From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/dvb-frontends/s5h1432.c | 390 ++++++++++++++++++++++++++++++++++ 1 file changed, 390 insertions(+) create mode 100644 drivers/media/dvb-frontends/s5h1432.c (limited to 'drivers/media/dvb-frontends/s5h1432.c') diff --git a/drivers/media/dvb-frontends/s5h1432.c b/drivers/media/dvb-frontends/s5h1432.c new file mode 100644 index 000000000..956e8ee4b --- /dev/null +++ b/drivers/media/dvb-frontends/s5h1432.c @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Samsung s5h1432 DVB-T demodulator driver + * + * Copyright (C) 2009 Bill Liu + */ + +#include +#include +#include +#include +#include +#include +#include +#include "s5h1432.h" + +struct s5h1432_state { + + struct i2c_adapter *i2c; + + /* configuration settings */ + const struct s5h1432_config *config; + + struct dvb_frontend frontend; + + enum fe_modulation current_modulation; + unsigned int first_tune:1; + + u32 current_frequency; + int if_freq; + + u8 inversion; +}; + +static int debug; + +#define dprintk(arg...) do { \ + if (debug) \ + printk(arg); \ + } while (0) + +static int s5h1432_writereg(struct s5h1432_state *state, + u8 addr, u8 reg, u8 data) +{ + int ret; + u8 buf[] = { reg, data }; + + struct i2c_msg msg = {.addr = addr, .flags = 0, .buf = buf, .len = 2 }; + + ret = i2c_transfer(state->i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n", + __func__, addr, reg, data, ret); + + return (ret != 1) ? -1 : 0; +} + +static u8 s5h1432_readreg(struct s5h1432_state *state, u8 addr, u8 reg) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + {.addr = addr, .flags = 0, .buf = b0, .len = 1}, + {.addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 1} + }; + + ret = i2c_transfer(state->i2c, msg, 2); + + if (ret != 2) + printk(KERN_ERR "%s: readreg error (ret == %i)\n", + __func__, ret); + return b1[0]; +} + +static int s5h1432_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int s5h1432_set_channel_bandwidth(struct dvb_frontend *fe, + u32 bandwidth) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + u8 reg = 0; + + /* Register [0x2E] bit 3:2 : 8MHz = 0; 7MHz = 1; 6MHz = 2 */ + reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x2E); + reg &= ~(0x0C); + switch (bandwidth) { + case 6: + reg |= 0x08; + break; + case 7: + reg |= 0x04; + break; + case 8: + reg |= 0x00; + break; + default: + return 0; + } + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2E, reg); + return 1; +} + +static int s5h1432_set_IF(struct dvb_frontend *fe, u32 ifFreqHz) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + switch (ifFreqHz) { + case TAIWAN_HI_IF_FREQ_44_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x15); + break; + case EUROPE_HI_IF_FREQ_36_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0x40); + break; + case IF_FREQ_6_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xe0); + break; + case IF_FREQ_3point3_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); + break; + case IF_FREQ_3point5_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x55); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xED); + break; + case IF_FREQ_4_MHZ: + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0xAA); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0xAA); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEA); + break; + default: + { + u32 value = 0; + value = (u32) (((48000 - (ifFreqHz / 1000)) * 512 * + (u32) 32768) / (48 * 1000)); + printk(KERN_INFO + "Default IFFreq %d :reg value = 0x%x\n", + ifFreqHz, value); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, + (u8) value & 0xFF); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, + (u8) (value >> 8) & 0xFF); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, + (u8) (value >> 16) & 0xFF); + break; + } + + } + + return 1; +} + +/* Talk to the demod, set the FEC, GUARD, QAM settings etc */ +static int s5h1432_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + u32 dvb_bandwidth = 8; + struct s5h1432_state *state = fe->demodulator_priv; + + if (p->frequency == state->current_frequency) { + /*current_frequency = p->frequency; */ + /*state->current_frequency = p->frequency; */ + } else { + fe->ops.tuner_ops.set_params(fe); + msleep(300); + s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); + switch (p->bandwidth_hz) { + case 6000000: + dvb_bandwidth = 6; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 7000000: + dvb_bandwidth = 7; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 8000000: + dvb_bandwidth = 8; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + default: + return 0; + } + /*fe->ops.tuner_ops.set_params(fe); */ +/*Soft Reset chip*/ + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + s5h1432_set_channel_bandwidth(fe, dvb_bandwidth); + switch (p->bandwidth_hz) { + case 6000000: + dvb_bandwidth = 6; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 7000000: + dvb_bandwidth = 7; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + case 8000000: + dvb_bandwidth = 8; + s5h1432_set_IF(fe, IF_FREQ_4_MHZ); + break; + default: + return 0; + } + /*fe->ops.tuner_ops.set_params(fe); */ + /*Soft Reset chip*/ + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + } + + state->current_frequency = p->frequency; + + return 0; +} + +static int s5h1432_init(struct dvb_frontend *fe) +{ + struct s5h1432_state *state = fe->demodulator_priv; + + u8 reg = 0; + state->current_frequency = 0; + printk(KERN_INFO " s5h1432_init().