From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/pci/saa7134/saa7134-i2c.c | 456 ++++++++++++++++++++++++++++++++ 1 file changed, 456 insertions(+) create mode 100644 drivers/media/pci/saa7134/saa7134-i2c.c (limited to 'drivers/media/pci/saa7134/saa7134-i2c.c') diff --git a/drivers/media/pci/saa7134/saa7134-i2c.c b/drivers/media/pci/saa7134/saa7134-i2c.c new file mode 100644 index 000000000..04e857653 --- /dev/null +++ b/drivers/media/pci/saa7134/saa7134-i2c.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * device driver for philips saa7134 based TV cards + * i2c interface support + * + * (c) 2001,02 Gerd Knorr [SuSE Labs] + */ + +#include "saa7134.h" +#include "saa7134-reg.h" + +#include +#include +#include +#include +#include + +#include + +/* ----------------------------------------------------------- */ + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug,"enable debug messages [i2c]"); + +static unsigned int i2c_scan; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time"); + +#define i2c_dbg(level, fmt, arg...) do { \ + if (i2c_debug == level) \ + printk(KERN_DEBUG pr_fmt("i2c: " fmt), ## arg); \ + } while (0) + +#define i2c_cont(level, fmt, arg...) do { \ + if (i2c_debug == level) \ + pr_cont(fmt, ## arg); \ + } while (0) + +#define I2C_WAIT_DELAY 32 +#define I2C_WAIT_RETRY 16 + +/* ----------------------------------------------------------- */ + +static char *str_i2c_status[] = { + "IDLE", "DONE_STOP", "BUSY", "TO_SCL", "TO_ARB", "DONE_WRITE", + "DONE_READ", "DONE_WRITE_TO", "DONE_READ_TO", "NO_DEVICE", + "NO_ACKN", "BUS_ERR", "ARB_LOST", "SEQ_ERR", "ST_ERR", "SW_ERR" +}; + +enum i2c_status { + IDLE = 0, // no I2C command pending + DONE_STOP = 1, // I2C command done and STOP executed + BUSY = 2, // executing I2C command + TO_SCL = 3, // executing I2C command, time out on clock stretching + TO_ARB = 4, // time out on arbitration trial, still trying + DONE_WRITE = 5, // I2C command done and awaiting next write command + DONE_READ = 6, // I2C command done and awaiting next read command + DONE_WRITE_TO = 7, // see 5, and time out on status echo + DONE_READ_TO = 8, // see 6, and time out on status echo + NO_DEVICE = 9, // no acknowledge on device slave address + NO_ACKN = 10, // no acknowledge after data byte transfer + BUS_ERR = 11, // bus error + ARB_LOST = 12, // arbitration lost during transfer + SEQ_ERR = 13, // erroneous programming sequence + ST_ERR = 14, // wrong status echoing + SW_ERR = 15 // software error +}; + +static char *str_i2c_attr[] = { + "NOP", "STOP", "CONTINUE", "START" +}; + +enum i2c_attr { + NOP = 0, // no operation on I2C bus + STOP = 1, // stop condition, no associated byte transfer + CONTINUE = 2, // continue with byte transfer + START = 3 // start condition with byte transfer +}; + +static inline enum i2c_status i2c_get_status(struct saa7134_dev *dev) +{ + enum i2c_status status; + + status = saa_readb(SAA7134_I2C_ATTR_STATUS) & 0x0f; + i2c_dbg(2, "i2c stat <= %s\n", str_i2c_status[status]); + return status; +} + +static inline void i2c_set_status(struct saa7134_dev *dev, + enum i2c_status status) +{ + i2c_dbg(2, "i2c stat => %s\n", str_i2c_status[status]); + saa_andorb(SAA7134_I2C_ATTR_STATUS,0x0f,status); +} + +static inline void i2c_set_attr(struct saa7134_dev *dev, enum i2c_attr attr) +{ + i2c_dbg(2, "i2c attr => %s\n", str_i2c_attr[attr]); + saa_andorb(SAA7134_I2C_ATTR_STATUS,0xc0,attr << 6); +} + +static inline int i2c_is_error(enum i2c_status status) +{ + switch (status) { + case NO_DEVICE: + case NO_ACKN: + case BUS_ERR: + case ARB_LOST: + case SEQ_ERR: + case ST_ERR: + return true; + default: + return false; + } +} + +static inline int i2c_is_idle(enum i2c_status status) +{ + switch (status) { + case IDLE: + case DONE_STOP: + return true; + default: + return false; + } +} + +static inline int