From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../mediatek/vcodec/mtk_vcodec_dec_stateless.c | 511 +++++++++++++++++++++ 1 file changed, 511 insertions(+) create mode 100644 drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c (limited to 'drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c') diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c new file mode 100644 index 000000000..ffbcee04d --- /dev/null +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c @@ -0,0 +1,511 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include +#include +#include + +#include "mtk_vcodec_drv.h" +#include "mtk_vcodec_dec.h" +#include "mtk_vcodec_intr.h" +#include "mtk_vcodec_util.h" +#include "mtk_vcodec_dec_pm.h" +#include "vdec_drv_if.h" + +/** + * struct mtk_stateless_control - CID control type + * @cfg: control configuration + * @codec_type: codec type (V4L2 pixel format) for CID control type + */ +struct mtk_stateless_control { + struct v4l2_ctrl_config cfg; + int codec_type; +}; + +static const struct mtk_stateless_control mtk_stateless_controls[] = { + { + .cfg = { + .id = V4L2_CID_STATELESS_H264_SPS, + }, + .codec_type = V4L2_PIX_FMT_H264_SLICE, + }, + { + .cfg = { + .id = V4L2_CID_STATELESS_H264_PPS, + }, + .codec_type = V4L2_PIX_FMT_H264_SLICE, + }, + { + .cfg = { + .id = V4L2_CID_STATELESS_H264_SCALING_MATRIX, + }, + .codec_type = V4L2_PIX_FMT_H264_SLICE, + }, + { + .cfg = { + .id = V4L2_CID_STATELESS_H264_DECODE_PARAMS, + }, + .codec_type = V4L2_PIX_FMT_H264_SLICE, + }, + { + .cfg = { + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE, + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN, + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH, + .menu_skip_mask = + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) | + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED), + }, + .codec_type = V4L2_PIX_FMT_H264_SLICE, + }, + { + .cfg = { + .id = V4L2_CID_STATELESS_H264_DECODE_MODE, + .min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED, + .def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED, + .max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED, + }, + .codec_type = V4L2_PIX_FMT_H264_SLICE, + }, + { + .cfg = { + .id = V4L2_CID_STATELESS_H264_START_CODE, + .min = V4L2_STATELESS_H264_START_CODE_ANNEX_B, + .def = V4L2_STATELESS_H264_START_CODE_ANNEX_B, + .max = V4L2_STATELESS_H264_START_CODE_ANNEX_B, + }, + .codec_type = V4L2_PIX_FMT_H264_SLICE, + }, + { + .cfg = { + .id = V4L2_CID_STATELESS_VP8_FRAME, + }, + .codec_type = V4L2_PIX_FMT_VP8_FRAME, + }, + { + .cfg = { + .id = V4L2_CID_MPEG_VIDEO_VP8_PROFILE, + .min = V4L2_MPEG_VIDEO_VP8_PROFILE_0, + .def = V4L2_MPEG_VIDEO_VP8_PROFILE_0, + .max = V4L2_MPEG_VIDEO_VP8_PROFILE_3, + }, + .codec_type = V4L2_PIX_FMT_VP8_FRAME, + }, + { + .cfg = { + .id = V4L2_CID_STATELESS_VP9_FRAME, + }, + .codec_type = V4L2_PIX_FMT_VP9_FRAME, + }, + { + .cfg = { + .id = V4L2_CID_MPEG_VIDEO_VP9_PROFILE, + .min = V4L2_MPEG_VIDEO_VP9_PROFILE_0, + .def = V4L2_MPEG_VIDEO_VP9_PROFILE_0, + .max = V4L2_MPEG_VIDEO_VP9_PROFILE_3, + }, + .codec_type = V4L2_PIX_FMT_VP9_FRAME, + }, +}; + +#define NUM_CTRLS ARRAY_SIZE(mtk_stateless_controls) + +static struct mtk_video_fmt mtk_video_formats[5]; + +static struct mtk_video_fmt default_out_format; +static struct mtk_video_fmt default_cap_format; +static unsigned int num_formats; + +static const struct v4l2_frmsize_stepwise stepwise_fhd = { + .min_width = MTK_VDEC_MIN_W, + .max_width = MTK_VDEC_MAX_W, + .step_width = 16, + .min_height = MTK_VDEC_MIN_H, + .max_height = MTK_VDEC_MAX_H, + .step_height = 16 +}; + +static void mtk_vdec_stateless_cap_to_disp(struct mtk_vcodec_ctx *ctx, int error, + struct media_request *src_buf_req) +{ + struct vb2_v4l2_buffer *vb2_dst; + enum vb2_buffer_state state; + + if (error) + state = VB2_BUF_STATE_ERROR; + else + state = VB2_BUF_STATE_DONE; + + vb2_dst = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); + if (vb2_dst) { + v4l2_m2m_buf_done(vb2_dst, state); + mtk_v4l2_debug(2, "free frame buffer id:%d to done list", + vb2_dst->vb2_buf.index); + } else { + mtk_v4l2_err("dst buffer is NULL"); + } + + if (src_buf_req) + v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl); +} + +static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx) +{ + struct mtk_video_dec_buf *framebuf; + struct vb2_v4l2_buffer *vb2_v4l2; + struct vb2_buffer *dst_buf; + struct vdec_fb *pfb; + + vb2_v4l2 = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); + if (!vb2_v4l2) { + mtk_v4l2_debug(1, "[%d] dst_buf empty!!", ctx->id); + return NULL; + } + + dst_buf = &vb2_v4l2->vb2_buf; + framebuf = container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb); + + pfb = &framebuf->frame_buffer; + pfb->base_y.va = vb2_plane_vaddr(dst_buf, 0); + pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0); + pfb->base_y.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0]; + + if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) { + pfb->base_c.va = vb2_plane_vaddr(dst_buf, 1); + pfb->base_c.dma_addr = + vb2_dma_contig_plane_dma_addr(dst_buf, 1); + pfb->base_c.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1]; + } + mtk_v4l2_debug(1, "id=%d Framebuf pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx frame_count = %d", + dst_buf->index, pfb, pfb->base_y.va, &pfb->base_y.dma_addr, + &pfb->base_c.dma_addr, pfb->base_y.size, ctx->decoded_frame_cnt); + + return pfb; +} + +static void vb2ops_vdec_buf_request_complete(struct vb2_buffer *vb) +{ + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + + v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->ctrl_hdl); +} + +static void mtk_vdec_worker(struct work_struct *work) +{ + struct mtk_vcodec_ctx *ctx = + container_of(work, struct mtk_vcodec_ctx, decode_work); + struct mtk_vcodec_dev *dev = ctx->dev; + struct vb2_v4l2_buffer *vb2_v4l2_src; + struct vb2_buffer *vb2_src; + struct mtk_vcodec_mem *bs_src; + struct mtk_video_dec_buf *dec_buf_src; + struct media_request *src_buf_req; + enum vb2_buffer_state state; + bool res_chg = false; + int ret; + + vb2_v4l2_src = v4l2_m2m_next_src_buf(ctx->m2m_ctx); + if (!vb2_v4l2_src) { + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); + mtk_v4l2_debug(1, "[%d] no available source buffer", ctx->id); + return; + } + + vb2_src = &vb2_v4l2_src->vb2_buf; + dec_buf_src = container_of(vb2_v4l2_src, struct mtk_video_dec_buf, + m2m_buf.vb); + bs_src = &dec_buf_src->bs_buffer; + + mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p", ctx->id, + vb2_src->vb2_queue->type, vb2_src->index, vb2_src); + + bs_src->va = vb2_plane_vaddr(vb2_src, 0); + bs_src->dma_addr = vb2_dma_contig_plane_dma_addr(vb2_src, 0); + bs_src->size = (size_t)vb2_src->planes[0].bytesused; + if (!bs_src->va) { + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); + mtk_v4l2_err("[%d] id=%d source buffer is NULL", ctx->id, + vb2_src->index); + return; + } + + mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p", + ctx->id, bs_src->va, &bs_src->dma_addr, bs_src->size, vb2_src); + /* Apply request controls. */ + src_buf_req = vb2_src->req_obj.req; + if (src_buf_req) + v4l2_ctrl_request_setup(src_buf_req, &ctx->ctrl_hdl); + else + mtk_v4l2_err("vb2 buffer media request is NULL"); + + ret = vdec_if_decode(ctx, bs_src, NULL, &res_chg); + if (ret) { + mtk_v4l2_err(" <===[%d], src_buf[%d] sz=0x%zx pts=%llu vdec_if_decode() ret=%d res_chg=%d===>", + ctx->id, vb2_src->index, bs_src->size, + vb2_src->timestamp, ret, res_chg); + if (ret == -EIO) { + mutex_lock(&ctx->lock); + dec_buf_src->error = true; + mutex_unlock(&ctx->lock); + } + } + + state = ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE; + if (!IS_VDEC_LAT_ARCH(dev->vdec_pdata->hw_arch) || + ctx->current_codec == V4L2_PIX_FMT_VP8_FRAME) { + v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx, state); + if (src_buf_req) + v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl); + } else { + v4l2_m2m_src_buf_remove(ctx->m2m_ctx); + v4l2_m2m_buf_done(vb2_v4l2_src, state); + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx); + } +} + +static void vb2ops_vdec_stateless_buf_queue(struct vb2_buffer *vb) +{ + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); + struct vb2_v4l2_buffer *vb2_v4l2 = to_vb2_v4l2_buffer(vb); + + mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p", ctx->id, vb->vb2_queue->type, vb->index, vb); + + mutex_lock(&ctx->lock); + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2); + mutex_unlock(&ctx->lock); + if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) + return; + + /* If an OUTPUT buffer, we may need to update the state */ + if (ctx->state == MTK_STATE_INIT) { + ctx->state = MTK_STATE_HEADER; + mtk_v4l2_debug(1, "Init driver from init to header."); + } else { + mtk_v4l2_debug(3, "[%d] already init driver %d", ctx->id, ctx->state); + } +} + +static int mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx) +{ + bool res_chg; + + return vdec_if_decode(ctx, NULL, NULL, &res_chg); +} + +static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx) +{ + unsigned int i; + + v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS); + if (ctx->ctrl_hdl.error) { + mtk_v4l2_err("v4l2_ctrl_handler_init failed\n"); + return ctx->ctrl_hdl.error; + } + + for (i = 0; i < NUM_CTRLS; i++) { + struct v4l2_ctrl_config cfg = mtk_stateless_controls[i].cfg; + + v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL); + if (ctx->ctrl_hdl.error) { + mtk_v4l2_err("Adding control %d failed %d", i, ctx->ctrl_hdl.error); + return ctx->ctrl_hdl.error; + } + } + + v4l2_ctrl_handler_setup(&ctx->ctrl_hdl); + + return 0; +} + +static int fops_media_request_validate(struct media_request *mreq) +{ + const unsigned int buffer_cnt = vb2_request_buffer_cnt(mreq); + + switch (buffer_cnt) { + case 1: + /* We expect exactly one buffer with the request */ + break; + case 0: + mtk_v4l2_debug(1, "No buffer provided with the request"); + return -ENOENT; + default: + mtk_v4l2_debug(1, "Too many buffers (%d) provided with the request", + buffer_cnt); + return -EINVAL; + } + + return vb2_request_validate(mreq); +} + +const struct media_device_ops mtk_vcodec_media_ops = { + .req_validate = fops_media_request_validate, + .req_queue = v4l2_m2m_request_queue, +}; + +static void mtk_vcodec_add_formats(unsigned int fourcc, + struct mtk_vcodec_ctx *ctx) +{ + struct mtk_vcodec_dev *dev = ctx->dev; + const struct mtk_vcodec_dec_pdata *pdata = dev->vdec_pdata; + int count_formats = *pdata->num_formats; + + switch (fourcc) { + case V4L2_PIX_FMT_H264_SLICE: + case V4L2_PIX_FMT_VP8_FRAME: + case V4L2_PIX_FMT_VP9_FRAME: + mtk_video_formats[count_formats].fourcc = fourcc; + mtk_video_formats[count_formats].type = MTK_FMT_DEC; + mtk_video_formats[count_formats].num_planes = 1; + mtk_video_formats[count_formats].frmsize = stepwise_fhd; + + if (!(ctx->dev->dec_capability & VCODEC_CAPABILITY_4K_DISABLED) && + fourcc != V4L2_PIX_FMT_VP8_FRAME) { + mtk_video_formats[count_formats].frmsize.max_width = + VCODEC_DEC_4K_CODED_WIDTH; + mtk_video_formats[count_formats].frmsize.max_height = + VCODEC_DEC_4K_CODED_HEIGHT; + } + break; + case V4L2_PIX_FMT_MM21: + case V4L2_PIX_FMT_MT21C: + mtk_video_formats[count_formats].fourcc = fourcc; + mtk_video_formats[count_formats].type = MTK_FMT_FRAME; + mtk_video_formats[count_formats].num_planes = 2; + break; + default: + mtk_v4l2_err("Can not add unsupported format type"); + return; + } + + num_formats++; + mtk_v4l2_debug(3, "num_formats: %d dec_capability: 0x%x", + count_formats, ctx->dev->dec_capability); +} + +static void mtk_vcodec_get_supported_formats(struct mtk_vcodec_ctx *ctx) +{ + int cap_format_count = 0, out_format_count = 0; + + if (num_formats) + return; + + if (ctx->dev->dec_capability & MTK_VDEC_FORMAT_MM21) { + mtk_vcodec_add_formats(V4L2_PIX_FMT_MM21, ctx); + cap_format_count++; + } + if (ctx->dev->dec_capability & MTK_VDEC_FORMAT_MT21C) { + mtk_vcodec_add_formats(V4L2_PIX_FMT_MT21C, ctx); + cap_format_count++; + } + if (ctx->dev->dec_capability & MTK_VDEC_FORMAT_H264_SLICE) { + mtk_vcodec_add_formats(V4L2_PIX_FMT_H264_SLICE, ctx); + out_format_count++; + } + if (ctx->dev->dec_capability & MTK_VDEC_FORMAT_VP8_FRAME) { + mtk_vcodec_add_formats(V4L2_PIX_FMT_VP8_FRAME, ctx); + out_format_count++; + } + if (ctx->dev->dec_capability & MTK_VDEC_FORMAT_VP9_FRAME) { + mtk_vcodec_add_formats(V4L2_PIX_FMT_VP9_FRAME, ctx); + out_format_count++; + } + + if (cap_format_count) + default_cap_format = mtk_video_formats[cap_format_count - 1]; + if (out_format_count) + default_out_format = + mtk_video_formats[cap_format_count + out_format_count - 1]; +} + +static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx) +{ + struct vb2_queue *src_vq; + + src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx, + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE); + + if (!ctx->dev->vdec_pdata->is_subdev_supported) + ctx->dev->dec_capability |= + MTK_VDEC_FORMAT_H264_SLICE | MTK_VDEC_FORMAT_MM21; + mtk_vcodec_get_supported_formats(ctx); + + /* Support request api for output plane */ + src_vq->supports_requests = true; + src_vq->requires_requests = true; +} + +static int vb2ops_vdec_out_buf_validate(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + + vbuf->field = V4L2_FIELD_NONE; + return 0; +} + +static struct vb2_ops mtk_vdec_request_vb2_ops = { + .queue_setup = vb2ops_vdec_queue_setup, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = vb2ops_vdec_start_streaming, + .stop_streaming = vb2ops_vdec_stop_streaming, + + .buf_queue = vb2ops_vdec_stateless_buf_queue, + .buf_out_validate = vb2ops_vdec_out_buf_validate, + .buf_init = vb2ops_vdec_buf_init, + .buf_prepare = vb2ops_vdec_buf_prepare, + .buf_finish = vb2ops_vdec_buf_finish, + .buf_request_complete = vb2ops_vdec_buf_request_complete, +}; + +const struct mtk_vcodec_dec_pdata mtk_vdec_8183_pdata = { + .init_vdec_params = mtk_init_vdec_params, + .ctrls_setup = mtk_vcodec_dec_ctrls_setup, + .vdec_vb2_ops = &mtk_vdec_request_vb2_ops, + .vdec_formats = mtk_video_formats, + .num_formats = &num_formats, + .default_out_fmt = &default_out_format, + .default_cap_fmt = &default_cap_format, + .uses_stateless_api = true, + .worker = mtk_vdec_worker, + .flush_decoder = mtk_vdec_flush_decoder, + .cap_to_disp = mtk_vdec_stateless_cap_to_disp, + .get_cap_buffer = vdec_get_cap_buffer, + .is_subdev_supported = false, + .hw_arch = MTK_VDEC_PURE_SINGLE_CORE, +}; + +/* This platform data is used for one lat and one core architecture. */ +const struct mtk_vcodec_dec_pdata mtk_lat_sig_core_pdata = { + .init_vdec_params = mtk_init_vdec_params, + .ctrls_setup = mtk_vcodec_dec_ctrls_setup, + .vdec_vb2_ops = &mtk_vdec_request_vb2_ops, + .vdec_formats = mtk_video_formats, + .num_formats = &num_formats, + .default_out_fmt = &default_out_format, + .default_cap_fmt = &default_cap_format, + .uses_stateless_api = true, + .worker = mtk_vdec_worker, + .flush_decoder = mtk_vdec_flush_decoder, + .cap_to_disp = mtk_vdec_stateless_cap_to_disp, + .get_cap_buffer = vdec_get_cap_buffer, + .is_subdev_supported = true, + .hw_arch = MTK_VDEC_LAT_SINGLE_CORE, +}; + +const struct mtk_vcodec_dec_pdata mtk_vdec_single_core_pdata = { + .init_vdec_params = mtk_init_vdec_params, + .ctrls_setup = mtk_vcodec_dec_ctrls_setup, + .vdec_vb2_ops = &mtk_vdec_request_vb2_ops, + .vdec_formats = mtk_video_formats, + .num_formats = &num_formats, + .default_out_fmt = &default_out_format, + .default_cap_fmt = &default_cap_format, + .uses_stateless_api = true, + .worker = mtk_vdec_worker, + .flush_decoder = mtk_vdec_flush_decoder, + .cap_to_disp = mtk_vdec_stateless_cap_to_disp, + .get_cap_buffer = vdec_get_cap_buffer, + .is_subdev_supported = true, + .hw_arch = MTK_VDEC_PURE_SINGLE_CORE, +}; -- cgit v1.2.3