From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/media/usb/dvb-usb/ttusb2.c | 849 +++++++++++++++++++++++++++++++++++++ 1 file changed, 849 insertions(+) create mode 100644 drivers/media/usb/dvb-usb/ttusb2.c (limited to 'drivers/media/usb/dvb-usb/ttusb2.c') diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c new file mode 100644 index 000000000..373ffa7f6 --- /dev/null +++ b/drivers/media/usb/dvb-usb/ttusb2.c @@ -0,0 +1,849 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones + * (e.g. Pinnacle 400e DVB-S USB2.0). + * + * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes. + * + * TDA8263 + TDA10086 + * + * I2C addresses: + * 0x08 - LNBP21PD - LNB power supply + * 0x0e - TDA10086 - Demodulator + * 0x50 - FX2 eeprom + * 0x60 - TDA8263 - Tuner + * 0x78 ??? + * + * Copyright (c) 2002 Holger Waechtler + * Copyright (c) 2003 Felix Domke + * Copyright (C) 2005-6 Patrick Boettcher + * + * see Documentation/driver-api/media/drivers/dvb-usb.rst for more information + */ +#define DVB_USB_LOG_PREFIX "ttusb2" +#include "dvb-usb.h" + +#include "ttusb2.h" + +#include "tda826x.h" +#include "tda10086.h" +#include "tda1002x.h" +#include "tda10048.h" +#include "tda827x.h" +#include "lnbp21.h" +/* CA */ +#include + +/* debug */ +static int dvb_usb_ttusb2_debug; +#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args) +module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); +static int dvb_usb_ttusb2_debug_ci; +module_param_named(debug_ci,dvb_usb_ttusb2_debug_ci, int, 0644); +MODULE_PARM_DESC(debug_ci, "set debugging ci." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define ci_dbg(format, arg...) \ +do { \ + if (dvb_usb_ttusb2_debug_ci) \ + printk(KERN_DEBUG DVB_USB_LOG_PREFIX \ + ": %s " format "\n" , __func__, ## arg); \ +} while (0) + +enum { + TT3650_CMD_CI_TEST = 0x40, + TT3650_CMD_CI_RD_CTRL, + TT3650_CMD_CI_WR_CTRL, + TT3650_CMD_CI_RD_ATTR, + TT3650_CMD_CI_WR_ATTR, + TT3650_CMD_CI_RESET, + TT3650_CMD_CI_SET_VIDEO_PORT +}; + +struct ttusb2_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + u8 id; + u16 last_rc_key; +}; + +static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, + u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + struct ttusb2_state *st = d->priv; + u8 *s, *r = NULL; + int ret = 0; + + if (4 + rlen > 64) + return -EIO; + + s = kzalloc(wlen+4, GFP_KERNEL); + if (!s) + return -ENOMEM; + + r = kzalloc(64, GFP_KERNEL); + if (!r) { + kfree(s); + return -ENOMEM; + } + + s[0] = 0xaa; + s[1] = ++st->id; + s[2] = cmd; + s[3] = wlen; + memcpy(&s[4],wbuf,wlen); + + ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0); + + if (ret != 0 || + r[0] != 0x55 || + r[1] != s[1] || + r[2] != cmd || + (rlen > 0 && r[3] != rlen)) { + warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]); + kfree(s); + kfree(r); + return -EIO; + } + + if (rlen > 0) + memcpy(rbuf, &r[4], rlen); + + kfree(s); + kfree(r); + + return 0; +} + +/* ci */ +static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) +{ + int ret; + u8 rx[60];/* (64 -4) */ + ret = ttusb2_msg(d, cmd, data, write_len, rx, read_len); + if (!ret) + memcpy(data, rx, read_len); + return ret; +} + +static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) +{ + struct dvb_usb_device *d = ca->data; + struct ttusb2_state *state = d->priv; + int ret; + + mutex_lock(&state->ca_mutex); + ret = tt3650_ci_msg(d, cmd, data, write_len, read_len); + mutex_unlock(&state->ca_mutex); + + return ret; +} + +static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + u8 buf[3]; + int ret = 0; + + if (slot) + return -EINVAL; + + buf[0] = (address >> 8) & 0x0F; + buf[1] = address; + + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3); + + ci_dbg("%04x -> %d 0x%02x", address, ret, buf[2]); + + if (ret < 0) + return ret; + + return buf[2]; +} + +static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + u8 buf[3]; + + ci_dbg("%d 0x%04x 0x%02x", slot, address, value); + + if (slot) + return -EINVAL; + + buf[0] = (address >> 8) & 0x0F; + buf[1] = address; + buf[2] = value; + + return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3); +} + +static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + u8 buf[2]; + int ret; + + if (slot) + return -EINVAL; + + buf[0] = address & 3; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2); + + ci_dbg("0x%02x -> %d 0x%02x", address, ret, buf[1]); + + if (ret < 0) + return ret; + + return buf[1]; +} + +static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + u8 buf[2]; + + ci_dbg("%d 0x%02x 0x%02x", slot, address, value); + + if (slot) + return -EINVAL; + + buf[0] = address; + buf[1] = value; + + return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2); +} + +static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, int slot, int enable) +{ + u8 buf[1]; + int ret; + + ci_dbg("%d %d", slot, enable); + + if (slot) + return -EINVAL; + + buf[0] = enable; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); + if (ret < 0) + return ret; + + if (enable != buf[0]) { + err("CI not %sabled.", enable ? "en" : "dis"); + return -EIO; + } + + return 0; +} + +static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + return tt3650_ci_set_video_port(ca, slot, 0); +} + +static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + return tt3650_ci_set_video_port(ca, slot, 1); +} + +static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = ca->data; + struct ttusb2_state *state = d->priv; + u8 buf[1]; + int ret; + + ci_dbg("%d", slot); + + if (slot) + return -EINVAL; + + buf[0] = 0; + + mutex_lock(&state->ca_mutex); + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); + if (ret) + goto failed; + + msleep(500); + + buf[0] = 1; + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); + if (ret) + goto failed; + + msleep(500); + + buf[0] = 0; /* FTA */ + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); + + msleep(1100); + + failed: + mutex_unlock(&state->ca_mutex); + + return ret; +} + +static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + u8 buf[1]; + int ret; + + if (slot) + return -EINVAL; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1); + if (ret) + return ret; + + if (1 == buf[0]) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + } + return 0; +} + +static void tt3650_ci_uninit(struct dvb_usb_device *d) +{ + struct ttusb2_state *state; + + ci_dbg(""); + + if (NULL == d) + return; + + state = d->priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + + memset(&state->ca, 0, sizeof(state->ca)); +} + +static int tt3650_ci_init(struct dvb_usb_adapter *a) +{ + struct dvb_usb_device *d = a->dev; + struct ttusb2_state *state = d->priv; + int ret; + + ci_dbg(""); + + mutex_init(&state->ca_mutex); + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem; + state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem; + state->ca.read_cam_control = tt3650_ci_read_cam_control; + state->ca.write_cam_control = tt3650_ci_write_cam_control; + state->ca.slot_reset = tt3650_ci_slot_reset; + state->ca.slot_shutdown = tt3650_ci_slot_shutdown; + state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable; + state->ca.poll_slot_status = tt3650_ci_poll_slot_status; + state->ca.data = d; + + ret = dvb_ca_en50221_init(&a->dvb_adap, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (ret) { + err("Cannot initialize CI: Error %d.", ret); + memset(&state->ca, 0, sizeof(state->ca)); + return ret; + } + + info("CI initialized."); + + return 0; +} + +static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + static u8 obuf[60], ibuf[60]; + int i, write_read, read; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD); + read = msg[i].flags & I2C_M_RD; + + if (3 + msg[i].len > sizeof(obuf)) { + err("i2c wr len=%d too high", msg[i].len); + break; + } + if (write_read) { + if (3 + msg[i+1].len > sizeof(ibuf)) { + err("i2c rd len=%d too high", msg[i+1].len); + break; + } + } else if (read) { + if (3 + msg[i].len > sizeof(ibuf)) { + err("i2c rd len=%d too high", msg[i].len); + break; + } + } + + obuf[0] = (msg[i].addr << 1) | (write_read | read); + if (read) + obuf[1] = 0; + else + obuf[1] = msg[i].len; + + /* read request */ + if (write_read) + obuf[2] = msg[i+1].len; + else if (read) + obuf[2] = msg[i].len; + else + obuf[2] = 