From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/dvb-frontends/Kconfig | 957 ++++++++++++++++++++++++++++++++++++ 1 file changed, 957 insertions(+) create mode 100644 drivers/media/dvb-frontends/Kconfig (limited to 'drivers/media/dvb-frontends/Kconfig') diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig new file mode 100644 index 000000000..2ef2ff2a3 --- /dev/null +++ b/drivers/media/dvb-frontends/Kconfig @@ -0,0 +1,957 @@ +# SPDX-License-Identifier: GPL-2.0 + +if MEDIA_DIGITAL_TV_SUPPORT + +comment "DVB Frontend drivers auto-selected by 'Autoselect ancillary drivers'" + depends on MEDIA_HIDE_ANCILLARY_SUBDRV + +menu "Customise DVB Frontends" + visible if !MEDIA_HIDE_ANCILLARY_SUBDRV + +comment "Multistandard (satellite) frontends" + depends on DVB_CORE + +config DVB_M88DS3103 + tristate "Montage Technology M88DS3103" + depends on DVB_CORE && I2C && I2C_MUX + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_MXL5XX + tristate "MaxLinear MxL5xx based tuner-demodulators" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + MaxLinear MxL5xx family of DVB-S/S2 tuners/demodulators. + + Say Y when you want to support these frontends. + +config DVB_STB0899 + tristate "STB0899 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2/DSS Multistandard demodulator. Say Y when you want + to support this demodulator based frontends + +config DVB_STB6100 + tristate "STB6100 based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A Silicon tuner from ST used in conjunction with the STB0899 + demodulator. Say Y when you want to support this tuner. + +config DVB_STV090x + tristate "STV0900/STV0903(A/B) based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + DVB-S/S2/DSS Multistandard Professional/Broadcast demodulators. + Say Y when you want to support these frontends. + +config DVB_STV0910 + tristate "STV0910 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + ST STV0910 DVB-S/S2 demodulator driver. + + Say Y when you want to support these frontends. + +config DVB_STV6110x + tristate "STV6110/(A) based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A Silicon tuner that supports DVB-S and DVB-S2 modes + +config DVB_STV6111 + tristate "STV6111 based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A Silicon tuner that supports DVB-S and DVB-S2 modes + + Say Y when you want to support these frontends. + +comment "Multistandard (cable + terrestrial) frontends" + depends on DVB_CORE + +config DVB_DRXK + tristate "Micronas DRXK based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Micronas DRX-K DVB-C/T demodulator. + + Say Y when you want to support this frontend. + +config DVB_MN88472 + tristate "Panasonic MN88472" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_MN88473 + tristate "Panasonic MN88473" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_SI2165 + tristate "Silicon Labs si2165 based" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C/T demodulator. + + Say Y when you want to support this frontend. + +config DVB_TDA18271C2DD + tristate "NXP TDA18271C2 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + NXP TDA18271 silicon tuner. + + Say Y when you want to support this tuner. + +comment "DVB-S (satellite) frontends" + depends on DVB_CORE + +config DVB_CX24110 + tristate "Conexant CX24110 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_CX24116 + tristate "Conexant CX24116 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 tuner module. Say Y when you want to support this frontend. + +config DVB_CX24117 + tristate "Conexant CX24117 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A Dual DVB-S/S2 tuner module. Say Y when you want to support this frontend. + +config DVB_CX24120 + tristate "Conexant CX24120 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 tuner module. Say Y when you want to support this frontend. + +config DVB_CX24123 + tristate "Conexant CX24123 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_DS3000 + tristate "Montage Tehnology DS3000 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 tuner module. Say Y when you want to support this frontend. + +config DVB_MB86A16 + tristate "Fujitsu MB86A16 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/DSS Direct Conversion reveiver. + Say Y when you want to support this frontend. + +config DVB_MT312 + tristate "Zarlink VP310/MT312/ZL10313 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_S5H1420 + tristate "Samsung S5H1420 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_SI21XX + tristate "Silicon Labs SI21XX based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STB6000 + tristate "ST STB6000 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_STV0288 + tristate "ST STV0288 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STV0299 + tristate "ST STV0299 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_STV0900 + tristate "ST STV0900 