From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/platform/cadence/Kconfig | 27 ++ drivers/media/platform/cadence/Makefile | 4 + drivers/media/platform/cadence/cdns-csi2rx.c | 504 ++++++++++++++++++++ drivers/media/platform/cadence/cdns-csi2tx.c | 660 +++++++++++++++++++++++++++ 4 files changed, 1195 insertions(+) create mode 100644 drivers/media/platform/cadence/Kconfig create mode 100644 drivers/media/platform/cadence/Makefile create mode 100644 drivers/media/platform/cadence/cdns-csi2rx.c create mode 100644 drivers/media/platform/cadence/cdns-csi2tx.c (limited to 'drivers/media/platform/cadence') diff --git a/drivers/media/platform/cadence/Kconfig b/drivers/media/platform/cadence/Kconfig new file mode 100644 index 000000000..480325d05 --- /dev/null +++ b/drivers/media/platform/cadence/Kconfig @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: GPL-2.0-only + +comment "Cadence media platform drivers" + +config VIDEO_CADENCE_CSI2RX + tristate "Cadence MIPI-CSI2 RX Controller" + depends on VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + Support for the Cadence MIPI CSI2 Receiver controller. + + To compile this driver as a module, choose M here: the module will be + called cdns-csi2rx. + +config VIDEO_CADENCE_CSI2TX + tristate "Cadence MIPI-CSI2 TX Controller" + depends on VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + Support for the Cadence MIPI CSI2 Transceiver controller. + + To compile this driver as a module, choose M here: the module will be + called cdns-csi2tx. diff --git a/drivers/media/platform/cadence/Makefile b/drivers/media/platform/cadence/Makefile new file mode 100644 index 000000000..be59a8728 --- /dev/null +++ b/drivers/media/platform/cadence/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_VIDEO_CADENCE_CSI2RX) += cdns-csi2rx.o +obj-$(CONFIG_VIDEO_CADENCE_CSI2TX) += cdns-csi2tx.o diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c new file mode 100644 index 000000000..cc3ebb0d9 --- /dev/null +++ b/drivers/media/platform/cadence/cdns-csi2rx.c @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Cadence MIPI-CSI2 RX Controller v1.3 + * + * Copyright (C) 2017 Cadence Design Systems Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define CSI2RX_DEVICE_CFG_REG 0x000 + +#define CSI2RX_SOFT_RESET_REG 0x004 +#define CSI2RX_SOFT_RESET_PROTOCOL BIT(1) +#define CSI2RX_SOFT_RESET_FRONT BIT(0) + +#define CSI2RX_STATIC_CFG_REG 0x008 +#define CSI2RX_STATIC_CFG_DLANE_MAP(llane, plane) ((plane) << (16 + (llane) * 4)) +#define CSI2RX_STATIC_CFG_LANES_MASK GENMASK(11, 8) + +#define CSI2RX_STREAM_BASE(n) (((n) + 1) * 0x100) + +#define CSI2RX_STREAM_CTRL_REG(n) (CSI2RX_STREAM_BASE(n) + 0x000) +#define CSI2RX_STREAM_CTRL_START BIT(0) + +#define CSI2RX_STREAM_DATA_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x008) +#define CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT BIT(31) +#define CSI2RX_STREAM_DATA_CFG_VC_SELECT(n) BIT((n) + 16) + +#define CSI2RX_STREAM_CFG_REG(n) (CSI2RX_STREAM_BASE(n) + 0x00c) +#define CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF (1 << 8) + +#define CSI2RX_LANES_MAX 4 +#define CSI2RX_STREAMS_MAX 4 + +enum csi2rx_pads { + CSI2RX_PAD_SINK, + CSI2RX_PAD_SOURCE_STREAM0, + CSI2RX_PAD_SOURCE_STREAM1, + CSI2RX_PAD_SOURCE_STREAM2, + CSI2RX_PAD_SOURCE_STREAM3, + CSI2RX_PAD_MAX, +}; + +struct csi2rx_priv { + struct device *dev; + unsigned int count; + + /* + * Used to prevent race conditions between multiple, + * concurrent calls to start and stop. + */ + struct mutex lock; + + void __iomem *base; + struct clk *sys_clk; + struct clk *p_clk; + struct clk *pixel_clk[CSI2RX_STREAMS_MAX]; + struct phy *dphy; + + u8 lanes[CSI2RX_LANES_MAX]; + u8 num_lanes; + u8 max_lanes; + u8 max_streams; + bool has_internal_dphy; + + struct v4l2_subdev subdev; + struct v4l2_async_notifier notifier; + struct media_pad