From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/dvb-frontends/dibx000_common.c | 508 +++++++++++++++++++++++++++ 1 file changed, 508 insertions(+) create mode 100644 drivers/media/dvb-frontends/dibx000_common.c (limited to 'drivers/media/dvb-frontends/dibx000_common.c') diff --git a/drivers/media/dvb-frontends/dibx000_common.c b/drivers/media/dvb-frontends/dibx000_common.c new file mode 100644 index 000000000..63a4c6a4a --- /dev/null +++ b/drivers/media/dvb-frontends/dibx000_common.c @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0-only +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include + +#include "dibx000_common.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) + +static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val) +{ + int ret; + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return -EINVAL; + } + + mst->i2c_write_buffer[0] = (reg >> 8) & 0xff; + mst->i2c_write_buffer[1] = reg & 0xff; + mst->i2c_write_buffer[2] = (val >> 8) & 0xff; + mst->i2c_write_buffer[3] = val & 0xff; + + memset(mst->msg, 0, sizeof(struct i2c_msg)); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].flags = 0; + mst->msg[0].buf = mst->i2c_write_buffer; + mst->msg[0].len = 4; + + ret = i2c_transfer(mst->i2c_adap, mst->msg, 1) != 1 ? -EREMOTEIO : 0; + mutex_unlock(&mst->i2c_buffer_lock); + + return ret; +} + +static u16 dibx000_read_word(struct dibx000_i2c_master *mst, u16 reg) +{ + u16 ret; + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return 0; + } + + mst->i2c_write_buffer[0] = reg >> 8; + mst->i2c_write_buffer[1] = reg & 0xff; + + memset(mst->msg, 0, 2 * sizeof(struct i2c_msg)); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].flags = 0; + mst->msg[0].buf = mst->i2c_write_buffer; + mst->msg[0].len = 2; + mst->msg[1].addr = mst->i2c_addr; + mst->msg[1].flags = I2C_M_RD; + mst->msg[1].buf = mst->i2c_read_buffer; + mst->msg[1].len = 2; + + if (i2c_transfer(mst->i2c_adap, mst->msg, 2) != 2) + dprintk("i2c read error on %d\n", reg); + + ret = (mst->i2c_read_buffer[0] << 8) | mst->i2c_read_buffer[1]; + mutex_unlock(&mst->i2c_buffer_lock); + + return ret; +} + +static int dibx000_is_i2c_done(struct dibx000_i2c_master *mst) +{ + int i = 100; + u16 status; + + while (((status = dibx000_read_word(mst, mst->base_reg + 2)) & 0x0100) == 0 && --i > 0) + ; + + /* i2c timed out */ + if (i == 0) + return -EREMOTEIO; + + /* no acknowledge */ + if ((status & 0x0080) == 0) + return -EREMOTEIO; + + return 0; +} + +static int dibx000_master_i2c_write(struct dibx000_i2c_master *mst, struct i2c_msg *msg, u8 stop) +{ + u16 data; + u16 da; + u16 i; + u16 txlen = msg->len, len; + const u8 *b = msg->buf; + + while (txlen) { + dibx000_read_word(mst, mst->base_reg + 2); + + len = txlen > 8 ? 8 : txlen; + for (i = 0; i < len; i += 2) { + data = *b++ << 8; + if (i+1 < len) + data |= *b++; + dibx000_write_word(mst, mst->base_reg, data); + } + da = (((u8) (msg->addr)) << 9) | + (1 << 8) | + (1 << 7) | + (0 << 6) | + (0 << 5) | + ((len & 0x7) << 2) | + (0 << 1) | + (0 << 0); + + if (txlen == msg->len) + da |= 1 << 5; /* start */ + + if (txlen-len == 0 && stop) + da |= 1 << 6; /* stop */ + + dibx000_write_word(mst, mst->base_reg+1, da); + + if (dibx000_is_i2c_done(mst) != 0) + return -EREMOTEIO; + txlen -= len; + } + + return 0; +} + +static int dibx000_master_i2c_read(struct dibx000_i2c_master *mst, struct i2c_msg *msg) +{ + u16 da; + u8 *b = msg->buf; + u16 rxlen = msg->len, len; + + while (rxlen) { + len = rxlen > 8 ? 8 : rxlen; + da = (((u8) (msg->addr)) << 9) | + (1 << 8) | + (1 << 7) | + (0 << 6) | + (0 << 5) | + ((len & 0x7) << 2) | + (1 << 1) | + (0 << 0); + + if (rxlen == msg->len) + da |= 1 << 5; /* start */ + + if (rxlen-len == 0) + da |= 1 << 6; /* stop */ + dibx000_write_word(mst, mst->base_reg+1, da); + + if (dibx000_is_i2c_done(mst) != 0) + return -EREMOTEIO; + + rxlen -= len; + + while (len) { + da = dibx000_read_word(mst, mst->base_reg); + *b++ = (da >> 8) & 0xff; + len--; + if (len >= 1) { + *b++ = da & 0xff; + len--; + } + } + } + + return 0; +} + +int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + + if (mst->device_rev < DIB7000MC && speed < 235) + speed = 235; + return