From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/pci/tw686x/tw686x-regs.h | 132 +++++++++++++++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 drivers/media/pci/tw686x/tw686x-regs.h (limited to 'drivers/media/pci/tw686x/tw686x-regs.h') diff --git a/drivers/media/pci/tw686x/tw686x-regs.h b/drivers/media/pci/tw686x/tw686x-regs.h new file mode 100644 index 000000000..8adacc928 --- /dev/null +++ b/drivers/media/pci/tw686x/tw686x-regs.h @@ -0,0 +1,132 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* DMA controller registers */ +#define REG8_1(a0) ((const u16[8]) { a0, a0 + 1, a0 + 2, a0 + 3, \ + a0 + 4, a0 + 5, a0 + 6, a0 + 7}) +#define REG8_2(a0) ((const u16[8]) { a0, a0 + 2, a0 + 4, a0 + 6, \ + a0 + 8, a0 + 0xa, a0 + 0xc, a0 + 0xe}) +#define REG8_8(a0) ((const u16[8]) { a0, a0 + 8, a0 + 0x10, a0 + 0x18, \ + a0 + 0x20, a0 + 0x28, a0 + 0x30, \ + a0 + 0x38}) +#define INT_STATUS 0x00 +#define PB_STATUS 0x01 +#define DMA_CMD 0x02 +#define VIDEO_FIFO_STATUS 0x03 +#define VIDEO_CHANNEL_ID 0x04 +#define VIDEO_PARSER_STATUS 0x05 +#define SYS_SOFT_RST 0x06 +#define DMA_PAGE_TABLE0_ADDR ((const u16[8]) { 0x08, 0xd0, 0xd2, 0xd4, \ + 0xd6, 0xd8, 0xda, 0xdc }) +#define DMA_PAGE_TABLE1_ADDR ((const u16[8]) { 0x09, 0xd1, 0xd3, 0xd5, \ + 0xd7, 0xd9, 0xdb, 0xdd }) +#define DMA_CHANNEL_ENABLE 0x0a +#define DMA_CONFIG 0x0b +#define DMA_TIMER_INTERVAL 0x0c +#define DMA_CHANNEL_TIMEOUT 0x0d +#define VDMA_CHANNEL_CONFIG REG8_1(0x10) +#define ADMA_P_ADDR REG8_2(0x18) +#define ADMA_B_ADDR REG8_2(0x19) +#define DMA10_P_ADDR 0x28 +#define DMA10_B_ADDR 0x29 +#define VIDEO_CONTROL1 0x2a +#define VIDEO_CONTROL2 0x2b +#define AUDIO_CONTROL1 0x2c +#define AUDIO_CONTROL2 0x2d +#define PHASE_REF 0x2e +#define GPIO_REG 0x2f +#define INTL_HBAR_CTRL REG8_1(0x30) +#define AUDIO_CONTROL3 0x38 +#define VIDEO_FIELD_CTRL REG8_1(0x39) +#define HSCALER_CTRL REG8_1(0x42) +#define VIDEO_SIZE REG8_1(0x4A) +#define VIDEO_SIZE_F2 REG8_1(0x52) +#define MD_CONF REG8_1(0x60) +#define MD_INIT REG8_1(0x68) +#define MD_MAP0 REG8_1(0x70) +#define VDMA_P_ADDR REG8_8(0x80) /* not used in DMA SG mode */ +#define VDMA_WHP REG8_8(0x81) +#define VDMA_B_ADDR REG8_8(0x82) +#define VDMA_F2_P_ADDR REG8_8(0x84) +#define VDMA_F2_WHP REG8_8(0x85) +#define VDMA_F2_B_ADDR REG8_8(0x86) +#define EP_REG_ADDR 0xfe +#define EP_REG_DATA 0xff + +/* Video decoder