From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/pci/mantis/mantis_cards.c | 306 ++++++++++++++++++++++++++++++++ 1 file changed, 306 insertions(+) create mode 100644 drivers/media/pci/mantis/mantis_cards.c (limited to 'drivers/media/pci/mantis/mantis_cards.c') diff --git a/drivers/media/pci/mantis/mantis_cards.c b/drivers/media/pci/mantis/mantis_cards.c new file mode 100644 index 000000000..906e4500d --- /dev/null +++ b/drivers/media/pci/mantis/mantis_cards.c @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "mantis_common.h" + +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" +#include "mantis_input.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 0 (no)"); + +static int devs; + +#define DRIVER_NAME "Mantis" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static irqreturn_t mantis_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(!mantis)) + return IRQ_NONE; + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + spin_lock(&mantis->intmask_lock); + mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ1, + MANTIS_INT_MASK); + spin_unlock(&mantis->intmask_lock); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->busy_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, " Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int mantis_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct mantis_pci_drvdata *drvdata; + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err; + + mantis = kzalloc(sizeof(*mantis), GFP_KERNEL); + if (!mantis) + return -ENOMEM; + + drvdata = (void *)pci_id->driver_data; + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = drvdata->hwconfig; + config->irq_handler = &mantis_irq_handler; + mantis->hwconfig = config; + mantis->rc_map_name = drvdata->rc_map_name; + + spin_lock_init(&mantis->intmask_lock); + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto err_free_mantis; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto err_pci_exit; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto err_pci_exit; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto err_i2c_exit; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto err_i2c_exit; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto err_dma_exit; + } + + err = mantis_input_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, + "ERROR: Mantis DVB initialization failed <%d>", err); + goto err_dvb_exit; + } + + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err); + goto err_input_exit; + } + + devs++; + + return 0; + +err_input_exit: + mantis_input_exit(mantis); + +err_dvb_exit: + mantis_dvb_exit(mantis); + +err_dma_exit: + mantis_dma_exit(mantis); + +err_i2c_exit: + mantis_i2c_exit(mantis); + +err_pci_exit: + mantis_pci_exit(mantis); + +err_free_mantis: + kfree(mantis); + + return err; +} + +static void mantis_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + + mantis_uart_exit(mantis); + mantis_input_exit(mantis); + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; +} + +static const struct pci_device_id mantis_pci_table[] = { + MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config, + RC_MAP_TECHNISAT_TS35), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config, + NULL), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config, + NULL), + MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2040_config, + RC_MAP_TERRATEC_CINERGY_C_PCI), + MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config, + RC_MAP_TERRATEC_CINERGY_S2_HD), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config, + NULL), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config, + NULL), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config, + RC_MAP_TWINHAN_DTV_CAB_CI), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config, + RC_MAP_TWINHAN_DTV_CAB_CI), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config, + NULL), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config, + NULL), + { } +}; + +MODULE_DEVICE_TABLE(pci, mantis_pci_table); + +static struct pci_driver mantis_pci_driver = { + .name = DRIVER_NAME, + .id_table = mantis_pci_table, + .probe = mantis_pci_probe, + .remove = mantis_pci_remove, +}; + +module_pci_driver(mantis_pci_driver); + +MODULE_DESCRIPTION("MANTIS driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3