pads[CSI2RX_PAD_MAX]; + + /* Remote source */ + struct v4l2_subdev *source_subdev; + int source_pad; +}; + +static inline +struct csi2rx_priv *v4l2_subdev_to_csi2rx(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct csi2rx_priv, subdev); +} + +static void csi2rx_reset(struct csi2rx_priv *csi2rx) +{ + writel(CSI2RX_SOFT_RESET_PROTOCOL | CSI2RX_SOFT_RESET_FRONT, + csi2rx->base + CSI2RX_SOFT_RESET_REG); + + udelay(10); + + writel(0, csi2rx->base + CSI2RX_SOFT_RESET_REG); +} + +static int csi2rx_start(struct csi2rx_priv *csi2rx) +{ + unsigned int i; + unsigned long lanes_used = 0; + u32 reg; + int ret; + + ret = clk_prepare_enable(csi2rx->p_clk); + if (ret) + return ret; + + csi2rx_reset(csi2rx); + + reg = csi2rx->num_lanes << 8; + for (i = 0; i < csi2rx->num_lanes; i++) { + reg |= CSI2RX_STATIC_CFG_DLANE_MAP(i, csi2rx->lanes[i]); + set_bit(csi2rx->lanes[i], &lanes_used); + } + + /* + * Even the unused lanes need to be mapped. In order to avoid + * to map twice to the same physical lane, keep the lanes used + * in the previous loop, and only map unused physical lanes to + * the rest of our logical lanes. + */ + for (i = csi2rx->num_lanes; i < csi2rx->max_lanes; i++) { + unsigned int idx = find_first_zero_bit(&lanes_used, + csi2rx->max_lanes); + set_bit(idx, &lanes_used); + reg |= CSI2RX_STATIC_CFG_DLANE_MAP(i, i + 1); + } + + writel(reg, csi2rx->base + CSI2RX_STATIC_CFG_REG); + + ret = v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, true); + if (ret) + goto err_disable_pclk; + + /* + * Create a static mapping between the CSI virtual channels + * and the output stream. + * + * This should be enhanced, but v4l2 lacks the support for + * changing that mapping dynamically. + * + * We also cannot enable and disable independent streams here, + * hence the reference counting. + */ + for (i = 0; i < csi2rx->max_streams; i++) { + ret = clk_prepare_enable(csi2rx->pixel_clk[i]); + if (ret) + goto err_disable_pixclk; + + writel(CSI2RX_STREAM_CFG_FIFO_MODE_LARGE_BUF, + csi2rx->base + CSI2RX_STREAM_CFG_REG(i)); + + writel(CSI2RX_STREAM_DATA_CFG_EN_VC_SELECT | + CSI2RX_STREAM_DATA_CFG_VC_SELECT(i), + csi2rx->base + CSI2RX_STREAM_DATA_CFG_REG(i)); + + writel(CSI2RX_STREAM_CTRL_START, + csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + } + + ret = clk_prepare_enable(csi2rx->sys_clk); + if (ret) + goto err_disable_pixclk; + + clk_disable_unprepare(csi2rx->p_clk); + + return 0; + +err_disable_pixclk: + for (; i > 0; i--) + clk_disable_unprepare(csi2rx->pixel_clk[i - 1]); + +err_disable_pclk: + clk_disable_unprepare(csi2rx->p_clk); + + return ret; +} + +static void csi2rx_stop(struct csi2rx_priv *csi2rx) +{ + unsigned int i; + + clk_prepare_enable(csi2rx->p_clk); + clk_disable_unprepare(csi2rx->sys_clk); + + for (i = 0; i < csi2rx->max_streams; i++) { + writel(0, csi2rx->base + CSI2RX_STREAM_CTRL_REG(i)); + + clk_disable_unprepare(csi2rx->pixel_clk[i]); + } + + clk_disable_unprepare(csi2rx->p_clk); + + if (v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, false)) + dev_warn(csi2rx->dev, "Couldn't disable our subdev\n"); +} + +static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev); + int ret = 0; + + mutex_lock(&csi2rx->lock); + + if (enable) { + /* + * If we're not the first users, there's no need to + * enable the whole controller. + */ + if (!csi2rx->count) { + ret = csi2rx_start(csi2rx); + if (ret) + goto out; + } + + csi2rx->count++; + } else { + csi2rx->count--; + + /* + * Let the last user turn off the lights. + */ + if (!csi2rx->count) + csi2rx_stop(csi2rx); + } + +out: + mutex_unlock(&csi2rx->lock); + return ret; +} + +static const struct v4l2_subdev_video_ops csi2rx_video_ops = { + .s_stream = csi2rx_s_stream, +}; + +static const struct v4l2_subdev_ops csi2rx_subdev_ops = { + .video = &csi2rx_video_ops, +}; + +static int