From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/tuners/tda18250_priv.h | 136 +++++++++++++++++++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 drivers/media/tuners/tda18250_priv.h (limited to 'drivers/media/tuners/tda18250_priv.h') diff --git a/drivers/media/tuners/tda18250_priv.h b/drivers/media/tuners/tda18250_priv.h new file mode 100644 index 000000000..610d20831 --- /dev/null +++ b/drivers/media/tuners/tda18250_priv.h @@ -0,0 +1,136 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * NXP TDA18250BHN silicon tuner driver + * + * Copyright (C) 2017 Olli Salonen + */ + +#ifndef TDA18250_PRIV_H +#define TDA18250_PRIV_H + +#include "tda18250.h" + +#define R00_ID1 0x00 /* ID byte 1 */ +#define R01_ID2 0x01 /* ID byte 2 */ +#define R02_ID3 0x02 /* ID byte 3 */ +#define R03_THERMO1 0x03 /* Thermo byte 1 */ +#define R04_THERMO2 0x04 /* Thermo byte 2 */ +#define R05_POWER1 0x05 /* Power byte 1 */ +#define R06_POWER2 0x06 /* Power byte 2 */ +#define R07_GPIO 0x07 /* GPIO */ +#define R08_IRQ1 0x08 /* IRQ */ +#define R09_IRQ2 0x09 /* IRQ */ +#define R0A_IRQ3 0x0a /* IRQ */ +#define R0B_IRQ4 0x0b /* IRQ */ +#define R0C_AGC11 0x0c /* AGC1 byte 1 */ +#define R0D_AGC12 0x0d /* AGC1 byte 2 */ +#define R0E_AGC13 0x0e /* AGC1 byte 3 */ +#define R0F_AGC14 0x0f /* AGC1 byte 4 */ +#define R10_LT1 0x10 /* LT byte 1 */ +#define R11_LT2 0x11 /* LT byte 2 */ +#define R12_AGC21 0x12 /* AGC2 byte 1 */ +#define R13_AGC22 0x13 /* AGC2 byte 2 */ +#define R14_AGC23 0x14 /* AGC2 byte 3 */ +#define R15_AGC24 0x15 /* AGC2 byte 4 */ +#define R16_AGC25 0x16 /* AGC2 byte 5 */ +#define R17_AGC31 0x17 /* AGC3 byte 1 */ +#define R18_AGC32 0x18 /* AGC3 byte 2 */ +#define R19_AGC33 0x19 /* AGC3 byte 3 */ +#define R1A_AGCK 0x1a +#define R1B_GAIN1 0x1b +#define R1C_GAIN2 0x1c +#define R1D_GAIN3 0x1d +#define R1E_WI_FI 0x1e /* Wireless Filter */ +#define R1F_RF_BPF 0x1f /* RF Band Pass Filter */ +#define R20_IR_MIX 0x20 /* IR Mixer */ +#define R21_IF_AGC 0x21 +#define R22_IF1 0x22 /* IF byte 1 */ +#define R23_IF2 0x23 /* IF byte 2 */ +#define R24_IF3 0x24 /* IF byte 3 */ +#define R25_REF 0x25 /* reference byte */ +#define R26_IF 0x26 /* IF frequency */ +#define R27_RF1 0x27 /* RF frequency byte 1 */ +#define R28_RF2 0x28 /* RF frequency byte 2 */ +#define R29_RF3 0x29 /* RF frequency byte 3 */ +#define R2A_MSM1 0x2a +#define R2B_MSM2 0x2b +#define R2C_PS1 0x2c /* power saving mode byte 1 */ +#define R2D_PS2 0x2d /* power saving mode byte 2 */ +#define R2E_PS3 0x2e /* power saving mode byte 3 */ +#define R2F_RSSI1 0x2f +#define R30_RSSI2 0x30 +#define R31_IRQ_CTRL 0x31 +#define R32_DUMMY 0x32 +#define R33_TEST 0x33 +#define R34_MD1 0x34 +#define R35_SD1 0x35 +#define R36_SD2 0x36 +#define R37_SD3 0x37 +#define R38_SD4 0x38 +#define R39_SD5 0x39 +#define R3A_SD_TEST 0x3a +#define R3B_REGU 0x3b +#define R3C_RCCAL1 0x3c +#define R3D_RCCAL2 0x3d +#define R3E_IRCAL1 0x3e +#define R3F_IRCAL2 0x3f +#define R40_IRCAL3 0x40 +#define R41_IRCAL4 0x41 +#define R42_IRCAL5 0x42 +#define R43_PD1 0x43 /* power down byte 1 */ +#define R44_PD2 0x44 /* power down byte 2 */ +#define R45_PD 0x45 /* power down */ +#define R46_CPUMP 0x46 /* charge pump */ +#define R47_LNAPOL 0x47 /* LNA polar casc */ +#define R48_SMOOTH1 0x48 /* smooth test byte 1 */ +#define R49_SMOOTH2 0x49 /* smooth test byte 2 */ +#define R4A_SMOOTH3 0x4a /* smooth test byte 3 */ +#define R4B_XTALOSC1 0x4b +#define R4C_XTALOSC2 0x4c +#define R4D_XTALFLX1 0x4d +#define R4E_XTALFLX2 0x4e +#define R4F_XTALFLX3 0x4f +#define R50_XTALFLX4 0x50 +#define R51_XTALFLX5 0x51 +#define R52_IRLOOP0 0x52 +#define R53_IRLOOP1 0x53 +#define R54_IRLOOP2 0x54 +#define R55_IRLOOP3 0x55 +#define R56_IRLOOP4 0x56 +#define R57_PLL_LOG 0x57 +#define R58_AGC2_UP1 0x58 +#define R59_AGC2_UP2 0x59 +#define R5A_H3H5 0x5a +#define R5B_AGC_AUTO 0x5b +#define R5C_AGC_DEBUG 0x5c + +#define TDA18250_NUM_REGS 93 + +#define TDA18250_POWER_STANDBY 0 +#define TDA18250_POWER_NORMAL 1 + +#define TDA18250_IRQ_CAL 0x81 +#define TDA18250_IRQ_HW_INIT 0x82 +#define TDA18250_IRQ_TUNE 0x88 + +struct tda18250_dev { + struct mutex i2c_mutex; + struct dvb_frontend *fe; + struct i2c_adapter *i2c; + struct regmap *regmap; + u8 xtal_freq; + /* IF in kHz */ + u16 if_dvbt_6; + u16 if_dvbt_7; + u16 if_dvbt_8; + u16 if_dvbc_6; + u16 if_dvbc_8; + u16 if_atsc; + u16 if_frequency; + bool slave; + bool loopthrough; + bool warm; + u8 regs[TDA18250_NUM_REGS]; +}; + +#endif -- cgit v1.2.3