registers */ +#define VDREG8(a0) ((const u16[8]) { \ + a0 + 0x000, a0 + 0x010, a0 + 0x020, a0 + 0x030, \ + a0 + 0x100, a0 + 0x110, a0 + 0x120, a0 + 0x130}) +#define VIDSTAT VDREG8(0x100) +#define BRIGHT VDREG8(0x101) +#define CONTRAST VDREG8(0x102) +#define SHARPNESS VDREG8(0x103) +#define SAT_U VDREG8(0x104) +#define SAT_V VDREG8(0x105) +#define HUE VDREG8(0x106) +#define CROP_HI VDREG8(0x107) +#define VDELAY_LO VDREG8(0x108) +#define VACTIVE_LO VDREG8(0x109) +#define HDELAY_LO VDREG8(0x10a) +#define HACTIVE_LO VDREG8(0x10b) +#define MVSN VDREG8(0x10c) +#define STATUS2 VDREG8(0x10d) +#define SDT VDREG8(0x10e) +#define SDT_EN VDREG8(0x10f) + +#define VSCALE_LO VDREG8(0x144) +#define SCALE_HI VDREG8(0x145) +#define HSCALE_LO VDREG8(0x146) +#define F2CROP_HI VDREG8(0x147) +#define F2VDELAY_LO VDREG8(0x148) +#define F2VACTIVE_LO VDREG8(0x149) +#define F2HDELAY_LO VDREG8(0x14a) +#define F2HACTIVE_LO VDREG8(0x14b) +#define F2VSCALE_LO VDREG8(0x14c) +#define F2SCALE_HI VDREG8(0x14d) +#define F2HSCALE_LO VDREG8(0x14e) +#define F2CNT VDREG8(0x14f) + +#define VDREG2(a0) ((const u16[2]) { a0, a0 + 0x100 }) +#define SRST VDREG2(0x180) +#define ACNTL VDREG2(0x181) +#define ACNTL2 VDREG2(0x182) +#define CNTRL1 VDREG2(0x183) +#define CKHY VDREG2(0x184) +#define SHCOR VDREG2(0x185) +#define CORING VDREG2(0x186) +#define CLMPG VDREG2(0x187) +#define IAGC VDREG2(0x188) +#define VCTRL1 VDREG2(0x18f) +#define MISC1 VDREG2(0x194) +#define LOOP VDREG2(0x195) +#define MISC2 VDREG2(0x196) + +#define CLMD VDREG2(0x197) +#define ANPWRDOWN VDREG2(0x1ce) +#define AIGAIN ((const u16[8]) { 0x1d0, 0x1d1, 0x1d2, 0x1d3, \ + 0x2d0, 0x2d1, 0x2d2, 0x2d3 }) + +#define SYS_MODE_DMA_SHIFT 13 +#define AUDIO_DMA_SIZE_SHIFT 19 +#define AUDIO_DMA_SIZE_MIN SZ_512 +#define AUDIO_DMA_SIZE_MAX SZ_4K +#define AUDIO_DMA_SIZE_MASK (SZ_8K - 1) + +#define DMA_CMD_ENABLE BIT(31) +#define INT_STATUS_DMA_TOUT BIT(17) +#define TW686X_VIDSTAT_HLOCK BIT(6) +#define TW686X_VIDSTAT_VDLOSS BIT(7) + +#define TW686X_STD_NTSC_M 0 +#define TW686X_STD_PAL 1 +#define TW686X_STD_SECAM 2 +#define TW686X_STD_NTSC_443 3 +#define TW686X_STD_PAL_M 4 +#define TW686X_STD_PAL_CN 5 +#define TW686X_STD_PAL_60 6 + +#define TW686X_FIELD_MODE 0x3 +#define TW686X_FRAME_MODE 0x2 +/* 0x1 is reserved */ +#define TW686X_SG_MODE 0x0 + +#define TW686X_FIFO_ERROR(x) (x & ~(0xff)) -- cgit v1.2.3