0; + + memcpy(&obuf[3], msg[i].buf, msg[i].len); + + if (ttusb2_msg(d, CMD_I2C_XFER, obuf, obuf[1]+3, ibuf, obuf[2] + 3) < 0) { + err("i2c transfer failed."); + break; + } + + if (write_read) { + memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len); + i++; + } else if (read) + memcpy(msg[i].buf, &ibuf[3], msg[i].len); + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 ttusb2_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm ttusb2_i2c_algo = { + .master_xfer = ttusb2_i2c_xfer, + .functionality = ttusb2_i2c_func, +}; + +/* command to poll IR receiver (copied from pctv452e.c) */ +#define CMD_GET_IR_CODE 0x1b + +/* IR */ +static int tt3650_rc_query(struct dvb_usb_device *d) +{ + int ret; + u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */ + struct ttusb2_state *st = d->priv; + ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx)); + if (ret != 0) + return ret; + + if (rx[8] & 0x01) { + /* got a "press" event */ + st->last_rc_key = RC_SCANCODE_RC5(rx[3], rx[2]); + deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]); + rc_keydown(d->rc_dev, RC_PROTO_RC5, st->last_rc_key, rx[1]); + } else if (st->last_rc_key) { + rc_keyup(d->rc_dev); + st->last_rc_key = 0; + } + + return 0; +} + + +/* Callbacks for DVB USB */ +static int ttusb2_identify_state(struct usb_device *udev, + const struct dvb_usb_device_properties *props, + const struct dvb_usb_device_description **desc, + int *cold) +{ + *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; + return 0; +} + +static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b = onoff; + ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0); + return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0); +} + + +static struct tda10086_config tda10086_config = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, +}; + +static struct tda10023_config tda10023_config = { + .demod_address = 0x0c, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xa511, +}; + +static struct tda10048_config tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_4000, + .dtv7_if_freq_khz = TDA10048_IF_4500, + .dtv8_if_freq_khz = TDA10048_IF_5000, + .clk_freq_khz = TDA10048_CLK_16000, + .no_firmware = 1, + .set_pll = true , + .pll_m = 5, + .pll_n = 3, + .pll_p = 0, +}; + +static struct tda827x_config tda827x_config = { + .config = 0, +}; + +static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev,0,3) < 0) + err("set interface to alts=3 failed"); + + if ((adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) { + deb_info("TDA10086 attach failed\n"); + return -ENODEV; + } + + return 0; +} + +static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + + return adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, enable); +} + +static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 3) < 0) + err("set interface to alts=3 failed"); + + if (adap->fe_adap[0].fe == NULL) { + /* FE 0 DVB-C */ + adap->fe_adap[0].fe = dvb_attach(tda10023_attach, + &tda10023_config, &adap->dev->i2c_adap, 0x48); + + if (adap->fe_adap[0].fe == NULL) { + deb_info("TDA10023 attach failed\n"); + return -ENODEV; + } + tt3650_ci_init(adap); + } else { + adap->fe_adap[1].fe = dvb_attach(tda10048_attach, + &tda10048_config, &adap->dev->i2c_adap); + + if (adap->fe_adap[1].fe == NULL) { + deb_info("TDA10048 attach failed\n"); + return -ENODEV; + } + + /* tuner is behind TDA10023 I2C-gate */ + adap->fe_adap[1].fe->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl; + + } + + return 0; +} + +static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + + /* MFE: select correct FE to attach tuner since that's called twice */ + if (adap->fe_adap[1].fe == NULL) + fe = adap->fe_adap[0].fe; + else + fe = adap->fe_adap[1].fe; + + /* attach tuner */ + if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) { + printk(KERN_ERR "%s: No tda827x found!