From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/platform/rockchip/rga/rga-hw.c | 416 +++++++++++++++++++++++++++ 1 file changed, 416 insertions(+) create mode 100644 drivers/media/platform/rockchip/rga/rga-hw.c (limited to 'drivers/media/platform/rockchip/rga/rga-hw.c') diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c new file mode 100644 index 000000000..aaa96f256 --- /dev/null +++ b/drivers/media/platform/rockchip/rga/rga-hw.c @@ -0,0 +1,416 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd + * Author: Jacob Chen + */ + +#include + +#include "rga-hw.h" +#include "rga.h" + +enum e_rga_start_pos { + LT = 0, + LB = 1, + RT = 2, + RB = 3, +}; + +struct rga_addr_offset { + unsigned int y_off; + unsigned int u_off; + unsigned int v_off; +}; + +struct rga_corners_addr_offset { + struct rga_addr_offset left_top; + struct rga_addr_offset right_top; + struct rga_addr_offset left_bottom; + struct rga_addr_offset right_bottom; +}; + +static unsigned int rga_get_scaling(unsigned int src, unsigned int dst) +{ + /* + * The rga hw scaling factor is a normalized inverse of the + * scaling factor. + * For example: When source width is 100 and destination width is 200 + * (scaling of 2x), then the hw factor is NC * 100 / 200. + * The normalization factor (NC) is 2^16 = 0x10000. + */ + + return (src > dst) ? ((dst << 16) / src) : ((src << 16) / dst); +} + +static struct rga_corners_addr_offset +rga_get_addr_offset(struct rga_frame *frm, unsigned int x, unsigned int y, + unsigned int w, unsigned int h) +{ + struct rga_corners_addr_offset offsets; + struct rga_addr_offset *lt, *lb, *rt, *rb; + unsigned int x_div = 0, + y_div = 0, uv_stride = 0, pixel_width = 0, uv_factor = 0; + + lt = &offsets.left_top; + lb = &offsets.left_bottom; + rt = &offsets.right_top; + rb = &offsets.right_bottom; + + x_div = frm->fmt->x_div; + y_div = frm->fmt->y_div; + uv_factor = frm->fmt->uv_factor; + uv_stride = frm->stride / x_div; + pixel_width = frm->stride / frm->width; + + lt->y_off = y * frm->stride + x * pixel_width; + lt->u_off = + frm->width * frm->height + (y / y_div) * uv_stride + x / x_div; + lt->v_off = lt->u_off + frm->width * frm->height / uv_factor; + + lb->y_off = lt->y_off + (h - 1) * frm->stride; + lb->u_off = lt->u_off + (h / y_div - 1) * uv_stride; + lb->v_off = lt->v_off + (h / y_div - 1) * uv_stride; + + rt->y_off = lt->y_off + (w - 1) * pixel_width; + rt->u_off = lt->u_off + w / x_div - 1; + rt->v_off = lt->v_off + w / x_div - 1; + + rb->y_off = lb->y_off + (w - 1) * pixel_width; + rb->u_off = lb->u_off + w / x_div - 1; + rb->v_off = lb->v_off + w / x_div - 1; + + return offsets; +} + +static struct rga_addr_offset *rga_lookup_draw_pos(struct + rga_corners_addr_offset + * offsets, u32 rotate_mode, + u32 mirr_mode) +{ + static enum e_rga_start_pos rot_mir_point_matrix[4][4] = { + { + LT, RT, LB, RB, + }, + { + RT, LT, RB, LB, + }, + { + RB, LB, RT, LT, + }, + { + LB, RB, LT, RT, + }, + }; + + if (!offsets) + return NULL; + + switch (rot_mir_point_matrix[rotate_mode][mirr_mode]) { + case LT: + return &offsets->left_top; + case LB: + return &offsets->left_bottom; + case RT: + return &offsets->right_top; + case RB: + return &offsets->right_bottom; + } + + return NULL; +} + +static void rga_cmd_set_src_addr(struct rga_ctx *ctx, void *mmu_pages) +{ + struct rockchip_rga *rga = ctx->rga; + u32 *dest = rga->cmdbuf_virt; + unsigned int reg; + + reg = RGA_MMU_SRC_BASE - RGA_MODE_BASE_REG; + dest[reg >> 2] = virt_to_phys(mmu_pages) >> 4; + + reg = RGA_MMU_CTRL1 - RGA_MODE_BASE_REG; + dest[reg >> 2] |= 0x7; +} + +static void rga_cmd_set_src1_addr(struct rga_ctx *ctx, void *mmu_pages) +{ + struct rockchip_rga *rga = ctx->rga; + u32 *dest = rga->cmdbuf_virt; + unsigned int reg; + + reg = RGA_MMU_SRC1_BASE - RGA_MODE_BASE_REG; + dest[reg >> 2] = virt_to_phys(mmu_pages) >> 4; + + reg = RGA_MMU_CTRL1 - RGA_MODE_BASE_REG; + dest[reg >> 2] |= 0x7 << 4; +} + +static void rga_cmd_set_dst_addr(struct rga_ctx *ctx, void *mmu_pages) +{ + struct rockchip_rga *rga = ctx->rga; + u32 *dest = rga->cmdbuf_virt; + unsigned int reg; + + reg = RGA_MMU_DST_BASE - RGA_MODE_BASE_REG; + dest[reg >> 2] = virt_to_phys(mmu_pages) >> 4; + + reg = RGA_MMU_CTRL1 - RGA_MODE_BASE_REG; + dest[reg >> 2] |= 0x7 << 8; +} + +static void rga_cmd_set_trans_info(struct rga_ctx *ctx) +{ + struct rockchip_rga *rga = ctx->rga; + u32 *dest = rga->cmdbuf_virt; + unsigned int scale_dst_w, scale_dst_h; + unsigned int src_h, src_w, src_x, src_y, dst_h, dst_w, dst_x, dst_y; + union rga_src_info src_info; + union rga_dst_info dst_info; + union rga_src_x_factor x_factor; + union rga_src_y_factor y_factor; + union rga_src_vir_info src_vir_info; + union rga_src_act_info src_act_info; + union rga_dst_vir_info dst_vir_info; + union rga_dst_act_info dst_act_info; + + struct rga_addr_offset *dst_offset; + struct rga_corners_addr_offset offsets; + struct rga_corners_addr_offset src_offsets; + + src_h = ctx->in.crop.height; + src_w = ctx->in.crop.width; + src_x = ctx->in.crop.left; + src_y = ctx->in.crop.top; + dst_h = ctx->out.crop.height; + dst_w = ctx->out.crop.width; + dst_x = ctx->out.crop.left; + dst_y = ctx->out.crop.top; + + src_info.val = dest[(RGA_SRC_INFO - RGA_MODE_BASE_REG) >> 2]; + dst_info.val = dest[(RGA_DST_INFO - RGA_MODE_BASE_REG) >> 2]; + x_factor.val = dest[(RGA_SRC_X_FACTOR - RGA_MODE_BASE_REG) >> 2]; + y_factor.val = dest[(RGA_SRC_Y_FACTOR - RGA_MODE_BASE_REG) >> 2]; + src_vir_info.val = dest[(RGA_SRC_VIR_INFO - RGA_MODE_BASE_REG) >> 2]; + src_act_info.val = dest[(RGA_SRC_ACT_INFO - RGA_MODE_BASE_REG) >> 2]; + dst_vir_info.val = dest[(RGA_DST_VIR_INFO - RGA_MODE_BASE_REG) >> 2]; + dst_act_info.val = dest[(RGA_DST_ACT_INFO - RGA_MODE_BASE_REG) >> 2]; + + src_info.data.format = ctx->in.fmt->hw_format; + src_info.data.swap = ctx->in.fmt->color_swap; + dst_info.data.format = ctx->out.fmt->hw_format; + dst_info.data.swap = ctx->out.fmt->color_swap; + + /* + * CSC mode must only be set when the colorspace families differ between + * input and output. It must remain unset (zeroed) if both are the same. + */ + + if (RGA_COLOR_FMT_IS_YUV(ctx->in.fmt->hw_format) && + RGA_COLOR_FMT_IS_RGB(ctx->out.fmt->hw_format)) { + switch (ctx->in.colorspace) { + case V4L2_COLORSPACE_REC709: + src_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0; + break; + default: + src_info.data.csc_mode = RGA_SRC_CSC_MODE_BT601_R0; + break; + } + } + + if (RGA_COLOR_FMT_IS_RGB(ctx->in.fmt->hw_format) && + RGA_COLOR_FMT_IS_YUV(ctx->out.fmt->hw_format)) { + switch (ctx->out.colorspace) { + case V4L2_COLORSPACE_REC709: + dst_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0; + break; + default: + dst_info.data.csc_mode = RGA_DST_CSC_MODE_BT601_R0; + break; + } + } + + if (ctx->vflip) + src_info.data.mir_mode |= RGA_SRC_MIRR_MODE_X; + + if (ctx->hflip) + src_info.data.mir_mode |= RGA_SRC_MIRR_MODE_Y; + + switch (ctx->rotate) { + case 90: + src_info.data.rot_mode = RGA_SRC_ROT_MODE_90_DEGREE; + break; + case 180: + src_info.data.rot_mode = RGA_SRC_ROT_MODE_180_DEGREE; + break; + case 270: + src_info.data.rot_mode = RGA_SRC_ROT_MODE_270_DEGREE; + break; + default: + src_info.data.rot_mode = RGA_SRC_ROT_MODE_0_DEGREE; + break; + } + + /* + * Calculate the up/down scaling mode/factor. + * + * RGA used to scale the picture first, and then rotate second, + * so we need to swap the w/h when rotate degree is 90/270. + */ + if (src_info.data.rot_mode == RGA_SRC_ROT_MODE_90_DEGREE || + src_info.data.rot_mode == RGA_SRC_ROT_MODE_270_DEGREE) { + if (rga->version.major == 0 || rga->version.minor == 0) { + if (dst_w == src_h) + src_h -= 8; + if (abs(src_w - dst_h) < 16) + src_w -= 16; + } + + scale_dst_h = dst_w; + scale_dst_w = dst_h; + } else { + scale_dst_w = dst_w; + scale_dst_h = dst_h; + } + + if (src_w == scale_dst_w) { + src_info.data.hscl_mode = RGA_SRC_HSCL_MODE_NO; + x_factor.val = 0; + } else if (src_w > scale_dst_w) { + src_info.data.hscl_mode = RGA_SRC_HSCL_MODE_DOWN; + x_factor.data.down_scale_factor = + rga_get_scaling(src_w, scale_dst_w) + 1; + } else { + src_info.data.hscl_mode = RGA_SRC_HSCL_MODE_UP; + x_factor.data.up_scale_factor = + rga_get_scaling(src_w - 1, scale_dst_w - 1); + } + + if (src_h == scale_dst_h) { + src_info.data.vscl_mode = RGA_SRC_VSCL_MODE_NO; + y_factor.val = 0; + } else if (src_h > scale_dst_h) { + src_info.data.vscl_mode = RGA_SRC_VSCL_MODE_DOWN; + y_factor.data.down_scale_factor = + rga_get_scaling(src_h, scale_dst_h) + 1; + } else { + src_info.data.vscl_mode = RGA_SRC_VSCL_MODE_UP; + y_factor.data.up_scale_factor = + rga_get_scaling(src_h - 1, scale_dst_h - 1); + } + + /* + * Calculate the framebuffer virtual strides and active size, + * note that the step of vir_stride / vir_width is 4 byte words + */ + src_vir_info.data.vir_stride = ctx->in.stride >> 2; + src_vir_info.data.vir_width = ctx->in.stride >> 2; + + src_act_info.data.act_height = src_h - 1; + src_act_info.data.act_width = src_w - 1; + + dst_vir_info.data.vir_stride = ctx->out.stride >> 2; + dst_act_info.data.act_height = dst_h - 1; + dst_act_info.data.act_width = dst_w - 1; + + /* + * Calculate the source framebuffer base address with offset pixel. + */ + src_offsets = rga_get_addr_offset(&ctx->in, src_x, src_y, + src_w, src_h); + + /* + * Configure the dest framebuffer base address with pixel offset. + */ + offsets = rga_get_addr_offset(&ctx->out, dst_x, dst_y, dst_w, dst_h); + dst_offset = rga_lookup_draw_pos(&offsets, src_info.data.rot_mode, + src_info.data.mir_mode); + + dest[(RGA_SRC_Y_RGB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] = + src_offsets.left_top.y_off; + dest[(RGA_SRC_CB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] = + src_offsets.left_top.u_off; + dest[(RGA_SRC_CR_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] = + src_offsets.left_top.v_off; + + dest[(RGA_SRC_X_FACTOR - RGA_MODE_BASE_REG) >> 2] = x_factor.val; + dest[(RGA_SRC_Y_FACTOR - RGA_MODE_BASE_REG) >> 2] = y_factor.val; + dest[(RGA_SRC_VIR_INFO - RGA_MODE_BASE_REG) >> 2] = src_vir_info.val; + dest[(RGA_SRC_ACT_INFO - RGA_MODE_BASE_REG) >> 2] = src_act_info.val; + + dest[(RGA_SRC_INFO - RGA_MODE_BASE_REG) >> 2] = src_info.val; + + dest[(RGA_DST_Y_RGB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] = + dst_offset->y_off; + dest[(RGA_DST_CB_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] = + dst_offset->u_off; + dest[(RGA_DST_CR_BASE_ADDR - RGA_MODE_BASE_REG) >> 2] = + dst_offset->v_off; + + dest[(RGA_DST_VIR_INFO - RGA_MODE_BASE_REG) >> 2] = dst_vir_info.val; + dest[(RGA_DST_ACT_INFO - RGA_MODE_BASE_REG) >> 2] = dst_act_info.val; + + dest[(RGA_DST_INFO - RGA_MODE_BASE_REG) >> 2] = dst_info.val; +} + +static void rga_cmd_set_mode(struct rga_ctx *ctx) +{ + struct rockchip_rga *rga = ctx->rga; + u32 *dest = rga->cmdbuf_virt; + union rga_mode_ctrl mode; + union rga_alpha_ctrl0 alpha_ctrl0; + union rga_alpha_ctrl1 alpha_ctrl1; + + mode.val = 0; + alpha_ctrl0.val = 0; + alpha_ctrl1.val = 0; + + mode.data.gradient_sat = 1; + mode.data.render = RGA_MODE_RENDER_BITBLT; + mode.data.bitblt = RGA_MODE_BITBLT_MODE_SRC_TO_DST; + + /* disable alpha blending */ + dest[(RGA_ALPHA_CTRL0 - RGA_MODE_BASE_REG) >> 2] = alpha_ctrl0.val; + dest[(RGA_ALPHA_CTRL1 - RGA_MODE_BASE_REG) >> 2] = alpha_ctrl1.val; + + dest[(RGA_MODE_CTRL - RGA_MODE_BASE_REG) >> 2] = mode.val; +} + +static void rga_cmd_set(struct rga_ctx *ctx) +{ + struct rockchip_rga *rga = ctx->rga; + + memset(rga->cmdbuf_virt, 0, RGA_CMDBUF_SIZE * 4); + + rga_cmd_set_src_addr(ctx, rga->src_mmu_pages); + /* + * Due to hardware bug, + * src1 mmu also should be configured when using alpha blending. + */ + rga_cmd_set_src1_addr(ctx, rga->dst_mmu_pages); + + rga_cmd_set_dst_addr(ctx, rga->dst_mmu_pages); + rga_cmd_set_mode(ctx); + + rga_cmd_set_trans_info(ctx); + + rga_write(rga, RGA_CMD_BASE, rga->cmdbuf_phy); + + /* sync CMD buf for RGA */ + dma_sync_single_for_device(rga->dev, rga->cmdbuf_phy, + PAGE_SIZE, DMA_BIDIRECTIONAL); +} + +void rga_hw_start(struct rockchip_rga *rga) +{ + struct rga_ctx *ctx = rga->curr; + + rga_cmd_set(ctx); + + rga_write(rga, RGA_SYS_CTRL, 0x00); + + rga_write(rga, RGA_SYS_CTRL, 0x22); + + rga_write(rga, RGA_INT, 0x600); + + rga_write(rga, RGA_CMD_CTRL, 0x1); +} -- cgit v1.2.3