From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/usb/dvb-usb/Kconfig | 349 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 349 insertions(+) create mode 100644 drivers/media/usb/dvb-usb/Kconfig (limited to 'drivers/media/usb/dvb-usb/Kconfig') diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig new file mode 100644 index 000000000..f10fe27e2 --- /dev/null +++ b/drivers/media/usb/dvb-usb/Kconfig @@ -0,0 +1,349 @@ +# SPDX-License-Identifier: GPL-2.0-only +config DVB_USB + tristate "Support for various USB DVB devices" + depends on DVB_CORE && USB && I2C && RC_CORE + select CYPRESS_FIRMWARE + help + By enabling this you will be able to choose the various supported + USB1.1 and USB2.0 DVB devices. + + Almost every USB device needs a firmware, please look into + . + + For a complete list of supported USB devices see the LinuxTV DVB Wiki: + + + Say Y if you own a USB DVB device. + +config DVB_USB_DEBUG + bool "Enable extended debug support for all DVB-USB devices" + depends on DVB_USB + help + Say Y if you want to enable debugging. See modinfo dvb-usb (and the + appropriate drivers) for debug levels. + +if DVB_USB + +config DVB_USB_A800 + tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" + depends on DVB_USB + select DVB_USB_DIB3000MC + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. + +config DVB_USB_AF9005 + tristate "Afatech AF9005 DVB-T USB1.1 support" + depends on DVB_USB + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver + and the TerraTec Cinergy T USB XE (Rev.1) + +config DVB_USB_AF9005_REMOTE + tristate "Afatech AF9005 default remote control support" + depends on DVB_USB_AF9005 + help + Say Y here to support the default remote control decoding for the + Afatech AF9005 based receiver. + +config DVB_USB_AZ6027 + tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" + depends on DVB_USB + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AZ6027 device + +config DVB_USB_CINERGY_T2 + tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" + depends on DVB_USB + help + Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers + + Say Y if you own such a device and want to use it. + +config DVB_USB_CXUSB + tristate "Conexant USB2.0 hybrid reference design support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ATBM8830 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGS8GXX if MEDIA_SUBDRV_AUTOSELECT + select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MAX2165 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Conexant USB2.0 hybrid reference design. + DVB and ATSC modes are supported, for a basic analog mode support + see the next option ("Analog support for the Conexant USB2.0 hybrid + reference design"). + Devices that require this module: + + Medion MD95700 hybrid USB2.0 device. + DViCO FusionHDTV (Bluebird) USB2.0 devices + +config DVB_USB_CXUSB_ANALOG + bool "Analog support for the Conexant USB2.0 hybrid reference design" + depends on DVB_USB_CXUSB && VIDEO_DEV + depends on VIDEO_DEV=y || VIDEO_DEV=DVB_USB_CXUSB + select VIDEO_CX25840 + select VIDEOBUF2_VMALLOC + help + Say Y here to enable basic analog mode support for the Conexant + USB2.0 hybrid reference design. + Currently this mode is supported only on a Medion MD95700 device. + +config DVB_USB_DIB0700 + tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" + depends on DVB_USB + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_USB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA18250 if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The + USB bridge is also present in devices having the DiB7700 DVB-T-USB + silicon. This chip can be found in devices offered by Hauppauge, + Avermedia and other big and small companies. + + For an up-to-date list of devices supported by this driver, have a look + on the LinuxTV Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIB3000MC + tristate + depends on DVB_USB + select DVB_DIB3000MC + help + This is a module with helper functions for accessing the + DIB3000MC from USB DVB devices. It must be a separate module + in case DVB_USB is built-in and DVB_DIB3000MC is a module, + and gets selected automatically when needed. + +config DVB_USB_DIBUSB_MB + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB3000MB + depends on DVB_DIB3000MC || !DVB_DIB3000MC + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by + DiBcom () equipped with a DiB3000M-B demodulator. + + For an up-to-date list of devices supported by this driver, have a look + on the Linux-DVB Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIBUSB_MB_FAULTY + bool "Support faulty USB IDs" + depends on DVB_USB_DIBUSB_MB + help + Support for faulty USB IDs due to an invalid EEPROM on some Artec devices. + +config DVB_USB_DIBUSB_MC + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" + depends on DVB_USB + select DVB_USB_DIB3000MC + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB2.0 DVB-T receivers based on reference designs made by + DiBcom () equipped with a DiB3000M-C/P demodulator. + + For an up-to-date list of devices supported by this driver, have a look + on the Linux-DVB Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIGITV + tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. + +config DVB_USB_DTT200U + tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" + depends on DVB_USB + help + Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. + + The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). + + The WT-220U and its clones are pen-sized. + +config DVB_USB_DTV5100 + tristate "AME DTV-5100 USB2.0 DVB-T support" + depends on DVB_USB + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. + +config DVB_USB_DW2102 + tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + select DVB_M88RS2000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the DvbWorld, TeVii, Prof, TechnoTrend + DVB-S/S2 USB2.0 receivers. + +config DVB_USB_GP8PSK + tristate "GENPIX 8PSK->USB module support" + depends on DVB_USB + help + Say Y here to support the + GENPIX 8psk module + + DVB-S USB2.0 receivers. + +config DVB_USB_M920X + tristate "Uli m920x DVB-T USB2.0 support" + depends on DVB_USB + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. + Currently, only devices with a product id of + "DTV USB MINI" (in cold state) are supported. + Firmware required. + +config DVB_USB_NOVA_T_USB2 + tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" + depends on DVB_USB + select DVB_USB_DIB3000MC + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. + +config DVB_USB_OPERA1 + tristate "Opera1 DVB-S USB2.0 receiver" + depends on DVB_USB + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Opera DVB-S USB2.0 receiver. + +config DVB_USB_PCTV452E + tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600" + depends on DVB_USB + select TTPCI_EEPROM + select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + help + Support for external USB adapter designed by Pinnacle, + shipped under the brand name 'PCTV HDTV Pro USB'. + Also supports TT Connect S2-3600/3650 cards. + Say Y if you own such a device and want to use it. + +config DVB_USB_TECHNISAT_USB2 + tristate "Technisat DVB-S/S2 USB2.0 support" + depends on DVB_USB + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Technisat USB2 DVB-S/S2 device + +config DVB_USB_TTUSB2 + tristate "Pinnacle 400e DVB-S USB2.0 support" + depends on DVB_USB + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and + the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The + firmware protocol used by this module is similar to the one used by the + old ttusb-driver - that's why the module is called dvb-usb-ttusb2. + +config DVB_USB_UMT_010 + tristate "HanfTek UMT-010 DVB-T USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_USB_DIB3000MC + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. + +config DVB_USB_VP702X + tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + + TwinhanDTV StarBox, + DigitalRise USB Starbox and + TYPHOON DVB-S USB 2.0 BOX + + DVB-S USB2.0 receivers. + +config DVB_USB_VP7045 + tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + + TwinhanDTV Alpha (stick) (VP-7045), + TwinhanDTV MagicBox II (VP-7046), + DigitalNow TinyUSB 2 DVB-t, + DigitalRise USB 2.0 Ter (Beetle) and + TYPHOON DVB-T USB DRIVE + + DVB-T USB2.0 receivers. + +endif -- cgit v1.2.3