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 demodulator. Say Y when you want to support this frontend. + +config DVB_STV6110 + tristate "ST STV6110 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_TDA10071 + tristate "NXP TDA10071" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_TDA10086 + tristate "Philips TDA10086 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TDA8083 + tristate "Philips TDA8083 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TDA8261 + tristate "Philips TDA8261 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TDA826X + tristate "Philips TDA826X silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S silicon tuner module. Say Y when you want to support this tuner. + +config DVB_TS2020 + tristate "Montage Tehnology TS2020 based tuners" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S/S2 silicon tuner. Say Y when you want to support this tuner. + +config DVB_TUA6100 + tristate "Infineon TUA6100 PLL" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S PLL chip. + +config DVB_TUNER_CX24113 + tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_TUNER_ITD1000 + tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_VES1X93 + tristate "VLSI VES1893 or VES1993 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_ZL10036 + tristate "Zarlink ZL10036 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_ZL10039 + tristate "Zarlink ZL10039 silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +comment "DVB-T (terrestrial) frontends" + depends on DVB_CORE + +config DVB_AF9013 + tristate "Afatech AF9013 demodulator" + depends on DVB_CORE && I2C && I2C_MUX + select REGMAP + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_AS102_FE + tristate + depends on DVB_CORE + default DVB_AS102 + +config DVB_CX22700 + tristate "Conexant CX22700 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_CX22702 + tristate "Conexant cx22702 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_CXD2820R + tristate "Sony CXD2820R" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_CXD2841ER + tristate "Sony CXD2841ER" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_DIB3000MB + tristate "DiBcom 3000M-B" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB3000MC + tristate "DiBcom 3000P/M-C" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB7000M + tristate "DiBcom 7000MA/MB/PA/PB/MC" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB7000P + tristate "DiBcom 7000PC" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DIB9000 + tristate "DiBcom 9000" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Designed for mobile usage. Say Y when you want + to support this frontend. + +config DVB_DRXD + tristate "Micronas DRXD driver" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + + Note: this driver was based on vendor driver reference code (released + under the GPL) as opposed to the existing drx397xd driver, which + was written via reverse engineering. + +config DVB_EC100 + tristate "E3C EC100" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_GP8PSK_FE + tristate + depends on DVB_CORE + default DVB_USB_GP8PSK + +config DVB_L64781 + tristate "LSI L64781" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_MT352 + tristate "Zarlink MT352 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_NXT6000 + tristate "NxtWave Communications NXT6000 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_RTL2830 + tristate "Realtek RTL2830 DVB-T" + depends on DVB_CORE && I2C && I2C_MUX + select REGMAP + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_RTL2832 + tristate "Realtek RTL2832 DVB-T" + depends on DVB_CORE && I2C && I2C_MUX + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_RTL2832_SDR + tristate "Realtek RTL2832 SDR" + depends on DVB_CORE && I2C && I2C_MUX && VIDEO_DEV && MEDIA_SDR_SUPPORT && USB + select DVB_RTL2832 + select VIDEOBUF2_VMALLOC + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this SDR module. + +config DVB_S5H1432 + tristate "Samsung s5h1432 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_SI2168 + tristate "Silicon Labs Si2168" + depends on DVB_CORE && I2C && I2C_MUX + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_SP887X + tristate "Spase sp887x based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + + This driver needs external firmware. Please use the command + "/scripts/get_dvb_firmware sp887x" to + download/extract it, and then copy it to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_STV0367 + tristate "ST STV0367 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T/C tuner module. Say Y when you want to support this frontend. + +config DVB_TDA10048 + tristate "Philips TDA10048HN based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +config DVB_TDA1004X + tristate "Philips TDA10045H/TDA10046H based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + + This driver needs external firmware. Please