From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/cec/core/cec-core.c | 470 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 470 insertions(+) create mode 100644 drivers/media/cec/core/cec-core.c (limited to 'drivers/media/cec/core/cec-core.c') diff --git a/drivers/media/cec/core/cec-core.c b/drivers/media/cec/core/cec-core.c new file mode 100644 index 000000000..af358e901 --- /dev/null +++ b/drivers/media/cec/core/cec-core.c @@ -0,0 +1,470 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * cec-core.c - HDMI Consumer Electronics Control framework - Core + * + * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cec-priv.h" + +#define CEC_NUM_DEVICES 256 +#define CEC_NAME "cec" + +/* + * 400 ms is the time it takes for one 16 byte message to be + * transferred and 5 is the maximum number of retries. Add + * another 100 ms as a margin. So if the transmit doesn't + * finish before that time something is really wrong and we + * have to time out. + * + * This is a sign that something it really wrong and a warning + * will be issued. + */ +#define CEC_XFER_TIMEOUT_MS (5 * 400 + 100) + +int cec_debug; +module_param_named(debug, cec_debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)"); + +static bool debug_phys_addr; +module_param(debug_phys_addr, bool, 0644); +MODULE_PARM_DESC(debug_phys_addr, "add CEC_CAP_PHYS_ADDR if set"); + +static dev_t cec_dev_t; + +/* Active devices */ +static DEFINE_MUTEX(cec_devnode_lock); +static DECLARE_BITMAP(cec_devnode_nums, CEC_NUM_DEVICES); + +static struct dentry *top_cec_dir; + +/* dev to cec_devnode */ +#define to_cec_devnode(cd) container_of(cd, struct cec_devnode, dev) + +int cec_get_device(struct cec_devnode *devnode) +{ + /* + * Check if the cec device is available. This needs to be done with + * the devnode->lock held to prevent an open/unregister race: + * without the lock, the device could be unregistered and freed between + * the devnode->registered check and get_device() calls, leading to + * a crash. + */ + mutex_lock(&devnode->lock); + /* + * return ENXIO if the cec device has been removed + * already or if it is not registered anymore. + */ + if (!devnode->registered) { + mutex_unlock(&devnode->lock); + return -ENXIO; + } + /* and increase the device refcount */ + get_device(&devnode->dev); + mutex_unlock(&devnode->lock); + return 0; +} + +void cec_put_device(struct cec_devnode *devnode) +{ + put_device(&devnode->dev); +} + +/* Called when the last user of the cec device exits. */ +static void cec_devnode_release(struct device *cd) +{ + struct cec_devnode *devnode = to_cec_devnode(cd); + + mutex_lock(&cec_devnode_lock); + /* Mark device node number as free */ + clear_bit(devnode->minor, cec_devnode_nums); + mutex_unlock(&cec_devnode_lock); + + cec_delete_adapter(to_cec_adapter(devnode)); +} + +static struct bus_type cec_bus_type = { + .name = CEC_NAME, +}; + +/* + * Register a cec device node + * + * The registration code assigns minor numbers and registers the new device node + * with the kernel. An error is returned if no free minor number can be found, + * or if the registration of the device node fails. + * + * Zero is returned on success. + * + * Note that if the cec_devnode_register call fails, the release() callback of + * the cec_devnode structure is *not* called, so the caller is responsible for + * freeing any data. + */ +static int __must_check cec_devnode_register(struct cec_devnode *devnode, + struct module *owner) +{ + int minor; + int ret; + + /* Part 1: Find a free minor number */ + mutex_lock(&cec_devnode_lock); + minor = find_first_zero_bit(cec_devnode_nums, CEC_NUM_DEVICES); + if (minor == CEC_NUM_DEVICES) { + mutex_unlock(&cec_devnode_lock); + pr_err("could not get a free minor\n"); + return -ENFILE; + } + + set_bit(minor, cec_devnode_nums); + mutex_unlock(&cec_devnode_lock); + + devnode->minor = minor; + devnode->dev.bus = &cec_bus_type; + devnode->dev.devt = MKDEV(MAJOR(cec_dev_t), minor); + devnode->dev.release = cec_devnode_release; + dev_set_name(&devnode->dev, "cec%d", devnode->minor); + device_initialize(&devnode->dev); + + /* Part 2: Initialize and register the character device */ + cdev_init(&devnode->cdev, &cec_devnode_fops); + devnode->cdev.owner = owner; + kobject_set_name(&devnode->cdev.kobj, "cec%d", devnode->minor); + + devnode->registered = true; + ret = cdev_device_add(&devnode->cdev, &devnode->dev); + if (ret) { + devnode->registered = false; + pr_err("%s: cdev_device_add failed\n", __func__); + goto clr_bit; + } + + return 0; + +clr_bit: + mutex_lock(&cec_devnode_lock); + clear_bit(devnode->minor, cec_devnode_nums); + mutex_unlock(&cec_devnode_lock); + return ret; +} + +/* + * Unregister a cec device node + * + * This unregisters the passed device. Future open calls will be met with + * errors. + * + * This function can safely be called if the device node has never been + * registered or has already been unregistered. + */ +static void cec_devnode_unregister(struct cec_adapter *adap) +{ + struct cec_devnode *devnode = &adap->devnode; + struct cec_fh *fh; + + mutex_lock(&devnode->lock); + + /* Check if devnode was never registered or already unregistered */ + if (!devnode->registered || devnode->unregistered) { + mutex_unlock(&devnode->lock); + return; + } + devnode->registered = false; + devnode->unregistered = true; + + mutex_lock(&devnode->lock_fhs); + list_for_each_entry(fh, &devnode->fhs, list) + wake_up_interruptible(&fh->wait); + mutex_unlock(&devnode->lock_fhs); + + mutex_unlock(&devnode->lock); + + mutex_lock(&adap->lock); + __cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false); + __cec_s_log_addrs(adap, NULL, false); + mutex_unlock(&adap->lock); + + cdev_device_del(&devnode->cdev, &devnode->dev); + put_device(&devnode->dev); +} + +#ifdef CONFIG_DEBUG_FS +static ssize_t cec_error_inj_write(struct file *file, + const char __user *ubuf, size_t count, loff_t *ppos) +{ + struct seq_file *sf = file->private_data; + struct cec_adapter *adap = sf->private; + char *buf; + char *line; + char *p; + + buf = memdup_user_nul(ubuf, min_t(size_t, PAGE_SIZE, count)); + if (IS_ERR(buf)) + return PTR_ERR(buf); + p = buf; + while (p && *p) { + p = skip_spaces(p); + line = strsep(&p, "\n"); + if (!*line || *line == '#') + continue; + if (!call_op(adap, error_inj_parse_line, line)) { + kfree(buf); + return -EINVAL; + } + } + kfree(buf); + return count; +} + +static int cec_error_inj_show(struct seq_file *sf, void *unused) +{ + struct cec_adapter *adap = sf->private; + + return call_op(adap, error_inj_show, sf); +} + +static int cec_error_inj_open(struct inode *inode, struct file *file) +{ + return single_open(file, cec_error_inj_show, inode->i_private); +} + +static const struct file_operations cec_error_inj_fops = { + .open = cec_error_inj_open, + .write = cec_error_inj_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif + +struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, + void *priv, const char *name, u32 caps, + u8 available_las) +{ + struct cec_adapter *adap; + int res; + +#ifndef CONFIG_MEDIA_CEC_RC + caps &= ~CEC_CAP_RC; +#endif + + if (WARN_ON(!caps)) + return ERR_PTR(-EINVAL); + if (WARN_ON(!ops)) + return ERR_PTR(-EINVAL); + if (WARN_ON(!available_las || available_las > CEC_MAX_LOG_ADDRS)) + return ERR_PTR(-EINVAL); + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (!adap) + return ERR_PTR(-ENOMEM); + strscpy(adap->name, name, sizeof(adap->name)); + adap->phys_addr = CEC_PHYS_ADDR_INVALID; + adap->cec_pin_is_high = true; + adap->log_addrs.cec_version = CEC_OP_CEC_VERSION_2_0; + adap->log_addrs.vendor_id = CEC_VENDOR_ID_NONE; + adap->capabilities = caps; + if (debug_phys_addr) + adap->capabilities |= CEC_CAP_PHYS_ADDR; + adap->needs_hpd = caps & CEC_CAP_NEEDS_HPD; + adap->available_log_addrs = available_las; + adap->sequence = 0; + adap->ops = ops; + adap->priv = priv; + mutex_init(&adap->lock); + INIT_LIST_HEAD(&adap->transmit_queue); + INIT_LIST_HEAD(&adap->wait_queue); + init_waitqueue_head(&adap->kthread_waitq); + + /* adap->devnode initialization */ + INIT_LIST_HEAD(&adap->devnode.fhs); + mutex_init(&adap->devnode.lock_fhs); + mutex_init(&adap->devnode.lock); + + adap->kthread = kthread_run(cec_thread_func, adap, "cec-%s", name); + if (IS_ERR(adap->kthread)) { + pr_err("cec-%s: kernel_thread() failed\n", name); + res = PTR_ERR(adap->kthread); + kfree(adap); + return ERR_PTR(res); + } + +#ifdef CONFIG_MEDIA_CEC_RC + if (!