From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/pci/solo6x10/solo6x10-tw28.c | 863 +++++++++++++++++++++++++++++ 1 file changed, 863 insertions(+) create mode 100644 drivers/media/pci/solo6x10/solo6x10-tw28.c (limited to 'drivers/media/pci/solo6x10/solo6x10-tw28.c') diff --git a/drivers/media/pci/solo6x10/solo6x10-tw28.c b/drivers/media/pci/solo6x10/solo6x10-tw28.c new file mode 100644 index 000000000..1b7c22a9b --- /dev/null +++ b/drivers/media/pci/solo6x10/solo6x10-tw28.c @@ -0,0 +1,863 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2010-2013 Bluecherry, LLC + * + * Original author: + * Ben Collins + * + * Additional work by: + * John Brooks + */ + +#include +#include + +#include "solo6x10.h" +#include "solo6x10-tw28.h" + +#define DEFAULT_HDELAY_NTSC (32 - 8) +#define DEFAULT_HACTIVE_NTSC (720 + 16) +#define DEFAULT_VDELAY_NTSC (7 - 2) +#define DEFAULT_VACTIVE_NTSC (240 + 4) + +#define DEFAULT_HDELAY_PAL (32 + 4) +#define DEFAULT_HACTIVE_PAL (864-DEFAULT_HDELAY_PAL) +#define DEFAULT_VDELAY_PAL (6) +#define DEFAULT_VACTIVE_PAL (312-DEFAULT_VDELAY_PAL) + + +static const u8 tbl_tw2864_ntsc_template[] = { + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x00 */ + 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x10 */ + 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x20 */ + 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x30 */ + 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x40 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA3, 0x00, + 0x00, 0x02, 0x00, 0xcc, 0x00, 0x80, 0x44, 0x50, /* 0x80 */ + 0x22, 0x01, 0xd8, 0xbc, 0xb8, 0x44, 0x38, 0x00, + 0x00, 0x78, 0x72, 0x3e, 0x14, 0xa5, 0xe4, 0x05, /* 0x90 */ + 0x00, 0x28, 0x44, 0x44, 0xa0, 0x88, 0x5a, 0x01, + 0x08, 0x08, 0x08, 0x08, 0x1a, 0x1a, 0x1a, 0x1a, /* 0xa0 */ + 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x44, + 0x44, 0x0a, 0x00, 0xff, 0xef, 0xef, 0xef, 0xef, /* 0xb0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */ + 0x00, 0x00, 0x55, 0x00, 0xb1, 0xe4, 0x40, 0x00, + 0x77, 0x77, 0x01, 0x13, 0x57, 0x9b, 0xdf, 0x20, /* 0xd0 */ + 0x64, 0xa8, 0xec, 0xc1, 0x0f, 0x11, 0x11, 0x81, + 0x00, 0xe0, 0xbb, 0xbb, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */ + 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00, + 0x83, 0xb5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, /* 0xf0 */ + 0x64, 0x11, 0x40, 0xaf, 0xff, 0x00, 0x00, 0x00, +}; + +static const u8 tbl_tw2864_pal_template[] = { + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x00 */ + 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x10 */ + 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x20 */ + 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x30 */ + 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x40 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA3, 0x00, + 0x00, 0x02, 0x00, 0xcc, 0x00, 0x80, 0x44, 0x50, /* 0x80 */ + 0x22, 0x01, 0xd8, 0xbc, 0xb8, 0x44, 0x38, 0x00, + 0x00, 0x78, 0x72, 0x3e, 0x14, 0xa5, 0xe4, 0x05, /* 0x90 */ + 0x00, 0x28, 0x44, 0x44, 0xa0, 0x90, 0x5a, 0x01, + 0x0a, 0x0a, 0x0a, 0x0a, 0x1a, 0x1a, 0x1a, 0x1a, /* 0xa0 */ + 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x44, + 0x44, 0x0a, 0x00, 0xff, 0xef, 0xef, 0xef, 0xef, /* 0xb0 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */ + 0x00, 0x00, 0x55, 0x00, 0xb1, 0xe4, 0x40, 0x00, + 0x77, 0x77, 0x01, 0x13, 0x57, 0x9b, 0xdf, 0x20, /* 0xd0 */ + 0x64, 0xa8, 0xec, 0xc1, 0x0f, 0x11, 0x11, 0x81, + 0x00, 0xe0, 0xbb, 0xbb, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */ + 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00, + 0x83, 0xb5, 0x09, 0x00, 