From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/i2c/bt866.c | 214 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 214 insertions(+) create mode 100644 drivers/media/i2c/bt866.c (limited to 'drivers/media/i2c/bt866.c') diff --git a/drivers/media/i2c/bt866.c b/drivers/media/i2c/bt866.c new file mode 100644 index 000000000..d632d9a07 --- /dev/null +++ b/drivers/media/i2c/bt866.c @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + bt866 - BT866 Digital Video Encoder (Rockwell Part) + + Copyright (C) 1999 Mike Bernson + Copyright (C) 1998 Dave Perks + + Modifications for LML33/DC10plus unified driver + Copyright (C) 2000 Serguei Miridonov + + This code was modify/ported from the saa7111 driver written + by Dave Perks. + + This code was adapted for the bt866 by Christer Weinigel and ported + to 2.6 by Martin Samuelsson. + +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("Brooktree-866 video encoder driver"); +MODULE_AUTHOR("Mike Bernson & Dave Perks"); +MODULE_LICENSE("GPL"); + +static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0-1)"); + + +/* ----------------------------------------------------------------------- */ + +struct bt866 { + struct v4l2_subdev sd; + u8 reg[256]; +}; + +static inline struct bt866 *to_bt866(struct v4l2_subdev *sd) +{ + return container_of(sd, struct bt866, sd); +} + +static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data) +{ + struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd); + u8 buffer[2]; + int err; + + buffer[0] = subaddr; + buffer[1] = data; + + encoder->reg[subaddr] = data; + + v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data); + + for (err = 0; err < 3;) { + if (i2c_master_send(client, buffer, 2) == 2) + break; + err++; + v4l_warn(client, "error #%d writing to 0x%02x\n", + err, subaddr); + schedule_timeout_interruptible(msecs_to_jiffies(100)); + } + if (err == 3) { + v4l_warn(client, "giving up\n"); + return -1; + } + + return 0; +} + +static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) +{ + v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std); + + /* Only PAL supported by this driver at the moment! */ + if (!(std & V4L2_STD_NTSC)) + return -EINVAL; + return 0; +} + +static int bt866_s_routing(struct v4l2_subdev *sd, + u32 input, u32 output, u32 config) +{ + static const __u8 init[] = { + 0xc8, 0xcc, /* CRSCALE */ + 0xca, 0x91, /* CBSCALE */ + 0xcc, 0x24, /* YC16 | OSDNUM */ + 0xda, 0x00, /* */ + 0xdc, 0x24, /* SETMODE | PAL */ + 0xde, 0x02, /* EACTIVE */ + + /* overlay colors */ + 0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */ + 0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */ + 0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */ + 0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */ + 0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */ + 0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */ + 0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */ + 0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */ + + 0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */ + 0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */ + 0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */ + 0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */ + 0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */ + 0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */ + 0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */ + 0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */ + }; + struct bt866 *encoder = to_bt866(sd); + u8 val; + int i; + + for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2) + bt866_write(encoder, init[i], init[i+1]); + + val = encoder->reg[0xdc]; + + if (input == 0) + val |= 0x40; /* CBSWAP */ + else + val &= ~0x40; /* !CBSWAP */ + + bt866_write(encoder, 0xdc, val); + + val = encoder->reg[0xcc]; + if (input == 2) + val |= 0x01; /* OSDBAR */ + else + val &= ~0x01; /* !OSDBAR */ + bt866_write(encoder, 0xcc, val); + + v4l2_dbg(1, debug, sd, "set input %d\n", input); + + switch (input) { + case 0: + case 1: + case 2: + break; + default: + return -EINVAL; + } + return 0; +} + +#if 0 +/* Code to setup square pixels, might be of some use in the future, + but is currently unused. */ + val = encoder->reg[0xdc]; + if (*iarg) + val |= 1; /* SQUARE */ + else + val &= ~1; /* !SQUARE */ + bt866_write(client, 0xdc, val); +#endif + +/* ----------------------------------------------------------------------- */ + +static const struct v4l2_subdev_video_ops bt866_video_ops = { + .s_std_output = bt866_s_std_output, + .s_routing = bt866_s_routing, +}; + +static const struct v4l2_subdev_ops bt866_ops = { + .video = &bt866_video_ops, +}; + +static int bt866_probe(struct i2c_client *client) +{ + struct bt866 *encoder; + struct v4l2_subdev *sd; + + v4l_info(client, "chip found @ 0x%x (%s)\n", + client->addr << 1, client->adapter->name); + + encoder = devm_kzalloc(&client->dev, sizeof(*encoder), GFP_KERNEL); + if (encoder == NULL) + return -ENOMEM; + sd = &encoder->sd; + v4l2_i2c_subdev_init(sd, client, &bt866_ops); + return 0; +} + +static void bt866_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + v4l2_device_unregister_subdev(sd); +} + +static const struct i2c_device_id bt866_id[] = { + { "bt866", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bt866_id); + +static struct i2c_driver bt866_driver = { + .driver = { + .name = "bt866", + }, + .probe_new = bt866_probe, + .remove = bt866_remove, + .id_table = bt866_id, +}; + +module_i2c_driver(bt866_driver); -- cgit v1.2.3