use the commands + "/scripts/get_dvb_firmware tda10045", + "/scripts/get_dvb_firmware tda10046" to + download/extract them, and then copy them to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_ZD1301_DEMOD + tristate "ZyDAS ZD1301" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_ZL10353 + tristate "Zarlink ZL10353 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-T tuner module. Say Y when you want to support this frontend. + +source "drivers/media/dvb-frontends/cxd2880/Kconfig" + +comment "DVB-C (cable) frontends" + depends on DVB_CORE + +config DVB_STV0297 + tristate "ST STV0297 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +config DVB_TDA10021 + tristate "Philips TDA10021 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +config DVB_TDA10023 + tristate "Philips TDA10023 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +config DVB_VES1820 + tristate "VLSI VES1820 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-C tuner module. Say Y when you want to support this frontend. + +comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends" + depends on DVB_CORE + +config DVB_AU8522 + depends on DVB_CORE && I2C + tristate + +config DVB_AU8522_DTV + tristate "Auvitek AU8522 based DTV demod" + depends on DVB_CORE && I2C + select DVB_AU8522 + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when + you want to enable DTV demodulation support for this frontend. + +config DVB_AU8522_V4L + tristate "Auvitek AU8522 based ATV demod" + depends on VIDEO_DEV && DVB_CORE && I2C + select DVB_AU8522 + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when + you want to enable ATV demodulation support for this frontend. + +config DVB_BCM3510 + tristate "Broadcom BCM3510" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to + support this frontend. + +config DVB_LG2160 + tristate "LG Electronics LG216x based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC/MH demodulator module. Say Y when you want + to support this frontend. + +config DVB_LGDT3305 + tristate "LG Electronics LGDT3304 and LGDT3305 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +config DVB_LGDT3306A + tristate "LG Electronics LGDT3306A based" + depends on DVB_CORE && I2C && I2C_MUX + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM-B 64/256 demodulator module. Say Y when you want + to support this frontend. + +config DVB_LGDT330X + tristate "LG Electronics LGDT3302/LGDT3303 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +config DVB_MXL692 + tristate "MaxLinear MXL692 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + MaxLinear MxL692 is a combo tuner-demodulator that + supports ATSC 8VSB and QAM modes. Say Y when you want to + support this frontend. + +config DVB_NXT200X + tristate "NxtWave Communications NXT2002/NXT2004 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + + This driver needs external firmware. Please use the commands + "/scripts/get_dvb_firmware nxt2002" and + "/scripts/get_dvb_firmware nxt2004" to + download/extract them, and then copy them to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_OR51132 + tristate "Oren OR51132 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + + This driver needs external firmware. Please use the commands + "/scripts/get_dvb_firmware or51132_vsb" and/or + "/scripts/get_dvb_firmware or51132_qam" to + download firmwares for 8VSB and QAM64/256, respectively. Copy them to + /usr/lib/hotplug/firmware or /lib/firmware (depending on + configuration of firmware hotplug). + +config DVB_OR51211 + tristate "Oren OR51211 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB tuner module. Say Y when you want to support this frontend. + + This driver needs external firmware. Please use the command + "/scripts/get_dvb_firmware or51211" to + download it, and then copy it to /usr/lib/hotplug/firmware + or /lib/firmware (depending on configuration of firmware hotplug). + +config DVB_S5H1409 + tristate "Samsung S5H1409 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +config DVB_S5H1411 + tristate "Samsung S5H1411 based" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + +comment "ISDB-T (terrestrial) frontends" + depends on DVB_CORE + +config DVB_DIB8000 + tristate "DiBcom 8000MB/MC" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator. + Say Y when you want to support this frontend. + +config DVB_MB86A20S + tristate "Fujitsu mb86a20s" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator. + Say Y when you want to support this frontend. + +config DVB_S921 + tristate "Sharp S921 frontend" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module. + Say Y when you want to support this frontend. + +comment "ISDB-S (satellite) & ISDB-T (terrestrial) frontends" + depends on DVB_CORE + +config DVB_MN88443X + tristate "Socionext MN88443x" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for Socionext/Panasonic MN884433 and