0xa0, 0x00, 0x01, 0x20, /* 0xf0 */ + 0x64, 0x11, 0x40, 0xaf, 0xff, 0x00, 0x00, 0x00, +}; + +static const u8 tbl_tw2865_ntsc_template[] = { + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x00 */ + 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x10 */ + 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x20 */ + 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0xf0, 0x70, 0x48, 0x80, 0x80, 0x00, 0x02, /* 0x30 */ + 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f, + 0x00, 0x00, 0x90, 0x68, 0x00, 0x38, 0x80, 0x80, /* 0x40 */ + 0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43, + 0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, /* 0x70 */ + 0xE9, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80, + 0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, /* 0x80 */ + 0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00, + 0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, /* 0x90 */ + 0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13, + 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1B, 0x1A, /* 0xa0 */ + 0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44, + 0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, /* 0xb0 */ + 0xFF, 0xE7, 0xE9, 0xE9, 0xEB, 0xFF, 0xD6, 0xD8, + 0xD8, 0xD7, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */ + 0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80, + 0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, /* 0xd0 */ + 0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81, + 0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */ + 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00, + 0x83, 0xB5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, /* 0xf0 */ + 0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0, +}; + +static const u8 tbl_tw2865_pal_template[] = { + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x00 */ + 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x10 */ + 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x20 */ + 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x30 */ + 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f, + 0x00, 0x94, 0x90, 0x48, 0x00, 0x38, 0x7F, 0x80, /* 0x40 */ + 0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43, + 0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, /* 0x70 */ + 0xEA, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80, + 0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, /* 0x80 */ + 0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00, + 0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, /* 0x90 */ + 0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13, + 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1A, 0x1A, /* 0xa0 */ + 0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44, + 0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, /* 0xb0 */ + 0xFF, 0xE7, 0xE9, 0xE9, 0xE9, 0xFF, 0xD7, 0xD8, + 0xD9, 0xD8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */ + 0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80, + 0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, /* 0xd0 */ + 0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81, + 0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */ + 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00, + 0x83, 0xB5, 0x09, 0x00, 0xA0, 0x00, 0x01, 0x20, /* 0xf0 */ + 0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0, +}; + +#define is_tw286x(__solo, __id) (!