From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mailbox/Kconfig | 298 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 298 insertions(+) create mode 100644 drivers/mailbox/Kconfig (limited to 'drivers/mailbox/Kconfig') diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig new file mode 100644 index 000000000..1495965bc --- /dev/null +++ b/drivers/mailbox/Kconfig @@ -0,0 +1,298 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig MAILBOX + bool "Mailbox Hardware Support" + help + Mailbox is a framework to control hardware communication between + on-chip processors through queued messages and interrupt driven + signals. Say Y if your platform supports hardware mailboxes. + +if MAILBOX + +config APPLE_MAILBOX + tristate "Apple Mailbox driver" + depends on ARCH_APPLE || (ARM64 && COMPILE_TEST) + default ARCH_APPLE + help + Apple SoCs have various co-processors required for certain + peripherals to work (NVMe, display controller, etc.). This + driver adds support for the mailbox controller used to + communicate with those. + + Say Y here if you have a Apple SoC. + +config ARM_MHU + tristate "ARM MHU Mailbox" + depends on ARM_AMBA + help + Say Y here if you want to build the ARM MHU controller driver. + The controller has 3 mailbox channels, the last of which can be + used in Secure mode only. + +config ARM_MHU_V2 + tristate "ARM MHUv2 Mailbox" + depends on ARM_AMBA + help + Say Y here if you want to build the ARM MHUv2 controller driver, + which provides unidirectional mailboxes between processing elements. + +config IMX_MBOX + tristate "i.MX Mailbox" + depends on ARCH_MXC || COMPILE_TEST + help + Mailbox implementation for i.MX Messaging Unit (MU). + +config PLATFORM_MHU + tristate "Platform MHU Mailbox" + depends on OF + depends on HAS_IOMEM + help + Say Y here if you want to build a platform specific variant MHU + controller driver. + The controller has a maximum of 3 mailbox channels, the last of + which can be used in Secure mode only. + +config PL320_MBOX + bool "ARM PL320 Mailbox" + depends on ARM_AMBA + help + An implementation of the ARM PL320 Interprocessor Communication + Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to + send short messages between Highbank's A9 cores and the EnergyCore + Management Engine, primarily for cpufreq. Say Y here if you want + to use the PL320 IPCM support. + +config ARMADA_37XX_RWTM_MBOX + tristate "Armada 37xx rWTM BIU Mailbox" + depends on ARCH_MVEBU || COMPILE_TEST + depends on OF + help + Mailbox implementation for communication with the the firmware + running on the Cortex-M3 rWTM secure processor of the Armada 37xx + SOC. Say Y here if you are building for such a device (for example + the Turris Mox router). + +config OMAP2PLUS_MBOX + tristate "OMAP2+ Mailbox framework support" + depends on ARCH_OMAP2PLUS || ARCH_K3 + help + Mailbox implementation for OMAP family chips with hardware for + interprocessor communication involving DSP, IVA1.0 and IVA2 in + OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you + want to use OMAP2+ Mailbox framework support. + +config OMAP_MBOX_KFIFO_SIZE + int "Mailbox kfifo default buffer size (bytes)" + depends on OMAP2PLUS_MBOX + default 256 + help + Specify the default size of mailbox's kfifo buffers (bytes). + This can also be changed at runtime (via the mbox_kfifo_size + module parameter). + +config ROCKCHIP_MBOX + bool "Rockchip Soc Integrated Mailbox Support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + help + This driver provides support for inter-processor communication + between CPU cores and MCU processor on Some Rockchip SOCs. + Please check it that the Soc you use have Mailbox hardware. + Say Y here if you want to use the Rockchip Mailbox support. + +config PCC + bool "Platform Communication Channel Driver" + depends on ACPI + default n + help + ACPI 5.0+ spec defines a generic mode of communication + between the OS and a platform such as the BMC. This medium + (PCC) is typically used by CPPC (ACPI CPU Performance management), + RAS (ACPI reliability protocol) and MPST (ACPI Memory power + states). Select this driver if your platform implements the + PCC clients mentioned above. + +config ALTERA_MBOX + tristate "Altera Mailbox" + depends on HAS_IOMEM + help + An implementation of the Altera Mailbox soft core. It is used + to send message between processors. Say Y here if you want to use the + Altera mailbox support. + +config BCM2835_MBOX + tristate "BCM2835 Mailbox" + depends on ARCH_BCM2835 + help + An implementation of the BCM2385 Mailbox. It is used to invoke + the services of the Videocore. Say Y here if you want to use the + BCM2835 Mailbox. + +config STI_MBOX + tristate "STI Mailbox framework support" + depends on ARCH_STI && OF + help + Mailbox implementation for STMicroelectonics family chips with + hardware for interprocessor communication. + +config TI_MESSAGE_MANAGER + tristate "Texas Instruments Message Manager Driver" + depends on ARCH_KEYSTONE || ARCH_K3 + default ARCH_K3 + help + An implementation of Message Manager slave driver for Keystone + and K3 architecture SoCs from Texas Instruments. Message Manager + is a communication entity found on few of Texas Instrument's keystone + and K3 architecture SoCs. These may be used for communication between + multiple processors within the SoC. Select this driver if your + platform has support for the hardware block. + +config HI3660_MBOX + tristate "Hi3660 Mailbox" if EXPERT + depends