csi2rx_async_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *s_subdev, + struct v4l2_async_subdev *asd) +{ + struct v4l2_subdev *subdev = notifier->sd; + struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev); + + csi2rx->source_pad = media_entity_get_fwnode_pad(&s_subdev->entity, + s_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (csi2rx->source_pad < 0) { + dev_err(csi2rx->dev, "Couldn't find output pad for subdev %s\n", + s_subdev->name); + return csi2rx->source_pad; + } + + csi2rx->source_subdev = s_subdev; + + dev_dbg(csi2rx->dev, "Bound %s pad: %d\n", s_subdev->name, + csi2rx->source_pad); + + return media_create_pad_link(&csi2rx->source_subdev->entity, + csi2rx->source_pad, + &csi2rx->subdev.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); +} + +static const struct v4l2_async_notifier_operations csi2rx_notifier_ops = { + .bound = csi2rx_async_bound, +}; + +static int csi2rx_get_resources(struct csi2rx_priv *csi2rx, + struct platform_device *pdev) +{ + unsigned char i; + u32 dev_cfg; + int ret; + + csi2rx->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(csi2rx->base)) + return PTR_ERR(csi2rx->base); + + csi2rx->sys_clk = devm_clk_get(&pdev->dev, "sys_clk"); + if (IS_ERR(csi2rx->sys_clk)) { + dev_err(&pdev->dev, "Couldn't get sys clock\n"); + return PTR_ERR(csi2rx->sys_clk); + } + + csi2rx->p_clk = devm_clk_get(&pdev->dev, "p_clk"); + if (IS_ERR(csi2rx->p_clk)) { + dev_err(&pdev->dev, "Couldn't get P clock\n"); + return PTR_ERR(csi2rx->p_clk); + } + + csi2rx->dphy = devm_phy_optional_get(&pdev->dev, "dphy"); + if (IS_ERR(csi2rx->dphy)) { + dev_err(&pdev->dev, "Couldn't get external D-PHY\n"); + return PTR_ERR(csi2rx->dphy); + } + + /* + * FIXME: Once we'll have external D-PHY support, the check + * will need to be removed. + */ + if (csi2rx->dphy) { + dev_err(&pdev->dev, "External D-PHY not supported yet\n"); + return -EINVAL; + } + + ret = clk_prepare_enable(csi2rx->p_clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't prepare and enable P clock\n"); + return ret; + } + + dev_cfg = readl(csi2rx->base + CSI2RX_DEVICE_CFG_REG); + clk_disable_unprepare(csi2rx->p_clk); + + csi2rx->max_lanes = dev_cfg & 7; + if (csi2rx->max_lanes > CSI2RX_LANES_MAX) { + dev_err(&pdev->dev, "Invalid number of lanes: %u\n", + csi2rx->max_lanes); + return -EINVAL; + } + + csi2rx->max_streams = (dev_cfg >> 4) & 7; + if (csi2rx->max_streams > CSI2RX_STREAMS_MAX) { + dev_err(&pdev->dev, "Invalid number of streams: %u\n", + csi2rx->max_streams); + return -EINVAL; + } + + csi2rx->has_internal_dphy = dev_cfg & BIT(3) ? true : false; + + /* + * FIXME: Once we'll have internal D-PHY support, the check + * will need to be removed. + */ + if (csi2rx->has_internal_dphy) { + dev_err(&pdev->dev, "Internal D-PHY not supported yet\n"); + return -EINVAL; + } + + for (i = 0; i < csi2rx->max_streams; i++) { + char clk_name[16]; + + snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i); + csi2rx->pixel_clk[i] = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(csi2rx->pixel_clk[i])) { + dev_err(&pdev->dev, "Couldn't get clock %s\n", clk_name); + return PTR_ERR(csi2rx->pixel_clk[i]); + } + } + + return 0; +} + +static int csi2rx_parse_dt(struct csi2rx_priv *csi2rx) +{ + struct v4l2_fwnode_endpoint v4l2_ep = { .bus_type = 0 }; + struct v4l2_async_subdev *asd; + struct fwnode_handle *fwh; + struct device_node *ep; + int ret; + + ep = of_graph_get_endpoint_by_regs(csi2rx->dev->of_node, 0, 0); + if (!ep) + return -EINVAL; + + fwh = of_fwnode_handle(ep); + ret = v4l2_fwnode_endpoint_parse(fwh, &v4l2_ep); + if (ret) { + dev_err(csi2rx->dev, "Could not parse v4l2 endpoint\n"); + of_node_put(ep); + return ret; + } + + if (v4l2_ep.bus_type != V4L2_MBUS_CSI2_DPHY) { + dev_err(csi2rx->dev, "Unsupported media bus type: 0x%x\n", + v4l2_ep.bus_type); + of_node_put(ep); + return -EINVAL; + } + + memcpy(csi2rx->lanes, v4l2_ep.bus.mipi_csi2.data_lanes, + sizeof(csi2rx->lanes)); + csi2rx->num_lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes; + if (csi2rx->num_lanes > csi2rx->max_lanes) { + dev_err(csi2rx->dev, "Unsupported number of data-lanes: %d\n", + csi2rx->num_lanes); + of_node_put(ep); + return -EINVAL; + } + + v4l2_async_nf_init(&csi2rx->notifier); + + asd = v4l2_async_nf_add_fwnode_remote(&csi2rx->notifier, fwh, + struct v4l2_async_subdev); + of_node_put(ep); + if (IS_ERR(asd)) + return PTR_ERR(asd); + + csi2rx->notifier.ops = &csi2rx_notifier_ops; + + ret = v4l2_async_subdev_nf_register(&csi2rx->subdev, &csi2rx->notifier); + if (ret) + v4l2_async_nf_cleanup(&csi2rx->notifier); + + return ret; +} + +static int csi2rx_probe(struct platform_device *pdev) +{ + struct csi2rx_priv *csi2rx; + unsigned int i; + int ret; + + csi2rx = kzalloc(sizeof(*csi2rx), GFP_KERNEL); + if (!csi2rx) + return -ENOMEM; + platform_set_drvdata(pdev, csi2rx); + csi2rx->dev = &pdev->dev; + mutex_init(&csi2rx->lock); + + ret = csi2rx_get_resources(csi2rx, pdev); + if (ret) + goto err_free_priv; + + ret = csi2rx_parse_dt(csi2rx); + if (ret) + goto err_free_priv; + + csi2rx->subdev.owner = THIS_MODULE; + csi2rx->subdev.dev = &pdev->dev; + v4l2_subdev_init(&csi2rx->subdev, &csi2rx_subdev_ops); + v4l2_set_subdevdata(&csi2rx->subdev, &pdev->dev); + snprintf(csi2rx->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.%s", + KBUILD_MODNAME, dev_name(&pdev->dev)); + + /* Create our media pads */ + csi2rx->subdev.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + csi2rx->pads[CSI2RX_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + for (i = CSI2RX_PAD_SOURCE_STREAM0; i < CSI2RX_PAD_MAX; i++) + csi2rx->pads[i].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&csi2rx->subdev.entity, CSI2RX_PAD_MAX, + csi2rx->pads); + if (ret) + goto err_cleanup; + + ret = v4l2_async_register_subdev(&csi2rx->subdev); + if (ret < 0) + goto err_cleanup; + + dev_info(&pdev->dev, + "Probed CSI2RX with %u/%u lanes, %u streams, %s D-PHY\n", + csi2rx->num_lanes, csi2rx->max_lanes, csi2rx->max_streams, + csi2rx->has_internal_dphy ? "internal" : "no"); + + return 0; + +err_cleanup: + v4l2_async_nf_cleanup(&csi2rx->notifier); +err_free_priv: + kfree(csi2rx); + return ret; +} + +static int csi2rx_remove(struct platform_device *pdev) +{ + struct csi2rx_priv *csi2rx = platform_get_drvdata(pdev); + + v4l2_async_unregister_subdev(&csi2rx->subdev); + kfree(csi2rx); + + return 0; +} + +static const struct of_device_id csi2rx_of_table[] = { + { .compatible = "cdns,csi2rx" }, + { }, +}; +MODULE_DEVICE_TABLE(of, csi2rx_of_table); + +static struct platform_driver csi2rx_driver = { + .probe = csi2rx_probe, + .remove = csi2rx_remove, + + .driver = { + .name = "cdns-csi2rx", + .of_match_table = csi2rx_of_table, + }, +}; +module_platform_driver(csi2rx_driver); +MODULE_AUTHOR("Maxime Ripard "); +MODULE_DESCRIPTION("Cadence CSI2-RX controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/cadence/cdns-csi2tx.c b/drivers/media/platform/cadence/cdns-csi2tx.c new file mode 100644 index 000000000..58e405b69 --- /dev/null +++ b/drivers/media/platform/cadence/cdns-csi2tx.c @@ -0,0 +1,660 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Cadence MIPI-CSI2 TX Controller + * + * Copyright (C) 2017-2019 Cadence Design Systems Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define CSI2TX_DEVICE_CONFIG_REG 0x00 +#define CSI2TX_DEVICE_CONFIG_STREAMS_MASK GENMASK(6, 4) +#define CSI2TX_DEVICE_CONFIG_HAS_DPHY BIT(3) +#define CSI2TX_DEVICE_CONFIG_LANES_MASK GENMASK(2, 0) + +#define CSI2TX_CONFIG_REG 0x20 +#define CSI2TX_CONFIG_CFG_REQ BIT(2) +#define CSI2TX_CONFIG_SRST_REQ BIT(1) + +#define CSI2TX_DPHY_CFG_REG 0x28 +#define CSI2TX_DPHY_CFG_CLK_RESET BIT(16) +#define CSI2TX_DPHY_CFG_LANE_RESET(n) BIT((n) + 12) +#define CSI2TX_DPHY_CFG_MODE_MASK