From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/dvb-frontends/isl6421.c | 220 ++++++++++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 drivers/media/dvb-frontends/isl6421.c (limited to 'drivers/media/dvb-frontends/isl6421.c') diff --git a/drivers/media/dvb-frontends/isl6421.c b/drivers/media/dvb-frontends/isl6421.c new file mode 100644 index 000000000..43b0dfc6f --- /dev/null +++ b/drivers/media/dvb-frontends/isl6421.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * isl6421.h - driver for lnb supply and control ic ISL6421 + * + * Copyright (C) 2006 Andrew de Quincey + * Copyright (C) 2006 Oliver Endriss + * + * the project's page is at https://linuxtv.org + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include "isl6421.h" + +struct isl6421 { + u8 config; + u8 override_or; + u8 override_and; + struct i2c_adapter *i2c; + u8 i2c_addr; + bool is_off; +}; + +static int isl6421_set_voltage(struct dvb_frontend *fe, + enum fe_sec_voltage voltage) +{ + int ret; + u8 buf; + bool is_off; + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; + struct i2c_msg msg[2] = { + { + .addr = isl6421->i2c_addr, + .flags = 0, + .buf = &isl6421->config, + .len = 1, + }, { + .addr = isl6421->i2c_addr, + .flags = I2C_M_RD, + .buf = &buf, + .len = 1, + } + + }; + + isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); + + switch(voltage) { + case SEC_VOLTAGE_OFF: + is_off = true; + break; + case SEC_VOLTAGE_13: + is_off = false; + isl6421->config |= ISL6421_EN1; + break; + case SEC_VOLTAGE_18: + is_off = false; + isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1); + break; + default: + return -EINVAL; + } + + /* + * If LNBf were not powered on, disable dynamic current limit, as, + * according with datasheet, highly capacitive load on the output may + * cause a difficult start-up. + */ + if (isl6421->is_off && !is_off) + isl6421->config |= ISL6421_DCL; + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + ret = i2c_transfer(isl6421->i2c, msg, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + + /* Store off status now in case future commands fail */ + isl6421->is_off = is_off; + + /* On overflow, the device will try again after 900 ms (typically) */ + if (!is_off && (buf & ISL6421_OLF1)) + msleep(1000); + + /* Re-enable dynamic current limit */ + if ((isl6421->config & ISL6421_DCL) && + !(isl6421->override_or & ISL6421_DCL)) { + isl6421->config &= ~ISL6421_DCL; + + ret = i2c_transfer(isl6421->i2c, msg, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + } + + /* Check if overload flag is active. If so, disable power */ + if (!is_off && (buf & ISL6421_OLF1)) { + isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1); + ret = i2c_transfer(isl6421->i2c, msg, 1); + if (ret < 0) + return ret; + if (ret != 1) + return -EIO; + isl6421->is_off = true; + + dev_warn(&isl6421->i2c->dev, + "Overload current detected. disabling LNBf power\n"); + return -EINVAL; + } + + return 0; +} + +static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, + .buf = &isl6421->config, + .len = sizeof(isl6421->config) }; + + if (arg) + isl6421->config |= ISL6421_LLC1; + else + isl6421->config &= ~ISL6421_LLC1; + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static int isl6421_set_tone(struct dvb_frontend *fe, + enum fe_sec_tone_mode tone) +{ + struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv; + struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0, + .buf = &isl6421->config, + .len = sizeof(isl6421->config) }; + + switch (tone) { + case SEC_TONE_ON: + isl6421->config |= ISL6421_ENT1; + break; + case SEC_TONE_OFF: + isl6421->config &= ~ISL6421_ENT1; + break; + default: + return -EINVAL; + } + + isl6421->config |= isl6421->override_or; + isl6421->config &= isl6421->override_and; + + return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO; +} + +static void isl6421_release(struct dvb_frontend *fe) +{ + /* power off */ + isl6421_set_voltage(fe, SEC_VOLTAGE_OFF); + + /* free */ + kfree(fe->sec_priv); + fe->sec_priv = NULL; +} + +struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, + u8 override_set, u8 override_clear, bool override_tone) +{ + struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL); + if (!isl6421) + return NULL; + + /* default configuration */ + isl6421->config = ISL6421_ISEL1; + isl6421->i2c = i2c; + isl6421->i2c_addr = i2c_addr; + fe->sec_priv = isl6421; + + /* bits which should be forced to '1' */ + isl6421->override_or = override_set; + + /* bits which should be forced to '0' */ + isl6421->override_and = ~override_clear; + + /* detect if it is present or not */ + if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) { + kfree(isl6421); + fe->sec_priv = NULL; + return NULL; + } + + isl6421->is_off = true; + + /* install release callback */ + fe->ops.release_sec = isl6421_release; + + /* override frontend ops */ + fe->ops.set_voltage = isl6421_set_voltage; + fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage; + if (override_tone) + fe->ops.set_tone = isl6421_set_tone; + + return fe; +} +EXPORT_SYMBOL(isl6421_attach); + +MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421"); +MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3