From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/dvb-frontends/dibx000_common.h | 278 +++++++++++++++++++++++++++ 1 file changed, 278 insertions(+) create mode 100644 drivers/media/dvb-frontends/dibx000_common.h (limited to 'drivers/media/dvb-frontends/dibx000_common.h') diff --git a/drivers/media/dvb-frontends/dibx000_common.h b/drivers/media/dvb-frontends/dibx000_common.h new file mode 100644 index 000000000..12b58f5c6 --- /dev/null +++ b/drivers/media/dvb-frontends/dibx000_common.h @@ -0,0 +1,278 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef DIBX000_COMMON_H +#define DIBX000_COMMON_H + +enum dibx000_i2c_interface { + DIBX000_I2C_INTERFACE_TUNER = 0, + DIBX000_I2C_INTERFACE_GPIO_1_2 = 1, + DIBX000_I2C_INTERFACE_GPIO_3_4 = 2, + DIBX000_I2C_INTERFACE_GPIO_6_7 = 3 +}; + +struct dibx000_i2c_master { +#define DIB3000MC 1 +#define DIB7000 2 +#define DIB7000P 11 +#define DIB7000MC 12 +#define DIB8000 13 + u16 device_rev; + + enum dibx000_i2c_interface selected_interface; + +/* struct i2c_adapter tuner_i2c_adap; */ + struct i2c_adapter gated_tuner_i2c_adap; + struct i2c_adapter master_i2c_adap_gpio12; + struct i2c_adapter master_i2c_adap_gpio34; + struct i2c_adapter master_i2c_adap_gpio67; + + struct i2c_adapter *i2c_adap; + u8 i2c_addr; + + u16 base_reg; + + /* for the I2C transfer */ + struct i2c_msg msg[34]; + u8 i2c_write_buffer[8]; + u8 i2c_read_buffer[2]; + struct mutex i2c_buffer_lock; +}; + +extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, + u16 device_rev, struct i2c_adapter *i2c_adap, + u8 i2c_addr); +extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master + *mst, + enum dibx000_i2c_interface + intf, int gating); +extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst); +extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst); +extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed); + +#define BAND_LBAND 0x01 +#define BAND_UHF 0x02 +#define BAND_VHF 0x04 +#define BAND_SBAND 0x08 +#define BAND_FM 0x10 +#define BAND_CBAND 0x20 + +#define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \ + (freq_kHz) <= 115000 ? BAND_FM : \ + (freq_kHz) <= 250000 ? BAND_VHF : \ + (freq_kHz) <= 863000 ? BAND_UHF : \ + (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND ) + +struct dibx000_agc_config { + /* defines the capabilities of this AGC-setting - using the BAND_-defines */ + u8 band_caps; + + u16 setup; + + u16 inv_gain; + u16 time_stabiliz; + + u8 alpha_level; + u16 thlock; + + u8 wbd_inv; + u16 wbd_ref; + u8 wbd_sel; + u8 wbd_alpha; + + u16 agc1_max; + u16 agc1_min; + u16 agc2_max; + u16 agc2_min; + + u8 agc1_pt1; + u8 agc1_pt2; + u8 agc1_pt3; + + u8 agc1_slope1; + u8 agc1_slope2; + + u8 agc2_pt1; + u8 agc2_pt2; + + u8 agc2_slope1; + u8 agc2_slope2; + + u8 alpha_mant; + u8 alpha_exp; + + u8 beta_mant; + u8 beta_exp; + + u8 perform_agc_softsplit; + + struct { + u16 min; + u16 max; + u16 min_thres; + u16 max_thres; + } split; +}; + +struct dibx000_bandwidth_config { + u32 internal; + u32 sampling; + + u8 pll_prediv; + u8 pll_ratio; + u8 pll_range; + u8 pll_reset; + u8 pll_bypass; + + u8 enable_refdiv; + u8 bypclk_div; + u8 IO_CLK_en_core; + u8 ADClkSrc; + u8 modulo; + + u16 sad_cfg; + + u32 ifreq; + u32 timf; + + u32 xtal_hz; +}; + +enum dibx000_adc_states { + DIBX000_SLOW_ADC_ON = 