on (ARCH_HISI || COMPILE_TEST) + depends on OF + default ARCH_HISI + help + An implementation of the hi3660 mailbox. It is used to send message + between application processors and other processors/MCU/DSP. Select + Y here if you want to use Hi3660 mailbox controller. + +config HI6220_MBOX + tristate "Hi6220 Mailbox" if EXPERT + depends on (ARCH_HISI || COMPILE_TEST) + depends on OF + default ARCH_HISI + help + An implementation of the hi6220 mailbox. It is used to send message + between application processors and MCU. Say Y here if you want to + build Hi6220 mailbox controller driver. + +config MAILBOX_TEST + tristate "Mailbox Test Client" + depends on OF + depends on HAS_IOMEM + help + Test client to help with testing new Controller driver + implementations. + +config POLARFIRE_SOC_MAILBOX + tristate "PolarFire SoC (MPFS) Mailbox" + depends on HAS_IOMEM + depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST + help + This driver adds support for the PolarFire SoC (MPFS) mailbox controller. + + To compile this driver as a module, choose M here. the + module will be called mailbox-mpfs. + + If unsure, say N. + +config QCOM_APCS_IPC + tristate "Qualcomm APCS IPC driver" + depends on ARCH_QCOM || COMPILE_TEST + help + Say y here to enable support for the APCS IPC mailbox driver, + providing an interface for invoking the inter-process communication + signals from the application processor to other masters. + +config TEGRA_HSP_MBOX + bool "Tegra HSP (Hardware Synchronization Primitives) Driver" + depends on ARCH_TEGRA + help + The Tegra HSP driver is used for the interprocessor communication + between different remote processors and host processors on Tegra186 + and later SoCs. Say Y here if you want to have this support. + If unsure say N. + +config XGENE_SLIMPRO_MBOX + tristate "APM SoC X-Gene SLIMpro Mailbox Controller" + depends on ARCH_XGENE + help + An implementation of the APM X-Gene Interprocessor Communication + Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller. + It is used to send short messages between ARM64-bit cores and + the SLIMpro Management Engine, primarily for PM. Say Y here if you + want to use the APM X-Gene SLIMpro IPCM support. + +config BCM_PDC_MBOX + tristate "Broadcom FlexSparx DMA Mailbox" + depends on ARCH_BCM_IPROC || COMPILE_TEST + help + Mailbox implementation for the Broadcom FlexSparx DMA ring manager, + which provides access to various offload engines on Broadcom + SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2. + +config BCM_FLEXRM_MBOX + tristate "Broadcom FlexRM Mailbox" + depends on ARM64 + depends on ARCH_BCM_IPROC || COMPILE_TEST + select GENERIC_MSI_IRQ + default m if ARCH_BCM_IPROC + help + Mailbox implementation of the Broadcom FlexRM ring manager, + which provides access to various offload engines on Broadcom + SoCs. Say Y here if you want to use the Broadcom FlexRM. + +config STM32_IPCC + tristate "STM32 IPCC Mailbox" + depends on MACH_STM32MP157 || COMPILE_TEST + help + Mailbox implementation for STMicroelectonics STM32 family chips + with hardware for Inter-Processor Communication Controller (IPCC) + between processors. Say Y here if you want to have this support. + +config MTK_ADSP_MBOX + tristate "MediaTek ADSP Mailbox Controller" + depends on ARCH_MEDIATEK || COMPILE_TEST + help + Say yes here to add support for "MediaTek ADSP Mailbox Controller. + This mailbox driver is used to send notification or short message + between processors with ADSP. It will place the message to share + buffer and will access the ipc control. + +config MTK_CMDQ_MBOX + tristate "MediaTek CMDQ Mailbox Support" + depends on ARCH_MEDIATEK || COMPILE_TEST + select MTK_INFRACFG + help + Say yes here to add support for the MediaTek Command Queue (CMDQ) + mailbox driver. The CMDQ is used to help read/write registers with + critical time limitation, such as updating display configuration + during the vblank. + +config ZYNQMP_IPI_MBOX + bool "Xilinx ZynqMP IPI Mailbox" + depends on ARCH_ZYNQMP && OF + help + Say yes here to add support for Xilinx IPI mailbox driver. + This mailbox driver is used to send notification or short message + between processors with Xilinx ZynqMP IPI. It will place the + message to the IPI buffer and will access the IPI control + registers to kick the other processor or enquire status. + +config SUN6I_MSGBOX + tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box" + depends on ARCH_SUNXI || COMPILE_TEST + default ARCH_SUNXI + help + Mailbox implementation for the hardware message box present in + various Allwinner SoCs. This mailbox is used for communication + between the application CPUs and the power management coprocessor. + +config SPRD_MBOX + tristate "Spreadtrum Mailbox" + depends on ARCH_SPRD || COMPILE_TEST + help + Mailbox driver implementation for the Spreadtrum platform. It is used + to send message between application processors and MCU. Say Y here if + you want to build the Spreatrum mailbox controller driver. + +config QCOM_IPCC + tristate "Qualcomm Technologies, Inc. IPCC driver" + depends on ARCH_QCOM || COMPILE_TEST + help + Qualcomm Technologies, Inc. Inter-Processor Communication Controller + (IPCC) driver for MSM devices. The driver provides mailbox support for + sending interrupts to the clients. On the other hand, the driver also + acts as an interrupt controller for receiving interrupts from clients. + Say Y here if you want to build this driver. + +endif -- cgit v1.2.3