\n", __func__); + return -ENODEV; + } + return 0; +} + +static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap) +{ + if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) { + deb_info("TDA8263 attach failed\n"); + return -ENODEV; + } + + if (dvb_attach(lnbp21_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, 0, 0) == NULL) { + deb_info("LNBP21 attach failed\n"); + return -ENODEV; + } + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties ttusb2_properties; +static struct dvb_usb_device_properties ttusb2_properties_s2400; +static struct dvb_usb_device_properties ttusb2_properties_ct3650; + +static void ttusb2_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + + tt3650_ci_uninit(d); + dvb_usb_device_exit(intf); +} + +static int ttusb2_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (0 == dvb_usb_device_init(intf, &ttusb2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650, + THIS_MODULE, NULL, adapter_nr)) + return 0; + return -ENODEV; +} + +enum { + PINNACLE_PCTV_400E, + PINNACLE_PCTV_450E, + TECHNOTREND_CONNECT_S2400, + TECHNOTREND_CONNECT_CT3650, + TECHNOTREND_CONNECT_S2400_8KEEPROM, +}; + +static struct usb_device_id ttusb2_table[] = { + DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_400E), + DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_450E), + DVB_USB_DEV(TECHNOTREND, TECHNOTREND_CONNECT_S2400), + DVB_USB_DEV(TECHNOTREND, TECHNOTREND_CONNECT_CT3650), + DVB_USB_DEV(TECHNOTREND, TECHNOTREND_CONNECT_S2400_8KEEPROM), + { } +}; + +MODULE_DEVICE_TABLE (usb, ttusb2_table); + +static struct dvb_usb_device_properties ttusb2_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-pctv-400e-01.fw", + + .size_of_priv = sizeof(struct ttusb2_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = NULL, // ttusb2_streaming_ctrl, + + .frontend_attach = ttusb2_frontend_tda10086_attach, + .tuner_attach = ttusb2_tuner_tda826x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }}, + } + }, + + .power_ctrl = ttusb2_power_ctrl, + .identify_state = ttusb2_identify_state, + + .i2c_algo = &ttusb2_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 2, + .devices = { + { "Pinnacle 400e DVB-S USB2.0", + { &ttusb2_table[PINNACLE_PCTV_400E], NULL }, + { NULL }, + }, + { "Pinnacle 450e DVB-S USB2.0", + { &ttusb2_table[PINNACLE_PCTV_450E], NULL }, + { NULL }, + }, + } +}; + +static struct dvb_usb_device_properties ttusb2_properties_s2400 = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-tt-s2400-01.fw", + + .size_of_priv = sizeof(struct ttusb2_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_tda10086_attach, + .tuner_attach = ttusb2_tuner_tda826x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }}, + } + }, + + .power_ctrl = ttusb2_power_ctrl, + .identify_state = ttusb2_identify_state, + + .i2c_algo = &ttusb2_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 2, + .devices = { + { "Technotrend TT-connect S-2400", + { &ttusb2_table[TECHNOTREND_CONNECT_S2400], NULL }, + { NULL }, + }, + { "Technotrend TT-connect S-2400 (8kB EEPROM)", + { &ttusb2_table[TECHNOTREND_CONNECT_S2400_8KEEPROM], NULL }, + { NULL }, + }, + } +}; + +static struct dvb_usb_device_properties ttusb2_properties_ct3650 = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct ttusb2_state), + + .rc.core = { + .rc_interval = 150, /* Less than IR_KEYPRESS_TIMEOUT */ + .rc_codes = RC_MAP_TT_1500, + .rc_query = tt3650_rc_query, + .allowed_protos = RC_PROTO_BIT_RC5, + }, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 2, + .fe = {{ + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_tda10023_attach, + .tuner_attach = ttusb2_tuner_tda827x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }, { + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_tda10023_attach, + .tuner_attach = ttusb2_tuner_tda827x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }}, + }, + }, + + .power_ctrl = ttusb2_power_ctrl, + .identify_state = ttusb2_identify_state, + + .i2c_algo = &ttusb2_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Technotrend TT-connect CT-3650", + .warm_ids = { &ttusb2_table[TECHNOTREND_CONNECT_CT3650], NULL }, + }, + } +}; + +static struct usb_driver ttusb2_driver = { + .name = "dvb_usb_ttusb2", + .probe = ttusb2_probe, + .disconnect = ttusb2_usb_disconnect, + .id_table = ttusb2_table, +}; + +module_usb_driver(ttusb2_driver); + +MODULE_AUTHOR("Patrick Boettcher "); +MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3