From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/mailbox/sprd-mailbox.c | 430 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 430 insertions(+) create mode 100644 drivers/mailbox/sprd-mailbox.c (limited to 'drivers/mailbox/sprd-mailbox.c') diff --git a/drivers/mailbox/sprd-mailbox.c b/drivers/mailbox/sprd-mailbox.c new file mode 100644 index 000000000..e3c899abe --- /dev/null +++ b/drivers/mailbox/sprd-mailbox.c @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Spreadtrum mailbox driver + * + * Copyright (c) 2020 Spreadtrum Communications Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SPRD_MBOX_ID 0x0 +#define SPRD_MBOX_MSG_LOW 0x4 +#define SPRD_MBOX_MSG_HIGH 0x8 +#define SPRD_MBOX_TRIGGER 0xc +#define SPRD_MBOX_FIFO_RST 0x10 +#define SPRD_MBOX_FIFO_STS 0x14 +#define SPRD_MBOX_IRQ_STS 0x18 +#define SPRD_MBOX_IRQ_MSK 0x1c +#define SPRD_MBOX_LOCK 0x20 +#define SPRD_MBOX_FIFO_DEPTH 0x24 + +/* Bit and mask definition for inbox's SPRD_MBOX_FIFO_STS register */ +#define SPRD_INBOX_FIFO_DELIVER_MASK GENMASK(23, 16) +#define SPRD_INBOX_FIFO_OVERLOW_MASK GENMASK(15, 8) +#define SPRD_INBOX_FIFO_DELIVER_SHIFT 16 +#define SPRD_INBOX_FIFO_BUSY_MASK GENMASK(7, 0) + +/* Bit and mask definition for SPRD_MBOX_IRQ_STS register */ +#define SPRD_MBOX_IRQ_CLR BIT(0) + +/* Bit and mask definition for outbox's SPRD_MBOX_FIFO_STS register */ +#define SPRD_OUTBOX_FIFO_FULL BIT(2) +#define SPRD_OUTBOX_FIFO_WR_SHIFT 16 +#define SPRD_OUTBOX_FIFO_RD_SHIFT 24 +#define SPRD_OUTBOX_FIFO_POS_MASK GENMASK(7, 0) + +/* Bit and mask definition for inbox's SPRD_MBOX_IRQ_MSK register */ +#define SPRD_INBOX_FIFO_BLOCK_IRQ BIT(0) +#define SPRD_INBOX_FIFO_OVERFLOW_IRQ BIT(1) +#define SPRD_INBOX_FIFO_DELIVER_IRQ BIT(2) +#define SPRD_INBOX_FIFO_IRQ_MASK GENMASK(2, 0) + +/* Bit and mask definition for outbox's SPRD_MBOX_IRQ_MSK register */ +#define SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ BIT(0) +#define SPRD_OUTBOX_FIFO_IRQ_MASK GENMASK(4, 0) + +#define SPRD_OUTBOX_BASE_SPAN 0x1000 +#define SPRD_MBOX_CHAN_MAX 8 +#define SPRD_SUPP_INBOX_ID_SC9863A 7 + +struct sprd_mbox_priv { + struct mbox_controller mbox; + struct device *dev; + void __iomem *inbox_base; + void __iomem *outbox_base; + /* Base register address for supplementary outbox */ + void __iomem *supp_base; + struct clk *clk; + u32 outbox_fifo_depth; + + struct mutex lock; + u32 refcnt; + struct mbox_chan chan[SPRD_MBOX_CHAN_MAX]; +}; + +static struct sprd_mbox_priv *to_sprd_mbox_priv(struct mbox_controller *mbox) +{ + return container_of(mbox, struct sprd_mbox_priv, mbox); +} + +static u32 sprd_mbox_get_fifo_len(struct sprd_mbox_priv *priv, u32 fifo_sts) +{ + u32 wr_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_WR_SHIFT) & + SPRD_OUTBOX_FIFO_POS_MASK; + u32 rd_pos = (fifo_sts >> SPRD_OUTBOX_FIFO_RD_SHIFT) & + SPRD_OUTBOX_FIFO_POS_MASK; + u32 fifo_len; + + /* + * If the read pointer is equal with write pointer, which means the fifo + * is full or empty. + */ + if (wr_pos == rd_pos) { + if (fifo_sts & SPRD_OUTBOX_FIFO_FULL) + fifo_len = priv->outbox_fifo_depth; + else + fifo_len = 0; + } else if (wr_pos > rd_pos) { + fifo_len = wr_pos - rd_pos; + } else { + fifo_len = priv->outbox_fifo_depth - rd_pos + wr_pos; + } + + return fifo_len; +} + +static irqreturn_t do_outbox_isr(void __iomem *base, struct sprd_mbox_priv *priv) +{ + struct mbox_chan *chan; + u32 fifo_sts, fifo_len, msg[2]; + int i, id; + + fifo_sts = readl(base + SPRD_MBOX_FIFO_STS); + + fifo_len = sprd_mbox_get_fifo_len(priv, fifo_sts); + if (!fifo_len) { + dev_warn_ratelimited(priv->dev, "spurious outbox interrupt\n"); + return IRQ_NONE; + } + + for (i = 0; i < fifo_len; i++) { + msg[0] = readl(base + SPRD_MBOX_MSG_LOW); + msg[1] = readl(base + SPRD_MBOX_MSG_HIGH); + id = readl(base + SPRD_MBOX_ID); + + chan = &priv->chan[id]; + if (chan->cl) + mbox_chan_received_data(chan, (void *)msg); + else + dev_warn_ratelimited(priv->dev, + "message's been dropped at ch[%d]\n", id); + + /* Trigger to update outbox FIFO pointer */ + writel(0x1, base + SPRD_MBOX_TRIGGER); + } + + /* Clear irq status after reading all message. */ + writel(SPRD_MBOX_IRQ_CLR, base + SPRD_MBOX_IRQ_STS); + + return IRQ_HANDLED; +} + +static irqreturn_t sprd_mbox_outbox_isr(int irq, void *data) +{ + struct sprd_mbox_priv *priv = data; + + return do_outbox_isr(priv->outbox_base, priv); +} + +static irqreturn_t sprd_mbox_supp_isr(int irq, void *data) +{ + struct sprd_mbox_priv *priv = data; + + return do_outbox_isr(priv->supp_base, priv); +} + +static irqreturn_t sprd_mbox_inbox_isr(int irq, void *data) +{ + struct sprd_mbox_priv *priv = data; + struct mbox_chan *chan; + u32 fifo_sts, send_sts, busy, id; + + fifo_sts = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS); + + /* Get the inbox data delivery status */ + send_sts = (fifo_sts & SPRD_INBOX_FIFO_DELIVER_MASK) >> + SPRD_INBOX_FIFO_DELIVER_SHIFT; + if (!send_sts) { + dev_warn_ratelimited(priv->dev, "spurious inbox interrupt\n"); + return IRQ_NONE; + } + + while (send_sts) { + id = __ffs(send_sts); + send_sts &= (send_sts - 1); + + chan = &priv->chan[id]; + + /* + * Check if the message was fetched by remote target, if yes, + * that means the transmission has been completed. + */ + busy = fifo_sts & SPRD_INBOX_FIFO_BUSY_MASK; + if (!(busy & BIT(id))) + mbox_chan_txdone(chan, 0); + } + + /* Clear FIFO delivery and overflow status */ + writel(fifo_sts & + (SPRD_INBOX_FIFO_DELIVER_MASK | SPRD_INBOX_FIFO_OVERLOW_MASK), + priv->inbox_base + SPRD_MBOX_FIFO_RST); + + /* Clear irq status */ + writel(SPRD_MBOX_IRQ_CLR, priv->inbox_base + SPRD_MBOX_IRQ_STS); + + return IRQ_HANDLED; +} + +static int sprd_mbox_send_data(struct mbox_chan *chan, void *msg) +{ + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); + unsigned long id = (unsigned long)chan->con_priv; + u32 *data = msg; + + /* Write data into inbox FIFO, and only support 8 bytes every time */ + writel(data[0], priv->inbox_base + SPRD_MBOX_MSG_LOW); + writel(data[1], priv->inbox_base + SPRD_MBOX_MSG_HIGH); + + /* Set target core id */ + writel(id, priv->inbox_base + SPRD_MBOX_ID); + + /* Trigger remote request */ + writel(0x1, priv->inbox_base + SPRD_MBOX_TRIGGER); + + return 0; +} + +static int sprd_mbox_flush(struct mbox_chan *chan, unsigned long timeout) +{ + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); + unsigned long id = (unsigned long)chan->con_priv; + u32 busy; + + timeout = jiffies + msecs_to_jiffies(timeout); + + while (time_before(jiffies, timeout)) { + busy = readl(priv->inbox_base + SPRD_MBOX_FIFO_STS) & + SPRD_INBOX_FIFO_BUSY_MASK; + if (!(busy & BIT(id))) { + mbox_chan_txdone(chan, 0); + return 0; + } + + udelay(1); + } + + return -ETIME; +} + +static int sprd_mbox_startup(struct mbox_chan *chan) +{ + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); + u32 val; + + mutex_lock(&priv->lock); + if (priv->refcnt++ == 0) { + /* Select outbox FIFO mode and reset the outbox FIFO status */ + writel(0x0, priv->outbox_base + SPRD_MBOX_FIFO_RST); + + /* Enable inbox FIFO overflow and delivery interrupt */ + val = readl(priv->inbox_base + SPRD_MBOX_IRQ_MSK); + val &= ~(SPRD_INBOX_FIFO_OVERFLOW_IRQ | SPRD_INBOX_FIFO_DELIVER_IRQ); + writel(val, priv->inbox_base + SPRD_MBOX_IRQ_MSK); + + /* Enable outbox FIFO not empty interrupt */ + val = readl(priv->outbox_base + SPRD_MBOX_IRQ_MSK); + val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ; + writel(val, priv->outbox_base + SPRD_MBOX_IRQ_MSK); + + /* Enable supplementary outbox as the fundamental one */ + if (priv->supp_base) { + writel(0x0, priv->supp_base + SPRD_MBOX_FIFO_RST); + val = readl(priv->supp_base + SPRD_MBOX_IRQ_MSK); + val &= ~SPRD_OUTBOX_FIFO_NOT_EMPTY_IRQ; + writel(val, priv->supp_base + SPRD_MBOX_IRQ_MSK); + } + } + mutex_unlock(&priv->lock); + + return 0; +} + +static void sprd_mbox_shutdown(struct mbox_chan *chan) +{ + struct sprd_mbox_priv *priv = to_sprd_mbox_priv(chan->mbox); + + mutex_lock(&priv->lock); + if (--priv->refcnt == 0) { + /* Disable inbox & outbox interrupt */ + writel(SPRD_INBOX_FIFO_IRQ_MASK, priv->inbox_base + SPRD_MBOX_IRQ_MSK); + writel(SPRD_OUTBOX_FIFO_IRQ_MASK, priv->outbox_base + SPRD_MBOX_IRQ_MSK); + + if (priv->supp_base) + writel(SPRD_OUTBOX_FIFO_IRQ_MASK, + priv->supp_base + SPRD_MBOX_IRQ_MSK); + } + mutex_unlock(&priv->lock); +} + +static const struct mbox_chan_ops sprd_mbox_ops = { + .send_data = sprd_mbox_send_data, + .flush = sprd_mbox_flush, + .startup = sprd_mbox_startup, + .shutdown = sprd_mbox_shutdown, +}; + +static void sprd_mbox_disable(void *data) +{ + struct sprd_mbox_priv *priv = data; + + clk_disable_unprepare(priv->clk); +} + +static int sprd_mbox_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sprd_mbox_priv *priv; + int ret, inbox_irq, outbox_irq, supp_irq; + unsigned long id, supp; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + mutex_init(&priv->lock); + + /* + * Unisoc mailbox uses an inbox to send messages to the target + * core, and uses (an) outbox(es) to receive messages from other + * cores. + * + * Thus in general the mailbox controller supplies 2 different + * register addresses and IRQ numbers for inbox and outbox. + * + * If necessary, a supplementary inbox could be enabled optionally + * with an independent FIFO and an extra interrupt. + */ + priv->inbox_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->inbox_base)) + return PTR_ERR(priv->inbox_base); + + priv->outbox_base = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(priv->outbox_base)) + return PTR_ERR(priv->outbox_base); + + priv->clk = devm_clk_get(dev, "enable"); + if (IS_ERR(priv->clk)) { + dev_err(dev, "failed to get mailbox clock\n"); + return PTR_ERR(priv->clk); + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, sprd_mbox_disable, priv); + if (ret) { + dev_err(dev, "failed to add mailbox disable action\n"); + return ret; + } + + inbox_irq = platform_get_irq_byname(pdev, "inbox"); + if (inbox_irq < 0) + return inbox_irq; + + ret = devm_request_irq(dev, inbox_irq, sprd_mbox_inbox_isr, + IRQF_NO_SUSPEND, dev_name(dev), priv); + if (ret) { + dev_err(dev, "failed to request inbox IRQ: %d\n", ret); + return ret; + } + + outbox_irq = platform_get_irq_byname(pdev, "outbox"); + if (outbox_irq < 0) + return outbox_irq; + + ret = devm_request_irq(dev, outbox_irq, sprd_mbox_outbox_isr, + IRQF_NO_SUSPEND, dev_name(dev), priv); + if (ret) { + dev_err(dev, "failed to request outbox IRQ: %d\n", ret); + return ret; + } + + /* Supplementary outbox IRQ is optional */ + supp_irq = platform_get_irq_byname(pdev, "supp-outbox"); + if (supp_irq > 0) { + ret = devm_request_irq(dev, supp_irq, sprd_mbox_supp_isr, + IRQF_NO_SUSPEND, dev_name(dev), priv); + if (ret) { + dev_err(dev, "failed to request outbox IRQ: %d\n", ret); + return ret; + } + + supp = (unsigned long) of_device_get_match_data(dev); + if (!supp) { + dev_err(dev, "no supplementary outbox specified\n"); + return -ENODEV; + } + priv->supp_base = priv->outbox_base + (SPRD_OUTBOX_BASE_SPAN * supp); + } + + /* Get the default outbox FIFO depth */ + priv->outbox_fifo_depth = + readl(priv->outbox_base + SPRD_MBOX_FIFO_DEPTH) + 1; + priv->mbox.dev = dev; + priv->mbox.chans = &priv->chan[0]; + priv->mbox.num_chans = SPRD_MBOX_CHAN_MAX; + priv->mbox.ops = &sprd_mbox_ops; + priv->mbox.txdone_irq = true; + + for (id = 0; id < SPRD_MBOX_CHAN_MAX; id++) + priv->chan[id].con_priv = (void *)id; + + ret = devm_mbox_controller_register(dev, &priv->mbox); + if (ret) { + dev_err(dev, "failed to register mailbox: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct of_device_id sprd_mbox_of_match[] = { + { .compatible = "sprd,sc9860-mailbox" }, + { .compatible = "sprd,sc9863a-mailbox", + .data = (void *)SPRD_SUPP_INBOX_ID_SC9863A }, + { }, +}; +MODULE_DEVICE_TABLE(of, sprd_mbox_of_match); + +static struct platform_driver sprd_mbox_driver = { + .driver = { + .name = "sprd-mailbox", + .of_match_table = sprd_mbox_of_match, + }, + .probe = sprd_mbox_probe, +}; +module_platform_driver(sprd_mbox_driver); + +MODULE_AUTHOR("Baolin Wang "); +MODULE_DESCRIPTION("Spreadtrum mailbox driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3