From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/md/dm-clone-metadata.h | 177 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/md/dm-clone-metadata.h (limited to 'drivers/md/dm-clone-metadata.h') diff --git a/drivers/md/dm-clone-metadata.h b/drivers/md/dm-clone-metadata.h new file mode 100644 index 000000000..d848b8799 --- /dev/null +++ b/drivers/md/dm-clone-metadata.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2019 Arrikto, Inc. All Rights Reserved. + */ + +#ifndef DM_CLONE_METADATA_H +#define DM_CLONE_METADATA_H + +#include "persistent-data/dm-block-manager.h" +#include "persistent-data/dm-space-map-metadata.h" + +#define DM_CLONE_METADATA_BLOCK_SIZE DM_SM_METADATA_BLOCK_SIZE + +/* + * The metadata device is currently limited in size. + */ +#define DM_CLONE_METADATA_MAX_SECTORS DM_SM_METADATA_MAX_SECTORS + +/* + * A metadata device larger than 16GB triggers a warning. + */ +#define DM_CLONE_METADATA_MAX_SECTORS_WARNING (16 * (1024 * 1024 * 1024 >> SECTOR_SHIFT)) + +#define SPACE_MAP_ROOT_SIZE 128 + +/* dm-clone metadata */ +struct dm_clone_metadata; + +/* + * Set region status to hydrated. + * + * @cmd: The dm-clone metadata + * @region_nr: The region number + * + * This function doesn't block, so it's safe to call it from interrupt context. + */ +int dm_clone_set_region_hydrated(struct dm_clone_metadata *cmd, unsigned long region_nr); + +/* + * Set status of all regions in the provided range to hydrated, if not already + * hydrated. + * + * @cmd: The dm-clone metadata + * @start: Starting region number + * @nr_regions: Number of regions in the range + * + * This function doesn't block, but since it uses spin_lock_irq()/spin_unlock_irq() + * it's NOT safe to call it from any context where interrupts are disabled, e.g., + * from interrupt context. + */ +int dm_clone_cond_set_range(struct dm_clone_metadata *cmd, unsigned long start, + unsigned long nr_regions); + +/* + * Read existing or create fresh metadata. + * + * @bdev: The device storing the metadata + * @target_size: The target size + * @region_size: The region size + * + * @returns: The dm-clone metadata + * + * This function reads the superblock of @bdev and checks if it's all zeroes. + * If it is, it formats @bdev and creates fresh metadata. If it isn't, it + * validates the metadata stored in @bdev. + */ +struct dm_clone_metadata *dm_clone_metadata_open(struct block_device *bdev, + sector_t target_size, + sector_t region_size); + +/* + * Free the resources related to metadata management. + */ +void dm_clone_metadata_close(struct dm_clone_metadata *cmd); + +/* + * Commit dm-clone metadata to disk. + * + * We use a two phase commit: + * + * 1. dm_clone_metadata_pre_commit(): Prepare the current transaction for + * committing. After this is called, all subsequent metadata updates, done + * through either dm_clone_set_region_hydrated() or + * dm_clone_cond_set_range(), will be part of the **next** transaction. + * + * 2. dm_clone_metadata_commit(): Actually commit the current transaction to + * disk and start a new transaction. + * + * This allows dm-clone to flush the destination device after step (1) to + * ensure that all freshly hydrated regions, for which we are updating the + * metadata, are properly written to non-volatile storage and won't be lost in + * case of a crash. + */ +int dm_clone_metadata_pre_commit(struct dm_clone_metadata *cmd); +int dm_clone_metadata_commit(struct dm_clone_metadata *cmd); + +/* + * Reload the in core copy of the on-disk bitmap. + * + * This should be used after aborting a metadata transaction and setting the + * metadata to read-only, to invalidate the in-core cache and make it match the + * on-disk metadata. + * + * WARNING: It must not be called concurrently with either + * dm_clone_set_region_hydrated() or dm_clone_cond_set_range(), as it updates + * the region bitmap without taking the relevant spinlock. We don't take the + * spinlock because dm_clone_reload_in_core_bitset() does I/O, so it may block. + * + * But, it's safe to use it after calling dm_clone_metadata_set_read_only(), + * because the latter sets the metadata to read-only mode. Both + * dm_clone_set_region_hydrated() and dm_clone_cond_set_range() refuse to touch + * the region bitmap, after calling dm_clone_metadata_set_read_only(). + */ +int dm_clone_reload_in_core_bitset(struct dm_clone_metadata *cmd); + +/* + * Check whether dm-clone's metadata changed this transaction. + */ +bool dm_clone_changed_this_transaction(struct dm_clone_metadata *cmd); + +/* + * Abort current metadata transaction and rollback metadata to the last + * committed transaction. + */ +int dm_clone_metadata_abort(struct dm_clone_metadata *cmd); + +/* + * Switches metadata to a read only mode. Once read-only mode has been entered + * the following functions will return -EPERM: + * + * dm_clone_metadata_pre_commit() + * dm_clone_metadata_commit() + * dm_clone_set_region_hydrated() + * dm_clone_cond_set_range() + * dm_clone_metadata_abort() + */ +void dm_clone_metadata_set_read_only(struct dm_clone_metadata *cmd); +void dm_clone_metadata_set_read_write(struct dm_clone_metadata *cmd); + +/* + * Returns true if the hydration of the destination device is finished. + */ +bool dm_clone_is_hydration_done(struct dm_clone_metadata *cmd); + +/* + * Returns true if region @region_nr is hydrated. + */ +bool dm_clone_is_region_hydrated(struct dm_clone_metadata *cmd, unsigned long region_nr); + +/* + * Returns true if all the regions in the range are hydrated. + */ +bool dm_clone_is_range_hydrated(struct dm_clone_metadata *cmd, + unsigned long start, unsigned long nr_regions); + +/* + * Returns the number of hydrated regions. + */ +unsigned int dm_clone_nr_of_hydrated_regions(struct dm_clone_metadata *cmd); + +/* + * Returns the first unhydrated region with region_nr >= @start + */ +unsigned long dm_clone_find_next_unhydrated_region(struct dm_clone_metadata *cmd, + unsigned long start); + +/* + * Get the number of free metadata blocks. + */ +int dm_clone_get_free_metadata_block_count(struct dm_clone_metadata *cmd, dm_block_t *result); + +/* + * Get the total number of metadata blocks. + */ +int dm_clone_get_metadata_dev_size(struct dm_clone_metadata *cmd, dm_block_t *result); + +#endif /* DM_CLONE_METADATA_H */ -- cgit v1.2.3