i2c_is_busy(enum i2c_status status) +{ + switch (status) { + case BUSY: + case TO_SCL: + case TO_ARB: + return true; + default: + return false; + } +} + +static int i2c_is_busy_wait(struct saa7134_dev *dev) +{ + enum i2c_status status; + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + status = i2c_get_status(dev); + if (!i2c_is_busy(status)) + break; + saa_wait(I2C_WAIT_DELAY); + } + if (I2C_WAIT_RETRY == count) + return false; + return true; +} + +static int i2c_reset(struct saa7134_dev *dev) +{ + enum i2c_status status; + int count; + + i2c_dbg(2, "i2c reset\n"); + status = i2c_get_status(dev); + if (!i2c_is_error(status)) + return true; + i2c_set_status(dev,status); + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + status = i2c_get_status(dev); + if (!i2c_is_error(status)) + break; + udelay(I2C_WAIT_DELAY); + } + if (I2C_WAIT_RETRY == count) + return false; + + if (!i2c_is_idle(status)) + return false; + + i2c_set_attr(dev,NOP); + return true; +} + +static inline int i2c_send_byte(struct saa7134_dev *dev, + enum i2c_attr attr, + unsigned char data) +{ + enum i2c_status status; + __u32 dword; + + /* have to write both attr + data in one 32bit word */ + dword = saa_readl(SAA7134_I2C_ATTR_STATUS >> 2); + dword &= 0x0f; + dword |= (attr << 6); + dword |= ((__u32)data << 8); + dword |= 0x00 << 16; /* 100 kHz */ +// dword |= 0x40 << 16; /* 400 kHz */ + dword |= 0xf0 << 24; + saa_writel(SAA7134_I2C_ATTR_STATUS >> 2, dword); + i2c_dbg(2, "i2c data => 0x%x\n", data); + + if (!i2c_is_busy_wait(dev)) + return -EIO; + status = i2c_get_status(dev); + if (i2c_is_error(status)) + return -EIO; + return 0; +} + +static inline int i2c_recv_byte(struct saa7134_dev *dev) +{ + enum i2c_status status; + unsigned char data; + + i2c_set_attr(dev,CONTINUE); + if (!i2c_is_busy_wait(dev)) + return -EIO; + status = i2c_get_status(dev); + if (i2c_is_error(status)) + return -EIO; + data = saa_readb(SAA7134_I2C_DATA); + i2c_dbg(2, "i2c data <= 0x%x\n", data); + return data; +} + +static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + struct saa7134_dev *dev = i2c_adap->algo_data; + enum i2c_status status; + unsigned char data; + int addr,rc,i,byte; + + status = i2c_get_status(dev); + if (!i2c_is_idle(status)) + if (!i2c_reset(dev)) + return -EIO; + + i2c_dbg(2, "start xfer\n"); + i2c_dbg(1, "i2c xfer:"); + for (i = 0; i < num; i++) { + if (!(msgs[i].flags & I2C_M_NOSTART) || 0 == i) { + /* send address */ + i2c_dbg(2, "send address\n"); + addr = msgs[i].addr << 1; + if (msgs[i].flags & I2C_M_RD) + addr |= 1; + if (i > 0 && msgs[i].flags & + I2C_M_RD && msgs[i].addr != 0x40 && + msgs[i].addr != 0x41 && + msgs[i].addr != 0x19) { + /* workaround for a saa7134 i2c bug + * needed to talk to the mt352 demux + * thanks to pinnacle for the hint */ + int quirk = 0xfe; + i2c_cont(1, " [%02x quirk]", quirk); + i2c_send_byte(dev,START,quirk); + i2c_recv_byte(dev); + } + i2c_cont(1, " < %02x", addr); + rc = i2c_send_byte(dev,START,addr); + if (rc < 0) + goto err; + } + if (msgs[i].flags & I2C_M_RD) { + /* read bytes */ + i2c_dbg(2, "read bytes\n"); + for (byte = 0; byte < msgs[i].len; byte++) { + i2c_cont(1, " ="); + rc = i2c_recv_byte(dev); + if (rc < 0) + goto err; + i2c_cont(1, "%02x", rc); + msgs[i].buf[byte] = rc; + } + /* discard mysterious extra byte when reading + from Samsung S5H1411. i2c bus gets error + if we do not. */ + if (0x19 == msgs[i].addr) { + i2c_cont(1, " ?"); + rc = i2c_recv_byte(dev); + if (rc < 0) + goto err; + i2c_cont(1, "%02x", rc); + } + } else { + /* write bytes */ + i2c_dbg(2, "write bytes\n"); + for (byte = 0; byte < msgs[i].len; byte++) { + data = msgs[i].buf[byte]; + i2c_cont(1, " %02x", data); + rc = i2c_send_byte(dev,CONTINUE,data); + if (rc < 0) + goto err; + } + } + } + i2c_dbg(2, "xfer done\n"); + i2c_cont(1, " >"); + i2c_set_attr(dev,STOP); + rc = -EIO; + if (!i2c_is_busy_wait(dev)) + goto err; + status = i2c_get_status(dev); + if (i2c_is_error(status)) + goto err; + /* ensure that the bus is idle for at least one bit slot */ + msleep(1); + + i2c_cont(1, "\n"); + return num; + err: + if (1 == i2c_debug) { + status = i2c_get_status(dev); + i2c_cont(1, " ERROR: %s\n", str_i2c_status[status]); + } + return rc; +} + +/* ----------------------------------------------------------- */ + +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm saa7134_algo = { + .master_xfer = saa7134_i2c_xfer, + .functionality = functionality, +}; + +static const struct i2c_adapter saa7134_adap_template = { + .owner = THIS_MODULE, + .name = "saa7134", + .algo = &saa7134_algo, +}; + +static const struct i2c_client saa7134_client_template = { + .name = "saa7134 internal", +}; + +/* ----------------------------------------------------------- */ + +/* + * On Medion 7134 reading the SAA7134 chip config EEPROM needs DVB-T + * demod i2c gate closed due to an address clash between this EEPROM + * and the demod one. + */ +static void saa7134_i2c_eeprom_md7134_gate(struct saa7134_dev *dev) +{ + u8 subaddr = 0x7, dmdregval; + u8 data[2]; + int ret; + struct i2c_msg i2cgatemsg_r[] = { {.addr = 0x08, .flags = 0, + .buf = &subaddr, .len = 1}, + {.addr = 0x08, + .flags = I2C_M_RD, + .buf = &dmdregval, .len = 1} + }; + struct i2c_msg i2cgatemsg_w[] = { {.addr = 0x08, .flags = 0, + .buf = data, .len = 2} }; + + ret = i2c_transfer(&dev->i2c_adap, i2cgatemsg_r, 2); + if ((ret == 2) && (dmdregval & 0x2)) { + pr_debug("%s: DVB-T demod i2c gate was left open\n", + dev->name); + + data[0] = subaddr; + data[1] = (dmdregval & ~0x2); + if (i2c_transfer(&dev->i2c_adap, i2cgatemsg_w, 1) != 1) + pr_err("%s: EEPROM i2c gate close failure\n", + dev->name); + } +} + +static int +saa7134_i2c_eeprom(struct saa7134_dev *dev, unsigned char *eedata, int len) +{ + unsigned char buf; + int i,err; + + if (dev->board == SAA7134_BOARD_MD7134) + saa7134_i2c_eeprom_md7134_gate(dev); + + dev->i2c_client.addr = 0xa0 >> 1; + buf = 0; + if (1 != (err = i2c_master_send(&dev->i2c_client,&buf,1))) { + pr_info("%s: Huh, no eeprom present (err=%d)?\n", + dev->name,err); + return -1; + } + if (len != (err = i2c_master_recv(&dev->i2c_client,eedata,len))) { + pr_warn("%s: i2c eeprom read error (err=%d)\n", + dev->name,err); + return -1; + } + + for (i = 0; i < len; i += 16) { + int size = (len - i) > 16 ? 16 : len - i; + + pr_info("i2c eeprom %02x: %*ph\n", i, size, &eedata[i]); + } + + return 0; +} + +static char *i2c_devs[128] = { + [ 0x20 ] = "mpeg encoder (saa6752hs)", + [ 0xa0 >> 1 ] = "eeprom", + [ 0xc0 >> 1 ] = "tuner (analog)", + [ 0x86 >> 1 ] = "tda9887", + [ 0x5a >> 1 ] = "remote control", +}; + +static void do_i2c_scan(struct i2c_client *c) +{ + unsigned char buf; + int i,rc; + + for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) { + c->addr = i; + rc = i2c_master_recv(c,&buf,0); + if (rc < 0) + continue; + pr_info("i2c scan: found device @ 0x%x [%s]\n", + i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +int saa7134_i2c_register(struct saa7134_dev *dev) +{ + dev->i2c_adap = saa7134_adap_template; + dev->i2c_adap.dev.parent = &dev->pci->dev; + strscpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name)); + dev->i2c_adap.algo_data = dev; + i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev); + i2c_add_adapter(&dev->i2c_adap); + + dev->i2c_client = saa7134_client_template; + dev->i2c_client.adapter = &dev->i2c_adap; + + saa7134_i2c_eeprom(dev,dev->eedata,sizeof(dev->eedata)); + if (i2c_scan) + do_i2c_scan(&dev->i2c_client); + + /* Instantiate the IR receiver device, if present */ + saa7134_probe_i2c_ir(dev); + return 0; +} + +int saa7134_i2c_unregister(struct saa7134_dev *dev) +{ + i2c_del_adapter(&dev->i2c_adap); + return 0; +} -- cgit v1.2.3