(__solo->tw2815 & (1 << __id))) + +static u8 tw_readbyte(struct solo_dev *solo_dev, int chip_id, u8 tw6x_off, + u8 tw_off) +{ + if (is_tw286x(solo_dev, chip_id)) + return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_id), + tw6x_off); + else + return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_id), + tw_off); +} + +static void tw_writebyte(struct solo_dev *solo_dev, int chip_id, + u8 tw6x_off, u8 tw_off, u8 val) +{ + if (is_tw286x(solo_dev, chip_id)) + solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_id), + tw6x_off, val); + else + solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_id), + tw_off, val); +} + +static void tw_write_and_verify(struct solo_dev *solo_dev, u8 addr, u8 off, + u8 val) +{ + int i; + + for (i = 0; i < 5; i++) { + u8 rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, addr, off); + + if (rval == val) + return; + + solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, addr, off, val); + msleep_interruptible(1); + } + +/* printk("solo6x10/tw28: Error writing register: %02x->%02x [%02x]\n", */ +/* addr, off, val); */ +} + +static int tw2865_setup(struct solo_dev *solo_dev, u8 dev_addr) +{ + u8 tbl_tw2865_common[256]; + int i; + + if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL) + memcpy(tbl_tw2865_common, tbl_tw2865_pal_template, + sizeof(tbl_tw2865_common)); + else + memcpy(tbl_tw2865_common, tbl_tw2865_ntsc_template, + sizeof(tbl_tw2865_common)); + + /* ALINK Mode */ + if (solo_dev->nr_chans == 4) { + tbl_tw2865_common[0xd2] = 0x01; + tbl_tw2865_common[0xcf] = 0x00; + } else if (solo_dev->nr_chans == 8) { + tbl_tw2865_common[0xd2] = 0x02; + if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2865_common[0xcf] = 0x80; + } else if (solo_dev->nr_chans == 16) { + tbl_tw2865_common[0xd2] = 0x03; + if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2865_common[0xcf] = 0x83; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(2)) + tbl_tw2865_common[0xcf] = 0x83; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(3)) + tbl_tw2865_common[0xcf] = 0x80; + } + + for (i = 0; i < 0xff; i++) { + /* Skip read only registers */ + switch (i) { + case 0xb8 ... 0xc1: + case 0xc4 ... 0xc7: + case 0xfd: + continue; + } + switch (i & ~0x30) { + case 0x00: + case 0x0c ... 0x0d: + continue; + } + + tw_write_and_verify(solo_dev, dev_addr, i, + tbl_tw2865_common[i]); + } + + return 0; +} + +static int tw2864_setup(struct solo_dev *solo_dev, u8 dev_addr) +{ + u8 tbl_tw2864_common[256]; + int i; + + if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL) + memcpy(tbl_tw2864_common, tbl_tw2864_pal_template, + sizeof(tbl_tw2864_common)); + else + memcpy(tbl_tw2864_common, tbl_tw2864_ntsc_template, + sizeof(tbl_tw2864_common)); + + if (solo_dev->tw2865 == 0) { + /* IRQ Mode */ + if (solo_dev->nr_chans == 4) { + tbl_tw2864_common[0xd2] = 0x01; + tbl_tw2864_common[0xcf] = 0x00; + } else if (solo_dev->nr_chans == 8) { + tbl_tw2864_common[0xd2] = 0x02; + if (dev_addr == TW_CHIP_OFFSET_ADDR(0)) + tbl_tw2864_common[0xcf] = 0x43; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2864_common[0xcf] = 0x40; + } else if (solo_dev->nr_chans == 16) { + tbl_tw2864_common[0xd2] = 0x03; + if (dev_addr == TW_CHIP_OFFSET_ADDR(0)) + tbl_tw2864_common[0xcf] = 0x43; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2864_common[0xcf] = 0x43; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(2)) + tbl_tw2864_common[0xcf] = 0x43; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(3)) + tbl_tw2864_common[0xcf] = 0x40; + } + } else { + /* ALINK Mode. Assumes that the first tw28xx is a + * 2865 and these are in cascade. */ + for (i = 0; i <= 4; i++) + tbl_tw2864_common[0x08 | i << 4] = 0x12; + + if (solo_dev->nr_chans == 8) { + tbl_tw2864_common[0xd2] = 0x02; + if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2864_common[0xcf] = 0x80; + } else if (solo_dev->nr_chans == 16) { + tbl_tw2864_common[0xd2] = 0x03; + if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2864_common[0xcf] = 0x83; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(2)) + tbl_tw2864_common[0xcf] = 0x83; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(3)) + tbl_tw2864_common[0xcf] = 0x80; + } + } + + for (i = 0; i < 0xff; i++) { + /* Skip read only registers */ + switch (i) { + case 0xb8 ... 