GENMASK(9, 8) +#define CSI2TX_DPHY_CFG_MODE_LPDT (2 << 8) +#define CSI2TX_DPHY_CFG_MODE_HS (1 << 8) +#define CSI2TX_DPHY_CFG_MODE_ULPS (0 << 8) +#define CSI2TX_DPHY_CFG_CLK_ENABLE BIT(4) +#define CSI2TX_DPHY_CFG_LANE_ENABLE(n) BIT(n) + +#define CSI2TX_DPHY_CLK_WAKEUP_REG 0x2c +#define CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(n) ((n) & 0xffff) + +#define CSI2TX_DT_CFG_REG(n) (0x80 + (n) * 8) +#define CSI2TX_DT_CFG_DT(n) (((n) & 0x3f) << 2) + +#define CSI2TX_DT_FORMAT_REG(n) (0x84 + (n) * 8) +#define CSI2TX_DT_FORMAT_BYTES_PER_LINE(n) (((n) & 0xffff) << 16) +#define CSI2TX_DT_FORMAT_MAX_LINE_NUM(n) ((n) & 0xffff) + +#define CSI2TX_STREAM_IF_CFG_REG(n) (0x100 + (n) * 4) +#define CSI2TX_STREAM_IF_CFG_FILL_LEVEL(n) ((n) & 0x1f) + +/* CSI2TX V2 Registers */ +#define CSI2TX_V2_DPHY_CFG_REG 0x28 +#define CSI2TX_V2_DPHY_CFG_RESET BIT(16) +#define CSI2TX_V2_DPHY_CFG_CLOCK_MODE BIT(10) +#define CSI2TX_V2_DPHY_CFG_MODE_MASK GENMASK(9, 8) +#define CSI2TX_V2_DPHY_CFG_MODE_LPDT (2 << 8) +#define CSI2TX_V2_DPHY_CFG_MODE_HS (1 << 8) +#define CSI2TX_V2_DPHY_CFG_MODE_ULPS (0 << 8) +#define CSI2TX_V2_DPHY_CFG_CLK_ENABLE BIT(4) +#define CSI2TX_V2_DPHY_CFG_LANE_ENABLE(n) BIT(n) + +#define CSI2TX_LANES_MAX 4 +#define CSI2TX_STREAMS_MAX 4 + +enum csi2tx_pads { + CSI2TX_PAD_SOURCE, + CSI2TX_PAD_SINK_STREAM0, + CSI2TX_PAD_SINK_STREAM1, + CSI2TX_PAD_SINK_STREAM2, + CSI2TX_PAD_SINK_STREAM3, + CSI2TX_PAD_MAX, +}; + +struct csi2tx_fmt { + u32 mbus; + u32 dt; + u32 bpp; +}; + +struct csi2tx_priv; + +/* CSI2TX Variant Operations */ +struct csi2tx_vops { + void (*dphy_setup)(struct csi2tx_priv *csi2tx); +}; + +struct csi2tx_priv { + struct device *dev; + unsigned int count; + + /* + * Used to prevent race conditions between multiple, + * concurrent calls to start and stop. + */ + struct mutex lock; + + void __iomem *base; + + struct csi2tx_vops *vops; + + struct clk *esc_clk; + struct clk *p_clk; + struct clk *pixel_clk[CSI2TX_STREAMS_MAX]; + + struct v4l2_subdev subdev; + struct media_pad pads[CSI2TX_PAD_MAX]; + struct v4l2_mbus_framefmt pad_fmts[CSI2TX_PAD_MAX]; + + bool has_internal_dphy; + u8 lanes[CSI2TX_LANES_MAX]; + unsigned int num_lanes; + unsigned int max_lanes; + unsigned int max_streams; +}; + +static const struct csi2tx_fmt csi2tx_formats[] = { + { + .mbus = MEDIA_BUS_FMT_UYVY8_1X16, + .bpp = 2, + .dt = MIPI_CSI2_DT_YUV422_8B, + }, + { + .mbus = MEDIA_BUS_FMT_RGB888_1X24, + .bpp = 3, + .dt = MIPI_CSI2_DT_RGB888, + }, +}; + +static const struct v4l2_mbus_framefmt fmt_default = { + .width = 1280, + .height = 720, + .code = MEDIA_BUS_FMT_RGB888_1X24, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_DEFAULT, +}; + +static inline +struct csi2tx_priv *v4l2_subdev_to_csi2tx(struct v4l2_subdev *subdev) +{ + return container_of(subdev, struct csi2tx_priv, subdev); +} + +static const struct csi2tx_fmt *csi2tx_get_fmt_from_mbus(u32 mbus) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(csi2tx_formats); i++) + if (csi2tx_formats[i].mbus == mbus) + return &csi2tx_formats[i]; + + return NULL; +} + +static int csi2tx_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->pad || code->index >= ARRAY_SIZE(csi2tx_formats)) + return -EINVAL; + + code->code = csi2tx_formats[code->index].mbus; + + return 0; +} + +static struct v4l2_mbus_framefmt * +__csi2tx_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + struct csi2tx_priv *csi2tx = v4l2_subdev_to_csi2tx(subdev); + + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(subdev, sd_state, + fmt->pad); + + return &csi2tx->pad_fmts[fmt->pad]; +} + +static int csi2tx_get_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + const struct v4l2_mbus_framefmt *format; + + /* Multiplexed pad? */ + if (fmt->pad == CSI2TX_PAD_SOURCE) + return -EINVAL; + + format = __csi2tx_get_pad_format(subdev, sd_state, fmt); + if (!format) + return -EINVAL; + + fmt->format = *format; + + return 0; +} + +static int csi2tx_set_pad_format(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *fmt) +{ + const struct v4l2_mbus_framefmt *src_format = &fmt->format; + struct v4l2_mbus_framefmt *dst_format; + + /* Multiplexed pad? */ + if (fmt->pad == CSI2TX_PAD_SOURCE) + return -EINVAL; + + if (!csi2tx_get_fmt_from_mbus(fmt->format.code)) + src_format = &fmt_default; + + dst_format = __csi2tx_get_pad_format(subdev, sd_state, fmt); + if (!dst_format) + return -EINVAL; + + *dst_format = *src_format; + + return 0; +} + +static const struct v4l2_subdev_pad_ops csi2tx_pad_ops = { + .enum_mbus_code = csi2tx_enum_mbus_code, + .get_fmt = csi2tx_get_pad_format, + .set_fmt = csi2tx_set_pad_format, +}; + +/* Set Wake Up value in the D-PHY */ +static void csi2tx_dphy_set_wakeup(struct csi2tx_priv *csi2tx) +{ + writel(CSI2TX_DPHY_CLK_WAKEUP_ULPS_CYCLES(32), + csi2tx->base + CSI2TX_DPHY_CLK_WAKEUP_REG); +} + +/* + * Finishes the D-PHY initialization + * reg dphy cfg value to be used + */ +static void csi2tx_dphy_init_finish(struct csi2tx_priv *csi2tx, u32 reg) +{ + unsigned int i; + + udelay(10); + + /* Enable our (clock and data) lanes */ + reg |= CSI2TX_DPHY_CFG_CLK_ENABLE; + for (i = 0; i < csi2tx->num_lanes; i++) + reg |= CSI2TX_DPHY_CFG_LANE_ENABLE(csi2tx->lanes[i] - 1); + writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG); + + udelay(10); + + /* Switch to HS mode */ + reg &= ~CSI2TX_DPHY_CFG_MODE_MASK; + writel(reg | CSI2TX_DPHY_CFG_MODE_HS, + csi2tx->base + CSI2TX_DPHY_CFG_REG); +} + +/* Configures D-PHY in CSIv1.3 */ +static void csi2tx_dphy_setup(struct csi2tx_priv *csi2tx) +{ + u32 reg; + unsigned int i; + + csi2tx_dphy_set_wakeup(csi2tx); + + /* Put our lanes (clock and data) out of reset */ + reg = CSI2TX_DPHY_CFG_CLK_RESET | CSI2TX_DPHY_CFG_MODE_LPDT; + for (i = 0; i < csi2tx->num_lanes; i++) + reg |= CSI2TX_DPHY_CFG_LANE_RESET(csi2tx->lanes[i] - 1); + writel(reg, csi2tx->base + CSI2TX_DPHY_CFG_REG); + + csi2tx_dphy_init_finish(csi2tx, reg); +} + +/* Configures D-PHY in CSIv2 */ +static void csi2tx_v2_dphy_setup(struct csi2tx_priv *csi2tx) +{ + u32 reg; + + csi2tx_dphy_set_wakeup(csi2tx); + + /* Put our lanes (clock and data) out of reset */ + reg = CSI2TX_V2_DPHY_CFG_RESET | CSI2TX_V2_DPHY_CFG_MODE_LPDT; + writel(reg, csi2tx->base + CSI2TX_V2_DPHY_CFG_REG); + + csi2tx_dphy_init_finish(csi2tx, reg); +} + +static void csi2tx_reset(struct csi2tx_priv *csi2tx) +{ + writel(CSI2TX_CONFIG_SRST_REQ, csi2tx->base + CSI2TX_CONFIG_REG); + + udelay(10); +} + +static int csi2tx_start(struct csi2tx_priv *csi2tx) +{ + struct media_entity *entity = &csi2tx->subdev.entity; + struct media_link *link; + unsigned int i; + + csi2tx_reset(csi2tx); + + writel(CSI2TX_CONFIG_CFG_REQ, csi2tx->base + CSI2TX_CONFIG_REG); + + udelay(10); + + if (csi2tx->vops && csi2tx->vops->dphy_setup) { + csi2tx->vops->dphy_setup(csi2tx); + udelay(10); + } + + /* + * Create a static mapping between the CSI virtual channels + * and the input streams. + * + * This should be enhanced, but v4l2 lacks the support for + * changing that mapping dynamically at the moment. + * + * We're protected from the userspace setting up links at the + * same time by the upper layer having called + * media_pipeline_start(). + */ + list_for_each_entry(link, &entity->links, list) { + struct v4l2_mbus_framefmt *mfmt; + const struct csi2tx_fmt *fmt; + unsigned int stream; + int pad_idx = -1; + + /* Only consider our enabled input pads */ + for (i = CSI2TX_PAD_SINK_STREAM0; i < CSI2TX_PAD_MAX; i++) { + struct media_pad *pad = &csi2tx->pads[i]; + + if ((pad == link->sink) && + (link->flags & MEDIA_LNK_FL_ENABLED)) { + pad_idx = i; + break; + } + } + + if (pad_idx < 0) + continue; + + mfmt = &csi2tx->pad_fmts[pad_idx]; + fmt = csi2tx_get_fmt_from_mbus(mfmt->code); + if (!fmt) + continue; + + stream = pad_idx - CSI2TX_PAD_SINK_STREAM0; + + /* + * We use the stream ID there, but it's wrong. + * + * A stream could very well send a data type that is + * not equal to its stream ID. We need to find a + * proper way to address it. + */ + writel(CSI2TX_DT_CFG_DT(fmt->dt), + csi2tx->base + CSI2TX_DT_CFG_REG(stream)); + + writel(CSI2TX_DT_FORMAT_BYTES_PER_LINE(mfmt->width * fmt->bpp) | + CSI2TX_DT_FORMAT_MAX_LINE_NUM(mfmt->height + 1), + csi2tx->base + CSI2TX_DT_FORMAT_REG(stream)); + + /* + * TODO: This needs to be calculated based on the + * output CSI2 clock rate. + */ + writel(CSI2TX_STREAM_IF_CFG_FILL_LEVEL(4), + csi2tx->base + CSI2TX_STREAM_IF_CFG_REG(stream)); + } + + /* Disable the configuration mode */ + writel(0, csi2tx->base + CSI2TX_CONFIG_REG); + + return 0; +} + +static void csi2tx_stop(struct csi2tx_priv *csi2tx) +{ + writel(CSI2TX_CONFIG_CFG_REQ | CSI2TX_CONFIG_SRST_REQ, + csi2tx->base + CSI2TX_CONFIG_REG); +} + +static int csi2tx_s_stream(struct v4l2_subdev *subdev, int enable) +{ + struct csi2tx_priv *csi2tx = v4l2_subdev_to_csi2tx(subdev); + int ret = 0; + + mutex_lock(&csi2tx->lock); + + if (enable) { + /* + * If we're not the first users, there's no need to + * enable the whole controller. + */ + if (!csi2tx->count) { + ret = csi2tx_start(csi2tx); + if (ret) + goto out; + } + + csi2tx->count++; + } else { + csi2tx->count--; + + /* + * Let the last user turn off the lights. + */ + if (!csi2tx->count) + csi2tx_stop(csi2tx); + } + +out: + mutex_unlock(&csi2tx->lock); + return ret; +} + +static const struct v4l2_subdev_video_ops csi2tx_video_ops = { + .s_stream = csi2tx_s_stream, +}; + +static const struct v4l2_subdev_ops csi2tx_subdev_ops = { + .pad = &csi2tx_pad_ops, + .video = &csi2tx_video_ops, +}; + +static int csi2tx_get_resources(struct csi2tx_priv *csi2tx, + struct platform_device *pdev) +{ + unsigned int i; + u32 dev_cfg; + int ret; + + csi2tx->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(csi2tx->base)) + return PTR_ERR(csi2tx->base); + + csi2tx->p_clk = devm_clk_get(&pdev->dev, "p_clk"); + if (IS_ERR(csi2tx->p_clk)) { + dev_err(&pdev->dev, "Couldn't get p_clk\n"); + return PTR_ERR(csi2tx->p_clk); + } + + csi2tx->esc_clk = devm_clk_get(&pdev->dev, "esc_clk"); + if (IS_ERR(csi2tx->esc_clk)) { + dev_err(&pdev->dev, "Couldn't get the esc_clk\n"); + return PTR_ERR(csi2tx->esc_clk); + } + + ret = clk_prepare_enable(csi2tx->p_clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't prepare and enable p_clk\n"); + return ret; + } + + dev_cfg = readl(csi2tx->base + CSI2TX_DEVICE_CONFIG_REG); + clk_disable_unprepare(csi2tx->p_clk); + + csi2tx->max_lanes = dev_cfg & CSI2TX_DEVICE_CONFIG_LANES_MASK; + if (csi2tx->max_lanes > CSI2TX_LANES_MAX) { + dev_err(&pdev->dev, "Invalid number of lanes: %u\n", + csi2tx->max_lanes); + return -EINVAL; + } + + csi2tx->max_streams = (dev_cfg & CSI2TX_DEVICE_CONFIG_STREAMS_MASK) >> 4; + if (csi2tx->max_streams > CSI2TX_STREAMS_MAX) { + dev_err(&pdev->dev, "Invalid number of streams: %u\n", + csi2tx->max_streams); + return -EINVAL; + } + + csi2tx->has_internal_dphy = !!(dev_cfg & CSI2TX_DEVICE_CONFIG_HAS_DPHY); + + for (i = 0; i < csi2tx->max_streams; i++) { + char clk_name[16]; + + snprintf(clk_name, sizeof(clk_name), "pixel_if%u_clk", i); + csi2tx->pixel_clk[i] = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(csi2tx->pixel_clk[i])) { + dev_err(&pdev->dev, "Couldn't get clock %s\n", + clk_name); + return PTR_ERR(csi2tx->pixel_clk[i]); + } + } + + return 0; +} + +static int csi2tx_check_lanes(struct csi2tx_priv *csi2tx) +{ + struct v4l2_fwnode_endpoint v4l2_ep = { .bus_type = 0 }; + struct device_node *ep; + int ret, i; + + ep = of_graph_get_endpoint_by_regs(csi2tx->dev->of_node, 0, 0); + if (!ep) + return -EINVAL; + + ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &v4l2_ep); + if (ret) { + dev_err(csi2tx->dev, "Could