MN884434 + ISDB-S + ISDB-T demodulator. + Say Y when you want to support this frontend. + +config DVB_TC90522 + tristate "Toshiba TC90522" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Toshiba TC90522 2xISDB-S 8PSK + 2xISDB-T OFDM demodulator. + Say Y when you want to support this frontend. + +comment "Digital terrestrial only tuners/PLL" + depends on DVB_CORE + +config DVB_PLL + tristate "Generic I2C PLL based tuners" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + This module drives a number of tuners based on PLL chips with a + common I2C interface. Say Y when you want to support these tuners. + +config DVB_TUNER_DIB0070 + tristate "DiBcom DiB0070 silicon base-band tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for the silicon baseband tuner DiB0070 from DiBcom. + This device is only used inside a SiP called together with a + demodulator for now. + +config DVB_TUNER_DIB0090 + tristate "DiBcom DiB0090 silicon base-band tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for the silicon baseband tuner DiB0090 from DiBcom. + This device is only used inside a SiP called together with a + demodulator for now. + +comment "SEC control devices for DVB-S" + depends on DVB_CORE + +config DVB_A8293 + tristate "Allegro A8293" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + +config DVB_AF9033 + tristate "Afatech AF9033 DVB-T demodulator" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + +config DVB_ASCOT2E + tristate "Sony Ascot2E tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_ATBM8830 + tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + +config DVB_HELENE + tristate "Sony HELENE Sat/Ter tuner (CXD2858ER)" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_HORUS3A + tristate "Sony Horus3A tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Say Y when you want to support this frontend. + +config DVB_ISL6405 + tristate "ISL6405 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An SEC control chip. + +config DVB_ISL6421 + tristate "ISL6421 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An SEC control chip. + +config DVB_ISL6423 + tristate "ISL6423 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A SEC controller chip from Intersil + +config DVB_IX2505V + tristate "Sharp IX2505V silicon tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. Say Y when you want to support this frontend. + +config DVB_LGS8GL5 + tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + +config DVB_LGS8GXX + tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator" + depends on DVB_CORE && I2C + select FW_LOADER + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + +config DVB_LNBH25 + tristate "LNBH25 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An SEC control chip. + Say Y when you want to support this chip. + +config DVB_LNBH29 + tristate "LNBH29 SEC controller" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + LNB power supply and control voltage + regulator chip with step-up converter + and I2C interface for STMicroelectronics LNBH29. + Say Y when you want to support this chip. + +config DVB_LNBP21 + tristate "LNBP21/LNBH24 SEC controllers" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + An SEC control chips. + +config DVB_LNBP22 + tristate "LNBP22 SEC controllers" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + LNB power supply and control voltage + regulator chip with step-up converter + and I2C interface. + Say Y when you want to support this chip. + +config DVB_M88RS2000 + tristate "M88RS2000 DVB-S demodulator and tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A DVB-S tuner module. + Say Y when you want to support this frontend. + +config DVB_TDA665x + tristate "TDA665x tuner" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + Support for tuner modules based on Philips TDA6650/TDA6651 chips. + Say Y when you want to support this chip. + + Currently supported tuners: + * Panasonic ENV57H12D5 (ET-50DT) + +source "drivers/media/dvb-frontends/drx39xyj/Kconfig" + +comment "Common Interface (EN50221) controller drivers" + depends on DVB_CORE + +config DVB_CXD2099 + tristate "Sony CXD2099AR Common Interface driver" + depends on DVB_CORE && I2C + select REGMAP_I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + A driver for the CI controller currently found mostly on + Digital Devices DuoFlex CI (single) addon modules. + + Say Y when you want to support these devices. + +config DVB_SP2 + tristate "CIMaX SP2" + depends on DVB_CORE && I2C + default m if !MEDIA_SUBDRV_AUTOSELECT + help + CIMaX SP2/SP2HF Common Interface module. + +endmenu # Customise DVB Frontends + +endif # MEDIA_DIGITAL_TV_SUPPORT + +comment "Tools to develop new frontends" + depends on MEDIA_TEST_SUPPORT + +config DVB_DUMMY_FE + tristate "Dummy frontend driver" + depends on MEDIA_TEST_SUPPORT && DVB_CORE + help + Dummy skeleton frontend driver. -- cgit v1.2.3