0xc1: + case 0xfd: + continue; + } + switch (i & ~0x30) { + case 0x00: + case 0x0c: + case 0x0d: + continue; + } + + tw_write_and_verify(solo_dev, dev_addr, i, + tbl_tw2864_common[i]); + } + + return 0; +} + +static int tw2815_setup(struct solo_dev *solo_dev, u8 dev_addr) +{ + u8 tbl_ntsc_tw2815_common[] = { + 0x00, 0xc8, 0x20, 0xd0, 0x06, 0xf0, 0x08, 0x80, + 0x80, 0x80, 0x80, 0x02, 0x06, 0x00, 0x11, + }; + + u8 tbl_pal_tw2815_common[] = { + 0x00, 0x88, 0x20, 0xd0, 0x05, 0x20, 0x28, 0x80, + 0x80, 0x80, 0x80, 0x82, 0x06, 0x00, 0x11, + }; + + u8 tbl_tw2815_sfr[] = { + 0x00, 0x00, 0x00, 0xc0, 0x45, 0xa0, 0xd0, 0x2f, /* 0x00 */ + 0x64, 0x80, 0x80, 0x82, 0x82, 0x00, 0x00, 0x00, + 0x00, 0x0f, 0x05, 0x00, 0x00, 0x80, 0x06, 0x00, /* 0x10 */ + 0x00, 0x00, 0x00, 0xff, 0x8f, 0x00, 0x00, 0x00, + 0x88, 0x88, 0xc0, 0x00, 0x20, 0x64, 0xa8, 0xec, /* 0x20 */ + 0x31, 0x75, 0xb9, 0xfd, 0x00, 0x00, 0x88, 0x88, + 0x88, 0x11, 0x00, 0x88, 0x88, 0x00, /* 0x30 */ + }; + u8 *tbl_tw2815_common; + int i; + int ch; + + tbl_ntsc_tw2815_common[0x06] = 0; + + /* Horizontal Delay Control */ + tbl_ntsc_tw2815_common[0x02] = DEFAULT_HDELAY_NTSC & 0xff; + tbl_ntsc_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_NTSC >> 8); + + /* Horizontal Active Control */ + tbl_ntsc_tw2815_common[0x03] = DEFAULT_HACTIVE_NTSC & 0xff; + tbl_ntsc_tw2815_common[0x06] |= + ((0x03 & (DEFAULT_HACTIVE_NTSC >> 8)) << 2); + + /* Vertical Delay Control */ + tbl_ntsc_tw2815_common[0x04] = DEFAULT_VDELAY_NTSC & 0xff; + tbl_ntsc_tw2815_common[0x06] |= + ((0x01 & (DEFAULT_VDELAY_NTSC >> 8)) << 4); + + /* Vertical Active Control */ + tbl_ntsc_tw2815_common[0x05] = DEFAULT_VACTIVE_NTSC & 0xff; + tbl_ntsc_tw2815_common[0x06] |= + ((0x01 & (DEFAULT_VACTIVE_NTSC >> 8)) << 5); + + tbl_pal_tw2815_common[0x06] = 0; + + /* Horizontal Delay Control */ + tbl_pal_tw2815_common[0x02] = DEFAULT_HDELAY_PAL & 0xff; + tbl_pal_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_PAL >> 8); + + /* Horizontal Active Control */ + tbl_pal_tw2815_common[0x03] = DEFAULT_HACTIVE_PAL & 0xff; + tbl_pal_tw2815_common[0x06] |= + ((0x03 & (DEFAULT_HACTIVE_PAL >> 8)) << 2); + + /* Vertical Delay Control */ + tbl_pal_tw2815_common[0x04] = DEFAULT_VDELAY_PAL & 0xff; + tbl_pal_tw2815_common[0x06] |= + ((0x01 & (DEFAULT_VDELAY_PAL >> 8)) << 4); + + /* Vertical Active Control */ + tbl_pal_tw2815_common[0x05] = DEFAULT_VACTIVE_PAL & 0xff; + tbl_pal_tw2815_common[0x06] |= + ((0x01 & (DEFAULT_VACTIVE_PAL >> 8)) << 5); + + tbl_tw2815_common = + (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) ? + tbl_ntsc_tw2815_common : tbl_pal_tw2815_common; + + /* Dual ITU-R BT.656 format */ + tbl_tw2815_common[0x0d] |= 0x04; + + /* Audio configuration */ + tbl_tw2815_sfr[0x62 - 0x40] &= ~(3 << 6); + + if (solo_dev->nr_chans == 4) { + tbl_tw2815_sfr[0x63 - 0x40] |= 1; + tbl_tw2815_sfr[0x62 - 0x40] |= 3 << 6; + } else if (solo_dev->nr_chans == 8) { + tbl_tw2815_sfr[0x63 - 0x40] |= 2; + if (dev_addr == TW_CHIP_OFFSET_ADDR(0)) + tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6; + } else if (solo_dev->nr_chans == 