From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/radio/radio-gemtek.c | 340 +++++++++++++++++++++++++++++++++++++ 1 file changed, 340 insertions(+) create mode 100644 drivers/media/radio/radio-gemtek.c (limited to 'drivers/media/radio/radio-gemtek.c') diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c new file mode 100644 index 000000000..a532f63aa --- /dev/null +++ b/drivers/media/radio/radio-gemtek.c @@ -0,0 +1,340 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GemTek radio card driver + * + * Copyright 1998 Jonas Munsin + * + * GemTek hasn't released any specs on the card, so the protocol had to + * be reverse engineered with dosemu. + * + * Besides the protocol changes, this is mostly a copy of: + * + * RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff + * + * Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood + * Converted to new API by Alan Cox + * Various bugfixes and enhancements by Russell Kroll + * + * Converted to the radio-isa framework by Hans Verkuil + * Converted to V4L2 API by Mauro Carvalho Chehab + * + * Note: this card seems to swap the left and right audio channels! + * + * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool. + */ + +#include /* Modules */ +#include /* Initdata */ +#include /* request_region */ +#include /* udelay */ +#include /* kernel radio structs */ +#include +#include /* outb, outb_p */ +#include +#include +#include +#include +#include "radio-isa.h" + +/* + * Module info. + */ + +MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen "); +MODULE_DESCRIPTION("A driver for the GemTek Radio card."); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0.0"); + +/* + * Module params. + */ + +#ifndef CONFIG_RADIO_GEMTEK_PORT +#define CONFIG_RADIO_GEMTEK_PORT -1 +#endif +#ifndef CONFIG_RADIO_GEMTEK_PROBE +#define CONFIG_RADIO_GEMTEK_PROBE 1 +#endif + +#define GEMTEK_MAX 4 + +static bool probe = CONFIG_RADIO_GEMTEK_PROBE; +static bool hardmute; +static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT, + [1 ... (GEMTEK_MAX - 1)] = -1 }; +static int radio_nr[GEMTEK_MAX] = { [0 ... (GEMTEK_MAX - 1)] = -1 }; + +module_param(probe, bool, 0444); +MODULE_PARM_DESC(probe, "Enable automatic device probing."); + +module_param(hardmute, bool, 0644); +MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise."); + +module_param_array(io, int, NULL, 0444); +MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard)."); + +module_param_array(radio_nr, int, NULL, 0444); +MODULE_PARM_DESC(radio_nr, "Radio device numbers"); + +/* + * Frequency calculation constants. Intermediate frequency 10.52 MHz (nominal + * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz). + */ +#define FSCALE 8 +#define IF_OFFSET ((unsigned int)(10.52 * 16000 * (1<bu2614data = \ + ((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT)) + +/* + * Transmit settings to BU2614FS over GemTek IC. + */ +static void gemtek_bu2614_transmit(struct gemtek *gt) +{ + struct radio_isa_card *isa = >->isa; + int i, bit, q, mute; + + mute = gt->muted ? GEMTEK_MT : 0x00; + + outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io); + udelay(LONG_DELAY); + + for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) { + bit = (q & 1) ? GEMTEK_DA : 0; + outb_p(mute | GEMTEK_CE | bit, isa->io); + udelay(SHORT_DELAY); + outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io); + udelay(SHORT_DELAY); + } + + outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io); + udelay(SHORT_DELAY); +} + +/* + * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected). + */ +static unsigned long gemtek_convfreq(unsigned long freq) +{ + return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ; +} + +static struct radio_isa_card *gemtek_alloc(void) +{ + struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL); + + if (gt) + gt->muted = true; + return gt ? >->isa : NULL; +} + +/* + * Set FM-frequency. + */ +static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq) +{ + struct gemtek *gt = container_of(isa, struct gemtek, isa); + + if (hardmute && gt->muted) + return 0; + + gemtek_bu2614_set(gt, BU2614_PORT, 0); + gemtek_bu2614_set(gt, BU2614_FMES, 0); + gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ + gemtek_bu2614_set(gt, BU2614_SWAL, 0); + gemtek_bu2614_set(gt, BU2614_FMUN, 1); /* GT bit set */ + gemtek_bu2614_set(gt, BU2614_TEST, 0); + gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ); + gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq)); + gemtek_bu2614_transmit(gt); + return 0; +} + +/* + * Set mute flag. + */ +static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol) +{ + struct gemtek *gt = container_of(isa, struct gemtek, isa); + int i; + + gt->muted = mute; + if (hardmute) { + if (!mute) + return gemtek_s_frequency(isa, isa->freq); + + /* Turn off PLL, disable data output */ + gemtek_bu2614_set(gt, BU2614_PORT, 0); + gemtek_bu2614_set(gt, BU2614_FMES, 0); /* CT bit off */ + gemtek_bu2614_set(gt, BU2614_SWIN, 0); /* FM-mode */ + gemtek_bu2614_set(gt, BU2614_SWAL, 0); + gemtek_bu2614_set(gt, BU2614_FMUN, 0); /* GT bit off */ + gemtek_bu2614_set(gt, BU2614_TEST, 0); + gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF); + gemtek_bu2614_set(gt, BU2614_FREQ, 0); + gemtek_bu2614_transmit(gt); + return 0; + } + + /* Read bus contents (CE, CK and DA). */ + i = inb_p(isa->io); + /* Write it back with mute flag set. */ + outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io); + udelay(SHORT_DELAY); + return 0; +} + +static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa) +{ + if (inb_p(isa->io) & GEMTEK_NS) + return V4L2_TUNER_SUB_MONO; + return V4L2_TUNER_SUB_STEREO; +} + +/* + * Check if requested card acts like GemTek Radio card. + */ +static bool gemtek_probe(struct radio_isa_card *isa, int io) +{ + int i, q; + + q = inb_p(io); /* Read bus contents before probing. */ + /* Try to turn on CE, CK and DA respectively and check if card responds + properly. */ + for (i = 0; i < 3; ++i) { + outb_p(1 << i, io); + udelay(SHORT_DELAY); + + if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5)))) + return false; + } + outb_p(q >> 5, io); /* Write bus contents back. */ + udelay(SHORT_DELAY); + return true; +} + +static const struct radio_isa_ops gemtek_ops = { + .alloc = gemtek_alloc, + .probe = gemtek_probe, + .s_mute_volume = gemtek_s_mute_volume, + .s_frequency = gemtek_s_frequency, + .g_rxsubchans = gemtek_g_rxsubchans, +}; + +static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c }; + +#ifdef CONFIG_PNP +static const struct pnp_device_id gemtek_pnp_devices[] = { + /* AOpen FX-3D/Pro Radio */ + {.id = "ADS7183", .driver_data = 0}, + {.id = ""} +}; + +MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices); +#endif + +static struct radio_isa_driver gemtek_driver = { + .driver = { + .match = radio_isa_match, + .probe = radio_isa_probe, + .remove = radio_isa_remove, + .driver = { + .name = "radio-gemtek", + }, + }, +#ifdef CONFIG_PNP + .pnp_driver = { + .name = "radio-gemtek", + .id_table = gemtek_pnp_devices, + .probe = radio_isa_pnp_probe, + .remove = radio_isa_pnp_remove, + }, +#endif + .io_params = io, + .radio_nr_params = radio_nr, + .io_ports = gemtek_ioports, + .num_of_io_ports = ARRAY_SIZE(gemtek_ioports), + .region_size = 1, + .card = "GemTek Radio", + .ops = &gemtek_ops, + .has_stereo = true, +}; + +static int __init gemtek_init(void) +{ + gemtek_driver.probe = probe; +#ifdef CONFIG_PNP + pnp_register_driver(&gemtek_driver.pnp_driver); +#endif + return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX); +} + +static void __exit gemtek_exit(void) +{ + hardmute = true; /* Turn off PLL */ +#ifdef CONFIG_PNP + pnp_unregister_driver(&gemtek_driver.pnp_driver); +#endif + isa_unregister_driver(&gemtek_driver.driver); +} + +module_init(gemtek_init); +module_exit(gemtek_exit); -- cgit v1.2.3