From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../platform/samsung/exynos4-is/fimc-lite-reg.c | 346 +++++++++++++++++++++ 1 file changed, 346 insertions(+) create mode 100644 drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c (limited to 'drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c') diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c b/drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c new file mode 100644 index 000000000..57996b410 --- /dev/null +++ b/drivers/media/platform/samsung/exynos4-is/fimc-lite-reg.c @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Register interface file for EXYNOS FIMC-LITE (camera interface) driver + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki +*/ + +#include +#include +#include +#include + +#include "fimc-lite-reg.h" +#include "fimc-lite.h" +#include "fimc-core.h" + +#define FLITE_RESET_TIMEOUT 50 /* in ms */ + +void flite_hw_reset(struct fimc_lite *dev) +{ + unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT); + u32 cfg; + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg |= FLITE_REG_CIGCTRL_SWRST_REQ; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + while (time_is_after_jiffies(end)) { + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY) + break; + usleep_range(1000, 5000); + } + + cfg |= FLITE_REG_CIGCTRL_SWRST; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +void flite_hw_clear_pending_irq(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS); + cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM; + writel(cfg, dev->regs + FLITE_REG_CISTATUS); +} + +u32 flite_hw_get_interrupt_source(struct fimc_lite *dev) +{ + u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS); + return intsrc & FLITE_REG_CISTATUS_IRQ_MASK; +} + +void flite_hw_clear_last_capture_end(struct fimc_lite *dev) +{ + + u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2); + cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND; + writel(cfg, dev->regs + FLITE_REG_CISTATUS2); +} + +void flite_hw_set_interrupt_mask(struct fimc_lite *dev) +{ + u32 cfg, intsrc; + + /* Select interrupts to be enabled for each output mode */ + if (atomic_read(&dev->out_path) == FIMC_IO_DMA) { + intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | + FLITE_REG_CIGCTRL_IRQ_LASTEN | + FLITE_REG_CIGCTRL_IRQ_STARTEN | + FLITE_REG_CIGCTRL_IRQ_ENDEN; + } else { + /* An output to the FIMC-IS */ + intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | + FLITE_REG_CIGCTRL_IRQ_LASTEN; + } + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK; + cfg &= ~intsrc; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +void flite_hw_capture_start(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT); + cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN; + writel(cfg, dev->regs + FLITE_REG_CIIMGCPT); +} + +void flite_hw_capture_stop(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT); + cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN; + writel(cfg, dev->regs + FLITE_REG_CIIMGCPT); +} + +/* + * Test pattern (color bars) enable/disable. External sensor + * pixel clock must be active for the test pattern to work. + */ +void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + if (on) + cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR; + else + cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +static const u32 src_pixfmt_map[8][3] = { + { MEDIA_BUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR, + FLITE_REG_CIGCTRL_YUV422_1P }, + { MEDIA_BUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB, + FLITE_REG_CIGCTRL_YUV422_1P }, + { MEDIA_BUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY, + FLITE_REG_CIGCTRL_YUV422_1P }, + { MEDIA_BUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY, + FLITE_REG_CIGCTRL_YUV422_1P }, + { MEDIA_BUS_FMT_SGRBG8_1X8, 0, FLITE_REG_CIGCTRL_RAW8 }, + { MEDIA_BUS_FMT_SGRBG10_1X10, 0, FLITE_REG_CIGCTRL_RAW10 }, + { MEDIA_BUS_FMT_SGRBG12_1X12, 0, FLITE_REG_CIGCTRL_RAW12 }, + { MEDIA_BUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) }, +}; + +/* Set camera input pixel format and resolution */ +void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f) +{ + u32 pixelcode = f->fmt->mbus_code; + int i = ARRAY_SIZE(src_pixfmt_map); + u32 cfg; + + while (--i) { + if (src_pixfmt_map[i][0] == pixelcode) + break; + } + + if (i == 0 && src_pixfmt_map[i][0] != pixelcode) { + v4l2_err(&dev->ve.vdev, + "Unsupported pixel code, falling back to %#08x\n", + src_pixfmt_map[i][0]); + } + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK; + cfg |= src_pixfmt_map[i][2]; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + cfg = readl(dev->regs + FLITE_REG_CISRCSIZE); + cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK | + FLITE_REG_CISRCSIZE_SIZE_CAM_MASK); + cfg |= (f->f_width << 16) | f->f_height; + cfg |= src_pixfmt_map[i][1]; + writel(cfg, dev->regs + FLITE_REG_CISRCSIZE); +} + +/* Set the camera host input window offsets (cropping) */ +void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f) +{ + u32 hoff2, voff2; + u32 cfg; + + cfg = readl(dev->regs + FLITE_REG_CIWDOFST); + cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK; + cfg |= (f->rect.left << 16) | f->rect.top; + cfg |= FLITE_REG_CIWDOFST_WINOFSEN; + writel(cfg, dev->regs + FLITE_REG_CIWDOFST); + + hoff2 = f->f_width - f->rect.width - f->rect.left; + voff2 = f->f_height - f->rect.height - f->rect.top; + + cfg = (hoff2 << 16) | voff2; + writel(cfg, dev->regs + FLITE_REG_CIWDOFST2); +} + +/* Select camera port (A, B) */ +static void flite_hw_set_camera_port(struct fimc_lite *dev, int id) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL); + if (id == 0) + cfg &= ~FLITE_REG_CIGENERAL_CAM_B; + else + cfg |= FLITE_REG_CIGENERAL_CAM_B; + writel(cfg, dev->regs + FLITE_REG_CIGENERAL); +} + +/* Select serial or parallel bus, camera port (A,B) and set signals polarity */ +void flite_hw_set_camera_bus(struct fimc_lite *dev, + struct fimc_source_info *si) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + unsigned int flags = si->flags; + + if (si->sensor_bus_type != FIMC_BUS_TYPE_MIPI_CSI2) { + cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI | + FLITE_REG_CIGCTRL_INVPOLPCLK | + FLITE_REG_CIGCTRL_INVPOLVSYNC | + FLITE_REG_CIGCTRL_INVPOLHREF); + + if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) + cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + cfg |= FLITE_REG_CIGCTRL_INVPOLHREF; + } else { + cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI; + } + + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + flite_hw_set_camera_port(dev, si->mux_id); +} + +static void flite_hw_set_pack12(struct fimc_lite *dev, int on) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT); + + cfg &= ~FLITE_REG_CIODMAFMT_PACK12; + + if (on) + cfg |= FLITE_REG_CIODMAFMT_PACK12; + + writel(cfg, dev->regs + FLITE_REG_CIODMAFMT); +} + +static void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f) +{ + static const u32 pixcode[4][2] = { + { MEDIA_BUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR }, + { MEDIA_BUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB }, + { MEDIA_BUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY }, + { MEDIA_BUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY }, + }; + u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT); + int i = ARRAY_SIZE(pixcode); + + while (--i) + if (pixcode[i][0] == f->fmt->mbus_code) + break; + cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK; + writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT); +} + +void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f) +{ + u32 cfg; + + /* Maximum output pixel size */ + cfg = readl(dev->regs + FLITE_REG_CIOCAN); + cfg &= ~FLITE_REG_CIOCAN_MASK; + cfg |= (f->f_height << 16) | f->f_width; + writel(cfg, dev->regs + FLITE_REG_CIOCAN); + + /* DMA offsets */ + cfg = readl(dev->regs + FLITE_REG_CIOOFF); + cfg &= ~FLITE_REG_CIOOFF_MASK; + cfg |= (f->rect.top << 16) | f->rect.left; + writel(cfg, dev->regs + FLITE_REG_CIOOFF); +} + +void flite_hw_set_dma_buffer(struct fimc_lite *dev, struct flite_buffer *buf) +{ + unsigned int index; + u32 cfg; + + if (dev->dd->max_dma_bufs == 1) + index = 0; + else + index = buf->index; + + if (index == 0) + writel(buf->addr, dev->regs + FLITE_REG_CIOSA); + else + writel(buf->addr, dev->regs + FLITE_REG_CIOSAN(index - 1)); + + cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ); + cfg |= BIT(index); + writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ); +} + +void flite_hw_mask_dma_buffer(struct fimc_lite *dev, u32 index) +{ + u32 cfg; + + if (dev->dd->max_dma_bufs == 1) + index = 0; + + cfg = readl(dev->regs + FLITE_REG_CIFCNTSEQ); + cfg &= ~BIT(index); + writel(cfg, dev->regs + FLITE_REG_CIFCNTSEQ); +} + +/* Enable/disable output DMA, set output pixel size and offsets (composition) */ +void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f, + bool enable) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + + if (!enable) { + cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + return; + } + + cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + flite_hw_set_out_order(dev, f); + flite_hw_set_dma_window(dev, f); + flite_hw_set_pack12(dev, 0); +} + +void flite_hw_dump_regs(struct fimc_lite *dev, const char *label) +{ + struct { + u32 offset; + const char * const name; + } registers[] = { + { 0x00, "CISRCSIZE" }, + { 0x04, "CIGCTRL" }, + { 0x08, "CIIMGCPT" }, + { 0x0c, "CICPTSEQ" }, + { 0x10, "CIWDOFST" }, + { 0x14, "CIWDOFST2" }, + { 0x18, "CIODMAFMT" }, + { 0x20, "CIOCAN" }, + { 0x24, "CIOOFF" }, + { 0x30, "CIOSA" }, + { 0x40, "CISTATUS" }, + { 0x44, "CISTATUS2" }, + { 0xf0, "CITHOLD" }, + { 0xfc, "CIGENERAL" }, + }; + u32 i; + + v4l2_info(&dev->subdev, "--- %s ---\n", label); + + for (i = 0; i < ARRAY_SIZE(registers); i++) { + u32 cfg = readl(dev->regs + registers[i].offset); + v4l2_info(&dev->subdev, "%9s: 0x%08x\n", + registers[i].name, cfg); + } +} -- cgit v1.2.3