From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/platform/ti/davinci/vpif.c | 610 +++++++++++++++++++++++++++++++ 1 file changed, 610 insertions(+) create mode 100644 drivers/media/platform/ti/davinci/vpif.c (limited to 'drivers/media/platform/ti/davinci/vpif.c') diff --git a/drivers/media/platform/ti/davinci/vpif.c b/drivers/media/platform/ti/davinci/vpif.c new file mode 100644 index 000000000..da27da4c1 --- /dev/null +++ b/drivers/media/platform/ti/davinci/vpif.c @@ -0,0 +1,610 @@ +/* + * vpif - Video Port Interface driver + * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) + * that receiving video byte stream and two channels(2, 3) for video output. + * The hardware supports SDTV, HDTV formats, raw data capture. + * Currently, the driver supports NTSC and PAL standards. + * + * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); +MODULE_LICENSE("GPL"); + +#define VPIF_DRIVER_NAME "vpif" +MODULE_ALIAS("platform:" VPIF_DRIVER_NAME); + +#define VPIF_CH0_MAX_MODES 22 +#define VPIF_CH1_MAX_MODES 2 +#define VPIF_CH2_MAX_MODES 15 +#define VPIF_CH3_MAX_MODES 2 + +struct vpif_data { + struct platform_device *capture; + struct platform_device *display; +}; + +DEFINE_SPINLOCK(vpif_lock); +EXPORT_SYMBOL_GPL(vpif_lock); + +void __iomem *vpif_base; +EXPORT_SYMBOL_GPL(vpif_base); + +/* + * vpif_ch_params: video standard configuration parameters for vpif + * + * The table must include all presets from supported subdevices. + */ +const struct vpif_channel_config_params vpif_ch_params[] = { + /* HDTV formats */ + { + .name = "480p59_94", + .width = 720, + .height = 480, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 138-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 43, + .l5 = 523, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, + }, + { + .name = "576p50", + .width = 720, + .height = 576, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 144-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 45, + .l5 = 621, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, + }, + { + .name = "720p50", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 700-8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1280X720P50, + }, + { + .name = "720p60", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 370 - 8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1280X720P60, + }, + { + .name = "1080I50", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 720 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I50, + }, + { + .name = "1080I60", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, + }, + { + .name = "1080p60", + .width = 1920, + .height = 1080, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 42, + .l5 = 1122, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_timings = V4L2_DV_BT_CEA_1920X1080P60, + }, + + /* SDTV formats */ + { + .name = "NTSC_M", + .width = 720, + .height = 480, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 268, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 263, + .l7 = 266, + .l9 = 286, + .l11 = 525, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_525_60, + }, + { + .name = "PAL_BDGHIK", + .width = 720, + .height = 576, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 280, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 311, + .l7 = 313, + .l9 = 336, + .l11 = 624, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_625_50, + }, +}; +EXPORT_SYMBOL_GPL(vpif_ch_params); + +const unsigned int vpif_ch_params_count = ARRAY_SIZE(vpif_ch_params); +EXPORT_SYMBOL_GPL(vpif_ch_params_count); + +static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) +{ + if (val) + vpif_set_bit(reg, bit); + else + vpif_clr_bit(reg, bit); +} + +/* This structure is used to keep track of VPIF size register's offsets */ +struct vpif_registers { + u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; + u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; + u32 vanc1_size, width_mask, len_mask; + u8 max_modes; +}; + +static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { + /* Channel0 */ + { + VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, + VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, + VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH0_MAX_MODES, + }, + /* Channel1 */ + { + VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, + VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, + VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH1_MAX_MODES, + }, + /* Channel2 */ + { + VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, + VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, + VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, + VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH2_MAX_MODES + }, + /* Channel3 */ + { + VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, + VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, + VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, + VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH3_MAX_MODES + }, +}; + +/* vpif_set_mode_info: + * This function is used to set horizontal and vertical config parameters + * As per the standard in the channel, configure the values of L1, L3, + * L5, L7 L9, L11 in VPIF Register , also write width and height + */ +static void vpif_set_mode_info(const struct vpif_channel_config_params *config, + u8 channel_id, u8 config_channel_id) +{ + u32 value; + + value = (config->eav2sav & vpifregs[config_channel_id].width_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); + regw(value, vpifregs[channel_id].h_cfg); + + value = (config->l1 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l3 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_00); + + value = (config->l5 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l7 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_01); + + value = (config->l9 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l11 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_02); + + value = (config->vsize & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg); +} + +/* config_vpif_params + * Function to set the parameters of a channel + * Mainly modifies the channel ciontrol register + * It sets frame format, yc mux mode + */ +static void config_vpif_params(struct vpif_params *vpifparams, + u8 channel_id, u8 found) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + u32 value, ch_nip, reg; + u8 start, end; + int i; + + start = channel_id; + end = channel_id + found; + + for (i = start; i < end; i++) { + reg = vpifregs[i].ch_ctrl; + if (channel_id < 2) + ch_nip = VPIF_CAPTURE_CH_NIP; + else + ch_nip = VPIF_DISPLAY_CH_NIP; + + vpif_wr_bit(reg, ch_nip, config->frm_fmt); + vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); + vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, + vpifparams->video_params.storage_mode); + + /* Set raster scanning SDR Format */ + vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); + vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); + + if (channel_id > 1) /* Set the Pixel enable bit */ + vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); + else if (config->capture_format) { + /* Set the polarity of various pins */ + vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, + vpifparams->iface.fid_pol); + vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, + vpifparams->iface.vd_pol); + vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, + vpifparams->iface.hd_pol); + + value = regr(reg); + /* Set data width */ + value &= ~(0x3u << + VPIF_CH_DATA_WIDTH_BIT); + value |= ((vpifparams->params.data_sz) << + VPIF_CH_DATA_WIDTH_BIT); + regw(value, reg); + } + + /* Write the pitch in the driver */ + regw((vpifparams->video_params.hpitch), + vpifregs[i].line_offset); + } +} + +/* vpif_set_video_params + * This function is used to set video parameters in VPIF register + */ +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + int found = 1; + + vpif_set_mode_info(config, channel_id, channel_id); + if (!config->ycmux_mode) { + /* YC are on separate channels (HDTV formats) */ + vpif_set_mode_info(config, channel_id + 1, channel_id); + found = 2; + } + + config_vpif_params(vpifparams, channel_id, found); + + regw(0x80, VPIF_REQ_SIZE); + regw(0x01, VPIF_EMULATION_CTRL); + + return found; +} +EXPORT_SYMBOL(vpif_set_video_params); + +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id) +{ + u32 value; + + value = 0x3F8 & (vbiparams->hstart0); + value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); + regw(value, vpifregs[channel_id].vanc0_strt); + + value = 0x3F8 & (vbiparams->hstart1); + value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); + regw(value, vpifregs[channel_id].vanc1_strt); + + value = 0x3F8 & (vbiparams->hsize0); + value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); + regw(value, vpifregs[channel_id].vanc0_size); + + value = 0x3F8 & (vbiparams->hsize1); + value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); + regw(value, vpifregs[channel_id].vanc1_size); + +} +EXPORT_SYMBOL(vpif_set_vbi_display_params); + +int vpif_channel_getfid(u8 channel_id) +{ + return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) + >> VPIF_CH_FID_SHIFT; +} +EXPORT_SYMBOL(vpif_channel_getfid); + +static void vpif_pdev_release(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + + kfree(pdev); +} + +static int vpif_probe(struct platform_device *pdev) +{ + static struct resource res_irq; + struct platform_device *pdev_capture, *pdev_display; + struct device_node *endpoint = NULL; + struct vpif_data *data; + int ret; + int irq; + + vpif_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(vpif_base)) + return PTR_ERR(vpif_base); + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + platform_set_drvdata(pdev, data); + + pm_runtime_enable(&pdev->dev); + pm_runtime_get(&pdev->dev); + + /* + * If VPIF Node has endpoints, assume "new" DT support, + * where capture and display drivers don't have DT nodes + * so their devices need to be registered manually here + * for their legacy platform_drivers to work. + */ + endpoint = of_graph_get_next_endpoint(pdev->dev.of_node, + endpoint); + if (!endpoint) + return 0; + of_node_put(endpoint); + + /* + * For DT platforms, manually create platform_devices for + * capture/display drivers. + */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto err_put_rpm; + } + res_irq = (struct resource)DEFINE_RES_IRQ_NAMED(irq, of_node_full_name(pdev->dev.of_node)); + res_irq.flags |= irq_get_trigger_type(irq); + + pdev_capture = kzalloc(sizeof(*pdev_capture), GFP_KERNEL); + if (!pdev_capture) { + ret = -ENOMEM; + goto err_put_rpm; + } + + pdev_capture->name = "vpif_capture"; + pdev_capture->id = -1; + pdev_capture->resource = &res_irq; + pdev_capture->num_resources = 1; + pdev_capture->dev.dma_mask = pdev->dev.dma_mask; + pdev_capture->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; + pdev_capture->dev.parent = &pdev->dev; + pdev_capture->dev.release = vpif_pdev_release; + + ret = platform_device_register(pdev_capture); + if (ret) + goto err_put_pdev_capture; + + pdev_display = kzalloc(sizeof(*pdev_display), GFP_KERNEL); + if (!pdev_display) { + ret = -ENOMEM; + goto err_put_pdev_capture; + } + + pdev_display->name = "vpif_display"; + pdev_display->id = -1; + pdev_display->resource = &res_irq; + pdev_display->num_resources = 1; + pdev_display->dev.dma_mask = pdev->dev.dma_mask; + pdev_display->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; + pdev_display->dev.parent = &pdev->dev; + pdev_display->dev.release = vpif_pdev_release; + + ret = platform_device_register(pdev_display); + if (ret) + goto err_put_pdev_display; + + data->capture = pdev_capture; + data->display = pdev_display; + + return 0; + +err_put_pdev_display: + platform_device_put(pdev_display); +err_put_pdev_capture: + platform_device_put(pdev_capture); +err_put_rpm: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + kfree(data); + + return ret; +} + +static int vpif_remove(struct platform_device *pdev) +{ + struct vpif_data *data = platform_get_drvdata(pdev); + + if (data->capture) + platform_device_unregister(data->capture); + if (data->display) + platform_device_unregister(data->display); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int vpif_suspend(struct device *dev) +{ + pm_runtime_put(dev); + return 0; +} + +static int vpif_resume(struct device *dev) +{ + pm_runtime_get(dev); + return 0; +} + +static const struct dev_pm_ops vpif_pm = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_pm) +#else +#define vpif_pm_ops NULL +#endif + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id vpif_of_match[] = { + { .compatible = "ti,da850-vpif", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, vpif_of_match); +#endif + +static struct platform_driver vpif_driver = { + .driver = { + .of_match_table = of_match_ptr(vpif_of_match), + .name = VPIF_DRIVER_NAME, + .pm = vpif_pm_ops, + }, + .remove = vpif_remove, + .probe = vpif_probe, +}; + +static void vpif_exit(void) +{ + platform_driver_unregister(&vpif_driver); +} + +static int __init vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} +subsys_initcall(vpif_init); +module_exit(vpif_exit); + -- cgit v1.2.3