dibx000_write_word(mst, mst->base_reg + 3, (u16)(60000 / speed)); + +} +EXPORT_SYMBOL(dibx000_i2c_set_speed); + +static u32 dibx000_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, + enum dibx000_i2c_interface intf) +{ + if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) { + dprintk("selecting interface: %d\n", intf); + mst->selected_interface = intf; + return dibx000_write_word(mst, mst->base_reg + 4, intf); + } + return 0; +} + +static int dibx000_i2c_master_xfer_gpio12(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int msg_index; + int ret = 0; + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_1_2); + for (msg_index = 0; msg_index < num; msg_index++) { + if (msg[msg_index].flags & I2C_M_RD) { + ret = dibx000_master_i2c_read(mst, &msg[msg_index]); + if (ret != 0) + return 0; + } else { + ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1); + if (ret != 0) + return 0; + } + } + + return num; +} + +static int dibx000_i2c_master_xfer_gpio34(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int msg_index; + int ret = 0; + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_3_4); + for (msg_index = 0; msg_index < num; msg_index++) { + if (msg[msg_index].flags & I2C_M_RD) { + ret = dibx000_master_i2c_read(mst, &msg[msg_index]); + if (ret != 0) + return 0; + } else { + ret = dibx000_master_i2c_write(mst, &msg[msg_index], 1); + if (ret != 0) + return 0; + } + } + + return num; +} + +static struct i2c_algorithm dibx000_i2c_master_gpio12_xfer_algo = { + .master_xfer = dibx000_i2c_master_xfer_gpio12, + .functionality = dibx000_i2c_func, +}; + +static struct i2c_algorithm dibx000_i2c_master_gpio34_xfer_algo = { + .master_xfer = dibx000_i2c_master_xfer_gpio34, + .functionality = dibx000_i2c_func, +}; + +static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], + u8 addr, int onoff) +{ + u16 val; + + + if (onoff) + val = addr << 8; // bit 7 = use master or not, if 0, the gate is open + else + val = 1 << 7; + + if (mst->device_rev > DIB7000) + val <<= 1; + + tx[0] = (((mst->base_reg + 1) >> 8) & 0xff); + tx[1] = ((mst->base_reg + 1) & 0xff); + tx[2] = val >> 8; + tx[3] = val & 0xff; + + return 0; +} + +static int dibx000_i2c_gated_gpio67_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int ret; + + if (num > 32) { + dprintk("%s: too much I2C message to be transmitted (%i). Maximum is 32", + __func__, num); + return -ENOMEM; + } + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_GPIO_6_7); + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return -EINVAL; + } + + memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num)); + + /* open the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].buf = &mst->i2c_write_buffer[0]; + mst->msg[0].len = 4; + + memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num); + + /* close the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0); + mst->msg[num + 1].addr = mst->i2c_addr; + mst->msg[num + 1].buf = &mst->i2c_write_buffer[4]; + mst->msg[num + 1].len = 4; + + ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? + num : -EIO); + + mutex_unlock(&mst->i2c_buffer_lock); + return ret; +} + +static struct i2c_algorithm dibx000_i2c_gated_gpio67_algo = { + .master_xfer = dibx000_i2c_gated_gpio67_xfer, + .functionality = dibx000_i2c_func, +}; + +static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) +{ + struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); + int ret; + + if (num > 32) { + dprintk("%s: too much I2C message to be transmitted (%i). Maximum is 32", + __func__, num); + return -ENOMEM; + } + + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); + + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return -EINVAL; + } + memset(mst->msg, 0, sizeof(struct i2c_msg) * (2 + num)); + + /* open the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[0], msg[0].addr, 1); + mst->msg[0].addr = mst->i2c_addr; + mst->msg[0].buf = &mst->i2c_write_buffer[0]; + mst->msg[0].len = 4; + + memcpy(&mst->msg[1], msg, sizeof(struct i2c_msg) * num); + + /* close the gate */ + dibx000_i2c_gate_ctrl(mst, &mst->i2c_write_buffer[4], 0, 0); + mst->msg[num + 1].addr = mst->i2c_addr; + mst->msg[num + 1].buf = &mst->i2c_write_buffer[4]; + mst->msg[num + 1].len = 4; + + ret = (i2c_transfer(mst->i2c_adap, mst->msg, 2 + num) == 2 + num ? + num : -EIO); + mutex_unlock(&mst->i2c_buffer_lock); + return ret; +} + +static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = { + .master_xfer = dibx000_i2c_gated_tuner_xfer, + .functionality = dibx000_i2c_func, +}; + +struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, + enum dibx000_i2c_interface intf, + int gating) +{ + struct i2c_adapter *i2c = NULL; + + switch (intf) { + case DIBX000_I2C_INTERFACE_TUNER: + if (gating) + i2c = &mst->gated_tuner_i2c_adap; + break; + case DIBX000_I2C_INTERFACE_GPIO_1_2: + if (!gating) + i2c = &mst->master_i2c_adap_gpio12; + break; + case DIBX000_I2C_INTERFACE_GPIO_3_4: + if (!gating) + i2c = &mst->master_i2c_adap_gpio34; + break; + case DIBX000_I2C_INTERFACE_GPIO_6_7: + if (gating) + i2c = &mst->master_i2c_adap_gpio67; + break; + default: + pr_err("incorrect I2C interface selected\n"); + break; + } + + return i2c; +} + +EXPORT_SYMBOL(dibx000_get_i2c_adapter); + +void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst) +{ + /* initialize the i2c-master by closing the gate */ + u8 tx[4]; + struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 }; + + dibx000_i2c_gate_ctrl(mst, tx, 0, 0); + i2c_transfer(mst->i2c_adap, &m, 1); + mst->selected_interface = 0xff; // the first time force a select of the I2C + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); +} + +EXPORT_SYMBOL(dibx000_reset_i2c_master); + +static int i2c_adapter_init(struct i2c_adapter *i2c_adap, + struct i2c_algorithm *algo, const char *name, + struct dibx000_i2c_master *mst) +{ + strscpy(i2c_adap->name, name, sizeof(i2c_adap->name)); + i2c_adap->algo = algo; + i2c_adap->algo_data = NULL; + i2c_set_adapdata(i2c_adap, mst); + if (i2c_add_adapter(i2c_adap) < 0) + return -ENODEV; + return 0; +} + +int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, + struct i2c_adapter *i2c_adap, u8 i2c_addr) +{ + int ret; + + mutex_init(&mst->i2c_buffer_lock); + if (mutex_lock_interruptible(&mst->i2c_buffer_lock) < 0) { + dprintk("could not acquire lock\n"); + return -EINVAL; + } + memset(mst->msg, 0, sizeof(struct i2c_msg)); + mst->msg[0].addr = i2c_addr >> 1; + mst->msg[0].flags = 0; + mst->msg[0].buf = mst->i2c_write_buffer; + mst->msg[0].len = 4; + + mst->device_rev = device_rev; + mst->i2c_adap = i2c_adap; + mst->i2c_addr = i2c_addr >> 1; + + if (device_rev == DIB7000P || device_rev == DIB8000) + mst->base_reg = 1024; + else + mst->base_reg = 768; + + mst->gated_tuner_i2c_adap.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo, + "DiBX000 tuner I2C bus", mst) != 0) + pr_err("could not initialize the tuner i2c_adapter\n"); + + mst->master_i2c_adap_gpio12.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->master_i2c_adap_gpio12, &dibx000_i2c_master_gpio12_xfer_algo, + "DiBX000 master GPIO12 I2C bus", mst) != 0) + pr_err("could not initialize the master i2c_adapter\n"); + + mst->master_i2c_adap_gpio34.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->master_i2c_adap_gpio34, &dibx000_i2c_master_gpio34_xfer_algo, + "DiBX000 master GPIO34 I2C bus", mst) != 0) + pr_err("could not initialize the master i2c_adapter\n"); + + mst->master_i2c_adap_gpio67.dev.parent = mst->i2c_adap->dev.parent; + if (i2c_adapter_init + (&mst->master_i2c_adap_gpio67, &dibx000_i2c_gated_gpio67_algo, + "DiBX000 master GPIO67 I2C bus", mst) != 0) + pr_err("could not initialize the master i2c_adapter\n"); + + /* initialize the i2c-master by closing the gate */ + dibx000_i2c_gate_ctrl(mst, mst->i2c_write_buffer, 0, 0); + + ret = (i2c_transfer(i2c_adap, mst->msg, 1) == 1); + mutex_unlock(&mst->i2c_buffer_lock); + + return ret; +} + +EXPORT_SYMBOL(dibx000_init_i2c_master); + +void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst) +{ + i2c_del_adapter(&mst->gated_tuner_i2c_adap); + i2c_del_adapter(&mst->master_i2c_adap_gpio12); + i2c_del_adapter(&mst->master_i2c_adap_gpio34); + i2c_del_adapter(&mst->master_i2c_adap_gpio67); +} +EXPORT_SYMBOL(dibx000_exit_i2c_master); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Common function the DiBcom demodulator family"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3