16) { + tbl_tw2815_sfr[0x63 - 0x40] |= 3; + if (dev_addr == TW_CHIP_OFFSET_ADDR(0)) + tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(1)) + tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(2)) + tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6; + else if (dev_addr == TW_CHIP_OFFSET_ADDR(3)) + tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6; + } + + /* Output mode of R_ADATM pin (0 mixing, 1 record) */ + /* tbl_tw2815_sfr[0x63 - 0x40] |= 0 << 2; */ + + /* 8KHz, used to be 16KHz, but changed for remote client compat */ + tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 2; + tbl_tw2815_sfr[0x6c - 0x40] |= 0 << 2; + + /* Playback of right channel */ + tbl_tw2815_sfr[0x6c - 0x40] |= 1 << 5; + + /* Reserved value (XXX ??) */ + tbl_tw2815_sfr[0x5c - 0x40] |= 1 << 5; + + /* Analog output gain and mix ratio playback on full */ + tbl_tw2815_sfr[0x70 - 0x40] |= 0xff; + /* Select playback audio and mute all except */ + tbl_tw2815_sfr[0x71 - 0x40] |= 0x10; + tbl_tw2815_sfr[0x6d - 0x40] |= 0x0f; + + /* End of audio configuration */ + + for (ch = 0; ch < 4; ch++) { + tbl_tw2815_common[0x0d] &= ~3; + switch (ch) { + case 0: + tbl_tw2815_common[0x0d] |= 0x21; + break; + case 1: + tbl_tw2815_common[0x0d] |= 0x20; + break; + case 2: + tbl_tw2815_common[0x0d] |= 0x23; + break; + case 3: + tbl_tw2815_common[0x0d] |= 0x22; + break; + } + + for (i = 0; i < 0x0f; i++) { + if (i == 0x00) + continue; /* read-only */ + solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, + dev_addr, (ch * 0x10) + i, + tbl_tw2815_common[i]); + } + } + + for (i = 0x40; i < 0x76; i++) { + /* Skip read-only and nop registers */ + if (i == 0x40 || i == 0x59 || i == 0x5a || + i == 0x5d || i == 0x5e || i == 0x5f) + continue; + + solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, dev_addr, i, + tbl_tw2815_sfr[i - 0x40]); + } + + return 0; +} + +#define FIRST_ACTIVE_LINE 0x0008 +#define LAST_ACTIVE_LINE 0x0102 + +static void saa712x_write_regs(struct solo_dev *dev, const u8 *vals, + int start, int n) +{ + for (; start < n; start++, vals++) { + /* Skip read-only registers */ + switch (start) { + /* case 0x00 ... 0x25: */ + case 0x2e ... 0x37: + case 0x60: + case 0x7d: + continue; + } + solo_i2c_writebyte(dev, SOLO_I2C_SAA, 0x46, start, *vals); + } +} + +#define SAA712x_reg7c (0x80 | ((LAST_ACTIVE_LINE & 0x100) >> 2) \ + | ((FIRST_ACTIVE_LINE & 0x100) >> 4)) + +static void saa712x_setup(struct solo_dev *dev) +{ + const int reg_start = 0x26; + static const u8 saa7128_regs_ntsc[] = { + /* :0x26 */ + 0x0d, 0x00, + /* :0x28 */ + 0x59, 0x1d, 0x75, 0x3f, 0x06, 0x3f, + /* :0x2e XXX: read-only */ + 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* :0x38 */ + 0x1a, 0x1a, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, + /* :0x40 */ + 0x00, 0x00, 0x00, 0x68, 0x10, 0x97, 0x4c, 0x18, + 0x9b, 0x93, 0x9f, 0xff, 0x7c, 0x34, 0x3f, 0x3f, + /* :0x50 */ + 0x3f, 0x83, 0x83, 0x80, 0x0d, 0x0f, 0xc3, 0x06, + 0x02, 0x80, 0x71, 0x77, 0xa7, 0x67, 0x66, 0x2e, + /* :0x60 */ + 0x7b, 0x11, 0x4f, 0x1f, 0x7c, 0xf0, 0x21, 0x77, + 0x41, 0x88, 0x41, 0x52, 0xed, 0x10, 0x10, 0x00, + /* :0x70 */ + 0x41, 0xc3, 0x00, 0x3e, 0xb8, 0x02, 0x00, 0x00, + 0x00, 0x00, FIRST_ACTIVE_LINE, LAST_ACTIVE_LINE & 0xff, + SAA712x_reg7c, 0x00, 0xff, 0xff, + }, saa7128_regs_pal[] = { + /* :0x26 */ + 0x0d, 0x00, + /* :0x28 */ + 0xe1, 0x1d, 0x75, 0x3f, 0x06, 0x3f, + /* :0x2e XXX: read-only */ + 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* :0x38 */ + 0x1a, 0x1a, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, + /* :0x40 */ + 0x00, 0x00, 0x00, 0x68, 0x10, 0x97, 0x4c, 0x18, + 0x9b, 0x93, 