0, + DIBX000_SLOW_ADC_OFF, + DIBX000_ADC_ON, + DIBX000_ADC_OFF, + DIBX000_VBG_ENABLE, + DIBX000_VBG_DISABLE, +}; + +#define BANDWIDTH_TO_KHZ(v) ((v) / 1000) +#define BANDWIDTH_TO_HZ(v) ((v) * 1000) + +/* Chip output mode. */ +#define OUTMODE_HIGH_Z 0 +#define OUTMODE_MPEG2_PAR_GATED_CLK 1 +#define OUTMODE_MPEG2_PAR_CONT_CLK 2 +#define OUTMODE_MPEG2_SERIAL 7 +#define OUTMODE_DIVERSITY 4 +#define OUTMODE_MPEG2_FIFO 5 +#define OUTMODE_ANALOG_ADC 6 + +#define INPUT_MODE_OFF 0x11 +#define INPUT_MODE_DIVERSITY 0x12 +#define INPUT_MODE_MPEG 0x13 + +enum frontend_tune_state { + CT_TUNER_START = 10, + CT_TUNER_STEP_0, + CT_TUNER_STEP_1, + CT_TUNER_STEP_2, + CT_TUNER_STEP_3, + CT_TUNER_STEP_4, + CT_TUNER_STEP_5, + CT_TUNER_STEP_6, + CT_TUNER_STEP_7, + CT_TUNER_STOP, + + CT_AGC_START = 20, + CT_AGC_STEP_0, + CT_AGC_STEP_1, + CT_AGC_STEP_2, + CT_AGC_STEP_3, + CT_AGC_STEP_4, + CT_AGC_STOP, + + CT_DEMOD_START = 30, + CT_DEMOD_STEP_1, + CT_DEMOD_STEP_2, + CT_DEMOD_STEP_3, + CT_DEMOD_STEP_4, + CT_DEMOD_STEP_5, + CT_DEMOD_STEP_6, + CT_DEMOD_STEP_7, + CT_DEMOD_STEP_8, + CT_DEMOD_STEP_9, + CT_DEMOD_STEP_10, + CT_DEMOD_STEP_11, + CT_DEMOD_SEARCH_NEXT = 51, + CT_DEMOD_STEP_LOCKED, + CT_DEMOD_STOP, + + CT_DONE = 100, + CT_SHUTDOWN, + +}; + +struct dvb_frontend_parametersContext { +#define CHANNEL_STATUS_PARAMETERS_UNKNOWN 0x01 +#define CHANNEL_STATUS_PARAMETERS_SET 0x02 + u8 status; + u32 tune_time_estimation[2]; + s32 tps_available; + u16 tps[9]; +}; + +#define FE_STATUS_TUNE_FAILED 0 +#define FE_STATUS_TUNE_TIMED_OUT -1 +#define FE_STATUS_TUNE_TIME_TOO_SHORT -2 +#define FE_STATUS_TUNE_PENDING -3 +#define FE_STATUS_STD_SUCCESS -4 +#define FE_STATUS_FFT_SUCCESS -5 +#define FE_STATUS_DEMOD_SUCCESS -6 +#define FE_STATUS_LOCKED -7 +#define FE_STATUS_DATA_LOCKED -8 + +#define FE_CALLBACK_TIME_NEVER 0xffffffff + +#define DATA_BUS_ACCESS_MODE_8BIT 0x01 +#define DATA_BUS_ACCESS_MODE_16BIT 0x02 +#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10 + +struct dibGPIOFunction { +#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1 +#define BOARD_GPIO_COMPONENT_DEMOD 2 + u8 component; + +#define BOARD_GPIO_FUNCTION_BOARD_ON 1 +#define BOARD_GPIO_FUNCTION_BOARD_OFF 2 +#define BOARD_GPIO_FUNCTION_COMPONENT_ON 3 +#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4 +#define BOARD_GPIO_FUNCTION_SUBBAND_PWM 5 +#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO 6 + u8 function; + +/* mask, direction and value are used specify which GPIO to change GPIO0 + * is LSB and possible GPIO31 is MSB. The same bit-position as in the + * mask is used for the direction and the value. Direction == 1 is OUT, + * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN + * value has no meaning. + * + * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be + * used to do the PWM. Direction gives the PWModulator to be used. + * Value gives the PWM value in device-dependent scale. + */ + u32 mask; + u32 direction; + u32 value; +}; + +#define MAX_NB_SUBBANDS 8 +struct dibSubbandSelection { + u8 size; /* Actual number of subbands. */ + struct { + u16 f_mhz; + struct dibGPIOFunction gpio; + } subband[MAX_NB_SUBBANDS]; +}; + +#define DEMOD_TIMF_SET 0x00 +#define DEMOD_TIMF_GET 0x01 +#define DEMOD_TIMF_UPDATE 0x02 + +#define MPEG_ON_DIBTX 1 +#define DIV_ON_DIBTX 2 +#define ADC_ON_DIBTX 3 +#define DEMOUT_ON_HOSTBUS 4 +#define DIBTX_ON_HOSTBUS 5 +#define MPEG_ON_HOSTBUS 6 + +#endif -- cgit v1.2.3