->tindex] - + st->temps[(st->tindex + 2 - 1) % 2]; + deriv /= st->param.interval; + deriv *= st->param.gd; + + /* Calculate proportional term */ + prop = st->last_delta = (new_temp - adj); + prop *= st->param.gp; + + DBG("deriv: %lx, prop: %lx\n", deriv, prop); + + /* Calculate target */ + target = st->target + (s32)((deriv + prop) >> 36); + target = max(target, st->param.min); + target = min(target, st->param.max); + st->target = target; + + return st->target; +} +EXPORT_SYMBOL_GPL(wf_cpu_pid_run); + +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("PID algorithm for PowerMacs thermal control"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3