0x9f, 0xff, 0x7c, 0x34, 0x3f, 0x3f, + /* :0x50 */ + 0x3f, 0x83, 0x83, 0x80, 0x0d, 0x0f, 0xc3, 0x06, + 0x02, 0x80, 0x0f, 0x77, 0xa7, 0x67, 0x66, 0x2e, + /* :0x60 */ + 0x7b, 0x02, 0x35, 0xcb, 0x8a, 0x09, 0x2a, 0x77, + 0x41, 0x88, 0x41, 0x52, 0xf1, 0x10, 0x20, 0x00, + /* :0x70 */ + 0x41, 0xc3, 0x00, 0x3e, 0xb8, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x12, 0x30, + SAA712x_reg7c | 0x40, 0x00, 0xff, 0xff, + }; + + if (dev->video_type == SOLO_VO_FMT_TYPE_PAL) + saa712x_write_regs(dev, saa7128_regs_pal, reg_start, + sizeof(saa7128_regs_pal)); + else + saa712x_write_regs(dev, saa7128_regs_ntsc, reg_start, + sizeof(saa7128_regs_ntsc)); +} + +int solo_tw28_init(struct solo_dev *solo_dev) +{ + int i; + u8 value; + + solo_dev->tw28_cnt = 0; + + /* Detect techwell chip type(s) */ + for (i = 0; i < solo_dev->nr_chans / 4; i++) { + value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(i), 0xFF); + + switch (value >> 3) { + case 0x18: + solo_dev->tw2865 |= 1 << i; + solo_dev->tw28_cnt++; + break; + case 0x0c: + case 0x0d: + solo_dev->tw2864 |= 1 << i; + solo_dev->tw28_cnt++; + break; + default: + value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(i), + 0x59); + if ((value >> 3) == 0x04) { + solo_dev->tw2815 |= 1 << i; + solo_dev->tw28_cnt++; + } + } + } + + if (solo_dev->tw28_cnt != (solo_dev->nr_chans >> 2)) { + dev_err(&solo_dev->pdev->dev, + "Could not initialize any techwell chips\n"); + return -EINVAL; + } + + saa712x_setup(solo_dev); + + for (i = 0; i < solo_dev->tw28_cnt; i++) { + if ((solo_dev->tw2865 & (1 << i))) + tw2865_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i)); + else if ((solo_dev->tw2864 & (1 << i))) + tw2864_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i)); + else + tw2815_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i)); + } + + return 0; +} + +/* + * We accessed the video status signal in the Techwell chip through + * iic/i2c because the video status reported by register REG_VI_STATUS1 + * (address 0x012C) of the SOLO6010 chip doesn't give the correct video + * status signal values. + */ +int tw28_get_video_status(struct solo_dev *solo_dev, u8 ch) +{ + u8 val, chip_num; + + /* Get the right chip and on-chip channel */ + chip_num = ch / 4; + ch %= 4; + + val = tw_readbyte(solo_dev, chip_num, TW286x_AV_STAT_ADDR, + TW_AV_STAT_ADDR) & 0x0f; + + return val & (1 << ch) ? 1 : 0; +} + +#if 0 +/* Status of audio from up to 4 techwell chips are combined into 1 variable. + * See techwell datasheet for details. */ +u16 tw28_get_audio_status(struct solo_dev *solo_dev) +{ + u8 val; + u16 status = 0; + int i; + + for (i = 0; i < solo_dev->tw28_cnt; i++) { + val = (tw_readbyte(solo_dev, i, TW286x_AV_STAT_ADDR, + TW_AV_STAT_ADDR) & 0xf0) >> 4; + status |= val << (i * 4); + } + + return status; +} +#endif + +bool tw28_has_sharpness(struct solo_dev *solo_dev, u8 ch) +{ + return is_tw286x(solo_dev, ch / 4); +} + +int tw28_set_ctrl_val(struct solo_dev *solo_dev, u32 ctrl, u8 ch, + s32 val) +{ + char sval; + u8 chip_num; + + /* Get the right chip and on-chip channel */ + chip_num = ch / 4; + ch %= 4; + + if (val > 255 || val < 0) + return -ERANGE; + + switch (ctrl) { + case V4L2_CID_SHARPNESS: + /* Only 286x has sharpness */ + if (is_tw286x(solo_dev, chip_num)) { + u8 v = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_num), + TW286x_SHARPNESS(chip_num)); + v &= 0xf0; + v |= val; + solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_num), + TW286x_SHARPNESS(chip_num), v); + } else { + return -EINVAL; + } + break; + + case V4L2_CID_HUE: + if (is_tw286x(solo_dev, chip_num)) + sval = val - 