From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/pci/ddbridge/ddbridge-mci.c | 169 ++++++++++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 drivers/media/pci/ddbridge/ddbridge-mci.c (limited to 'drivers/media/pci/ddbridge/ddbridge-mci.c') diff --git a/drivers/media/pci/ddbridge/ddbridge-mci.c b/drivers/media/pci/ddbridge/ddbridge-mci.c new file mode 100644 index 000000000..a006cb0fa --- /dev/null +++ b/drivers/media/pci/ddbridge/ddbridge-mci.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ddbridge-mci.c: Digital Devices microcode interface + * + * Copyright (C) 2017-2018 Digital Devices GmbH + * Ralph Metzler + * Marcus Metzler + */ + +#include "ddbridge.h" +#include "ddbridge-io.h" +#include "ddbridge-mci.h" + +static LIST_HEAD(mci_list); + +static int mci_reset(struct mci *state) +{ + struct ddb_link *link = state->base->link; + u32 status = 0; + u32 timeout = 40; + + ddblwritel(link, MCI_CONTROL_RESET, MCI_CONTROL); + ddblwritel(link, 0, MCI_CONTROL + 4); /* 1= no internal init */ + msleep(300); + ddblwritel(link, 0, MCI_CONTROL); + + while (1) { + status = ddblreadl(link, MCI_CONTROL); + if ((status & MCI_CONTROL_READY) == MCI_CONTROL_READY) + break; + if (--timeout == 0) + break; + msleep(50); + } + if ((status & MCI_CONTROL_READY) == 0) + return -1; + if (link->ids.device == 0x0009) + ddblwritel(link, SX8_TSCONFIG_MODE_NORMAL, SX8_TSCONFIG); + return 0; +} + +int ddb_mci_config(struct mci *state, u32 config) +{ + struct ddb_link *link = state->base->link; + + if (link->ids.device != 0x0009) + return -EINVAL; + ddblwritel(link, config, SX8_TSCONFIG); + return 0; +} + +static int _mci_cmd_unlocked(struct mci *state, + u32 *cmd, u32 cmd_len, + u32 *res, u32 res_len) +{ + struct ddb_link *link = state->base->link; + u32 i, val; + unsigned long stat; + + val = ddblreadl(link, MCI_CONTROL); + if (val & (MCI_CONTROL_RESET | MCI_CONTROL_START_COMMAND)) + return -EIO; + if (cmd && cmd_len) + for (i = 0; i < cmd_len; i++) + ddblwritel(link, cmd[i], MCI_COMMAND + i * 4); + val |= (MCI_CONTROL_START_COMMAND | MCI_CONTROL_ENABLE_DONE_INTERRUPT); + ddblwritel(link, val, MCI_CONTROL); + + stat = wait_for_completion_timeout(&state->base->completion, HZ); + if (stat == 0) { + dev_warn(state->base->dev, "MCI-%d: MCI timeout\n", state->nr); + return -EIO; + } + if (res && res_len) + for (i = 0; i < res_len; i++) + res[i] = ddblreadl(link, MCI_RESULT + i * 4); + return 0; +} + +int ddb_mci_cmd(struct mci *state, + struct mci_command *command, + struct mci_result *result) +{ + int stat; + + mutex_lock(&state->base->mci_lock); + stat = _mci_cmd_unlocked(state, + (u32 *)command, sizeof(*command) / sizeof(u32), + (u32 *)result, sizeof(*result) / sizeof(u32)); + mutex_unlock(&state->base->mci_lock); + return stat; +} + +static void mci_handler(void *priv) +{ + struct mci_base *base = (struct mci_base *)priv; + + complete(&base->completion); +} + +static struct mci_base *match_base(void *key) +{ + struct mci_base *p; + + list_for_each_entry(p, &mci_list, mci_list) + if (p->key == key) + return p; + return NULL; +} + +static int probe(struct mci *state) +{ + mci_reset(state); + return 0; +} + +struct dvb_frontend +*ddb_mci_attach(struct ddb_input *input, struct mci_cfg *cfg, int nr, + int (**fn_set_input)(struct dvb_frontend *fe, int input)) +{ + struct ddb_port *port = input->port; + struct ddb *dev = port->dev; + struct ddb_link *link = &dev->link[port->lnr]; + struct mci_base *base; + struct mci *state; + void *key = cfg->type ? (void *)port : (void *)link; + + state = kzalloc(cfg->state_size, GFP_KERNEL); + if (!state) + return NULL; + + base = match_base(key); + if (base) { + base->count++; + state->base = base; + } else { + base = kzalloc(cfg->base_size, GFP_KERNEL); + if (!base) + goto fail; + base->key = key; + base->count = 1; + base->link = link; + base->dev = dev->dev; + mutex_init(&base->mci_lock); + mutex_init(&base->tuner_lock); + ddb_irq_set(dev, link->nr, 0, mci_handler, base); + init_completion(&base->completion); + state->base = base; + if (probe(state) < 0) { + kfree(base); + goto fail; + } + list_add(&base->mci_list, &mci_list); + if (cfg->base_init) + cfg->base_init(base); + } + memcpy(&state->fe.ops, cfg->fe_ops, sizeof(struct dvb_frontend_ops)); + state->fe.demodulator_priv = state; + state->nr = nr; + *fn_set_input = cfg->set_input; + state->tuner = nr; + state->demod = nr; + if (cfg->init) + cfg->init(state); + return &state->fe; +fail: + kfree(state); + return NULL; +} -- cgit v1.2.3