\n"); + + /*Set VSB mode as default, this also does a soft reset */ + /*Initialize registers */ + + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x04, 0xa8); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x05, 0x01); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x07, 0x70); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x19, 0x80); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1b, 0x9D); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1c, 0x30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1d, 0x20); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x1B); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x2e, 0x40); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, 0x84); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x50, 0x5a); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x5a, 0xd3); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x68, 0x50); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xb8, 0x3c); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xc4, 0x10); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xcc, 0x9c); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xDA, 0x00); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe1, 0x94); + /* s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf4, 0xa1); */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xf9, 0x00); + + /*For NXP tuner*/ + + /*Set 3.3MHz as default IF frequency */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe4, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe5, 0x66); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0xe7, 0xEE); + /* Set reg 0x1E to get the full dynamic range */ + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x1e, 0x31); + + /* Mode setting in demod */ + reg = s5h1432_readreg(state, S5H1432_I2C_TOP_ADDR, 0x42); + reg |= 0x80; + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x42, reg); + /* Serial mode */ + + /* Soft Reset chip */ + + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1a); + msleep(30); + s5h1432_writereg(state, S5H1432_I2C_TOP_ADDR, 0x09, 0x1b); + + + return 0; +} + +static int s5h1432_read_status(struct dvb_frontend *fe, enum fe_status *status) +{ + return 0; +} + +static int s5h1432_read_signal_strength(struct dvb_frontend *fe, + u16 *signal_strength) +{ + return 0; +} + +static int s5h1432_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + return 0; +} + +static int s5h1432_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + + return 0; +} + +static int s5h1432_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + return 0; +} + +static int s5h1432_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + return 0; +} + +static void s5h1432_release(struct dvb_frontend *fe) +{ + struct s5h1432_state *state = fe->demodulator_priv; + kfree(state); +} + +static const struct dvb_frontend_ops s5h1432_ops; + +struct dvb_frontend *s5h1432_attach(const struct s5h1432_config *config, + struct i2c_adapter *i2c) +{ + struct s5h1432_state *state = NULL; + + printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n"); + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct s5h1432_state), GFP_KERNEL); + if (!state) + return NULL; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->current_modulation = QAM_16; + state->inversion = state->config->inversion; + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &s5h1432_ops, + sizeof(struct dvb_frontend_ops)); + + state->frontend.demodulator_priv = state; + + return &state->frontend; +} +EXPORT_SYMBOL(s5h1432_attach); + +static const struct dvb_frontend_ops s5h1432_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Samsung s5h1432 DVB-T Frontend", + .frequency_min_hz = 177 * MHz, + .frequency_max_hz = 858 * MHz, + .frequency_stepsize_hz = 166666, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER}, + + .init = s5h1432_init, + .sleep = s5h1432_sleep, + .set_frontend = s5h1432_set_frontend, + .get_tune_settings = s5h1432_get_tune_settings, + .read_status = s5h1432_read_status, + .read_ber = s5h1432_read_ber, + .read_signal_strength = s5h1432_read_signal_strength, + .read_snr = s5h1432_read_snr, + .read_ucblocks = s5h1432_read_ucblocks, + .release = s5h1432_release, +}; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Enable verbose debug messages"); + +MODULE_DESCRIPTION("Samsung s5h1432 DVB-T Demodulator driver"); +MODULE_AUTHOR("Bill Liu"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3