(caps & CEC_CAP_RC)) + return adap; + + /* Prepare the RC input device */ + adap->rc = rc_allocate_device(RC_DRIVER_SCANCODE); + if (!adap->rc) { + pr_err("cec-%s: failed to allocate memory for rc_dev\n", + name); + kthread_stop(adap->kthread); + kfree(adap); + return ERR_PTR(-ENOMEM); + } + + snprintf(adap->input_phys, sizeof(adap->input_phys), + "%s/input0", adap->name); + + adap->rc->device_name = adap->name; + adap->rc->input_phys = adap->input_phys; + adap->rc->input_id.bustype = BUS_CEC; + adap->rc->input_id.vendor = 0; + adap->rc->input_id.product = 0; + adap->rc->input_id.version = 1; + adap->rc->driver_name = CEC_NAME; + adap->rc->allowed_protocols = RC_PROTO_BIT_CEC; + adap->rc->priv = adap; + adap->rc->map_name = RC_MAP_CEC; + adap->rc->timeout = MS_TO_US(550); +#endif + return adap; +} +EXPORT_SYMBOL_GPL(cec_allocate_adapter); + +int cec_register_adapter(struct cec_adapter *adap, + struct device *parent) +{ + int res; + + if (IS_ERR_OR_NULL(adap)) + return 0; + + if (WARN_ON(!parent)) + return -EINVAL; + + adap->owner = parent->driver->owner; + adap->devnode.dev.parent = parent; + if (!adap->xfer_timeout_ms) + adap->xfer_timeout_ms = CEC_XFER_TIMEOUT_MS; + +#ifdef CONFIG_MEDIA_CEC_RC + if (adap->capabilities & CEC_CAP_RC) { + adap->rc->dev.parent = parent; + res = rc_register_device(adap->rc); + + if (res) { + pr_err("cec-%s: failed to prepare input device\n", + adap->name); + rc_free_device(adap->rc); + adap->rc = NULL; + return res; + } + } +#endif + + res = cec_devnode_register(&adap->devnode, adap->owner); + if (res) { +#ifdef CONFIG_MEDIA_CEC_RC + /* Note: rc_unregister also calls rc_free */ + rc_unregister_device(adap->rc); + adap->rc = NULL; +#endif + return res; + } + + dev_set_drvdata(&adap->devnode.dev, adap); +#ifdef CONFIG_DEBUG_FS + if (!top_cec_dir) + return 0; + + adap->cec_dir = debugfs_create_dir(dev_name(&adap->devnode.dev), + top_cec_dir); + + debugfs_create_devm_seqfile(&adap->devnode.dev, "status", adap->cec_dir, + cec_adap_status); + + if (!adap->ops->error_inj_show || !adap->ops->error_inj_parse_line) + return 0; + debugfs_create_file("error-inj", 0644, adap->cec_dir, adap, + &cec_error_inj_fops); +#endif + return 0; +} +EXPORT_SYMBOL_GPL(cec_register_adapter); + +void cec_unregister_adapter(struct cec_adapter *adap) +{ + if (IS_ERR_OR_NULL(adap)) + return; + +#ifdef CONFIG_MEDIA_CEC_RC + /* Note: rc_unregister also calls rc_free */ + rc_unregister_device(adap->rc); + adap->rc = NULL; +#endif + debugfs_remove_recursive(adap->cec_dir); +#ifdef CONFIG_CEC_NOTIFIER + cec_notifier_cec_adap_unregister(adap->notifier, adap); +#endif + cec_devnode_unregister(adap); +} +EXPORT_SYMBOL_GPL(cec_unregister_adapter); + +void cec_delete_adapter(struct cec_adapter *adap) +{ + if (IS_ERR_OR_NULL(adap)) + return; + if (adap->kthread_config) + kthread_stop(adap->kthread_config); + kthread_stop(adap->kthread); + if (adap->ops->adap_free) + adap->ops->adap_free(adap); +#ifdef CONFIG_MEDIA_CEC_RC + rc_free_device(adap->rc); +#endif + kfree(adap); +} +EXPORT_SYMBOL_GPL(cec_delete_adapter); + +/* + * Initialise cec for linux + */ +static int __init cec_devnode_init(void) +{ + int ret = alloc_chrdev_region(&cec_dev_t, 0, CEC_NUM_DEVICES, CEC_NAME); + + if (ret < 0) { + pr_warn("cec: unable to allocate major\n"); + return ret; + } + +#ifdef CONFIG_DEBUG_FS + top_cec_dir = debugfs_create_dir("cec", NULL); + if (IS_ERR_OR_NULL(top_cec_dir)) { + pr_warn("cec: Failed to create debugfs cec dir\n"); + top_cec_dir = NULL; + } +#endif + + ret = bus_register(&cec_bus_type); + if (ret < 0) { + unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES); + pr_warn("cec: bus_register failed\n"); + return -EIO; + } + + return 0; +} + +static void __exit cec_devnode_exit(void) +{ + debugfs_remove_recursive(top_cec_dir); + bus_unregister(&cec_bus_type); + unregister_chrdev_region(cec_dev_t, CEC_NUM_DEVICES); +} + +subsys_initcall(cec_devnode_init); +module_exit(cec_devnode_exit) + +MODULE_AUTHOR("Hans Verkuil "); +MODULE_DESCRIPTION("Device node registration for cec drivers"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3