128; + else + sval = (char)val; + tw_writebyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch), + TW_HUE_ADDR(ch), sval); + + break; + + case V4L2_CID_SATURATION: + /* 286x chips have a U and V component for saturation */ + if (is_tw286x(solo_dev, chip_num)) { + solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_num), + TW286x_SATURATIONU_ADDR(ch), val); + } + tw_writebyte(solo_dev, chip_num, TW286x_SATURATIONV_ADDR(ch), + TW_SATURATION_ADDR(ch), val); + + break; + + case V4L2_CID_CONTRAST: + tw_writebyte(solo_dev, chip_num, TW286x_CONTRAST_ADDR(ch), + TW_CONTRAST_ADDR(ch), val); + break; + + case V4L2_CID_BRIGHTNESS: + if (is_tw286x(solo_dev, chip_num)) + sval = val - 128; + else + sval = (char)val; + tw_writebyte(solo_dev, chip_num, TW286x_BRIGHTNESS_ADDR(ch), + TW_BRIGHTNESS_ADDR(ch), sval); + + break; + default: + return -EINVAL; + } + + return 0; +} + +int tw28_get_ctrl_val(struct solo_dev *solo_dev, u32 ctrl, u8 ch, + s32 *val) +{ + u8 rval, chip_num; + + /* Get the right chip and on-chip channel */ + chip_num = ch / 4; + ch %= 4; + + switch (ctrl) { + case V4L2_CID_SHARPNESS: + /* Only 286x has sharpness */ + if (is_tw286x(solo_dev, chip_num)) { + rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, + TW_CHIP_OFFSET_ADDR(chip_num), + TW286x_SHARPNESS(chip_num)); + *val = rval & 0x0f; + } else + *val = 0; + break; + case V4L2_CID_HUE: + rval = tw_readbyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch), + TW_HUE_ADDR(ch)); + if (is_tw286x(solo_dev, chip_num)) + *val = (s32)((char)rval) + 128; + else + *val = rval; + break; + case V4L2_CID_SATURATION: + *val = tw_readbyte(solo_dev, chip_num, + TW286x_SATURATIONU_ADDR(ch), + TW_SATURATION_ADDR(ch)); + break; + case V4L2_CID_CONTRAST: + *val = tw_readbyte(solo_dev, chip_num, + TW286x_CONTRAST_ADDR(ch), + TW_CONTRAST_ADDR(ch)); + break; + case V4L2_CID_BRIGHTNESS: + rval = tw_readbyte(solo_dev, chip_num, + TW286x_BRIGHTNESS_ADDR(ch), + TW_BRIGHTNESS_ADDR(ch)); + if (is_tw286x(solo_dev, chip_num)) + *val = (s32)((char)rval) + 128; + else + *val = rval; + break; + default: + return -EINVAL; + } + + return 0; +} + +#if 0 +/* + * For audio output volume, the output channel is only 1. In this case we + * don't need to offset TW_CHIP_OFFSET_ADDR. The TW_CHIP_OFFSET_ADDR used + * is the base address of the techwell chip. + */ +void tw2815_Set_AudioOutVol(struct solo_dev *solo_dev, unsigned int u_val) +{ + unsigned int val; + unsigned int chip_num; + + chip_num = (solo_dev->nr_chans - 1) / 4; + + val = tw_readbyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR, + TW_AUDIO_OUTPUT_VOL_ADDR); + + u_val = (val & 0x0f) | (u_val << 4); + + tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR, + TW_AUDIO_OUTPUT_VOL_ADDR, u_val); +} +#endif + +u8 tw28_get_audio_gain(struct solo_dev *solo_dev, u8 ch) +{ + u8 val; + u8 chip_num; + + /* Get the right chip and on-chip channel */ + chip_num = ch / 4; + ch %= 4; + + val = tw_readbyte(solo_dev, chip_num, + TW286x_AUDIO_INPUT_GAIN_ADDR(ch), + TW_AUDIO_INPUT_GAIN_ADDR(ch)); + + return (ch % 2) ? (val >> 4) : (val & 0x0f); +} + +void tw28_set_audio_gain(struct solo_dev *solo_dev, u8 ch, u8 val) +{ + u8 old_val; + u8 chip_num; + + /* Get the right chip and on-chip channel */ + chip_num = ch / 4; + ch %= 4; + + old_val = tw_readbyte(solo_dev, chip_num, + TW286x_AUDIO_INPUT_GAIN_ADDR(ch), + TW_AUDIO_INPUT_GAIN_ADDR(ch)); + + val = (old_val & ((ch % 2) ? 0x0f : 0xf0)) | + ((ch % 2) ? (val << 4) : val); + + tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_INPUT_GAIN_ADDR(ch), + TW_AUDIO_INPUT_GAIN_ADDR(ch), val); +} -- cgit v1.2.3