not parse v4l2 endpoint\n"); + goto out; + } + + if (v4l2_ep.bus_type != V4L2_MBUS_CSI2_DPHY) { + dev_err(csi2tx->dev, "Unsupported media bus type: 0x%x\n", + v4l2_ep.bus_type); + ret = -EINVAL; + goto out; + } + + csi2tx->num_lanes = v4l2_ep.bus.mipi_csi2.num_data_lanes; + if (csi2tx->num_lanes > csi2tx->max_lanes) { + dev_err(csi2tx->dev, + "Current configuration uses more lanes than supported\n"); + ret = -EINVAL; + goto out; + } + + for (i = 0; i < csi2tx->num_lanes; i++) { + if (v4l2_ep.bus.mipi_csi2.data_lanes[i] < 1) { + dev_err(csi2tx->dev, "Invalid lane[%d] number: %u\n", + i, v4l2_ep.bus.mipi_csi2.data_lanes[i]); + ret = -EINVAL; + goto out; + } + } + + memcpy(csi2tx->lanes, v4l2_ep.bus.mipi_csi2.data_lanes, + sizeof(csi2tx->lanes)); + +out: + of_node_put(ep); + return ret; +} + +static const struct csi2tx_vops csi2tx_vops = { + .dphy_setup = csi2tx_dphy_setup, +}; + +static const struct csi2tx_vops csi2tx_v2_vops = { + .dphy_setup = csi2tx_v2_dphy_setup, +}; + +static const struct of_device_id csi2tx_of_table[] = { + { + .compatible = "cdns,csi2tx", + .data = &csi2tx_vops + }, + { + .compatible = "cdns,csi2tx-1.3", + .data = &csi2tx_vops + }, + { + .compatible = "cdns,csi2tx-2.1", + .data = &csi2tx_v2_vops + }, + { } +}; +MODULE_DEVICE_TABLE(of, csi2tx_of_table); + +static int csi2tx_probe(struct platform_device *pdev) +{ + struct csi2tx_priv *csi2tx; + const struct of_device_id *of_id; + unsigned int i; + int ret; + + csi2tx = kzalloc(sizeof(*csi2tx), GFP_KERNEL); + if (!csi2tx) + return -ENOMEM; + platform_set_drvdata(pdev, csi2tx); + mutex_init(&csi2tx->lock); + csi2tx->dev = &pdev->dev; + + ret = csi2tx_get_resources(csi2tx, pdev); + if (ret) + goto err_free_priv; + + of_id = of_match_node(csi2tx_of_table, pdev->dev.of_node); + csi2tx->vops = (struct csi2tx_vops *)of_id->data; + + v4l2_subdev_init(&csi2tx->subdev, &csi2tx_subdev_ops); + csi2tx->subdev.owner = THIS_MODULE; + csi2tx->subdev.dev = &pdev->dev; + csi2tx->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + snprintf(csi2tx->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s.%s", + KBUILD_MODNAME, dev_name(&pdev->dev)); + + ret = csi2tx_check_lanes(csi2tx); + if (ret) + goto err_free_priv; + + /* Create our media pads */ + csi2tx->subdev.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + csi2tx->pads[CSI2TX_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + for (i = CSI2TX_PAD_SINK_STREAM0; i < CSI2TX_PAD_MAX; i++) + csi2tx->pads[i].flags = MEDIA_PAD_FL_SINK; + + /* + * Only the input pads are considered to have a format at the + * moment. The CSI link can multiplex various streams with + * different formats, and we can't expose this in v4l2 right + * now. + */ + for (i = CSI2TX_PAD_SINK_STREAM0; i < CSI2TX_PAD_MAX; i++) + csi2tx->pad_fmts[i] = fmt_default; + + ret = media_entity_pads_init(&csi2tx->subdev.entity, CSI2TX_PAD_MAX, + csi2tx->pads); + if (ret) + goto err_free_priv; + + ret = v4l2_async_register_subdev(&csi2tx->subdev); + if (ret < 0) + goto err_free_priv; + + dev_info(&pdev->dev, + "Probed CSI2TX with %u/%u lanes, %u streams, %s D-PHY\n", + csi2tx->num_lanes, csi2tx->max_lanes, csi2tx->max_streams, + csi2tx->has_internal_dphy ? "internal" : "no"); + + return 0; + +err_free_priv: + kfree(csi2tx); + return ret; +} + +static int csi2tx_remove(struct platform_device *pdev) +{ + struct csi2tx_priv *csi2tx = platform_get_drvdata(pdev); + + v4l2_async_unregister_subdev(&csi2tx->subdev); + kfree(csi2tx); + + return 0; +} + +static struct platform_driver csi2tx_driver = { + .probe = csi2tx_probe, + .remove = csi2tx_remove, + + .driver = { + .name = "cdns-csi2tx", + .of_match_table = csi2tx_of_table, + }, +}; +module_platform_driver(csi2tx_driver); +MODULE_AUTHOR("Maxime Ripard "); +MODULE_DESCRIPTION("Cadence CSI2-TX controller"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3